rahul singh

1643007456

How to Use an NDA for App Development Outsourcing?

When you hire an mobile app development agency in USA for your shared services demands, it's difficult to worry about the security of your application idea and other sensitive data. The security of a company's sensitive data linked to app development is always a top priority for every company.

Furthermore, while offering a novel idea for app development, keeping the entire stuff private from large competitors becomes a priority for the organisation. They choose to sign a Non-Disclosure Agreement (NDA) for mobile app development in this scenario.

A non-disclosure agreement is a common corporate term for avoiding the theft of a valued business idea or data.

When it comes to signing a non-disclosure agreement (NDA) for mobile app development, certain questions are raised for both the customer and the development agency to address some conditions.

There is a multitude of factors that contribute to doubts regarding the necessity for an NDA. We've covered some key aspects in this article that will help you understand why you need an NDA while contracting mobile app development.

Why Is It Necessary to Protect Your Mobile App Concept?
 

Ordinarily, any organisation will request that their employing android app development company in USA sign an NDA because they require to discuss the most sensitive data regarding their corporation or critical activities that could have an impact on their firm in the incident that it is misused or disclosed, either purposely or unknowingly, by others.

Additionally, if the app is linked to a critical company operation, such as research, finance, or manufacturing, they must take extra precautions to protect their sensitive data.

Also, every company that wishes to present a fresh concept for creating a great application with unrivalled features needs assurance that their app idea is completely private before promoting it.

As a result, they insist that a hired developer or an app development company agree on an NDA in this kind of circumstances.

The primary question is whether or not to sign the agreement before fully knowing the issue. If you wish to outsource your task but don't share the specifics of your assignment with the development firm, they won't be able to come to an agreement without understanding your requirement.

Furthermore, if you want to gain funders for your project, you'll need to present them with details regarding the app idea. As a result, when creating a new mobile app, multiple people are involved in the process.

As a result, the NDA can only be prepared after a preliminary conversation of the project with a development business and other interested parties. To incorporate key elements in the agreement, you need to seek legal guidance.

It's also crucial to engage all of your company's project-related workers, sponsored individuals, and development team to preserve the agreement's confidentiality.

What You Should Know Regarding the NDA: 

Signing An NDA will not help you achieve your goal.

If you believe that, you have accepted the agreement, and your goal of maintaining the protection of the app idea has been accomplished. However, things are dissimilar in practice. You should be aware of the contract: the android mobile app development company can maintain your data secret, but they can take the proposal if another business contacts them with an identical concept.

Typically, there are no laws prohibiting developers or development firms from accepting proposals with similar concepts from other firms.

As a result, how much faith you may place in your developer or development firm is entirely up to you as a consumer. In an effort to keep their decent image and long-term business relationships, moral mobile app development typically ensures its consumers that they will receive reliable services.

Make an NDA that covers both sides.

When signing a one-sided NDA, there is no guarantee that your data will be kept private. As a result, when drafting an NDA, be sure to include both sides: the customer (the person who wants to develop an application) and the developer (the person who wants to produce an app)  app development companies in USA.

It is also crucial to have the signatures of all project participants on both ends; else, there is a greater risk of data leaking.

When should you sign a non-disclosure agreement (NDA)?

When both parties have a common knowledge of the app development process, or when you're collaborating with a well-known corporation or brand, signing an NDA seems less of a problem. The only item to make sure of is that all terms are reasonable and do not contain any unfair restrictions.

A non-disclosure agreement has various advantages. It provides assurances about the safety of all intellectual material related to an application and its whole development process, and also the protection of your project information and copyrights for the application under development.

An NDA for mobile app development is a binding agreement that prevents you from disclosing your confidential data and allows you to file a lawsuit if you discover any data leaks. It protects you from rivals who could try to make money from your application concept before it is released.

Conclusion

You should be aware of the requirement for a non-disclosure agreement (NDA) for mobile app development, particularly if you are hiring an app developer or a mobile app development services offering agency.

Understanding the basics of the Non-Disclosure Agreement will help you protect your business's pertinent data. You can keep the mobile app development procedure straightforward without any discrepancies later on if you have a common agreement on both ends.

Assuring all terms at the outset improves work clarity and aids in a smooth app development process.

Source URL:-
ios app development companies in USA


 

What is GEEK

Buddha Community

Fredy  Larson

Fredy Larson

1595059664

How long does it take to develop/build an app?

