Swiftinfo: Extract and analyze The Evolution Of An iOS App's Code

SwiftInfo

Note: I don't intend to ship further updates to this tool.

SwiftInfo is a CLI tool that extracts, tracks and analyzes metrics that are useful for Swift apps. Besides the default tracking options that are shipped with the tool, you can also customize SwiftInfo to track pretty much anything that can be conveyed in a simple .swift script.

By default SwiftInfo will assume you're extracting info from a release build and send the final results to Slack, but it can be used to extract info from individual pull requests as well with the danger-SwiftInfo danger plugin.

Available Providers

Type Name	Description
📦 IPASizeProvider	Size of the .ipa archive (not the App Store size!)
📊 CodeCoverageProvider	Code coverage percentage
👶 TargetCountProvider	Number of targets (dependencies)
🎯 TestCountProvider	Sum of all test target's test count
⚠️ WarningCountProvider	Number of warnings in a build
🧙‍♂️ OBJCFileCountProvider	Number of OBJ-C files and headers (for mixed OBJ-C / Swift projects)
⏰ LongestTestDurationProvider	The name and duration of the longest test
🛏 TotalTestDurationProvider	Time it took to build and run all tests
🖼 LargestAssetCatalogProvider	The name and size of the largest asset catalog
🎨 TotalAssetCatalogsSizeProvider	The sum of the size of all asset catalogs
💻 LinesOfCodeProvider	Executable lines of code
🚚 ArchiveDurationProvider	Time it took to build and archive the app
📷 LargestAssetProvider	The largest asset in the project. Only considers files inside asset catalogs.

Each provider may have a specific set of requirements in order for them to work. Check their documentation to learn more.

Usage

SwiftInfo extracts information by analyzing the logs that your build system generates when you build and/or test your app. Because it requires these logs to work, SwiftInfo is meant to be used alongside a build automation tool like fastlane. The following topics describe how you can retrieve these logs and setup SwiftInfo itself.

We'll show how to get the logs first as you'll need them to configure SwiftInfo.

Note: This repository contains an example project. Check it out to see the tool in action -- just go to the example project folder and run make swiftinfo in your terminal.

Retrieving raw logs with fastlane

If you use fastlane, you can expose raw logs to SwiftInfo by adding the buildlog_path argument to scan (test logs) and gym (build logs). Here's a simple example of a fastlane lane that runs tests, submits an archive to TestFlight and runs SwiftInfo (make sure to edit the folder paths to what's being used by your project):

desc "Submits a new beta build and runs SwiftInfo"
lane :beta do
  # Run tests, copying the raw logs to the project folder
  scan(
    scheme: "MyScheme",
    buildlog_path: "./build/tests_log"
  )

  # Archive the app, copying the raw logs to the project folder and the .ipa to the /build folder
  gym(
    workspace: "MyApp.xcworkspace",
    scheme: "Release",
    output_directory: "build",
    buildlog_path: "./build/build_log"
  )

  # Send to TestFlight
  pilot(
      skip_waiting_for_build_processing: true
  )

  # Run the CocoaPods version of SwiftInfo
  sh("../Pods/SwiftInfo/bin/swiftinfo")

  # Commit and push SwiftInfo's output
  sh("git add ../SwiftInfo-output/SwiftInfoOutput.json")
  sh("git commit -m \"[ci skip] Updating SwiftInfo Output JSON\"")
  push_to_git_remote
end

Retrieving raw logs manually

An alternative that doesn't require fastlane is to simply manually run xcodebuild / xctest and pipe the output to a file. We don't recommend doing this in a real project, but it can be useful if you just want to test the tool without having to setup fastlane.

xcodebuild -workspace ./Example.xcworkspace -scheme Example 2>&1 | tee ./build/build_log/Example-Release.log

Configuring SwiftInfo

SwiftInfo itself is configured by creating a Infofile.swift file in your project's root. Here's an example one with a detailed explanation:

import SwiftInfoCore

// Use `FileUtils` to configure the path of your logs. 
// If you're retrieving them with fastlane and don't know what the name of the log files are going to be, 
// just run it once to have it create them.

FileUtils.buildLogFilePath = "./build/build_log/MyApp-MyConfig.log"
FileUtils.testLogFilePath = "./build/tests_log/MyApp-MyConfig.log"

// Now, create a `SwiftInfo` instance by passing your project's information.

let projectInfo = ProjectInfo(xcodeproj: "MyApp.xcodeproj",
                              target: "MyTarget",
                              configuration: "MyConfig")

let api = SwiftInfo(projectInfo: projectInfo)

// Use SwiftInfo's `extract()` method to extract and append all the information you want into a single property.

let output = api.extract(IPASizeProvider.self) +
             api.extract(WarningCountProvider.self) +
             api.extract(TestCountProvider.self) +
             api.extract(TargetCountProvider.self, args: .init(mode: .complainOnRemovals)) +
             api.extract(CodeCoverageProvider.self, args: .init(targets: ["NetworkModule", "MyApp"])) +
             api.extract(LinesOfCodeProvider.self, args: .init(targets: ["NetworkModule", "MyApp"]))

// Lastly, process the output.

if isInPullRequestMode {
    // If called from danger-SwiftInfo, print the results to the pull request
    api.print(output: output)
} else {
    // If called manually, send the results to Slack...
    api.sendToSlack(output: output, webhookUrl: url)
    // ...and save the output to your repo so it serves as the basis for new comparisons.
    api.save(output: output)
}

Saving and visualizing the data

After successfully extracting data, you should call api.save(output: output) to have SwiftInfo add/update a json file in the {Infofile path}/SwiftInfo-output folder. It's important to add this file to version control after the running the tool as this is what SwiftInfo uses to compare new pieces of information.

You can then use SwiftInfo-Reader to transform this output into a more visual static HTML page.

Customizing Providers

To be able to support different types of projects, SwiftInfo provides customization options to some providers. See the documentation for each provider to see what it supports. If you wish to track something that's not handled by the default providers, you can also create your own providers. Click here to see how.

Customizing Runs

Any arguments you pass to SwiftInfo can be inspected inside your Infofile. This allows you to pass any custom information you want to the binary and use it to customize your runs.

For example, if you run SwiftInfo by calling swiftinfo --myCustomArgument, you can use ProcessInfo to check for its presence inside your Infofile.

if ProcessInfo.processInfo.arguments.contains("--myCustomArgument") {
    print("Yay, custom arguments!")
}

If the argument has a value, you can also fetch that value with UserDefaults.

Installation

CocoaPods

pod 'SwiftInfo'

Homebrew

To install SwiftInfo with Homebrew the first time, simply run these commands:

brew tap rockbruno/SwiftInfo https://github.com/rockbruno/SwiftInfo.git
brew install rockbruno/SwiftInfo/swiftinfo

To update to the newest Homebrew version of SwiftInfo when you have an old version already installed, run:

brew upgrade swiftinfo

Manually

Download the latest release and unzip the contents somewhere in your project's folder.

Swift Package Manager

SwiftPM is currently not supported due to the need of shipping additional files with the binary, which SwiftPM does not support. We might find a solution for this, but for now there's no way to use the tool with it.

Download Details:

Author: Rockbruno
Source Code: https://github.com/rockbruno/SwiftInfo 
License: MIT license

#swift #cli #ios #tools #xcode 

What is GEEK

Buddha Community

How to Use Hotwire Rails

Introduction

We are back with another exciting and much-talked-about Rails tutorial on how to use Hotwire with the Rails application. This Hotwire Rails tutorial is an alternate method for building modern web applications that consume a pinch of JavaScript.

Rails 7 Hotwire is the default front-end framework shipped with Rails 7 after it was launched. It is used to represent HTML over the wire in the Rails application. Previously, we used to add a hotwire-rails gem in our gem file and then run rails hotwire: install. However, with the introduction of Rails 7, the gem got deprecated. Now, we use turbo-rails and stimulus rails directly, which work as Hotwire’s SPA-like page accelerator and Hotwire’s modest JavaScript framework.

What is Hotwire?

Hotwire is a package of different frameworks that help to build applications. It simplifies the developer’s work for writing web pages without the need to write JavaScript, and instead sending HTML code over the wire.

Introduction to The Hotwire Framework:

1. Turbo:

It uses simplified techniques to build web applications while decreasing the usage of JavaScript in the application. Turbo offers numerous handling methods for the HTML data sent over the wire and displaying the application’s data without actually loading the entire page. It helps to maintain the simplicity of web applications without destroying the single-page application experience by using the below techniques:

Turbo Frames: Turbo Frames help to load the different sections of our markup without any dependency as it divides the page into different contexts separately called frames and updates these frames individually.
Turbo Drive: Every link doesn’t have to make the entire page reload when clicked. Only the HTML contained within the tag will be displayed.
Turbo Streams: To add real-time features to the application, this technique is used. It helps to bring real-time data to the application using CRUD actions.

2. Stimulus

It represents the JavaScript framework, which is required when JS is a requirement in the application. The interaction with the HTML is possible with the help of a stimulus, as the controllers that help those interactions are written by a stimulus.

3. Strada

Not much information is available about Strada as it has not been officially released yet. However, it works with native applications, and by using HTML bridge attributes, interaction is made possible between web applications and native apps.

Simple diagrammatic representation of Hotwire Stack:

Prerequisites For Hotwire Rails Tutorial

As we are implementing the Ruby on Rails Hotwire tutorial, make sure about the following installations before you can get started.

• Ruby on Rails
• Hotwire gem
• PostgreSQL/SQLite (choose any one database)
• Turbo Rails
• Stimulus.js

Looking for an enthusiastic team of ROR developers to shape the vision of your web project?
Contact Bacancy today and hire Ruby developers to start building your dream project!

Create a new Rails Project

Find the following commands to create a rails application.

mkdir ~/projects/railshotwire
cd ~/projects/railshotwire
echo "source 'https://rubygems.org'" > Gemfile
echo "gem 'rails', '~> 7.0.0'" >> Gemfile
bundle install  
bundle exec rails new . --force -d=postgresql

Now create some files for the project, up till now no usage of Rails Hotwire can be seen.
Fire the following command in your terminal.

• For creating a default controller for the application

echo "class HomeController < ApplicationController" > app/controllers/home_controller.rb
echo "end" >> app/controllers/home_controller.rb

• For creating another controller for the application

echo "class OtherController < ApplicationController" > app/controllers/other_controller.rb
echo "end" >> app/controllers/home_controller.rb

• For creating routes for the application

echo "Rails.application.routes.draw do" > config/routes.rb
echo '  get "home/index"' >> config/routes.rb
echo '  get "other/index"' >> config/routes.rb
echo '  root to: "home#index"' >> config/routes.rb
echo 'end' >> config/routes.rb

• For creating a default view for the application

mkdir app/views/home
echo '<h1>This is Rails Hotwire homepage</h1>' > app/views/home/index.html.erb
echo '<div><%= link_to "Enter to other page", other_index_path %></div>' >> app/views/home/index.html.erb

• For creating another view for the application

mkdir app/views/other
echo '<h1>This is Another page</h1>' > app/views/other/index.html.erb
echo '<div><%= link_to "Enter to home page", root_path %></div>' >> app/views/other/index.html.erb

• For creating a database and schema.rb file for the application

bin/rails db:create
bin/rails db:migrate

• For checking the application run bin/rails s and open your browser, your running application will have the below view.

Additionally, you can clone the code and browse through the project. Here’s the source code of the repository: Rails 7 Hotwire application

Now, let’s see how Hotwire Rails can work its magic with various Turbo techniques.

Hotwire Rails: Turbo Drive

Go to your localhost:3000 on your web browser and right-click on the Inspect and open a Network tab of the DevTools of the browser.

Now click on go to another page link that appears on the home page to redirect from the home page to another page. In our Network tab, we can see that this action of navigation is achieved via XHR. It appears only the part inside HTML is reloaded, here neither the CSS is reloaded nor the JS is reloaded when the navigation action is performed.

By performing this action we can see that Turbo Drive helps to represent the HTML response without loading the full page and only follows redirect and reindeer HTML responses which helps to make the application faster to access.

Hotwire Rails: Turbo Frame

This technique helps to divide the current page into different sections called frames that can be updated separately independently when new data is added from the server.
Below we discuss the different use cases of Turbo frame like inline edition, sorting, searching, and filtering of data.

Let’s perform some practical actions to see the example of these use cases.

Make changes in the app/controllers/home_controller.rb file

#CODE

class HomeController < ApplicationController
   def turbo_frame_form
   end
   
   def turbo_frame submit
      extracted_anynumber = params[:any][:anynumber]
      render :turbo_frame_form, status: :ok, locals: {anynumber: extracted_anynumber,      comment: 'turbo_frame_submit ok' }
   end
end

Add app/views/home/turbo_frame_form.html.erb file to the application and add this content inside the file.

#CODE

<section>

    <%= turbo_frame_tag 'anyframe' do %>
            
      <div>
          <h2>Frame view</h2>
          <%= form_with scope: :any, url: turbo_frame_submit_path, local: true do |form| %>
              <%= form.label :anynumber, 'Type an integer (odd or even)', 'class' => 'my-0  d-inline'  %>
              <%= form.text_field :anynumber, type: 'number', 'required' => 'true', 'value' => "#{local_assigns[:anynumber] || 0}",  'aria-describedby' => 'anynumber' %>
              <%= form.submit 'Submit this number', 'id' => 'submit-number' %>
          <% end %>
      </div>
      <div>
        <h2>Data of the view</h2>
        <pre style="font-size: .7rem;"><%= JSON.pretty_generate(local_assigns) %></pre> 
      </div>
      
    <% end %>

</section>

Make some adjustments in routes.rb

#CODE

Rails.application.routes.draw do
  get 'home/index'
  get 'other/index'

  get '/home/turbo_frame_form' => 'home#turbo_frame_form', as: 'turbo_frame_form'
  post '/home/turbo_frame_submit' => 'home#turbo_frame_submit', as: 'turbo_frame_submit'


  root to: "home#index"
end

• Next step is to change homepage view in app/views/home/index.html.erb

#CODE

<h1>This is Rails Hotwire home page</h1>
<div><%= link_to "Enter to other page", other_index_path %></div>

<%= turbo_frame_tag 'anyframe' do %>        
  <div>
      <h2>Home view</h2>
      <%= form_with scope: :any, url: turbo_frame_submit_path, local: true do |form| %>
          <%= form.label :anynumber, 'Type an integer (odd or even)', 'class' => 'my-0  d-inline'  %>
          <%= form.text_field :anynumber, type: 'number', 'required' => 'true', 'value' => "#{local_assigns[:anynumber] || 0}",  'aria-describedby' => 'anynumber' %>
          <%= form.submit 'Submit this number', 'id' => 'submit-number' %>
      <% end %>
  <div>
<% end %>

After making all the changes, restart the rails server and refresh the browser, the default view will appear on the browser.

Now in the field enter any digit, after entering the digit click on submit button, and as the submit button is clicked we can see the Turbo Frame in action in the below screen, we can observe that the frame part changed, the first title and first link didn’t move.

Hotwire Rails: Turbo Streams

Turbo Streams deliver page updates over WebSocket, SSE or in response to form submissions by only using HTML and a series of CRUD-like operations, you are free to say that either

• Update the piece of HTML while responding to all the other actions like the post, put, patch, and delete except the GET action.
• Transmit a change to all users, without reloading the browser page.

This transmit can be represented by a simple example.

• Make changes in app/controllers/other_controller.rb file of rails application

#CODE

class OtherController < ApplicationController

  def post_something
    respond_to do |format|
      format.turbo_stream {  }
    end
  end

   end

Add the below line in routes.rb file of the application

#CODE

post '/other/post_something' => 'other#post_something', as: 'post_something'

Superb! Rails will now attempt to locate the app/views/other/post_something.turbo_stream.erb template at any moment the ‘/other/post_something’ endpoint is reached.

For this, we need to add app/views/other/post_something.turbo_stream.erb template in the rails application.

#CODE

<turbo-stream action="append" target="messages">
  <template>
    <div id="message_1">This changes the existing message!</div>
  </template>
</turbo-stream>

This states that the response will try to append the template of the turbo frame with ID “messages”.

Now change the index.html.erb file in app/views/other paths with the below content.

#CODE

<h1>This is Another page</h1>
<div><%= link_to "Enter to home page", root_path %></div>

<div style="margin-top: 3rem;">
  <%= form_with scope: :any, url: post_something_path do |form| %>
      <%= form.submit 'Post any message %>
  <% end %>
  <turbo-frame id="messages">
    <div>An empty message</div>
  </turbo-frame>
</div>

• After making all the changes, restart the rails server and refresh the browser, and go to the other page.

• Once the above screen appears, click on the Post any message button

This action shows that after submitting the response, the Turbo Streams help the developer to append the message, without reloading the page.

Another use case we can test is that rather than appending the message, the developer replaces the message. For that, we need to change the content of app/views/other/post_something.turbo_stream.erb template file and change the value of the action attribute from append to replace and check the changes in the browser.

#CODE

<turbo-stream action="replace" target="messages">
  <template>
    <div id="message_1">This changes the existing message!</div>
  </template>
</turbo-stream>

When we click on Post any message button, the message that appear below that button will get replaced with the message that is mentioned in the app/views/other/post_something.turbo_stream.erb template

Stimulus

There are some cases in an application where JS is needed, therefore to cover those scenarios we require Hotwire JS tool. Hotwire has a JS tool because in some scenarios Turbo-* tools are not sufficient. But as we know that Hotwire is used to reduce the usage of JS in an application, Stimulus considers HTML as the single source of truth. Consider the case where we have to give elements on a page some JavaScript attributes, such as data controller, data-action, and data target. For that, a stimulus controller that can access elements and receive events based on those characteristics will be created.

Make a change in app/views/other/index.html.erb template file in rails application

#CODE

<h1>This is Another page</h1>
<div><%= link_to "Enter to home page", root_path %></div>

<div style="margin-top: 2rem;">
  <%= form_with scope: :any, url: post_something_path do |form| %>
      <%= form.submit 'Post something' %>
  <% end %>
  <turbo-frame id="messages">
    <div>An empty message</div>
  </turbo-frame>
</div>

<div style="margin-top: 2rem;">
  <h2>Stimulus</h2>  
  <div data-controller="hello">
    <input data-hello-target="name" type="text">
    <button data-action="click->hello#greet">
      Greet
    </button>
    <span data-hello-target="output">
    </span>
  </div>
</div>

Make changes in the hello_controller.js in path app/JavaScript/controllers and add a stimulus controller in the file, which helps to bring the HTML into life.

#CODE

import { Controller } from "@hotwired/stimulus"

export default class extends Controller {
  static targets = [ "name", "output" ]

  greet() {
    this.outputTarget.textContent =
      `Hello, ${this.nameTarget.value}!`
  }
}

Go to your browser after making the changes in the code and click on Enter to other page link which will navigate to the localhost:3000/other/index page there you can see the changes implemented by the stimulus controller that is designed to augment your HTML with just enough behavior to make it more responsive.

With just a little bit of work, Turbo and Stimulus together offer a complete answer for applications that are quick and compelling.

Using Rails 7 Hotwire helps to load the pages at a faster speed and allows you to render templates on the server, where you have access to your whole domain model. It is a productive development experience in ROR, without compromising any of the speed or responsiveness associated with SPA.

Conclusion

We hope you were satisfied with our Rails Hotwire tutorial. Write to us at service@bacancy.com for any query that you want to resolve, or if you want us to share a tutorial on your query.

For more such solutions on RoR, check out our Ruby on Rails Tutorials. We will always strive to amaze you and cater to your needs.

Original article source at: https://www.bacancytechnology.com/

#rails #ruby 

How long does it take to develop/build an app?

With more of us using smartphones, the popularity of mobile applications has exploded. In the digital era, the number of people looking for products and services online is growing rapidly. Smartphone owners look for mobile applications that give them quick access to companies’ products and services. As a result, mobile apps provide customers with a lot of benefits in just one device.

Likewise, companies use mobile apps to increase customer loyalty and improve their services. Mobile Developers are in high demand as companies use apps not only to create brand awareness but also to gather information. For that reason, mobile apps are used as tools to collect valuable data from customers to help companies improve their offer.

There are many types of mobile applications, each with its own advantages. For example, native apps perform better, while web apps don’t need to be customized for the platform or operating system (OS). Likewise, hybrid apps provide users with comfortable user experience. However, you may be wondering how long it takes to develop an app.

To give you an idea of how long the app development process takes, here’s a short guide.

App Idea & Research

_Average time spent: two to five weeks _

This is the initial stage and a crucial step in setting the project in the right direction. In this stage, you brainstorm ideas and select the best one. Apart from that, you’ll need to do some research to see if your idea is viable. Remember that coming up with an idea is easy; the hard part is to make it a reality.

All your ideas may seem viable, but you still have to run some tests to keep it as real as possible. For that reason, when Web Developers are building a web app, they analyze the available ideas to see which one is the best match for the targeted audience.

Targeting the right audience is crucial when you are developing an app. It saves time when shaping the app in the right direction as you have a clear set of objectives. Likewise, analyzing how the app affects the market is essential. During the research process, App Developers must gather information about potential competitors and threats. This helps the app owners develop strategies to tackle difficulties that come up after the launch.

The research process can take several weeks, but it determines how successful your app can be. For that reason, you must take your time to know all the weaknesses and strengths of the competitors, possible app strategies, and targeted audience.

The outcomes of this stage are app prototypes and the minimum feasible product.

#android app #frontend #ios app #minimum viable product (mvp) #mobile app development #web development #android app development #app development #app development for ios and android #app development process #ios and android app development #ios app development #stages in app development

What Is R Programming Language? introduction & Basics

In this R article, we will learn about What Is R Programming Language? introduction & Basics. R is a programming language developed by Ross Ihaka and Robert Gentleman in 1993. R possesses an extensive catalog of statistical and graphical methods. It includes machine learning algorithms, linear regression, time series, statistical inference to name a few. Most of the R libraries are written in R, but for heavy computational tasks, C, C++, and Fortran codes are preferred.

Data analysis with R is done in a series of steps; programming, transforming, discovering, modeling and communicating the results

• Program: R is a clear and accessible programming tool
• Transform: R is made up of a collection of libraries designed specifically for data science
• Discover: Investigate the data, refine your hypothesis and analyze them
• Model: R provides a wide array of tools to capture the right model for your data
• Communicate: Integrate codes, graphs, and outputs to a report with R Markdown or build Shiny apps to share with the world.

What is R used for?

• Statistical inference
• Data analysis
• Machine learning algorithm

As conclusion, R is the world’s most widely used statistics programming language. It’s the 1st choice of data scientists and supported by a vibrant and talented community of contributors. R is taught in universities and deployed in mission-critical business applications.

R-environment setup

Windows Installation – We can download the Windows installer version of R from R-3.2.2 for windows (32/64)
 

As it is a Windows installer (.exe) with the name “R-version-win.exe”. You can just double click and run the installer accepting the default settings. If your Windows is a 32-bit version, it installs the 32-bit version. But if your windows are 64-bit, then it installs both the 32-bit and 64-bit versions.

After installation, you can locate the icon to run the program in a directory structure “R\R3.2.2\bin\i386\Rgui.exe” under the Windows Program Files. Clicking this icon brings up the R-GUI which is the R console to do R Programming. 
 

R basic Syntax

R Programming is a very popular programming language that is broadly used in data analysis. The way in which we define its code is quite simple. The “Hello World!” is the basic program for all the languages, and now we will understand the syntax of R programming with the “Hello world” program. We can write our code either in the command prompt, or we can use an R script file.

R command prompt

Once you have R environment setup, then it’s easy to start your R command prompt by just typing the following command at your command prompt −
$R
This will launch R interpreter and you will get a prompt > where you can start typing your program as follows −
 

>myString <- "Hello, World"
>print (myString)
[1] "Hello, World!"

Here the first statement defines a string variable myString, where we assign a string “Hello, World!” and then the next statement print() is being used to print the value stored in myString variable.

R data-types

While doing programming in any programming language, you need to use various variables to store various information. Variables are nothing but reserved memory locations to store values. This means that when you create a variable you reserve some space in memory.

In contrast to other programming languages like C and java in R, the variables are not declared as some data type. The variables are assigned with R-Objects and the data type of the R-object becomes the data type of the variable. There are many types of R-objects. The frequently used ones are −

• Vectors
• Lists
• Matrices
• Arrays
• Factors
• Data Frames

Vectors

#create a vector and find the elements which are >5
v<-c(1,2,3,4,5,6,5,8)
v[v>5]

#subset
subset(v,v>5)

#position in the vector created in which square of the numbers of v is >10 holds good
which(v*v>10)

#to know the values 
v[v*v>10]

Output: [1] 6 8 Output: [1] 6 8 Output: [1] 4 5 6 7 8 Output: [1] 4 5 6 5 8

Matrices

A matrix is a two-dimensional rectangular data set. It can be created using a vector input to the matrix function.

#matrices: a vector with two dimensional attributes
mat<-matrix(c(1,2,3,4))
 
mat1<-matrix(c(1,2,3,4),nrow=2)
mat1

Output:     [,1] [,2] [1,]    1    3 [2,]    2    4

mat2<-matrix(c(1,2,3,4),ncol=2,byrow=T)
mat2

Output:       [,1] [,2] [1,]    1    2 [2,]    3    4

mat3<-matrix(c(1,2,3,4),byrow=T)
mat3

#transpose of matrix
mattrans<-t(mat)
mattrans

#create a character matrix called fruits with elements apple, orange, pear, grapes
fruits<-matrix(c("apple","orange","pear","grapes"),2)
#create 3×4 matrix of marks obtained in each quarterly exams for 4 different subjects 
X<-matrix(c(50,70,40,90,60, 80,50, 90,100, 50,30, 70),nrow=3)
X

#give row names and column names
rownames(X)<-paste(prefix="Test.",1:3)
subs<-c("Maths", "English", "Science", "History")
colnames(X)<-subs
X

Output:       [,1]  [1,]    1  [2,]    2  [3,]    3  [4,]    4 Output:      [,1] [,2] [,3] [,4]  [1,]    1    2    3    4 Output:      [,1] [,2] [,3] [,4]  [1,]   50   90   50   50  [2,]   70   60   90   30  [3,]   40   80  100   70 Output:   Maths English Science History  Test. 1    50      90      50      50  Test. 2    70      60      90      30  Test. 3    40      80     100      70

Arrays

While matrices are confined to two dimensions, arrays can be of any number of dimensions. The array function takes a dim attribute which creates the required number of dimensions. In the below example we create an array with two elements which are 3×3 matrices each.

#Arrays
arr<-array(1:24,dim=c(3,4,2))
arr

#create an array using alphabets with dimensions 3 rows, 2 columns and 3 arrays
arr1<-array(letters[1:18],dim=c(3,2,3))

#select only 1st two matrix of an array
arr1[,,c(1:2)]

#LIST
X<-list(u=2, n='abc')
X
X$u

 [,1] [,2] [,3] [,4]

 [,1] [,2] [,3] [,4]

 [,1] [,2]

 [,1] [,2]

Dataframes

Data frames are tabular data objects. Unlike a matrix in a data frame, each column can contain different modes of data. The first column can be numeric while the second column can be character and the third column can be logical. It is a list of vectors of equal length.

#Dataframes
students<-c("J","L","M","K","I","F","R","S")
Subjects<-rep(c("science","maths"),each=2)
marks<-c(55,70,66,85,88,90,56,78)
data<-data.frame(students,Subjects,marks)
#Accessing dataframes
data[[1]]

data$Subjects
data[,1]

Output: [1] J L M K I F R S Levels: F I J K L M R S Output:   data$Subjects   [1] science science maths   maths   science science maths   maths     Levels: maths science 

Factors

Factors are the r-objects which are created using a vector. It stores the vector along with the distinct values of the elements in the vector as labels. The labels are always character irrespective of whether it is numeric or character or Boolean etc. in the input vector. They are useful in statistical modeling.

Factors are created using the factor() function. The nlevels function gives the count of levels.

#Factors
x<-c(1,2,3)
factor(x)

#apply function
data1<-data.frame(age=c(55,34,42,66,77),bmi=c(26,25,21,30,22))
d<-apply(data1,2,mean)
d

#create two vectors age and gender and find mean age with respect to gender
age<-c(33,34,55,54)
gender<-factor(c("m","f","m","f"))
tapply(age,gender,mean)

Output: [1] 1 2 3 Levels: 1 2 3 Output:  age  bmi 54.8 24.8 Output:  f  m         44 44

R Variables

A variable provides us with named storage that our programs can manipulate. A variable in R can store an atomic vector, a group of atomic vectors, or a combination of many R objects. A valid variable name consists of letters, numbers, and the dot or underlines characters.

Rules for writing Identifiers in R

1. Identifiers can be a combination of letters, digits, period (.), and underscore (_).
2. It must start with a letter or a period. If it starts with a period, it cannot be followed by a digit.
3. Reserved words in R cannot be used as identifiers.

Valid identifiers in R

total, sum, .fine.with.dot, this_is_acceptable, Number5

Invalid identifiers in R

tot@l, 5um, _fine, TRUE, .0ne

Best Practices

Earlier versions of R used underscore (_) as an assignment operator. So, the period (.) was used extensively in variable names having multiple words. Current versions of R support underscore as a valid identifier but it is good practice to use a period as word separators.
For example, a.variable.name is preferred over a_variable_name or alternatively we could use camel case as aVariableName.

Constants in R

Constants, as the name suggests, are entities whose value cannot be altered. Basic types of constant are numeric constants and character constants.

Numeric Constants

All numbers fall under this category. They can be of type integer, double or complex. It can be checked with the typeof() function.
Numeric Constants followed by L are regarded as integers and those followed by i are regarded as complex.

> typeof(5)
> typeof(5L)
> typeof(5L)

[1] “double” [1] “double” [[1] “double”

Character Constants

Character constants can be represented using either single quotes (‘) or double quotes (“) as delimiters.

> 'example'
> typeof("5")

[1] "example" [1] "character"

R Operators

Operators – Arithmetic, Relational, Logical, Assignment, and some of the Miscellaneous Operators that R programming language provides. 

There are four main categories of Operators in the R programming language.

1. Arithmetic Operators
2. Relational Operators
3. Logical Operators
4. Assignment Operators
5. Mixed Operators

x <- 35
y<-10

   x+y       > x-y     > x*y       > x/y      > x%/%y     > x%%y   > x^y   [1] 45      [1] 25    [1] 350    [1] 3.5      [1] 3      [1] 5 [1]2.75e+15 

Logical Operators

The below table shows the logical operators in R. Operators & and | perform element-wise operation producing result having a length of the longer operand. But && and || examines only the first element of the operands resulting in a single length logical vector.

a <- c(TRUE,TRUE,FALSE,0,6,7)
b <- c(FALSE,TRUE,FALSE,TRUE,TRUE,TRUE)
a&b 
[1] FALSE TRUE FALSE FALSE TRUE TRUE
a&&b
[1] FALSE
> a|b
[1] TRUE TRUE FALSE TRUE TRUE TRUE
> a||b
[1] TRUE
> !a
[1] FALSE FALSE TRUE TRUE FALSE FALSE
> !b
[1] TRUE FALSE TRUE FALSE FALSE FALSE

R functions

Functions are defined using the function() directive and are stored as R objects just like anything else. In particular, they are R objects of class “function”. Here’s a simple function that takes no arguments simply prints ‘Hi statistics’.

#define the function
f <- function() {
print("Hi statistics!!!")
}
#Call the function
f()

Output: [1] "Hi statistics!!!"

Now let’s define a function called standardize, and the function has a single argument x which is used in the body of a function.

#Define the function that will calculate standardized score.
standardize = function(x) {
m = mean(x)
sd = sd(x)
result = (x – m) / sd
result
}
input<- c(40:50) #Take input for what we want to calculate a standardized score.
standardize(input) #Call the function

Output:   standardize(input) #Call the function   [1] -1.5075567 -1.2060454 -0.9045340 -0.6030227 -0.3015113 0.0000000 0.3015113 0.6030227 0.9045340 1.2060454 1.5075567 

Loop Functions

R has some very useful functions which implement looping in a compact form to make life easier. The very rich and powerful family of applied functions is made of intrinsically vectorized functions. These functions in R allow you to apply some function to a series of objects (eg. vectors, matrices, data frames, or files). They include:

1. lapply(): Loop over a list and evaluate a function on each element
2. sapply(): Same as lapply but try to simplify the result
3. apply(): Apply a function over the margins of an array
4. tapply(): Apply a function over subsets of a vector
5. mapply(): Multivariate version of lapply

There is another function called split() which is also useful, particularly in conjunction with lapply.

R Vectors

A vector is a sequence of data elements of the same basic type. Members in a vector are officially called components. Vectors are the most basic R data objects and there are six types of atomic vectors. They are logical, integer, double, complex, character, and raw.

The c() function can be used to create vectors of objects by concatenating things together. 
x <- c(1,2,3,4,5) #double
x #If you use only x auto-printing occurs
l <- c(TRUE, FALSE) #logical
l <- c(T, F) ## logical
c <- c("a", "b", "c", "d") ## character
i <- 1:20 ## integer
cm <- c(2+2i, 3+3i) ## complex
print(l)
print(c)
print(i)
print(cm)

You can see the type of each vector using typeof() function in R.
typeof(x)
typeof(l)
typeof(c)
typeof(i)
typeof(cm)

Output: print(l) [1] TRUE FALSE   print(c)   [1] "a" "b" "c" "d"   print(i)   [1] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20   print(cm)   [1] 2+2i 3+3i Output: typeof(x) [1] "double"   typeof(l)   [1] "logical"   typeof(c)   [1] "character"   typeof(i)   [1] "integer"   typeof(cm)   [1] "complex" 

Creating a vector using seq() function:

We can use the seq() function to create a vector within an interval by specifying step size or specifying the length of the vector. 

seq(1:10) #By default it will be incremented by 1
seq(1, 20, length.out=5) # specify length of the vector
seq(1, 20, by=2) # specify step size

Output: > seq(1:10) #By default it will be incremented by 1 [1] 1 2 3 4 5 6 7 8 9 10 > seq(1, 20, length.out=5) # specify length of the vector [1] 1.00 5.75 10.50 15.25 20.00 > seq(1, 20, by=2) # specify step size [1] 1 3 5 7 9 11 13 15 17 19

Extract Elements from a Vector:

Elements of a vector can be accessed using indexing. The vector indexing can be logical, integer, or character. The [ ] brackets are used for indexing. Indexing starts with position 1, unlike most programming languages where indexing starts from 0.

Extract Using Integer as Index:

We can use integers as an index to access specific elements. We can also use negative integers to return all elements except that specific element.

x<- 101:110
x[1]   #access the first element
x[c(2,3,4,5)] #Extract 2nd, 3rd, 4th, and 5th elements
x[5:10]        #Extract all elements from 5th to 10th
x[c(-5,-10)] #Extract all elements except 5th and 10th
x[-c(5:10)] #Extract all elements except from 5th to 10th 

Output:   x[1] #Extract the first element   [1] 101   x[c(2,3,4,5)] #Extract 2nd, 3rd, 4th, and 5th elements   [1] 102 103 104 105   x[5:10] #Extract all elements from 5th to 10th   [1] 105 106 107 108 109 110   x[c(-5,-10)] #Extract all elements except 5th and 10th   [1] 101 102 103 104 106 107 108 109   x[-c(5:10)] #Extract all elements except from 5th to 10th   [1] 101 102 103 104 

Extract Using Logical Vector as Index:

If you use a logical vector for indexing, the position where the logical vector is TRUE will be returned.

x[x < 105]
x[x>=104]

Output:   x[x < 105] [1] 101 102 103 104 x[x>=104]   [1] 104 105 106 107 108 109 110 

Modify a Vector in R:

We can modify a vector and assign a new value to it. You can truncate a vector by using reassignments. Check the below example. 

x<- 10:12
x[1]<- 101 #Modify the first element
x
x[2]<-102 #Modify the 2nd element
x
x<- x[1:2] #Truncate the last element
x 

Output:   x   [1] 101 11 12   x[2]<-102 #Modify the 2nd element   x   [1] 101 102 12   x<- x[1:2] #Truncate the last element   x   [1] 101 102 

Arithmetic Operations on Vectors:

We can use arithmetic operations on two vectors of the same length. They can be added, subtracted, multiplied, or divided. Check the output of the below code.

# Create two vectors.
v1 <- c(1:10)
v2 <- c(101:110)

# Vector addition.
add.result <- v1+v2
print(add.result)
# Vector subtraction.
sub.result <- v2-v1
print(sub.result)
# Vector multiplication.
multi.result <- v1*v2
print(multi.result)
# Vector division.
divi.result <- v2/v1
print(divi.result)

Output:   print(add.result)   [1] 102 104 106 108 110 112 114 116 118 120   print(sub.result)   [1] 100 100 100 100 100 100 100 100 100 100   print(multi.result)   [1] 101 204 309 416 525 636 749 864 981 1100   print(divi.result)   [1] 101.00000 51.00000 34.33333 26.00000 21.00000 17.66667 15.28571 13.50000 12.11111 11.00000 

Find Minimum and Maximum in a Vector:

The minimum and the maximum of a vector can be found using the min() or the max() function. range() is also available which returns the minimum and maximum in a vector.

x<- 1001:1010
max(x) # Find the maximum
min(x) # Find the minimum
range(x) #Find the range

Output:   max(x) # Find the maximum   [1] 1010   min(x) # Find the minimum   [1] 1001   range(x) #Find the range   [1] 1001 1010 

R Lists

The list is a data structure having elements of mixed data types. A vector having all elements of the same type is called an atomic vector but a vector having elements of a different type is called list.
We can check the type with typeof() or class() function and find the length using length()function.

x <- list("stat",5.1, TRUE, 1 + 4i)
x
class(x)
typeof(x)
length(x)

Output:   x   [[1]]   [1] "stat"   [[2]]   [1] 5.1   [[3]]   [1] TRUE   [[4]]   [1] 1+4i   class(x)   [1] “list”   typeof(x)   [1] “list”   length(x)   [1] 4 

You can create an empty list of a prespecified length with the vector() function.

x <- vector("list", length = 10)
x

Output:   x   [[1]]   NULL   [[2]]   NULL   [[3]]   NULL   [[4]]   NULL   [[5]]   NULL   [[6]]   NULL   [[7]]   NULL   [[8]]   NULL   [[9]]   NULL   [[10]]   NULL 

How to extract elements from a list?

Lists can be subset using two syntaxes, the $ operator, and square brackets []. The $ operator returns a named element of a list. The [] syntax returns a list, while the [[]] returns an element of a list.

# subsetting
l$e
l["e"]
l[1:2]
l[c(1:2)] #index using integer vector
l[-c(3:length(l))] #negative index to exclude elements from 3rd up to last.
l[c(T,F,F,F,F)] # logical index to access elements

Output: > l$e [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10] [1,] 1 0 0 0 0 0 0 0 0 0 [2,] 0 1 0 0 0 0 0 0 0 0 [3,] 0 0 1 0 0 0 0 0 0 0 [4,] 0 0 0 1 0 0 0 0 0 0 [5,] 0 0 0 0 1 0 0 0 0 0 [6,] 0 0 0 0 0 1 0 0 0 0 [7,] 0 0 0 0 0 0 1 0 0 0 [8,] 0 0 0 0 0 0 0 1 0 0 [9,] 0 0 0 0 0 0 0 0 1 0 [10,] 0 0 0 0 0 0 0 0 0 1 > l["e"] $e [,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10] [1,] 1 0 0 0 0 0 0 0 0 0 [2,] 0 1 0 0 0 0 0 0 0 0 [3,] 0 0 1 0 0 0 0 0 0 0 [4,] 0 0 0 1 0 0 0 0 0 0 [5,] 0 0 0 0 1 0 0 0 0 0 [6,] 0 0 0 0 0 1 0 0 0 0 [7,] 0 0 0 0 0 0 1 0 0 0 [8,] 0 0 0 0 0 0 0 1 0 0 [9,] 0 0 0 0 0 0 0 0 1 0 [10,] 0 0 0 0 0 0 0 0 0 1 > l[1:2] [[1]] [1] 1 2 3 4 [[2]] [1] FALSE > l[c(1:2)] #index using integer vector [[1]] [1] 1 2 3 4 [[2]] [1] FALSE > l[-c(3:length(l))] #negative index to exclude elements from 3rd up to last. [[1]] [1] 1 2 3 4 [[2]] [1] FALSE l[c(T,F,F,F,F)] [[1]] [1] 1 2 3 4

Modifying a List in R:

We can change components of a list through reassignment.

l[["name"]] <- "Kalyan Nandi"
l

Output: [[1]] [1] 1 2 3 4 [[2]] [1] FALSE [[3]] [1] “Hello Statistics!” $d function (arg = 42) { print(“Hello World!”) } $name [1] “Kalyan Nandi”

R Matrices

In R Programming Matrix is a two-dimensional data structure. They contain elements of the same atomic types. A Matrix can be created using the matrix() function. R can also be used for matrix calculations. Matrices have rows and columns containing a single data type. In a matrix, the order of rows and columns is important. Dimension can be checked directly with the dim() function and all attributes of an object can be checked with the attributes() function. Check the below example.

Creating a matrix in R

m <- matrix(nrow = 2, ncol = 3)
dim(m)
attributes(m)
m <- matrix(1:20, nrow = 4, ncol = 5)
m

Output:   dim(m)   [1] 2 3   attributes(m)   $dim   [1] 2 3   m <- matrix(1:20, nrow = 4, ncol = 5)   m   [,1] [,2] [,3] [,4] [,5]   [1,] 1 5 9 13 17   [2,] 2 6 10 14 18   [3,] 3 7 11 15 19   [4,] 4 8 12 16 20 

Matrices can be created by column-binding or row-binding with the cbind() and rbind() functions.

x<-1:3
y<-10:12
z<-30:32
cbind(x,y,z)
rbind(x,y,z)

Output:   cbind(x,y,z)   x y z   [1,] 1 10 30   [2,] 2 11 31   [3,] 3 12 32   rbind(x,y,z)   [,1] [,2] [,3]   x 1 2 3   y 10 11 12   z 30 31 32 

By default, the matrix function reorders a vector into columns, but we can also tell R to use rows instead.

x <-1:9
matrix(x, nrow = 3, ncol = 3)
matrix(x, nrow = 3, ncol = 3, byrow = TRUE)

Output   cbind(x,y,z)   x y z   [1,] 1 10 30   [2,] 2 11 31   [3,] 3 12 32   rbind(x,y,z)   [,1] [,2] [,3]   x 1 2 3   y 10 11 12   z 30 31 32 

R Arrays

In R, Arrays are the data types that can store data in more than two dimensions. An array can be created using the array() function. It takes vectors as input and uses the values in the dim parameter to create an array. If you create an array of dimensions (2, 3, 4) then it creates 4 rectangular matrices each with 2 rows and 3 columns. Arrays can store only data type.

Give a Name to Columns and Rows:

We can give names to the rows, columns, and matrices in the array by setting the dimnames parameter.

v1 <- c(1,2,3)
v2 <- 100:110
col.names <- c("Col1","Col2","Col3","Col4","Col5","Col6","Col7")
row.names <- c("Row1","Row2")
matrix.names <- c("Matrix1","Matrix2")
arr4 <- array(c(v1,v2), dim=c(2,7,2), dimnames = list(row.names,col.names, matrix.names))
arr4

Output: , , Matrix1 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Row1 1 3 101 103 105 107 109 Row2 2 100 102 104 106 108 110 , , Matrix2 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Row1 1 3 101 103 105 107 109 Row2 2 100 102 104 106 108 110

Accessing/Extracting Array Elements:

# Print the 2nd row of the 1st matrix of the array.
print(arr4[2,,1])
# Print the element in the 2nd row and 4th column of the 2nd matrix.
print(arr4[2,4,2])
# Print the 2nd Matrix.
print(arr4[,,2])

Output: > print(arr4[2,,1]) Col1 Col2 Col3 Col4 Col5 Col6 Col7 2 100 102 104 106 108 110 > > # Print the element in the 2nd row and 4th column of the 2nd matrix. > print(arr4[2,4,2]) [1] 104 > > # Print the 2nd Matrix. > print(arr4[,,2]) Col1 Col2 Col3 Col4 Col5 Col6 Col7 Row1 1 3 101 103 105 107 109 Row2 2 100 102 104 106 108 110

R Factors

Factors are used to represent categorical data and can be unordered or ordered. An example might be “Male” and “Female” if we consider gender. Factor objects can be created with the factor() function.

x <- factor(c("male", "female", "male", "male", "female"))
x
table(x)

Output:   x   [1] male female male male female   Levels: female male   table(x)   x   female male     2      3 

By default, Levels are put in alphabetical order. If you print the above code you will get levels as female and male. But if you want to get your levels in a particular order then set levels parameter like this.

x <- factor(c("male", "female", "male", "male", "female"), levels=c("male", "female"))
x
table(x)

Output:   x   [1] male female male male female   Levels: male female   table(x)   x   male female    3      2 

R Dataframes

Data frames are used to store tabular data in R. They are an important type of object in R and are used in a variety of statistical modeling applications. Data frames are represented as a special type of list where every element of the list has to have the same length. Each element of the list can be thought of as a column and the length of each element of the list is the number of rows. Unlike matrices, data frames can store different classes of objects in each column. Matrices must have every element be the same class (e.g. all integers or all numeric).

Creating a Data Frame:

Data frames can be created explicitly with the data.frame() function.

employee <- c('Ram','Sham','Jadu')
salary <- c(21000, 23400, 26800)
startdate <- as.Date(c('2016-11-1','2015-3-25','2017-3-14'))
employ_data <- data.frame(employee, salary, startdate)
employ_data
View(employ_data)

Output: employ_data employee salary startdate 1 Ram 21000 2016-11-01 2 Sham 23400 2015-03-25 3 Jadu 26800 2017-03-14   View(employ_data) 

Get the Structure of the Data Frame:

If you look at the structure of the data frame now, you see that the variable employee is a character vector, as shown in the following output:

str(employ_data)

Output: > str(employ_data) 'data.frame': 3 obs. of 3 variables: $ employee : Factor w/ 3 levels "Jadu","Ram","Sham": 2 3 1 $ salary : num 21000 23400 26800 $ startdate: Date, format: "2016-11-01" "2015-03-25" "2017-03-14"

Note that the first column, employee, is of type factor, instead of a character vector. By default, data.frame() function converts character vector into factor. To suppress this behavior, we can pass the argument stringsAsFactors=FALSE.

employ_data <- data.frame(employee, salary, startdate, stringsAsFactors = FALSE)
str(employ_data)

Output: 'data.frame': 3 obs. of 3 variables: $ employee : chr "Ram" "Sham" "Jadu" $ salary : num 21000 23400 26800 $ startdate: Date, format: "2016-11-01" "2015-03-25" "2017-03-14"

R Packages

The primary location for obtaining R packages is CRAN.

You can obtain information about the available packages on CRAN with the available.packages() function.
a <- available.packages()

head(rownames(a), 30) # Show the names of the first 30 packages
Packages can be installed with the install.packages() function in R.  To install a single package, pass the name of the lecture to the install.packages() function as the first argument.
The following code installs the ggplot2 package from CRAN.
install.packages(“ggplot2”)
You can install multiple R packages at once with a single call to install.packages(). Place the names of the R packages in a character vector.
install.packages(c(“caret”, “ggplot2”, “dplyr”))
 

Loading packages
Installing a package does not make it immediately available to you in R; you must load the package. The library() function is used to load packages into R. The following code is used to load the ggplot2 package into R. Do not put the package name in quotes.
library(ggplot2)
If you have Installed your packages without root access using the command install.packages(“ggplot2″, lib=”/data/Rpackages/”). Then to load use the below command.
library(ggplot2, lib.loc=”/data/Rpackages/”)
After loading a package, the functions exported by that package will be attached to the top of the search() list (after the workspace).
library(ggplot2)

search()

R – CSV() files

In R, we can read data from files stored outside the R environment. We can also write data into files that will be stored and accessed by the operating system. R can read and write into various file formats like CSV, Excel, XML, etc.

Getting and Setting the Working Directory

We can check which directory the R workspace is pointing to using the getwd() function. You can also set a new working directory using setwd()function.

# Get and print current working directory.
print(getwd())

# Set current working directory.
setwd("/web/com")

# Get and print current working directory.
print(getwd())

Output: [1] "/web/com/1441086124_2016" [1] "/web/com"

Input as CSV File

The CSV file is a text file in which the values in the columns are separated by a comma. Let’s consider the following data present in the file named input.csv.

You can create this file using windows notepad by copying and pasting this data. Save the file as input.csv using the save As All files(*.*) option in notepad.

Reading a CSV File

Following is a simple example of read.csv() function to read a CSV file available in your current working directory −

data <- read.csv("input.csv")
print(data)

  id,   name,    salary,   start_date,     dept

R- Charts and Graphs

R- Pie Charts

Pie charts are created with the function pie(x, labels=) where x is a non-negative numeric vector indicating the area of each slice and labels= notes a character vector of names for the slices.

Syntax

The basic syntax for creating a pie-chart using the R is −

pie(x, labels, radius, main, col, clockwise)

Following is the description of the parameters used −

• x is a vector containing the numeric values used in the pie chart.
• labels are used to give a description of the slices.
• radius indicates the radius of the circle of the pie chart. (value between −1 and +1).
• main indicates the title of the chart.
• col indicates the color palette.
• clockwise is a logical value indicating if the slices are drawn clockwise or anti-clockwise.

Simple Pie chart

# Simple Pie Chart
slices <- c(10, 12,4, 16, 8)
lbls <- c("US", "UK", "Australia", "Germany", "France")
pie(slices, labels = lbls, main="Pie Chart of Countries")

 

3-D pie chart

The pie3D( ) function in the plotrix package provides 3D exploded pie charts.

# 3D Exploded Pie Chart
library(plotrix)
slices <- c(10, 12, 4, 16, 8)
lbls <- c("US", "UK", "Australia", "Germany", "France")
pie3D(slices,labels=lbls,explode=0.1,
   main="Pie Chart of Countries ")

R -Bar Charts

A bar chart represents data in rectangular bars with a length of the bar proportional to the value of the variable. R uses the function barplot() to create bar charts. R can draw both vertical and Horizontal bars in the bar chart. In the bar chart, each of the bars can be given different colors.

Let us suppose, we have a vector of maximum temperatures (in degree Celsius) for seven days as follows.

max.temp <- c(22, 27, 26, 24, 23, 26, 28)
barplot(max.temp)

Some of the frequently used ones are, “main” to give the title, “xlab” and “ylab” to provide labels for the axes, names.arg for naming each bar, “col” to define color, etc.

We can also plot bars horizontally by providing the argument horiz=TRUE.

# barchart with added parameters
barplot(max.temp,
main = "Maximum Temperatures in a Week",
xlab = "Degree Celsius",
ylab = "Day",
names.arg = c("Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"),
col = "darkred",
horiz = TRUE)

Simply doing barplot(age) will not give us the required plot. It will plot 10 bars with height equal to the student’s age. But we want to know the number of students in each age category.

This count can be quickly found using the table() function, as shown below.

> table(age)
age
16 17 18 19 
1  2  6  1

Now plotting this data will give our required bar plot. Note below, that we define the argument “density” to shade the bars.

barplot(table(age),
main="Age Count of 10 Students",
xlab="Age",
ylab="Count",
border="red",
col="blue",
density=10
)

 

A histogram represents the frequencies of values of a variable bucketed into ranges. Histogram is similar to bar chat but the difference is it groups the values into continuous ranges. Each bar in histogram represents the height of the number of values present in that range.

R creates histogram using hist() function. This function takes a vector as an input and uses some more parameters to plot histograms.

Syntax

The basic syntax for creating a histogram using R is −

hist(v,main,xlab,xlim,ylim,breaks,col,border)

Following is the description of the parameters used −

• v is a vector containing numeric values used in the histogram.
• main indicates the title of the chart.
• col is used to set the color of the bars.
• border is used to set the border color of each bar.
• xlab is used to give a description of the x-axis.
• xlim is used to specify the range of values on the x-axis.
• ylim is used to specify the range of values on the y-axis.
• breaks are used to mention the width of each bar.

Example

A simple histogram is created using input vector, label, col, and border parameters.

The script given below will create and save the histogram in the current R working directory.

# Create data for the graph.
v <-  c(9,13,21,8,36,22,12,41,31,33,19)

# Give the chart file a name.
png(file = "histogram.png")

# Create the histogram.
hist(v,xlab = "Weight",col = "yellow",border = "blue")

# Save the file.
dev.off()

 

Range of X and Y values

To specify the range of values allowed in X axis and Y axis, we can use the xlim and ylim parameters.

The width of each bar can be decided by using breaks.

# Create data for the graph.
v <- c(9,13,21,8,36,22,12,41,31,33,19)

# Give the chart file a name.
png(file = "histogram_lim_breaks.png")

# Create the histogram.
hist(v,xlab = "Weight",col = "green",border = "red", xlim = c(0,40), ylim = c(0,5),
   breaks = 5)

# Save the file.
dev.off()

R vs SAS – Which Tool is Better?

The debate around data analytics tools has been going on forever. Each time a new one comes out, comparisons transpire. Although many aspects of the tool remain subjective, beginners want to know which tool is better to start with.
The most popular and widely used tools for data analytics are R and SAS. Both of them have been around for a long time and are often pitted against each other. So, let’s compare them based on the most relevant factors.

1. Availability and Cost: SAS is widely used in most private organizations as it is a commercial software. It is more expensive than any other data analytics tool available. It might thus be a bit difficult buying the software if you are an individual professional or a student starting out. On the other hand, R is an open source software and is completely free to use. Anyone can begin using it right away without having to spend a penny. So, regarding availability and cost, R is hands down the better tool.
2. Ease of learning: Since SAS is a commercial software, it has a whole lot of online resources available. Also, those who already know SQL might find it easier to adapt to SAS as it comes with PROC SQL option. The tool has a user-friendly GUI. It comes with an extensive documentation and tutorial base which can help early learners get started seamlessly. Whereas, the learning curve for R is quite steep. You need to learn to code at the root level and carrying out simple tasks demand a lot of time and effort with R. However, several forums and online communities post religiously about its usage.
3. Data Handling Capabilities: When it comes to data handling, both SAS and R perform well, but there are some caveats for the latter. While SAS can even churn through terabytes of data with ease, R might be constrained as it makes use of the available RAM in the machine. This can be a hassle for 32-bit systems with low RAM capacity. Due to this, R can at times become unresponsive or give an ‘out of memory’ error. Both of them can run parallel computations, support integrations for Hadoop, Spark, Cloudera and Apache Pig among others. Also, the availability of devices with better RAM capacity might negate the disadvantages of R.
4. Graphical Capabilities: Graphical capabilities or data visualization is the strongest forte of R. This is where SAS lacks behind in a major way. R has access to packages like GGPlot, RGIS, Lattice, and GGVIS among others which provide superior graphical competency. In comparison, Base SAS is struggling hard to catch up with the advancements in graphics and visualization in data analytics. Even the graphics packages available in SAS are poorly documented which makes them difficult to use.
5. Advancements in Tool: Advancements in the industry give way to advancements in tools, and both SAS and R hold up pretty well in this regard. SAS, being a corporate software, rolls out new features and technologies frequently with new versions of its software. However, the updates are not as fast as R since it is open source software and has many contributors throughout the world. Alternatively, the latest updates in SAS are pushed out after thorough testing, making them much more stable, and reliable than R. Both the tools come with a fair share of pros & cons.
6. Job Scenario: Currently, large corporations insist on using SAS, but SMEs and start-ups are increasingly opting for R, given that it’s free. The current job trend seems to show that while SAS is losing its momentum, R is gaining potential. The job scenario is on the cusp of change, and both the tools seem strong, but since R is on an uphill path, it can probably witness more jobs in the future, albeit not in huge corporates.
7. Deep Learning Support: While SAS has just begun work on adding deep learning support, R has added support for a few packages which enable deep learning capabilities in the tool. You can use KerasR and keras package in R which are mere interfaces for the original Keras package built on Python. Although none of the tools are excellent facilitators of deep learning, R has seen some recent active developments on this front.
8. Customer Service Support and Community: As one would expect from full-fledged commercial software, SAS offers excellent customer service support as well as the backing of a helpful community. Since R is free open-source software, expecting customer support will be hard to justify. However, it has a vast online community that can help you with almost everything. On the other hand, no matter what problem you face with SAS, you can immediately reach out to their customer support and get it solved without any hassles.

Final Verdict
As per estimations by the Economic Times, the analytics industry will grow to $16 billion till 2025 in India. If you wish to venture into this domain, there can’t be a better time. Just start learning the tool you think is better based on the comparison points above.

---

Original article source at: https://www.mygreatlearning.com

#r #programming 

iOS App Development Company in India

iOS app development company in India

India is considered the IT hub of the world because of n number of IT infrastructure development services offering companies. In this whole market iOS app development is the leading service offered by agencies across India

Want to develop the iOS app in India

WebClues Infotech with its head office in India has created a huge presence across the world over time and has served clients in all of the major countries around the world. WebClues Infotech with a highly skilled development team of 120+ members can help you deliver a better result at a reasonable cost.

Want to know more about our iOS app development services in India?

Visit: https://www.webcluesinfotech.com/iphone-app-development/

Share your requirements https://www.webcluesinfotech.com/contact-us/

View Portfolio https://www.webcluesinfotech.com/portfolio/

#ios app development company in india #ios app development company #ios app development #ios app #ios #hire ios app developer

iOS App Development Agency in the USA

iOS App Development Agency in the USA

Whenever a start-up in the USA launch an MVP version of the app they prefer to launch it only for iPhone user because the US has a large market of iPhone users in comparison to Android. The recent phenomenon of Clubhouse is the biggest example.

Want to develop an iOS app in the USA?

With 2 office locations across the USA and 6 worldwide, WebClues Infotech has the experience of serving a huge client base of 600+. After such a satisfied client base, WebClues Infotech is prepared to serve you with and iOS App Development Services in the USA.

Want to know more about our iOS App Development Services in the USA?

Visit: https://www.webcluesinfotech.com/iphone-app-development/

Share your requirements https://www.webcluesinfotech.com/contact-us/

View Portfolio https://www.webcluesinfotech.com/portfolio/

#ios app development agency in the usa #ios app development agency #ios app development #ios app #ios #hire ios app developer