With more of us using smartphones, the popularity of mobile applications has exploded. In the digital era, the number of people looking for products and services online is growing rapidly. Smartphone owners look for mobile applications that give them quick access to companies’ products and services. As a result, mobile apps provide customers with a lot of benefits in just one device.

Likewise, companies use mobile apps to increase customer loyalty and improve their services. Mobile Developers are in high demand as companies use apps not only to create brand awareness but also to gather information. For that reason, mobile apps are used as tools to collect valuable data from customers to help companies improve their offer.

There are many types of mobile applications, each with its own advantages. For example, native apps perform better, while web apps don’t need to be customized for the platform or operating system (OS). Likewise, hybrid apps provide users with comfortable user experience. However, you may be wondering how long it takes to develop an app.

To give you an idea of how long the app development process takes, here’s a short guide.

App Idea & Research

app-idea-research

_Average time spent: two to five weeks _

This is the initial stage and a crucial step in setting the project in the right direction. In this stage, you brainstorm ideas and select the best one. Apart from that, you’ll need to do some research to see if your idea is viable. Remember that coming up with an idea is easy; the hard part is to make it a reality.

All your ideas may seem viable, but you still have to run some tests to keep it as real as possible. For that reason, when Web Developers are building a web app, they analyze the available ideas to see which one is the best match for the targeted audience.

Targeting the right audience is crucial when you are developing an app. It saves time when shaping the app in the right direction as you have a clear set of objectives. Likewise, analyzing how the app affects the market is essential. During the research process, App Developers must gather information about potential competitors and threats. This helps the app owners develop strategies to tackle difficulties that come up after the launch.

The research process can take several weeks, but it determines how successful your app can be. For that reason, you must take your time to know all the weaknesses and strengths of the competitors, possible app strategies, and targeted audience.

The outcomes of this stage are app prototypes and the minimum feasible product.

#android app #frontend #ios app #minimum viable product (mvp) #mobile app development #web development #android app development #app development #app development for ios and android #app development process #ios and android app development #ios app development #stages in app development

Aria Barnes

Aria Barnes

1624883101

Top 7 Countries to Outsource Mobile App Development Projects

Outsourcing mobile app development projects is an efficient budget optimization strategy in 2021. Because of the low cost, as a critical strategy, businesses outsource overseas to remain competitive and strengthen their market position.

According to the latest software outsourcing stat, the global outsourcing market was valued at $92.5 million in 2019. Statistics show that revenue in the application outsourcing segment is projected to reach US$108,748.6m in 2021.

Be it custom web development or in-trend mobile app development solutions, all you need is an outsourcing company to get your work done. How wonderful is this?

However, there are a few things you need to know before you can do outsourcing effectively. For beginners, you must know which is the best country to outsource mobile apps development to focus your search effectively.

Here in this article, I have mentioned the top app development countries to help you make an informed decision based on your preferences.

Here we go…

 

Original source: Outsource Mobile App Development

 

 

#mobile app development outsourcing #outsource mobile app development #outsource app development india #software development outsource #outsource web application development #outsource mobile app development india

Outsourcing Mobile App Development Services: What Startups need to know - TopDevelopers.co

Here, we talk about how outsourcing mobile app development services by startups have a lot of benefits for the business and some useful tips on doing it right.

#mobile app development outsourcing #outsourcing for startups #outsourcing mobile app development #outsourcing app development services #outsourcing partner #outsourcing mobile app development company

Digital Wallet App Development | Mobile Payment App Development | e-Wallet App Development

Are you looking for the most trusted and custom mobile wallet development company in USA? We at AppClues Infotech offering reliable & productive mobile wallet app development services with advanced technologies and functionalities. Hire dedicated mobile wallet designer & developers from us at the best price for your business requirements.

Our Mobile Wallet App Development Services
• Custom Mobile Wallet App Solution
• Cryptocurrency Wallet App Development
• Digital Wallet App Development
• Mobile Payment App Development
• Mobile Wallet UI/UX Designing

For more info:
Website: https://www.appcluesinfotech.com/
Email: info@appcluesinfotech.com
Call: +1-978-309-9910

#digital wallet app development #mobile payment app development #e-wallet app development #digital e-wallet app development company #digital wallet app development services #ewallet app development

Chloe  Butler

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

  1. Design the PCB using your favorite CAD or drawing software.
  2. Print the top and bottom copper and top silk screen layers to a PDF file.
  3. Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
  4. Use a Gerber viewer to double-check the output against the original PCB design.
  5. Make adjustments as needed.
  6. Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.


pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl