jackson ella

jackson ella

1619072780

How to fix the Cash App transfer failed issue: Tips to Fix Cash App 2 Minutes

Solving the payment issues in Cash App is relatively easy. The users can quickly fix the problem within minutes following these simple steps –

Discover the Cash App payment failure node: Most users get frustrated and assume the Cash App as non-functional. However, before the final verdict, the users must check their Cash App funds. Check the balance of the Cash App account. If it’s not highlighting a dollar sign, inspect the linked bank account to find whether the cash app transaction is pending or successful. Every user must check these details before cancelling or updating his transactions.

Cancel the payment: If you find the money transaction is visible in the Cash App linked bank account but not updated by the Cash App, you must quickly cancel the payment to prevent the fund from being frozen. You can cancel the payment to claim a refund as the recipient has not received the money. Cash App presents an easy cancellation service. Therefore, you can cancel the payment within 24 hours of the transaction to prevent the money’s deduction from your account. And as after this time, the cancellation option is disabled.

Claim for the unauthorized charges made: As the Cash App account is linked to your bank account, in some cases, the Cash App may deduct a charge from the bank account. In case of any unauthorized fund deduction, you can contact the card-issuing bank for an instant refund of the amount. However, if the Cash App refund failed, you can connect to the Cash App customer support.

How to Cancel the Cash App Money Transaction?

Here are the steps to cancel the payment in Cash App:

1.Open the Cash App on your mobile device.
2.From the homepage of Cash App, hit the Clock icon highlighted on the top right corner of the display.
3.Visit the recipient’s Cash App account and look for the “Cash App Cancel Payment” option. If the payment is completed, you will not find the cancellation option.

**Reach Out to Tech Experts for Quick Assistance **

If you face any challenges while trying out the troubleshooting mentioned above methods or if the methods are ineffective, you can reach out to the tech experts. The Cash App tech support team is available 24X7 for cash app customer support. You can connect to them by the toll-free number. The experts deeply analyze your issues and blend out practical solutions.

The tech team prevents you from hiring a tech person to fix the transfer failed Cash App problem. With years of experience and efficient skills, they safeguard your money and help you perform secure payments. You can dial the toll-free number of Cash App and get in touch with the experts for further assistance.

In today’s market scenario, Cash App has occupied a broad spectrum along with PayPal and Venmo. As of 2021, Cash App stands with a customer base of around 24 million. With excellent cash app customer support and highly optimized facilities, it has successfully established itself as one of the most premium payment portals.

The application prevents quick service to the users in case their money gets frozen during the transaction. In the case of Cash, App payment failed, the users can easily use the ways mentioned above to fix the issues without paying any unauthorized charges of transaction.

#cash app payment failed, #cash app customer support #cash app refund failed, #cash app cancel payment

What is GEEK

Buddha Community

How to fix the Cash App transfer failed issue: Tips to Fix Cash App 2 Minutes
Veronica  Roob

Veronica Roob

1653475560

A Pure PHP Implementation Of The MessagePack Serialization Format

msgpack.php

A pure PHP implementation of the MessagePack serialization format.

Features

Installation

The recommended way to install the library is through Composer:

composer require rybakit/msgpack

Usage

Packing

To pack values you can either use an instance of a Packer:

$packer = new Packer();
$packed = $packer->pack($value);

or call a static method on the MessagePack class:

$packed = MessagePack::pack($value);

In the examples above, the method pack automatically packs a value depending on its type. However, not all PHP types can be uniquely translated to MessagePack types. For example, the MessagePack format defines map and array types, which are represented by a single array type in PHP. By default, the packer will pack a PHP array as a MessagePack array if it has sequential numeric keys, starting from 0 and as a MessagePack map otherwise:

$mpArr1 = $packer->pack([1, 2]);               // MP array [1, 2]
$mpArr2 = $packer->pack([0 => 1, 1 => 2]);     // MP array [1, 2]
$mpMap1 = $packer->pack([0 => 1, 2 => 3]);     // MP map {0: 1, 2: 3}
$mpMap2 = $packer->pack([1 => 2, 2 => 3]);     // MP map {1: 2, 2: 3}
$mpMap3 = $packer->pack(['a' => 1, 'b' => 2]); // MP map {a: 1, b: 2}

However, sometimes you need to pack a sequential array as a MessagePack map. To do this, use the packMap method:

$mpMap = $packer->packMap([1, 2]); // {0: 1, 1: 2}

Here is a list of type-specific packing methods:

$packer->packNil();           // MP nil
$packer->packBool(true);      // MP bool
$packer->packInt(42);         // MP int
$packer->packFloat(M_PI);     // MP float (32 or 64)
$packer->packFloat32(M_PI);   // MP float 32
$packer->packFloat64(M_PI);   // MP float 64
$packer->packStr('foo');      // MP str
$packer->packBin("\x80");     // MP bin
$packer->packArray([1, 2]);   // MP array
$packer->packMap(['a' => 1]); // MP map
$packer->packExt(1, "\xaa");  // MP ext

Check the "Custom types" section below on how to pack custom types.

Packing options

The Packer object supports a number of bitmask-based options for fine-tuning the packing process (defaults are in bold):

NameDescription
FORCE_STRForces PHP strings to be packed as MessagePack UTF-8 strings
FORCE_BINForces PHP strings to be packed as MessagePack binary data
DETECT_STR_BINDetects MessagePack str/bin type automatically
  
FORCE_ARRForces PHP arrays to be packed as MessagePack arrays
FORCE_MAPForces PHP arrays to be packed as MessagePack maps
DETECT_ARR_MAPDetects MessagePack array/map type automatically
  
FORCE_FLOAT32Forces PHP floats to be packed as 32-bits MessagePack floats
FORCE_FLOAT64Forces PHP floats to be packed as 64-bits MessagePack floats

The type detection mode (DETECT_STR_BIN/DETECT_ARR_MAP) adds some overhead which can be noticed when you pack large (16- and 32-bit) arrays or strings. However, if you know the value type in advance (for example, you only work with UTF-8 strings or/and associative arrays), you can eliminate this overhead by forcing the packer to use the appropriate type, which will save it from running the auto-detection routine. Another option is to explicitly specify the value type. The library provides 2 auxiliary classes for this, Map and Bin. Check the "Custom types" section below for details.

Examples:

// detect str/bin type and pack PHP 64-bit floats (doubles) to MP 32-bit floats
$packer = new Packer(PackOptions::DETECT_STR_BIN | PackOptions::FORCE_FLOAT32);

// these will throw MessagePack\Exception\InvalidOptionException
$packer = new Packer(PackOptions::FORCE_STR | PackOptions::FORCE_BIN);
$packer = new Packer(PackOptions::FORCE_FLOAT32 | PackOptions::FORCE_FLOAT64);

Unpacking

To unpack data you can either use an instance of a BufferUnpacker:

$unpacker = new BufferUnpacker();

$unpacker->reset($packed);
$value = $unpacker->unpack();

or call a static method on the MessagePack class:

$value = MessagePack::unpack($packed);

If the packed data is received in chunks (e.g. when reading from a stream), use the tryUnpack method, which attempts to unpack data and returns an array of unpacked messages (if any) instead of throwing an InsufficientDataException:

while ($chunk = ...) {
    $unpacker->append($chunk);
    if ($messages = $unpacker->tryUnpack()) {
        return $messages;
    }
}

If you want to unpack from a specific position in a buffer, use seek:

$unpacker->seek(42); // set position equal to 42 bytes
$unpacker->seek(-8); // set position to 8 bytes before the end of the buffer

To skip bytes from the current position, use skip:

$unpacker->skip(10); // set position to 10 bytes ahead of the current position

To get the number of remaining (unread) bytes in the buffer:

$unreadBytesCount = $unpacker->getRemainingCount();

To check whether the buffer has unread data:

$hasUnreadBytes = $unpacker->hasRemaining();

If needed, you can remove already read data from the buffer by calling:

$releasedBytesCount = $unpacker->release();

With the read method you can read raw (packed) data:

$packedData = $unpacker->read(2); // read 2 bytes

Besides the above methods BufferUnpacker provides type-specific unpacking methods, namely:

$unpacker->unpackNil();   // PHP null
$unpacker->unpackBool();  // PHP bool
$unpacker->unpackInt();   // PHP int
$unpacker->unpackFloat(); // PHP float
$unpacker->unpackStr();   // PHP UTF-8 string
$unpacker->unpackBin();   // PHP binary string
$unpacker->unpackArray(); // PHP sequential array
$unpacker->unpackMap();   // PHP associative array
$unpacker->unpackExt();   // PHP MessagePack\Type\Ext object

Unpacking options

The BufferUnpacker object supports a number of bitmask-based options for fine-tuning the unpacking process (defaults are in bold):

NameDescription
BIGINT_AS_STRConverts overflowed integers to strings [1]
BIGINT_AS_GMPConverts overflowed integers to GMP objects [2]
BIGINT_AS_DECConverts overflowed integers to Decimal\Decimal objects [3]

1. The binary MessagePack format has unsigned 64-bit as its largest integer data type, but PHP does not support such integers, which means that an overflow can occur during unpacking.

2. Make sure the GMP extension is enabled.

3. Make sure the Decimal extension is enabled.

Examples:

$packedUint64 = "\xcf"."\xff\xff\xff\xff"."\xff\xff\xff\xff";

$unpacker = new BufferUnpacker($packedUint64);
var_dump($unpacker->unpack()); // string(20) "18446744073709551615"

$unpacker = new BufferUnpacker($packedUint64, UnpackOptions::BIGINT_AS_GMP);
var_dump($unpacker->unpack()); // object(GMP) {...}

$unpacker = new BufferUnpacker($packedUint64, UnpackOptions::BIGINT_AS_DEC);
var_dump($unpacker->unpack()); // object(Decimal\Decimal) {...}

Custom types

In addition to the basic types, the library provides functionality to serialize and deserialize arbitrary types. This can be done in several ways, depending on your use case. Let's take a look at them.

Type objects

If you need to serialize an instance of one of your classes into one of the basic MessagePack types, the best way to do this is to implement the CanBePacked interface in the class. A good example of such a class is the Map type class that comes with the library. This type is useful when you want to explicitly specify that a given PHP array should be packed as a MessagePack map without triggering an automatic type detection routine:

$packer = new Packer();

$packedMap = $packer->pack(new Map([1, 2, 3]));
$packedArray = $packer->pack([1, 2, 3]);

More type examples can be found in the src/Type directory.

Type transformers

As with type objects, type transformers are only responsible for serializing values. They should be used when you need to serialize a value that does not implement the CanBePacked interface. Examples of such values could be instances of built-in or third-party classes that you don't own, or non-objects such as resources.

A transformer class must implement the CanPack interface. To use a transformer, it must first be registered in the packer. Here is an example of how to serialize PHP streams into the MessagePack bin format type using one of the supplied transformers, StreamTransformer:

$packer = new Packer(null, [new StreamTransformer()]);

$packedBin = $packer->pack(fopen('/path/to/file', 'r+'));

More type transformer examples can be found in the src/TypeTransformer directory.

Extensions

In contrast to the cases described above, extensions are intended to handle extension types and are responsible for both serialization and deserialization of values (types).

An extension class must implement the Extension interface. To use an extension, it must first be registered in the packer and the unpacker.

The MessagePack specification divides extension types into two groups: predefined and application-specific. Currently, there is only one predefined type in the specification, Timestamp.

Timestamp

The Timestamp extension type is a predefined type. Support for this type in the library is done through the TimestampExtension class. This class is responsible for handling Timestamp objects, which represent the number of seconds and optional adjustment in nanoseconds:

$timestampExtension = new TimestampExtension();

$packer = new Packer();
$packer = $packer->extendWith($timestampExtension);

$unpacker = new BufferUnpacker();
$unpacker = $unpacker->extendWith($timestampExtension);

$packedTimestamp = $packer->pack(Timestamp::now());
$timestamp = $unpacker->reset($packedTimestamp)->unpack();

$seconds = $timestamp->getSeconds();
$nanoseconds = $timestamp->getNanoseconds();

When using the MessagePack class, the Timestamp extension is already registered:

$packedTimestamp = MessagePack::pack(Timestamp::now());
$timestamp = MessagePack::unpack($packedTimestamp);

Application-specific extensions

In addition, the format can be extended with your own types. For example, to make the built-in PHP DateTime objects first-class citizens in your code, you can create a corresponding extension, as shown in the example. Please note, that custom extensions have to be registered with a unique extension ID (an integer from 0 to 127).

More extension examples can be found in the examples/MessagePack directory.

To learn more about how extension types can be useful, check out this article.

Exceptions

If an error occurs during packing/unpacking, a PackingFailedException or an UnpackingFailedException will be thrown, respectively. In addition, an InsufficientDataException can be thrown during unpacking.

An InvalidOptionException will be thrown in case an invalid option (or a combination of mutually exclusive options) is used.

Tests

Run tests as follows:

vendor/bin/phpunit

Also, if you already have Docker installed, you can run the tests in a docker container. First, create a container:

./dockerfile.sh | docker build -t msgpack -

The command above will create a container named msgpack with PHP 8.1 runtime. You may change the default runtime by defining the PHP_IMAGE environment variable:

PHP_IMAGE='php:8.0-cli' ./dockerfile.sh | docker build -t msgpack -

See a list of various images here.

Then run the unit tests:

docker run --rm -v $PWD:/msgpack -w /msgpack msgpack

Fuzzing

To ensure that the unpacking works correctly with malformed/semi-malformed data, you can use a testing technique called Fuzzing. The library ships with a help file (target) for PHP-Fuzzer and can be used as follows:

php-fuzzer fuzz tests/fuzz_buffer_unpacker.php

Performance

To check performance, run:

php -n -dzend_extension=opcache.so \
-dpcre.jit=1 -dopcache.enable=1 -dopcache.enable_cli=1 \
tests/bench.php

Example output

Filter: MessagePack\Tests\Perf\Filter\ListFilter
Rounds: 3
Iterations: 100000

=============================================
Test/Target            Packer  BufferUnpacker
---------------------------------------------
nil .................. 0.0030 ........ 0.0139
false ................ 0.0037 ........ 0.0144
true ................. 0.0040 ........ 0.0137
7-bit uint #1 ........ 0.0052 ........ 0.0120
7-bit uint #2 ........ 0.0059 ........ 0.0114
7-bit uint #3 ........ 0.0061 ........ 0.0119
5-bit sint #1 ........ 0.0067 ........ 0.0126
5-bit sint #2 ........ 0.0064 ........ 0.0132
5-bit sint #3 ........ 0.0066 ........ 0.0135
8-bit uint #1 ........ 0.0078 ........ 0.0200
8-bit uint #2 ........ 0.0077 ........ 0.0212
8-bit uint #3 ........ 0.0086 ........ 0.0203
16-bit uint #1 ....... 0.0111 ........ 0.0271
16-bit uint #2 ....... 0.0115 ........ 0.0260
16-bit uint #3 ....... 0.0103 ........ 0.0273
32-bit uint #1 ....... 0.0116 ........ 0.0326
32-bit uint #2 ....... 0.0118 ........ 0.0332
32-bit uint #3 ....... 0.0127 ........ 0.0325
64-bit uint #1 ....... 0.0140 ........ 0.0277
64-bit uint #2 ....... 0.0134 ........ 0.0294
64-bit uint #3 ....... 0.0134 ........ 0.0281
8-bit int #1 ......... 0.0086 ........ 0.0241
8-bit int #2 ......... 0.0089 ........ 0.0225
8-bit int #3 ......... 0.0085 ........ 0.0229
16-bit int #1 ........ 0.0118 ........ 0.0280
16-bit int #2 ........ 0.0121 ........ 0.0270
16-bit int #3 ........ 0.0109 ........ 0.0274
32-bit int #1 ........ 0.0128 ........ 0.0346
32-bit int #2 ........ 0.0118 ........ 0.0339
32-bit int #3 ........ 0.0135 ........ 0.0368
64-bit int #1 ........ 0.0138 ........ 0.0276
64-bit int #2 ........ 0.0132 ........ 0.0286
64-bit int #3 ........ 0.0137 ........ 0.0274
64-bit int #4 ........ 0.0180 ........ 0.0285
64-bit float #1 ...... 0.0134 ........ 0.0284
64-bit float #2 ...... 0.0125 ........ 0.0275
64-bit float #3 ...... 0.0126 ........ 0.0283
fix string #1 ........ 0.0035 ........ 0.0133
fix string #2 ........ 0.0094 ........ 0.0216
fix string #3 ........ 0.0094 ........ 0.0222
fix string #4 ........ 0.0091 ........ 0.0241
8-bit string #1 ...... 0.0122 ........ 0.0301
8-bit string #2 ...... 0.0118 ........ 0.0304
8-bit string #3 ...... 0.0119 ........ 0.0315
16-bit string #1 ..... 0.0150 ........ 0.0388
16-bit string #2 ..... 0.1545 ........ 0.1665
32-bit string ........ 0.1570 ........ 0.1756
wide char string #1 .. 0.0091 ........ 0.0236
wide char string #2 .. 0.0122 ........ 0.0313
8-bit binary #1 ...... 0.0100 ........ 0.0302
8-bit binary #2 ...... 0.0123 ........ 0.0324
8-bit binary #3 ...... 0.0126 ........ 0.0327
16-bit binary ........ 0.0168 ........ 0.0372
32-bit binary ........ 0.1588 ........ 0.1754
fix array #1 ......... 0.0042 ........ 0.0131
fix array #2 ......... 0.0294 ........ 0.0367
fix array #3 ......... 0.0412 ........ 0.0472
16-bit array #1 ...... 0.1378 ........ 0.1596
16-bit array #2 ........... S ............. S
32-bit array .............. S ............. S
complex array ........ 0.1865 ........ 0.2283
fix map #1 ........... 0.0725 ........ 0.1048
fix map #2 ........... 0.0319 ........ 0.0405
fix map #3 ........... 0.0356 ........ 0.0665
fix map #4 ........... 0.0465 ........ 0.0497
16-bit map #1 ........ 0.2540 ........ 0.3028
16-bit map #2 ............. S ............. S
32-bit map ................ S ............. S
complex map .......... 0.2372 ........ 0.2710
fixext 1 ............. 0.0283 ........ 0.0358
fixext 2 ............. 0.0291 ........ 0.0371
fixext 4 ............. 0.0302 ........ 0.0355
fixext 8 ............. 0.0288 ........ 0.0384
fixext 16 ............ 0.0293 ........ 0.0359
8-bit ext ............ 0.0302 ........ 0.0439
16-bit ext ........... 0.0334 ........ 0.0499
32-bit ext ........... 0.1845 ........ 0.1888
32-bit timestamp #1 .. 0.0337 ........ 0.0547
32-bit timestamp #2 .. 0.0335 ........ 0.0560
64-bit timestamp #1 .. 0.0371 ........ 0.0575
64-bit timestamp #2 .. 0.0374 ........ 0.0542
64-bit timestamp #3 .. 0.0356 ........ 0.0533
96-bit timestamp #1 .. 0.0362 ........ 0.0699
96-bit timestamp #2 .. 0.0381 ........ 0.0701
96-bit timestamp #3 .. 0.0367 ........ 0.0687
=============================================
Total                  2.7618          4.0820
Skipped                     4               4
Failed                      0               0
Ignored                     0               0

With JIT:

php -n -dzend_extension=opcache.so \
-dpcre.jit=1 -dopcache.jit_buffer_size=64M -dopcache.jit=tracing -dopcache.enable=1 -dopcache.enable_cli=1 \
tests/bench.php

Example output

Filter: MessagePack\Tests\Perf\Filter\ListFilter
Rounds: 3
Iterations: 100000

=============================================
Test/Target            Packer  BufferUnpacker
---------------------------------------------
nil .................. 0.0005 ........ 0.0054
false ................ 0.0004 ........ 0.0059
true ................. 0.0004 ........ 0.0059
7-bit uint #1 ........ 0.0010 ........ 0.0047
7-bit uint #2 ........ 0.0010 ........ 0.0046
7-bit uint #3 ........ 0.0010 ........ 0.0046
5-bit sint #1 ........ 0.0025 ........ 0.0046
5-bit sint #2 ........ 0.0023 ........ 0.0046
5-bit sint #3 ........ 0.0024 ........ 0.0045
8-bit uint #1 ........ 0.0043 ........ 0.0081
8-bit uint #2 ........ 0.0043 ........ 0.0079
8-bit uint #3 ........ 0.0041 ........ 0.0080
16-bit uint #1 ....... 0.0064 ........ 0.0095
16-bit uint #2 ....... 0.0064 ........ 0.0091
16-bit uint #3 ....... 0.0064 ........ 0.0094
32-bit uint #1 ....... 0.0085 ........ 0.0114
32-bit uint #2 ....... 0.0077 ........ 0.0122
32-bit uint #3 ....... 0.0077 ........ 0.0120
64-bit uint #1 ....... 0.0085 ........ 0.0159
64-bit uint #2 ....... 0.0086 ........ 0.0157
64-bit uint #3 ....... 0.0086 ........ 0.0158
8-bit int #1 ......... 0.0042 ........ 0.0080
8-bit int #2 ......... 0.0042 ........ 0.0080
8-bit int #3 ......... 0.0042 ........ 0.0081
16-bit int #1 ........ 0.0065 ........ 0.0095
16-bit int #2 ........ 0.0065 ........ 0.0090
16-bit int #3 ........ 0.0056 ........ 0.0085
32-bit int #1 ........ 0.0067 ........ 0.0107
32-bit int #2 ........ 0.0066 ........ 0.0106
32-bit int #3 ........ 0.0063 ........ 0.0104
64-bit int #1 ........ 0.0072 ........ 0.0162
64-bit int #2 ........ 0.0073 ........ 0.0174
64-bit int #3 ........ 0.0072 ........ 0.0164
64-bit int #4 ........ 0.0077 ........ 0.0161
64-bit float #1 ...... 0.0053 ........ 0.0135
64-bit float #2 ...... 0.0053 ........ 0.0135
64-bit float #3 ...... 0.0052 ........ 0.0135
fix string #1 ....... -0.0002 ........ 0.0044
fix string #2 ........ 0.0035 ........ 0.0067
fix string #3 ........ 0.0035 ........ 0.0077
fix string #4 ........ 0.0033 ........ 0.0078
8-bit string #1 ...... 0.0059 ........ 0.0110
8-bit string #2 ...... 0.0063 ........ 0.0121
8-bit string #3 ...... 0.0064 ........ 0.0124
16-bit string #1 ..... 0.0099 ........ 0.0146
16-bit string #2 ..... 0.1522 ........ 0.1474
32-bit string ........ 0.1511 ........ 0.1483
wide char string #1 .. 0.0039 ........ 0.0084
wide char string #2 .. 0.0073 ........ 0.0123
8-bit binary #1 ...... 0.0040 ........ 0.0112
8-bit binary #2 ...... 0.0075 ........ 0.0123
8-bit binary #3 ...... 0.0077 ........ 0.0129
16-bit binary ........ 0.0096 ........ 0.0145
32-bit binary ........ 0.1535 ........ 0.1479
fix array #1 ......... 0.0008 ........ 0.0061
fix array #2 ......... 0.0121 ........ 0.0165
fix array #3 ......... 0.0193 ........ 0.0222
16-bit array #1 ...... 0.0607 ........ 0.0479
16-bit array #2 ........... S ............. S
32-bit array .............. S ............. S
complex array ........ 0.0749 ........ 0.0824
fix map #1 ........... 0.0329 ........ 0.0431
fix map #2 ........... 0.0161 ........ 0.0189
fix map #3 ........... 0.0205 ........ 0.0262
fix map #4 ........... 0.0252 ........ 0.0205
16-bit map #1 ........ 0.1016 ........ 0.0927
16-bit map #2 ............. S ............. S
32-bit map ................ S ............. S
complex map .......... 0.1096 ........ 0.1030
fixext 1 ............. 0.0157 ........ 0.0161
fixext 2 ............. 0.0175 ........ 0.0183
fixext 4 ............. 0.0156 ........ 0.0185
fixext 8 ............. 0.0163 ........ 0.0184
fixext 16 ............ 0.0164 ........ 0.0182
8-bit ext ............ 0.0158 ........ 0.0207
16-bit ext ........... 0.0203 ........ 0.0219
32-bit ext ........... 0.1614 ........ 0.1539
32-bit timestamp #1 .. 0.0195 ........ 0.0249
32-bit timestamp #2 .. 0.0188 ........ 0.0260
64-bit timestamp #1 .. 0.0207 ........ 0.0281
64-bit timestamp #2 .. 0.0212 ........ 0.0291
64-bit timestamp #3 .. 0.0207 ........ 0.0295
96-bit timestamp #1 .. 0.0222 ........ 0.0358
96-bit timestamp #2 .. 0.0228 ........ 0.0353
96-bit timestamp #3 .. 0.0210 ........ 0.0319
=============================================
Total                  1.6432          1.9674
Skipped                     4               4
Failed                      0               0
Ignored                     0               0

You may change default benchmark settings by defining the following environment variables:

NameDefault
MP_BENCH_TARGETSpure_p,pure_u, see a list of available targets
MP_BENCH_ITERATIONS100_000
MP_BENCH_DURATIONnot set
MP_BENCH_ROUNDS3
MP_BENCH_TESTS-@slow, see a list of available tests

For example:

export MP_BENCH_TARGETS=pure_p
export MP_BENCH_ITERATIONS=1000000
export MP_BENCH_ROUNDS=5
# a comma separated list of test names
export MP_BENCH_TESTS='complex array, complex map'
# or a group name
# export MP_BENCH_TESTS='-@slow' // @pecl_comp
# or a regexp
# export MP_BENCH_TESTS='/complex (array|map)/'

Another example, benchmarking both the library and the PECL extension:

MP_BENCH_TARGETS=pure_p,pure_u,pecl_p,pecl_u \
php -n -dextension=msgpack.so -dzend_extension=opcache.so \
-dpcre.jit=1 -dopcache.enable=1 -dopcache.enable_cli=1 \
tests/bench.php

Example output

Filter: MessagePack\Tests\Perf\Filter\ListFilter
Rounds: 3
Iterations: 100000

===========================================================================
Test/Target            Packer  BufferUnpacker  msgpack_pack  msgpack_unpack
---------------------------------------------------------------------------
nil .................. 0.0031 ........ 0.0141 ...... 0.0055 ........ 0.0064
false ................ 0.0039 ........ 0.0154 ...... 0.0056 ........ 0.0053
true ................. 0.0038 ........ 0.0139 ...... 0.0056 ........ 0.0044
7-bit uint #1 ........ 0.0061 ........ 0.0110 ...... 0.0059 ........ 0.0046
7-bit uint #2 ........ 0.0065 ........ 0.0119 ...... 0.0042 ........ 0.0029
7-bit uint #3 ........ 0.0054 ........ 0.0117 ...... 0.0045 ........ 0.0025
5-bit sint #1 ........ 0.0047 ........ 0.0103 ...... 0.0038 ........ 0.0022
5-bit sint #2 ........ 0.0048 ........ 0.0117 ...... 0.0038 ........ 0.0022
5-bit sint #3 ........ 0.0046 ........ 0.0102 ...... 0.0038 ........ 0.0023
8-bit uint #1 ........ 0.0063 ........ 0.0174 ...... 0.0039 ........ 0.0031
8-bit uint #2 ........ 0.0063 ........ 0.0167 ...... 0.0040 ........ 0.0029
8-bit uint #3 ........ 0.0063 ........ 0.0168 ...... 0.0039 ........ 0.0030
16-bit uint #1 ....... 0.0092 ........ 0.0222 ...... 0.0049 ........ 0.0030
16-bit uint #2 ....... 0.0096 ........ 0.0227 ...... 0.0042 ........ 0.0046
16-bit uint #3 ....... 0.0123 ........ 0.0274 ...... 0.0059 ........ 0.0051
32-bit uint #1 ....... 0.0136 ........ 0.0331 ...... 0.0060 ........ 0.0048
32-bit uint #2 ....... 0.0130 ........ 0.0336 ...... 0.0070 ........ 0.0048
32-bit uint #3 ....... 0.0127 ........ 0.0329 ...... 0.0051 ........ 0.0048
64-bit uint #1 ....... 0.0126 ........ 0.0268 ...... 0.0055 ........ 0.0049
64-bit uint #2 ....... 0.0135 ........ 0.0281 ...... 0.0052 ........ 0.0046
64-bit uint #3 ....... 0.0131 ........ 0.0274 ...... 0.0069 ........ 0.0044
8-bit int #1 ......... 0.0077 ........ 0.0236 ...... 0.0058 ........ 0.0044
8-bit int #2 ......... 0.0087 ........ 0.0244 ...... 0.0058 ........ 0.0048
8-bit int #3 ......... 0.0084 ........ 0.0241 ...... 0.0055 ........ 0.0049
16-bit int #1 ........ 0.0112 ........ 0.0271 ...... 0.0048 ........ 0.0045
16-bit int #2 ........ 0.0124 ........ 0.0292 ...... 0.0057 ........ 0.0049
16-bit int #3 ........ 0.0118 ........ 0.0270 ...... 0.0058 ........ 0.0050
32-bit int #1 ........ 0.0137 ........ 0.0366 ...... 0.0058 ........ 0.0051
32-bit int #2 ........ 0.0133 ........ 0.0366 ...... 0.0056 ........ 0.0049
32-bit int #3 ........ 0.0129 ........ 0.0350 ...... 0.0052 ........ 0.0048
64-bit int #1 ........ 0.0145 ........ 0.0254 ...... 0.0034 ........ 0.0025
64-bit int #2 ........ 0.0097 ........ 0.0214 ...... 0.0034 ........ 0.0025
64-bit int #3 ........ 0.0096 ........ 0.0287 ...... 0.0059 ........ 0.0050
64-bit int #4 ........ 0.0143 ........ 0.0277 ...... 0.0059 ........ 0.0046
64-bit float #1 ...... 0.0134 ........ 0.0281 ...... 0.0057 ........ 0.0052
64-bit float #2 ...... 0.0141 ........ 0.0281 ...... 0.0057 ........ 0.0050
64-bit float #3 ...... 0.0144 ........ 0.0282 ...... 0.0057 ........ 0.0050
fix string #1 ........ 0.0036 ........ 0.0143 ...... 0.0066 ........ 0.0053
fix string #2 ........ 0.0107 ........ 0.0222 ...... 0.0065 ........ 0.0068
fix string #3 ........ 0.0116 ........ 0.0245 ...... 0.0063 ........ 0.0069
fix string #4 ........ 0.0105 ........ 0.0253 ...... 0.0083 ........ 0.0077
8-bit string #1 ...... 0.0126 ........ 0.0318 ...... 0.0075 ........ 0.0088
8-bit string #2 ...... 0.0121 ........ 0.0295 ...... 0.0076 ........ 0.0086
8-bit string #3 ...... 0.0125 ........ 0.0293 ...... 0.0130 ........ 0.0093
16-bit string #1 ..... 0.0159 ........ 0.0368 ...... 0.0117 ........ 0.0086
16-bit string #2 ..... 0.1547 ........ 0.1686 ...... 0.1516 ........ 0.1373
32-bit string ........ 0.1558 ........ 0.1729 ...... 0.1511 ........ 0.1396
wide char string #1 .. 0.0098 ........ 0.0237 ...... 0.0066 ........ 0.0065
wide char string #2 .. 0.0128 ........ 0.0291 ...... 0.0061 ........ 0.0082
8-bit binary #1 ........... I ............. I ........... F ............. I
8-bit binary #2 ........... I ............. I ........... F ............. I
8-bit binary #3 ........... I ............. I ........... F ............. I
16-bit binary ............. I ............. I ........... F ............. I
32-bit binary ............. I ............. I ........... F ............. I
fix array #1 ......... 0.0040 ........ 0.0129 ...... 0.0120 ........ 0.0058
fix array #2 ......... 0.0279 ........ 0.0390 ...... 0.0143 ........ 0.0165
fix array #3 ......... 0.0415 ........ 0.0463 ...... 0.0162 ........ 0.0187
16-bit array #1 ...... 0.1349 ........ 0.1628 ...... 0.0334 ........ 0.0341
16-bit array #2 ........... S ............. S ........... S ............. S
32-bit array .............. S ............. S ........... S ............. S
complex array ............. I ............. I ........... F ............. F
fix map #1 ................ I ............. I ........... F ............. I
fix map #2 ........... 0.0345 ........ 0.0391 ...... 0.0143 ........ 0.0168
fix map #3 ................ I ............. I ........... F ............. I
fix map #4 ........... 0.0459 ........ 0.0473 ...... 0.0151 ........ 0.0163
16-bit map #1 ........ 0.2518 ........ 0.2962 ...... 0.0400 ........ 0.0490
16-bit map #2 ............. S ............. S ........... S ............. S
32-bit map ................ S ............. S ........... S ............. S
complex map .......... 0.2380 ........ 0.2682 ...... 0.0545 ........ 0.0579
fixext 1 .................. I ............. I ........... F ............. F
fixext 2 .................. I ............. I ........... F ............. F
fixext 4 .................. I ............. I ........... F ............. F
fixext 8 .................. I ............. I ........... F ............. F
fixext 16 ................. I ............. I ........... F ............. F
8-bit ext ................. I ............. I ........... F ............. F
16-bit ext ................ I ............. I ........... F ............. F
32-bit ext ................ I ............. I ........... F ............. F
32-bit timestamp #1 ....... I ............. I ........... F ............. F
32-bit timestamp #2 ....... I ............. I ........... F ............. F
64-bit timestamp #1 ....... I ............. I ........... F ............. F
64-bit timestamp #2 ....... I ............. I ........... F ............. F
64-bit timestamp #3 ....... I ............. I ........... F ............. F
96-bit timestamp #1 ....... I ............. I ........... F ............. F
96-bit timestamp #2 ....... I ............. I ........... F ............. F
96-bit timestamp #3 ....... I ............. I ........... F ............. F
===========================================================================
Total                  1.5625          2.3866        0.7735          0.7243
Skipped                     4               4             4               4
Failed                      0               0            24              17
Ignored                    24              24             0               7

With JIT:

MP_BENCH_TARGETS=pure_p,pure_u,pecl_p,pecl_u \
php -n -dextension=msgpack.so -dzend_extension=opcache.so \
-dpcre.jit=1 -dopcache.jit_buffer_size=64M -dopcache.jit=tracing -dopcache.enable=1 -dopcache.enable_cli=1 \
tests/bench.php

Example output

Filter: MessagePack\Tests\Perf\Filter\ListFilter
Rounds: 3
Iterations: 100000

===========================================================================
Test/Target            Packer  BufferUnpacker  msgpack_pack  msgpack_unpack
---------------------------------------------------------------------------
nil .................. 0.0001 ........ 0.0052 ...... 0.0053 ........ 0.0042
false ................ 0.0007 ........ 0.0060 ...... 0.0057 ........ 0.0043
true ................. 0.0008 ........ 0.0060 ...... 0.0056 ........ 0.0041
7-bit uint #1 ........ 0.0031 ........ 0.0046 ...... 0.0062 ........ 0.0041
7-bit uint #2 ........ 0.0021 ........ 0.0043 ...... 0.0062 ........ 0.0041
7-bit uint #3 ........ 0.0022 ........ 0.0044 ...... 0.0061 ........ 0.0040
5-bit sint #1 ........ 0.0030 ........ 0.0048 ...... 0.0062 ........ 0.0040
5-bit sint #2 ........ 0.0032 ........ 0.0046 ...... 0.0062 ........ 0.0040
5-bit sint #3 ........ 0.0031 ........ 0.0046 ...... 0.0062 ........ 0.0040
8-bit uint #1 ........ 0.0054 ........ 0.0079 ...... 0.0062 ........ 0.0050
8-bit uint #2 ........ 0.0051 ........ 0.0079 ...... 0.0064 ........ 0.0044
8-bit uint #3 ........ 0.0051 ........ 0.0082 ...... 0.0062 ........ 0.0044
16-bit uint #1 ....... 0.0077 ........ 0.0094 ...... 0.0065 ........ 0.0045
16-bit uint #2 ....... 0.0077 ........ 0.0094 ...... 0.0063 ........ 0.0045
16-bit uint #3 ....... 0.0077 ........ 0.0095 ...... 0.0064 ........ 0.0047
32-bit uint #1 ....... 0.0088 ........ 0.0119 ...... 0.0063 ........ 0.0043
32-bit uint #2 ....... 0.0089 ........ 0.0117 ...... 0.0062 ........ 0.0039
32-bit uint #3 ....... 0.0089 ........ 0.0118 ...... 0.0063 ........ 0.0044
64-bit uint #1 ....... 0.0097 ........ 0.0155 ...... 0.0063 ........ 0.0045
64-bit uint #2 ....... 0.0095 ........ 0.0153 ...... 0.0061 ........ 0.0045
64-bit uint #3 ....... 0.0096 ........ 0.0156 ...... 0.0063 ........ 0.0047
8-bit int #1 ......... 0.0053 ........ 0.0083 ...... 0.0062 ........ 0.0044
8-bit int #2 ......... 0.0052 ........ 0.0080 ...... 0.0062 ........ 0.0044
8-bit int #3 ......... 0.0052 ........ 0.0080 ...... 0.0062 ........ 0.0043
16-bit int #1 ........ 0.0089 ........ 0.0097 ...... 0.0069 ........ 0.0046
16-bit int #2 ........ 0.0075 ........ 0.0093 ...... 0.0063 ........ 0.0043
16-bit int #3 ........ 0.0075 ........ 0.0094 ...... 0.0062 ........ 0.0046
32-bit int #1 ........ 0.0086 ........ 0.0122 ...... 0.0063 ........ 0.0044
32-bit int #2 ........ 0.0087 ........ 0.0120 ...... 0.0066 ........ 0.0046
32-bit int #3 ........ 0.0086 ........ 0.0121 ...... 0.0060 ........ 0.0044
64-bit int #1 ........ 0.0096 ........ 0.0149 ...... 0.0060 ........ 0.0045
64-bit int #2 ........ 0.0096 ........ 0.0157 ...... 0.0062 ........ 0.0044
64-bit int #3 ........ 0.0096 ........ 0.0160 ...... 0.0063 ........ 0.0046
64-bit int #4 ........ 0.0097 ........ 0.0157 ...... 0.0061 ........ 0.0044
64-bit float #1 ...... 0.0079 ........ 0.0153 ...... 0.0056 ........ 0.0044
64-bit float #2 ...... 0.0079 ........ 0.0152 ...... 0.0057 ........ 0.0045
64-bit float #3 ...... 0.0079 ........ 0.0155 ...... 0.0057 ........ 0.0044
fix string #1 ........ 0.0010 ........ 0.0045 ...... 0.0071 ........ 0.0044
fix string #2 ........ 0.0048 ........ 0.0075 ...... 0.0070 ........ 0.0060
fix string #3 ........ 0.0048 ........ 0.0086 ...... 0.0068 ........ 0.0060
fix string #4 ........ 0.0050 ........ 0.0088 ...... 0.0070 ........ 0.0059
8-bit string #1 ...... 0.0081 ........ 0.0129 ...... 0.0069 ........ 0.0062
8-bit string #2 ...... 0.0086 ........ 0.0128 ...... 0.0069 ........ 0.0065
8-bit string #3 ...... 0.0086 ........ 0.0126 ...... 0.0115 ........ 0.0065
16-bit string #1 ..... 0.0105 ........ 0.0137 ...... 0.0128 ........ 0.0068
16-bit string #2 ..... 0.1510 ........ 0.1486 ...... 0.1526 ........ 0.1391
32-bit string ........ 0.1517 ........ 0.1475 ...... 0.1504 ........ 0.1370
wide char string #1 .. 0.0044 ........ 0.0085 ...... 0.0067 ........ 0.0057
wide char string #2 .. 0.0081 ........ 0.0125 ...... 0.0069 ........ 0.0063
8-bit binary #1 ........... I ............. I ........... F ............. I
8-bit binary #2 ........... I ............. I ........... F ............. I
8-bit binary #3 ........... I ............. I ........... F ............. I
16-bit binary ............. I ............. I ........... F ............. I
32-bit binary ............. I ............. I ........... F ............. I
fix array #1 ......... 0.0014 ........ 0.0059 ...... 0.0132 ........ 0.0055
fix array #2 ......... 0.0146 ........ 0.0156 ...... 0.0155 ........ 0.0148
fix array #3 ......... 0.0211 ........ 0.0229 ...... 0.0179 ........ 0.0180
16-bit array #1 ...... 0.0673 ........ 0.0498 ...... 0.0343 ........ 0.0388
16-bit array #2 ........... S ............. S ........... S ............. S
32-bit array .............. S ............. S ........... S ............. S
complex array ............. I ............. I ........... F ............. F
fix map #1 ................ I ............. I ........... F ............. I
fix map #2 ........... 0.0148 ........ 0.0180 ...... 0.0156 ........ 0.0179
fix map #3 ................ I ............. I ........... F ............. I
fix map #4 ........... 0.0252 ........ 0.0201 ...... 0.0214 ........ 0.0167
16-bit map #1 ........ 0.1027 ........ 0.0836 ...... 0.0388 ........ 0.0510
16-bit map #2 ............. S ............. S ........... S ............. S
32-bit map ................ S ............. S ........... S ............. S
complex map .......... 0.1104 ........ 0.1010 ...... 0.0556 ........ 0.0602
fixext 1 .................. I ............. I ........... F ............. F
fixext 2 .................. I ............. I ........... F ............. F
fixext 4 .................. I ............. I ........... F ............. F
fixext 8 .................. I ............. I ........... F ............. F
fixext 16 ................. I ............. I ........... F ............. F
8-bit ext ................. I ............. I ........... F ............. F
16-bit ext ................ I ............. I ........... F ............. F
32-bit ext ................ I ............. I ........... F ............. F
32-bit timestamp #1 ....... I ............. I ........... F ............. F
32-bit timestamp #2 ....... I ............. I ........... F ............. F
64-bit timestamp #1 ....... I ............. I ........... F ............. F
64-bit timestamp #2 ....... I ............. I ........... F ............. F
64-bit timestamp #3 ....... I ............. I ........... F ............. F
96-bit timestamp #1 ....... I ............. I ........... F ............. F
96-bit timestamp #2 ....... I ............. I ........... F ............. F
96-bit timestamp #3 ....... I ............. I ........... F ............. F
===========================================================================
Total                  0.9642          1.0909        0.8224          0.7213
Skipped                     4               4             4               4
Failed                      0               0            24              17
Ignored                    24              24             0               7

Note that the msgpack extension (v2.1.2) doesn't support ext, bin and UTF-8 str types.

License

The library is released under the MIT License. See the bundled LICENSE file for details.

Author: rybakit
Source Code: https://github.com/rybakit/msgpack.php
License: MIT License

#php 

Why is my Cash App Transfer Failed [Solution 2021]?

Why is my Cash App Transfer Failed [Solution 2021]? yes sure you can use this app for online Payment Transfer, Call @+1 (855)698 5775 If you are facing any issues related with cash app transfer then you can contact on this number, If you are having trouble making any transfer on Cash App and your payment fails on Cash App then you need to first check if your Cash App is updated on your mobile or not. If not, then update the app to the latest version to make payments smoothly.Cash App transfers are almost always instantaneous. However, there are occasions when the app throws an exception, asking you to wait a little longer — aka 'Payment Pending. ’ It simply means the transfer has been initiated but cannot be fulfilled instantly

My Cash App Transfer Failed For My Protection

Cash App may fail your transaction to protect you from any fraud. Cash App monitors your account and if any suspicious activity takes place, it fails the transaction for your protection. This happens in order to save you from any scam and lose your money.

### Why would cash APP decline a payment for my protection?

Payments on Cash App with the error “failed for my Protection” may be declined for a few reasons. Some of the most common reasons include: Your bank or card issuer is declining the transaction, Incorrect details and the payment has triggered one of Cash App automated security flags.

How do I enable direct deposit on a cash App?

How do I enable direct deposit on a cash App? After successful activation, the employer will be able to pay your paycheck directly into your Cash App account. Follow these steps. Firstly, open the Cash App and click on the profile icon or Balance tab-present in the updated version of Cash App. After that, now navigate down to get the option “Direct Deposit”.

Relaated articles :- Why is my Cash App direct deposit failed ?

Why Cash App Transfer Failed For My Protection

How to Fix Cash App Payments for my protection? If you’re having trouble sending payment, make sure to check if you have added your correct credit or debit card to the Cash App, the best thing to do is double-check or reach out to your card issuer to confirm that there are no issues. If you’re waiting to receive more than $10,000 via direct deposit, your best bet is to request that the sender split the payment into two parts …

How to Fix Cash App Transfer Failed Earlier?

Cash App transfer failed for your security means that the transaction you are trying to make went unsuccessful. It might be any kind of transfer such as bank transfer, online or offline payment, cash withdrawal at an ATM and sending or receiving money to and from contacts.

### How do I fix my cash APP failed for my protection?

If you have got the Cash app Transfer failed error, then you have the option to raise a dispute for an unapproved transaction since you are a bank account holder. It is your right to dispute the unauthorized deductions made by the App

### How to Fix Cash App Transfer Failed ?

Cash app has witnessed considerable growth, with more than 30 million users. It is widely used in the US in order to make payments or transfer money to family and friends. The platform processes millions and millions of transactions on a daily basis. But this percentage is observed to have a huge drop due to Cash App transfer failed issues. About 10% of the total transactions are failing almost daily due to different reasons.
If you are having a similar sort of problem where the Cash App transaction failed, this article might be a useful one for you. It tells about the causes of the Cash app transfer failed error and mentions a few fixes that work for most of the causes as well. Hence, if you are encountering the same problem, read through this article to find your possible fix.

### Major Causes Behind Cash App Transfer Failed

  1. Improper internet connection
  2. Insufficient account balance
  3. Bank account fraud block
  4. Transaction blocked by Cash App

### How to Fix Cash App Transfer Failed

  1. Check a bank balance
  2. Using other bank accounts or cards
  3. Verifying the bank account details
  4. Contacting Cash app support team
  5. Contacting bank

### Major Causes Behind Cash App Transfer Failed

Although the number of causes behind a Cash app seems to be quite high, some of the key reasons are as mentioned:

Improper internet connection

Since all your transactions take place online, it requires a strong internet connection. Therefore, whenever you encounter a payment failure issue, the first thing is to check for your internet connectivity. For more efficient results, it is always better to connect your device to reliable Wi-Fi, if available.

Insufficient account balance

It happens quite often when users try to make a possible transaction without checking their account balance. If in case you don’t have enough amount in your cash app wallet or bank account, your transaction will fail.

Bank account fraud block

Whether you are having your account with Bank of America, PNC, or wherever, all these banks probably have their own fraud departments. These departments flag certain services as scams/ frauds. And since there are already a lot of scams operated on the Cash app these days, it adds up as a considerable reason for them to block transactions.

Transaction blocked by Cash App

Cash app has now grown into a billion-dollar company with around 30+ million users. Therefore, in order to maintain the security and privacy of its users, the Cash app has strict policies. So, if due to some reason, the application might have flagged the other person’s account as potential scam/ fraud, it might again cause a Cash app transfer failure.
These were some of the possible causes of Cash app transfer failed. However, most times, the following solutions might do a pretty good job of resolving your issues.

How do I fix my cash APP failed for my protection??

Since the whole thing is about transactions, there could be a bunch of other causes behind a failed transfer. These are just some basic fixes that actually work in most of the above-mentioned causes.

Related articles- How To Cash App Direct Deposit Failed ?SOlution | tranter-it

Check a bank balance

If your account balance is low in the case of the Cash app, it will eventually result in a failed transaction. However, to avoid such messages, it is a wise habit to always check your account balance or Cash app wallet balance before making a transfer.

Related article :- What happens when the cash app direct deposit failed? How to fix it?

Using other bank accounts or cards

Another primary reason behind encountering failed transactions is because of using blocked or rejected cards. Cash app often displays this error message basically due to server issues of the bank. To avoid such errors, you can try using a different credit/ debit card or bank account.

Verifying the bank account details

This is a very common mistake done by most users. Entering the wrong bank details will definitely lead to an cash app unsuccessful or failed transfer. Therefore, it is a good practice to be a little extra careful while entering such sensitive data.

Contacting Cash app support team

The Cash app might sometimes block your transactions, or it might flag the other person’s account as possible fraud in rare cases. In such situations, the wisest option is to contact the cash app’s support team and ask for assistance regarding the issue you are facing.

Contacting bank

If the bank itself terminates the transaction, contact your bank and ask for what reason the Cash app transfer failed through their system. They will inform you in case there are any serious issues and also advise the best way to overcome it.

Why is cash App declining my payment for my protection?

Cash App monitors your account for anything that looks out of the ordinary. If a potentially fraudulent payment occurs, we cancel it to prevent you from being charged. When this happens, your funds will instantly be returned to your Cash App balance or linked bank account.

Why does my Cash app keep saying Transfer failed?

Why does my Cash app keep saying Transfer failed?The reason why transfer fail every time can be because of the card which is updated on the account has expired or the details of the card are not correct. So, always you need to make sure that the card which is you are using is not expired and the details are correct.

##What does it mean when a cash app payment failed?

Cash App transfer failed for your security means that the transaction you are trying to make went unsuccessful. It might be any kind of transfer such as bank transfer, online or offline payment, cash withdrawal at ATM and sending or receiving money to and from contacts.

###Conclusion

Cash app has now grown quite popular with millions of users trusting its service. And undoubtedly, the application offers a great platform for easy transfer of money along with its other services. However, a lot of scams have already been reported regarding this application. So, if anyhow you face some sort of trouble and encounter the Cash app transfer failure, these tricks must help you find a way to resolve the problem and make efficient money transfer over the app. Let us know if this article helps you or if we missed out on something.

Bottom Link :-

cash app transfer failed | cash app this transfer failed | how do i fix my cash app failed for my protection why does cash app say transfer failed | trying to add cash to cash app transfer failed | cash app transfer failed add cash | how to fix cash app transfer failed | cash app transfer failed 2020 | how to fix cash app failed for my protection | why is my cash app saying transfer failed | cash app transfer failed for my protection | why is my cash app transfer failing | why is transfer failing on cash app | how to fix transfer failed on cash app | why cash app transfer failed | why does my cash app transfer keep failing | cash app transfer failed fix | what does transfer failed mean on cash app | cash app money transfer failed | what does it mean | when cash app failed for my protection | why is my transfer failed cash app cash app transfer failed 2021 | what does transfer failed on cash app mean | why did cash app transfer fail | why do cash app keep saying transfer failed | when cash app says transfer failed | my cash app keeps saying transfer failed | cash app transfer has failed | transfer failed message on cash app | why is cash app transfer failing
0

#cash app transfer failed #how to fix transfer failed on cash app #cash app transfer failed for my protection #why is my cash app transfer failing #cash app transfer failed 2021 #cash app this transfer failed

Plpgsql Check: Extension That Allows to Check Plpgsql Source Code.

plpgsql_check

I founded this project, because I wanted to publish the code I wrote in the last two years, when I tried to write enhanced checking for PostgreSQL upstream. It was not fully successful - integration into upstream requires some larger plpgsql refactoring - probably it will not be done in next years (now is Dec 2013). But written code is fully functional and can be used in production (and it is used in production). So, I created this extension to be available for all plpgsql developers.

If you like it and if you would to join to development of this extension, register yourself to postgresql extension hacking google group.

Features

  • check fields of referenced database objects and types inside embedded SQL
  • using correct types of function parameters
  • unused variables and function argumens, unmodified OUT argumens
  • partially detection of dead code (due RETURN command)
  • detection of missing RETURN command in function
  • try to identify unwanted hidden casts, that can be performance issue like unused indexes
  • possibility to collect relations and functions used by function
  • possibility to check EXECUTE stmt agaist SQL injection vulnerability

I invite any ideas, patches, bugreports.

plpgsql_check is next generation of plpgsql_lint. It allows to check source code by explicit call plpgsql_check_function.

PostgreSQL PostgreSQL 10, 11, 12, 13 and 14 are supported.

The SQL statements inside PL/pgSQL functions are checked by validator for semantic errors. These errors can be found by plpgsql_check_function:

Active mode

postgres=# CREATE EXTENSION plpgsql_check;
LOAD
postgres=# CREATE TABLE t1(a int, b int);
CREATE TABLE

postgres=#
CREATE OR REPLACE FUNCTION public.f1()
RETURNS void
LANGUAGE plpgsql
AS $function$
DECLARE r record;
BEGIN
  FOR r IN SELECT * FROM t1
  LOOP
    RAISE NOTICE '%', r.c; -- there is bug - table t1 missing "c" column
  END LOOP;
END;
$function$;

CREATE FUNCTION

postgres=# select f1(); -- execution doesn't find a bug due to empty table t1
  f1 
 ────
   
 (1 row)

postgres=# \x
Expanded display is on.
postgres=# select * from plpgsql_check_function_tb('f1()');
─[ RECORD 1 ]───────────────────────────
functionid │ f1
lineno     │ 6
statement  │ RAISE
sqlstate   │ 42703
message    │ record "r" has no field "c"
detail     │ [null]
hint       │ [null]
level      │ error
position   │ 0
query      │ [null]

postgres=# \sf+ f1
    CREATE OR REPLACE FUNCTION public.f1()
     RETURNS void
     LANGUAGE plpgsql
1       AS $function$
2       DECLARE r record;
3       BEGIN
4         FOR r IN SELECT * FROM t1
5         LOOP
6           RAISE NOTICE '%', r.c; -- there is bug - table t1 missing "c" column
7         END LOOP;
8       END;
9       $function$

Function plpgsql_check_function() has three possible formats: text, json or xml

select * from plpgsql_check_function('f1()', fatal_errors := false);
                         plpgsql_check_function                         
------------------------------------------------------------------------
 error:42703:4:SQL statement:column "c" of relation "t1" does not exist
 Query: update t1 set c = 30
 --                   ^
 error:42P01:7:RAISE:missing FROM-clause entry for table "r"
 Query: SELECT r.c
 --            ^
 error:42601:7:RAISE:too few parameters specified for RAISE
(7 rows)

postgres=# select * from plpgsql_check_function('fx()', format:='xml');
                 plpgsql_check_function                     
────────────────────────────────────────────────────────────────
 <Function oid="16400">                                        ↵
   <Issue>                                                     ↵
     <Level>error</level>                                      ↵
     <Sqlstate>42P01</Sqlstate>                                ↵
     <Message>relation "foo111" does not exist</Message>       ↵
     <Stmt lineno="3">RETURN</Stmt>                            ↵
     <Query position="23">SELECT (select a from foo111)</Query>↵
   </Issue>                                                    ↵
  </Function>
 (1 row)

Arguments

You can set level of warnings via function's parameters:

Mandatory arguments

  • function name or function signature - these functions requires function specification. Any function in PostgreSQL can be specified by Oid or by name or by signature. When you know oid or complete function's signature, you can use a regprocedure type parameter like 'fx()'::regprocedure or 16799::regprocedure. Possible alternative is using a name only, when function's name is unique - like 'fx'. When the name is not unique or the function doesn't exists it raises a error.

Optional arguments

relid DEFAULT 0 - oid of relation assigned with trigger function. It is necessary for check of any trigger function.

fatal_errors boolean DEFAULT true - stop on first error

other_warnings boolean DEFAULT true - show warnings like different attributes number in assignmenet on left and right side, variable overlaps function's parameter, unused variables, unwanted casting, ..

extra_warnings boolean DEFAULT true - show warnings like missing RETURN, shadowed variables, dead code, never read (unused) function's parameter, unmodified variables, modified auto variables, ..

performance_warnings boolean DEFAULT false - performance related warnings like declared type with type modificator, casting, implicit casts in where clause (can be reason why index is not used), ..

security_warnings boolean DEFAULT false - security related checks like SQL injection vulnerability detection

anyelementtype regtype DEFAULT 'int' - a real type used instead anyelement type

anyenumtype regtype DEFAULT '-' - a real type used instead anyenum type

anyrangetype regtype DEFAULT 'int4range' - a real type used instead anyrange type

anycompatibletype DEFAULT 'int' - a real type used instead anycompatible type

anycompatiblerangetype DEFAULT 'int4range' - a real type used instead anycompatible range type

without_warnings DEFAULT false - disable all warnings

all_warnings DEFAULT false - enable all warnings

newtable DEFAULT NULL, oldtable DEFAULT NULL - the names of NEW or OLD transitive tables. These parameters are required when transitive tables are used.

Triggers

When you want to check any trigger, you have to enter a relation that will be used together with trigger function

CREATE TABLE bar(a int, b int);

postgres=# \sf+ foo_trg
    CREATE OR REPLACE FUNCTION public.foo_trg()
         RETURNS trigger
         LANGUAGE plpgsql
1       AS $function$
2       BEGIN
3         NEW.c := NEW.a + NEW.b;
4         RETURN NEW;
5       END;
6       $function$

Missing relation specification

postgres=# select * from plpgsql_check_function('foo_trg()');
ERROR:  missing trigger relation
HINT:  Trigger relation oid must be valid

Correct trigger checking (with specified relation)

postgres=# select * from plpgsql_check_function('foo_trg()', 'bar');
                 plpgsql_check_function                 
--------------------------------------------------------
 error:42703:3:assignment:record "new" has no field "c"
(1 row)

For triggers with transitive tables you can set a oldtable or newtable parameters:

create or replace function footab_trig_func()
returns trigger as $$
declare x int;
begin
  if false then
    -- should be ok;
    select count(*) from newtab into x; 

    -- should fail;
    select count(*) from newtab where d = 10 into x;
  end if;
  return null;
end;
$$ language plpgsql;

select * from plpgsql_check_function('footab_trig_func','footab', newtable := 'newtab');

Mass check

You can use the plpgsql_check_function for mass check functions and mass check triggers. Please, test following queries:

-- check all nontrigger plpgsql functions
SELECT p.oid, p.proname, plpgsql_check_function(p.oid)
   FROM pg_catalog.pg_namespace n
   JOIN pg_catalog.pg_proc p ON pronamespace = n.oid
   JOIN pg_catalog.pg_language l ON p.prolang = l.oid
  WHERE l.lanname = 'plpgsql' AND p.prorettype <> 2279;

or

SELECT p.proname, tgrelid::regclass, cf.*
   FROM pg_proc p
        JOIN pg_trigger t ON t.tgfoid = p.oid 
        JOIN pg_language l ON p.prolang = l.oid
        JOIN pg_namespace n ON p.pronamespace = n.oid,
        LATERAL plpgsql_check_function(p.oid, t.tgrelid) cf
  WHERE n.nspname = 'public' and l.lanname = 'plpgsql'

or

-- check all plpgsql functions (functions or trigger functions with defined triggers)
SELECT
    (pcf).functionid::regprocedure, (pcf).lineno, (pcf).statement,
    (pcf).sqlstate, (pcf).message, (pcf).detail, (pcf).hint, (pcf).level,
    (pcf)."position", (pcf).query, (pcf).context
FROM
(
    SELECT
        plpgsql_check_function_tb(pg_proc.oid, COALESCE(pg_trigger.tgrelid, 0)) AS pcf
    FROM pg_proc
    LEFT JOIN pg_trigger
        ON (pg_trigger.tgfoid = pg_proc.oid)
    WHERE
        prolang = (SELECT lang.oid FROM pg_language lang WHERE lang.lanname = 'plpgsql') AND
        pronamespace <> (SELECT nsp.oid FROM pg_namespace nsp WHERE nsp.nspname = 'pg_catalog') AND
        -- ignore unused triggers
        (pg_proc.prorettype <> (SELECT typ.oid FROM pg_type typ WHERE typ.typname = 'trigger') OR
         pg_trigger.tgfoid IS NOT NULL)
    OFFSET 0
) ss
ORDER BY (pcf).functionid::regprocedure::text, (pcf).lineno

Passive mode

Functions should be checked on start - plpgsql_check module must be loaded.

Configuration

plpgsql_check.mode = [ disabled | by_function | fresh_start | every_start ]
plpgsql_check.fatal_errors = [ yes | no ]

plpgsql_check.show_nonperformance_warnings = false
plpgsql_check.show_performance_warnings = false

Default mode is by_function, that means that the enhanced check is done only in active mode - by plpgsql_check_function. fresh_start means cold start.

You can enable passive mode by

load 'plpgsql'; -- 1.1 and higher doesn't need it
load 'plpgsql_check';
set plpgsql_check.mode = 'every_start';

SELECT fx(10); -- run functions - function is checked before runtime starts it

Limits

plpgsql_check should find almost all errors on really static code. When developer use some PLpgSQL's dynamic features like dynamic SQL or record data type, then false positives are possible. These should be rare - in well written code - and then the affected function should be redesigned or plpgsql_check should be disabled for this function.

CREATE OR REPLACE FUNCTION f1()
RETURNS void AS $$
DECLARE r record;
BEGIN
  FOR r IN EXECUTE 'SELECT * FROM t1'
  LOOP
    RAISE NOTICE '%', r.c;
  END LOOP;
END;
$$ LANGUAGE plpgsql SET plpgsql.enable_check TO false;

A usage of plpgsql_check adds a small overhead (in enabled passive mode) and you should use it only in develop or preprod environments.

Dynamic SQL

This module doesn't check queries that are assembled in runtime. It is not possible to identify results of dynamic queries - so plpgsql_check cannot to set correct type to record variables and cannot to check a dependent SQLs and expressions.

When type of record's variable is not know, you can assign it explicitly with pragma type:

DECLARE r record;
BEGIN
  EXECUTE format('SELECT * FROM %I', _tablename) INTO r;
  PERFORM plpgsql_check_pragma('type: r (id int, processed bool)');
  IF NOT r.processed THEN
    ...

Attention: The SQL injection check can detect only some SQL injection vulnerabilities. This tool cannot be used for security audit! Some issues should not be detected. This check can raise false alarms too - probably when variable is sanitized by other command or when value is of some compose type. 

Refcursors

plpgsql_check should not to detect structure of referenced cursors. A reference on cursor in PLpgSQL is implemented as name of global cursor. In check time, the name is not known (not in all possibilities), and global cursor doesn't exist. It is significant break for any static analyse. PLpgSQL cannot to set correct type for record variables and cannot to check a dependent SQLs and expressions. A solution is same like dynamic SQL. Don't use record variable as target when you use refcursor type or disable plpgsql_check for these functions.

CREATE OR REPLACE FUNCTION foo(refcur_var refcursor)
RETURNS void AS $$
DECLARE
  rec_var record;
BEGIN
  FETCH refcur_var INTO rec_var; -- this is STOP for plpgsql_check
  RAISE NOTICE '%', rec_var;     -- record rec_var is not assigned yet error

In this case a record type should not be used (use known rowtype instead):

CREATE OR REPLACE FUNCTION foo(refcur_var refcursor)
RETURNS void AS $$
DECLARE
  rec_var some_rowtype;
BEGIN
  FETCH refcur_var INTO rec_var;
  RAISE NOTICE '%', rec_var;

Temporary tables

plpgsql_check cannot verify queries over temporary tables that are created in plpgsql's function runtime. For this use case it is necessary to create a fake temp table or disable plpgsql_check for this function.

In reality temp tables are stored in own (per user) schema with higher priority than persistent tables. So you can do (with following trick safetly):

CREATE OR REPLACE FUNCTION public.disable_dml()
RETURNS trigger
LANGUAGE plpgsql AS $function$
BEGIN
  RAISE EXCEPTION SQLSTATE '42P01'
     USING message = format('this instance of %I table doesn''t allow any DML operation', TG_TABLE_NAME),
           hint = format('you should to run "CREATE TEMP TABLE %1$I(LIKE %1$I INCLUDING ALL);" statement',
                         TG_TABLE_NAME);
  RETURN NULL;
END;
$function$;

CREATE TABLE foo(a int, b int); -- doesn't hold data ever
CREATE TRIGGER foo_disable_dml
   BEFORE INSERT OR UPDATE OR DELETE ON foo
   EXECUTE PROCEDURE disable_dml();

postgres=# INSERT INTO  foo VALUES(10,20);
ERROR:  this instance of foo table doesn't allow any DML operation
HINT:  you should to run "CREATE TEMP TABLE foo(LIKE foo INCLUDING ALL);" statement
postgres=# 

CREATE TABLE
postgres=# INSERT INTO  foo VALUES(10,20);
INSERT 0 1

This trick emulates GLOBAL TEMP tables partially and it allows a statical validation. Other possibility is using a [template foreign data wrapper] (https://github.com/okbob/template_fdw)

You can use pragma table and create ephemeral table:

BEGIN
   CREATE TEMP TABLE xxx(a int);
   PERFORM plpgsql_check_pragma('table: xxx(a int)');
   INSERT INTO xxx VALUES(10);

Dependency list

A function plpgsql_show_dependency_tb can show all functions, operators and relations used inside processed function:

postgres=# select * from plpgsql_show_dependency_tb('testfunc(int,float)');
┌──────────┬───────┬────────┬─────────┬────────────────────────────┐
│   type   │  oid  │ schema │  name   │           params           │
╞══════════╪═══════╪════════╪═════════╪════════════════════════════╡
│ FUNCTION │ 36008 │ public │ myfunc1 │ (integer,double precision) │
│ FUNCTION │ 35999 │ public │ myfunc2 │ (integer,double precision) │
│ OPERATOR │ 36007 │ public │ **      │ (integer,integer)          │
│ RELATION │ 36005 │ public │ myview  │                            │
│ RELATION │ 36002 │ public │ mytable │                            │
└──────────┴───────┴────────┴─────────┴────────────────────────────┘
(4 rows)

Profiler

The plpgsql_check contains simple profiler of plpgsql functions and procedures. It can work with/without a access to shared memory. It depends on shared_preload_libraries config. When plpgsql_check was initialized by shared_preload_libraries, then it can allocate shared memory, and function's profiles are stored there. When plpgsql_check cannot to allocate shared momory, the profile is stored in session memory.

Due dependencies, shared_preload_libraries should to contains plpgsql first

postgres=# show shared_preload_libraries ;
┌──────────────────────────┐
│ shared_preload_libraries │
╞══════════════════════════╡
│ plpgsql,plpgsql_check    │
└──────────────────────────┘
(1 row)

The profiler is active when GUC plpgsql_check.profiler is on. The profiler doesn't require shared memory, but if there are not shared memory, then the profile is limmitted just to active session.

When plpgsql_check is initialized by shared_preload_libraries, another GUC is available to configure the amount of shared memory used by the profiler: plpgsql_check.profiler_max_shared_chunks. This defines the maximum number of statements chunk that can be stored in shared memory. For each plpgsql function (or procedure), the whole content is split into chunks of 30 statements. If needed, multiple chunks can be used to store the whole content of a single function. A single chunk is 1704 bytes. The default value for this GUC is 15000, which should be enough for big projects containing hundred of thousands of statements in plpgsql, and will consume about 24MB of memory. If your project doesn't require that much number of chunks, you can set this parameter to a smaller number in order to decrease the memory usage. The minimum value is 50 (which should consume about 83kB of memory), and the maximum value is 100000 (which should consume about 163MB of memory). Changing this parameter requires a PostgreSQL restart.

The profiler will also retrieve the query identifier for each instruction that contains an expression or optimizable statement. Note that this requires pg_stat_statements, or another similar third-party extension), to be installed. There are some limitations to the query identifier retrieval:

  • if a plpgsql expression contains underlying statements, only the top level query identifier will be retrieved
  • the profiler doesn't compute query identifier by itself but relies on external extension, such as pg_stat_statements, for that. It means that depending on the external extension behavior, you may not be able to see a query identifier for some statements. That's for instance the case with DDL statements, as pg_stat_statements doesn't expose the query identifier for such queries.
  • a query identifier is retrieved only for instructions containing expressions. This means that plpgsql_profiler_function_tb() function can report less query identifier than instructions on a single line.

Attention: A update of shared profiles can decrease performance on servers under higher load.

The profile can be displayed by function plpgsql_profiler_function_tb:

postgres=# select lineno, avg_time, source from plpgsql_profiler_function_tb('fx(int)');
┌────────┬──────────┬───────────────────────────────────────────────────────────────────┐
│ lineno │ avg_time │                              source                               │
╞════════╪══════════╪═══════════════════════════════════════════════════════════════════╡
│      1 │          │                                                                   │
│      2 │          │ declare result int = 0;                                           │
│      3 │    0.075 │ begin                                                             │
│      4 │    0.202 │   for i in 1..$1 loop                                             │
│      5 │    0.005 │     select result + i into result; select result + i into result; │
│      6 │          │   end loop;                                                       │
│      7 │        0 │   return result;                                                  │
│      8 │          │ end;                                                              │
└────────┴──────────┴───────────────────────────────────────────────────────────────────┘
(9 rows)

The profile per statements (not per line) can be displayed by function plpgsql_profiler_function_statements_tb:

        CREATE OR REPLACE FUNCTION public.fx1(a integer)
         RETURNS integer
         LANGUAGE plpgsql
1       AS $function$
2       begin
3         if a > 10 then
4           raise notice 'ahoj';
5           return -1;
6         else
7           raise notice 'nazdar';
8           return 1;
9         end if;
10      end;
11      $function$

postgres=# select stmtid, parent_stmtid, parent_note, lineno, exec_stmts, stmtname
             from plpgsql_profiler_function_statements_tb('fx1');
┌────────┬───────────────┬─────────────┬────────┬────────────┬─────────────────┐
│ stmtid │ parent_stmtid │ parent_note │ lineno │ exec_stmts │    stmtname     │
╞════════╪═══════════════╪═════════════╪════════╪════════════╪═════════════════╡
│      0 │             ∅ │ ∅           │      2 │          0 │ statement block │
│      1 │             0 │ body        │      3 │          0 │ IF              │
│      2 │             1 │ then body   │      4 │          0 │ RAISE           │
│      3 │             1 │ then body   │      5 │          0 │ RETURN          │
│      4 │             1 │ else body   │      7 │          0 │ RAISE           │
│      5 │             1 │ else body   │      8 │          0 │ RETURN          │
└────────┴───────────────┴─────────────┴────────┴────────────┴─────────────────┘
(6 rows)

All stored profiles can be displayed by calling function plpgsql_profiler_functions_all:

postgres=# select * from plpgsql_profiler_functions_all();
┌───────────────────────┬────────────┬────────────┬──────────┬─────────────┬──────────┬──────────┐
│        funcoid        │ exec_count │ total_time │ avg_time │ stddev_time │ min_time │ max_time │
╞═══════════════════════╪════════════╪════════════╪══════════╪═════════════╪══════════╪══════════╡
│ fxx(double precision) │          1 │       0.01 │     0.01 │        0.00 │     0.01 │     0.01 │
└───────────────────────┴────────────┴────────────┴──────────┴─────────────┴──────────┴──────────┘
(1 row)

There are two functions for cleaning stored profiles: plpgsql_profiler_reset_all() and plpgsql_profiler_reset(regprocedure).

Coverage metrics

plpgsql_check provides two functions:

  • plpgsql_coverage_statements(name)
  • plpgsql_coverage_branches(name)

Note

There is another very good PLpgSQL profiler - https://bitbucket.org/openscg/plprofiler

My extension is designed to be simple for use and practical. Nothing more or less.

plprofiler is more complex. It build call graphs and from this graph it can creates flame graph of execution times.

Both extensions can be used together with buildin PostgreSQL's feature - tracking functions.

set track_functions to 'pl';
...
select * from pg_stat_user_functions;

Tracer

plpgsql_check provides a tracing possibility - in this mode you can see notices on start or end functions (terse and default verbosity) and start or end statements (verbose verbosity). For default and verbose verbosity the content of function arguments is displayed. The content of related variables are displayed when verbosity is verbose.

postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #0 ->> start of inline_code_block (Oid=0)
NOTICE:  #2   ->> start of function fx(integer,integer,date,text) (Oid=16405)
NOTICE:  #2        call by inline_code_block line 1 at PERFORM
NOTICE:  #2       "a" => '10', "b" => null, "c" => '2020-08-03', "d" => 'stěhule'
NOTICE:  #4     ->> start of function fx(integer) (Oid=16404)
NOTICE:  #4          call by fx(integer,integer,date,text) line 1 at PERFORM
NOTICE:  #4         "a" => '10'
NOTICE:  #4     <<- end of function fx (elapsed time=0.098 ms)
NOTICE:  #2   <<- end of function fx (elapsed time=0.399 ms)
NOTICE:  #0 <<- end of block (elapsed time=0.754 ms)

The number after # is a execution frame counter (this number is related to deep of error context stack). It allows to pair start end and of function.

Tracing is enabled by setting plpgsql_check.tracer to on. Attention - enabling this behaviour has significant negative impact on performance (unlike the profiler). You can set a level for output used by tracer plpgsql_check.tracer_errlevel (default is notice). The output content is limited by length specified by plpgsql_check.tracer_variable_max_length configuration variable.

In terse verbose mode the output is reduced:

postgres=# set plpgsql_check.tracer_verbosity TO terse;
SET
postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #0 start of inline code block (oid=0)
NOTICE:  #2 start of fx (oid=16405)
NOTICE:  #4 start of fx (oid=16404)
NOTICE:  #4 end of fx
NOTICE:  #2 end of fx
NOTICE:  #0 end of inline code block

In verbose mode the output is extended about statement details:

postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #0            ->> start of block inline_code_block (oid=0)
NOTICE:  #0.1       1  --> start of PERFORM
NOTICE:  #2              ->> start of function fx(integer,integer,date,text) (oid=16405)
NOTICE:  #2                   call by inline_code_block line 1 at PERFORM
NOTICE:  #2                  "a" => '10', "b" => null, "c" => '2020-08-04', "d" => 'stěhule'
NOTICE:  #2.1       1    --> start of PERFORM
NOTICE:  #2.1                "a" => '10'
NOTICE:  #4                ->> start of function fx(integer) (oid=16404)
NOTICE:  #4                     call by fx(integer,integer,date,text) line 1 at PERFORM
NOTICE:  #4                    "a" => '10'
NOTICE:  #4.1       6      --> start of assignment
NOTICE:  #4.1                  "a" => '10', "b" => '20'
NOTICE:  #4.1              <-- end of assignment (elapsed time=0.076 ms)
NOTICE:  #4.1                  "res" => '130'
NOTICE:  #4.2       7      --> start of RETURN
NOTICE:  #4.2                  "res" => '130'
NOTICE:  #4.2              <-- end of RETURN (elapsed time=0.054 ms)
NOTICE:  #4                <<- end of function fx (elapsed time=0.373 ms)
NOTICE:  #2.1            <-- end of PERFORM (elapsed time=0.589 ms)
NOTICE:  #2              <<- end of function fx (elapsed time=0.727 ms)
NOTICE:  #0.1          <-- end of PERFORM (elapsed time=1.147 ms)
NOTICE:  #0            <<- end of block (elapsed time=1.286 ms)

Special feature of tracer is tracing of ASSERT statement when plpgsql_check.trace_assert is on. When plpgsql_check.trace_assert_verbosity is DEFAULT, then all function's or procedure's variables are displayed when assert expression is false. When this configuration is VERBOSE then all variables from all plpgsql frames are displayed. This behaviour is independent on plpgsql.check_asserts value. It can be used, although the assertions are disabled in plpgsql runtime.

postgres=# set plpgsql_check.tracer to off;
postgres=# set plpgsql_check.trace_assert_verbosity TO verbose;

postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #4 PLpgSQL assert expression (false) on line 12 of fx(integer) is false
NOTICE:   "a" => '10', "res" => null, "b" => '20'
NOTICE:  #2 PL/pgSQL function fx(integer,integer,date,text) line 1 at PERFORM
NOTICE:   "a" => '10', "b" => null, "c" => '2020-08-05', "d" => 'stěhule'
NOTICE:  #0 PL/pgSQL function inline_code_block line 1 at PERFORM
ERROR:  assertion failed
CONTEXT:  PL/pgSQL function fx(integer) line 12 at ASSERT
SQL statement "SELECT fx(a)"
PL/pgSQL function fx(integer,integer,date,text) line 1 at PERFORM
SQL statement "SELECT fx(10,null, 'now', e'stěhule')"
PL/pgSQL function inline_code_block line 1 at PERFORM

postgres=# set plpgsql.check_asserts to off;
SET
postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #4 PLpgSQL assert expression (false) on line 12 of fx(integer) is false
NOTICE:   "a" => '10', "res" => null, "b" => '20'
NOTICE:  #2 PL/pgSQL function fx(integer,integer,date,text) line 1 at PERFORM
NOTICE:   "a" => '10', "b" => null, "c" => '2020-08-05', "d" => 'stěhule'
NOTICE:  #0 PL/pgSQL function inline_code_block line 1 at PERFORM
DO

Attention - SECURITY

Tracer prints content of variables or function arguments. For security definer function, this content can hold security sensitive data. This is reason why tracer is disabled by default and should be enabled only with super user rights plpgsql_check.enable_tracer.

Pragma

You can configure plpgsql_check behave inside checked function with "pragma" function. This is a analogy of PL/SQL or ADA language of PRAGMA feature. PLpgSQL doesn't support PRAGMA, but plpgsql_check detects function named plpgsql_check_pragma and get options from parameters of this function. These plpgsql_check options are valid to end of group of statements.

CREATE OR REPLACE FUNCTION test()
RETURNS void AS $$
BEGIN
  ...
  -- for following statements disable check
  PERFORM plpgsql_check_pragma('disable:check');
  ...
  -- enable check again
  PERFORM plpgsql_check_pragma('enable:check');
  ...
END;
$$ LANGUAGE plpgsql;

The function plpgsql_check_pragma is immutable function that returns one. It is defined by plpgsql_check extension. You can declare alternative plpgsql_check_pragma function like:

CREATE OR REPLACE FUNCTION plpgsql_check_pragma(VARIADIC args[])
RETURNS int AS $$
SELECT 1
$$ LANGUAGE sql IMMUTABLE;

Using pragma function in declaration part of top block sets options on function level too.

CREATE OR REPLACE FUNCTION test()
RETURNS void AS $$
DECLARE
  aux int := plpgsql_check_pragma('disable:extra_warnings');
  ...

Shorter syntax for pragma is supported too:

CREATE OR REPLACE FUNCTION test()
RETURNS void AS $$
DECLARE r record;
BEGIN
  PERFORM 'PRAGMA:TYPE:r (a int, b int)';
  PERFORM 'PRAGMA:TABLE: x (like pg_class)';
  ...

Supported pragmas

echo:str - print string (for testing)

status:check,status:tracer, status:other_warnings, status:performance_warnings, status:extra_warnings,status:security_warnings

enable:check,enable:tracer, enable:other_warnings, enable:performance_warnings, enable:extra_warnings,enable:security_warnings

disable:check,disable:tracer, disable:other_warnings, disable:performance_warnings, disable:extra_warnings,disable:security_warnings

type:varname typename or type:varname (fieldname type, ...) - set type to variable of record type

table: name (column_name type, ...) or table: name (like tablename) - create ephereal table

Pragmas enable:tracer and disable:tracerare active for Postgres 12 and higher

Compilation

You need a development environment for PostgreSQL extensions:

make clean
make install

result:

[pavel@localhost plpgsql_check]$ make USE_PGXS=1 clean
rm -f plpgsql_check.so   libplpgsql_check.a  libplpgsql_check.pc
rm -f plpgsql_check.o
rm -rf results/ regression.diffs regression.out tmp_check/ log/
[pavel@localhost plpgsql_check]$ make USE_PGXS=1 all
clang -O2 -Wall -Wmissing-prototypes -Wpointer-arith -Wdeclaration-after-statement -Wendif-labels -Wmissing-format-attribute -Wformat-security -fno-strict-aliasing -fwrapv -fpic -I/usr/local/pgsql/lib/pgxs/src/makefiles/../../src/pl/plpgsql/src -I. -I./ -I/usr/local/pgsql/include/server -I/usr/local/pgsql/include/internal -D_GNU_SOURCE   -c -o plpgsql_check.o plpgsql_check.c
clang -O2 -Wall -Wmissing-prototypes -Wpointer-arith -Wdeclaration-after-statement -Wendif-labels -Wmissing-format-attribute -Wformat-security -fno-strict-aliasing -fwrapv -fpic -I/usr/local/pgsql/lib/pgxs/src/makefiles/../../src/pl/plpgsql/src -shared -o plpgsql_check.so plpgsql_check.o -L/usr/local/pgsql/lib -Wl,--as-needed -Wl,-rpath,'/usr/local/pgsql/lib',--enable-new-dtags  
[pavel@localhost plpgsql_check]$ su root
Password: *******
[root@localhost plpgsql_check]# make USE_PGXS=1 install
/usr/bin/mkdir -p '/usr/local/pgsql/lib'
/usr/bin/mkdir -p '/usr/local/pgsql/share/extension'
/usr/bin/mkdir -p '/usr/local/pgsql/share/extension'
/usr/bin/install -c -m 755  plpgsql_check.so '/usr/local/pgsql/lib/plpgsql_check.so'
/usr/bin/install -c -m 644 plpgsql_check.control '/usr/local/pgsql/share/extension/'
/usr/bin/install -c -m 644 plpgsql_check--0.9.sql '/usr/local/pgsql/share/extension/'
[root@localhost plpgsql_check]# exit
[pavel@localhost plpgsql_check]$ make USE_PGXS=1 installcheck
/usr/local/pgsql/lib/pgxs/src/makefiles/../../src/test/regress/pg_regress --inputdir=./ --psqldir='/usr/local/pgsql/bin'    --dbname=pl_regression --load-language=plpgsql --dbname=contrib_regression plpgsql_check_passive plpgsql_check_active plpgsql_check_active-9.5
(using postmaster on Unix socket, default port)
============== dropping database "contrib_regression" ==============
DROP DATABASE
============== creating database "contrib_regression" ==============
CREATE DATABASE
ALTER DATABASE
============== installing plpgsql                     ==============
CREATE LANGUAGE
============== running regression test queries        ==============
test plpgsql_check_passive    ... ok
test plpgsql_check_active     ... ok
test plpgsql_check_active-9.5 ... ok

=====================
 All 3 tests passed. 
=====================

Compilation on Ubuntu

Sometimes successful compilation can require libicu-dev package (PostgreSQL 10 and higher - when pg was compiled with ICU support)

sudo apt install libicu-dev

Compilation plpgsql_check on Windows

You can check precompiled dll libraries http://okbob.blogspot.cz/2015/02/plpgsqlcheck-is-available-for-microsoft.html

or compile by self:

  1. Download and install PostgreSQL for Win32 from http://www.enterprisedb.com
  2. Download and install Microsoft Visual C++ Express
  3. Lern tutorial http://blog.2ndquadrant.com/compiling-postgresql-extensions-visual-studio-windows
  4. Build plpgsql_check.dll
  5. Install plugin
  6. copy plpgsql_check.dll to PostgreSQL\14\lib
  7. copy plpgsql_check.control and plpgsql_check--2.1.sql to PostgreSQL\14\share\extension

Checked on

  • gcc on Linux (against all supported PostgreSQL)
  • clang 3.4 on Linux (against PostgreSQL 10)
  • for success regress tests the PostgreSQL 10 or higher is required

Compilation against PostgreSQL 10 requires libICU!

Licence

Copyright (c) Pavel Stehule (pavel.stehule@gmail.com)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Note

If you like it, send a postcard to address

Pavel Stehule
Skalice 12
256 01 Benesov u Prahy
Czech Republic

I invite any questions, comments, bug reports, patches on mail address pavel.stehule@gmail.com


Author: okbob
Source Code: https://github.com/okbob/plpgsql_check
License: View license

#postgresql 

Franz  Becker

Franz Becker

1648803600

Plpgsql Check: Extension That Allows to Check Plpgsql Source Code.

plpgsql_check

I founded this project, because I wanted to publish the code I wrote in the last two years, when I tried to write enhanced checking for PostgreSQL upstream. It was not fully successful - integration into upstream requires some larger plpgsql refactoring - probably it will not be done in next years (now is Dec 2013). But written code is fully functional and can be used in production (and it is used in production). So, I created this extension to be available for all plpgsql developers.

If you like it and if you would to join to development of this extension, register yourself to postgresql extension hacking google group.

Features

  • check fields of referenced database objects and types inside embedded SQL
  • using correct types of function parameters
  • unused variables and function argumens, unmodified OUT argumens
  • partially detection of dead code (due RETURN command)
  • detection of missing RETURN command in function
  • try to identify unwanted hidden casts, that can be performance issue like unused indexes
  • possibility to collect relations and functions used by function
  • possibility to check EXECUTE stmt agaist SQL injection vulnerability

I invite any ideas, patches, bugreports.

plpgsql_check is next generation of plpgsql_lint. It allows to check source code by explicit call plpgsql_check_function.

PostgreSQL PostgreSQL 10, 11, 12, 13 and 14 are supported.

The SQL statements inside PL/pgSQL functions are checked by validator for semantic errors. These errors can be found by plpgsql_check_function:

Active mode

postgres=# CREATE EXTENSION plpgsql_check;
LOAD
postgres=# CREATE TABLE t1(a int, b int);
CREATE TABLE

postgres=#
CREATE OR REPLACE FUNCTION public.f1()
RETURNS void
LANGUAGE plpgsql
AS $function$
DECLARE r record;
BEGIN
  FOR r IN SELECT * FROM t1
  LOOP
    RAISE NOTICE '%', r.c; -- there is bug - table t1 missing "c" column
  END LOOP;
END;
$function$;

CREATE FUNCTION

postgres=# select f1(); -- execution doesn't find a bug due to empty table t1
  f1 
 ────
   
 (1 row)

postgres=# \x
Expanded display is on.
postgres=# select * from plpgsql_check_function_tb('f1()');
─[ RECORD 1 ]───────────────────────────
functionid │ f1
lineno     │ 6
statement  │ RAISE
sqlstate   │ 42703
message    │ record "r" has no field "c"
detail     │ [null]
hint       │ [null]
level      │ error
position   │ 0
query      │ [null]

postgres=# \sf+ f1
    CREATE OR REPLACE FUNCTION public.f1()
     RETURNS void
     LANGUAGE plpgsql
1       AS $function$
2       DECLARE r record;
3       BEGIN
4         FOR r IN SELECT * FROM t1
5         LOOP
6           RAISE NOTICE '%', r.c; -- there is bug - table t1 missing "c" column
7         END LOOP;
8       END;
9       $function$

Function plpgsql_check_function() has three possible formats: text, json or xml

select * from plpgsql_check_function('f1()', fatal_errors := false);
                         plpgsql_check_function                         
------------------------------------------------------------------------
 error:42703:4:SQL statement:column "c" of relation "t1" does not exist
 Query: update t1 set c = 30
 --                   ^
 error:42P01:7:RAISE:missing FROM-clause entry for table "r"
 Query: SELECT r.c
 --            ^
 error:42601:7:RAISE:too few parameters specified for RAISE
(7 rows)

postgres=# select * from plpgsql_check_function('fx()', format:='xml');
                 plpgsql_check_function                     
────────────────────────────────────────────────────────────────
 <Function oid="16400">                                        ↵
   <Issue>                                                     ↵
     <Level>error</level>                                      ↵
     <Sqlstate>42P01</Sqlstate>                                ↵
     <Message>relation "foo111" does not exist</Message>       ↵
     <Stmt lineno="3">RETURN</Stmt>                            ↵
     <Query position="23">SELECT (select a from foo111)</Query>↵
   </Issue>                                                    ↵
  </Function>
 (1 row)

Arguments

You can set level of warnings via function's parameters:

Mandatory arguments

  • function name or function signature - these functions requires function specification. Any function in PostgreSQL can be specified by Oid or by name or by signature. When you know oid or complete function's signature, you can use a regprocedure type parameter like 'fx()'::regprocedure or 16799::regprocedure. Possible alternative is using a name only, when function's name is unique - like 'fx'. When the name is not unique or the function doesn't exists it raises a error.

Optional arguments

relid DEFAULT 0 - oid of relation assigned with trigger function. It is necessary for check of any trigger function.

fatal_errors boolean DEFAULT true - stop on first error

other_warnings boolean DEFAULT true - show warnings like different attributes number in assignmenet on left and right side, variable overlaps function's parameter, unused variables, unwanted casting, ..

extra_warnings boolean DEFAULT true - show warnings like missing RETURN, shadowed variables, dead code, never read (unused) function's parameter, unmodified variables, modified auto variables, ..

performance_warnings boolean DEFAULT false - performance related warnings like declared type with type modificator, casting, implicit casts in where clause (can be reason why index is not used), ..

security_warnings boolean DEFAULT false - security related checks like SQL injection vulnerability detection

anyelementtype regtype DEFAULT 'int' - a real type used instead anyelement type

anyenumtype regtype DEFAULT '-' - a real type used instead anyenum type

anyrangetype regtype DEFAULT 'int4range' - a real type used instead anyrange type

anycompatibletype DEFAULT 'int' - a real type used instead anycompatible type

anycompatiblerangetype DEFAULT 'int4range' - a real type used instead anycompatible range type

without_warnings DEFAULT false - disable all warnings

all_warnings DEFAULT false - enable all warnings

newtable DEFAULT NULL, oldtable DEFAULT NULL - the names of NEW or OLD transitive tables. These parameters are required when transitive tables are used.

Triggers

When you want to check any trigger, you have to enter a relation that will be used together with trigger function

CREATE TABLE bar(a int, b int);

postgres=# \sf+ foo_trg
    CREATE OR REPLACE FUNCTION public.foo_trg()
         RETURNS trigger
         LANGUAGE plpgsql
1       AS $function$
2       BEGIN
3         NEW.c := NEW.a + NEW.b;
4         RETURN NEW;
5       END;
6       $function$

Missing relation specification

postgres=# select * from plpgsql_check_function('foo_trg()');
ERROR:  missing trigger relation
HINT:  Trigger relation oid must be valid

Correct trigger checking (with specified relation)

postgres=# select * from plpgsql_check_function('foo_trg()', 'bar');
                 plpgsql_check_function                 
--------------------------------------------------------
 error:42703:3:assignment:record "new" has no field "c"
(1 row)

For triggers with transitive tables you can set a oldtable or newtable parameters:

create or replace function footab_trig_func()
returns trigger as $$
declare x int;
begin
  if false then
    -- should be ok;
    select count(*) from newtab into x; 

    -- should fail;
    select count(*) from newtab where d = 10 into x;
  end if;
  return null;
end;
$$ language plpgsql;

select * from plpgsql_check_function('footab_trig_func','footab', newtable := 'newtab');

Mass check

You can use the plpgsql_check_function for mass check functions and mass check triggers. Please, test following queries:

-- check all nontrigger plpgsql functions
SELECT p.oid, p.proname, plpgsql_check_function(p.oid)
   FROM pg_catalog.pg_namespace n
   JOIN pg_catalog.pg_proc p ON pronamespace = n.oid
   JOIN pg_catalog.pg_language l ON p.prolang = l.oid
  WHERE l.lanname = 'plpgsql' AND p.prorettype <> 2279;

or

SELECT p.proname, tgrelid::regclass, cf.*
   FROM pg_proc p
        JOIN pg_trigger t ON t.tgfoid = p.oid 
        JOIN pg_language l ON p.prolang = l.oid
        JOIN pg_namespace n ON p.pronamespace = n.oid,
        LATERAL plpgsql_check_function(p.oid, t.tgrelid) cf
  WHERE n.nspname = 'public' and l.lanname = 'plpgsql'

or

-- check all plpgsql functions (functions or trigger functions with defined triggers)
SELECT
    (pcf).functionid::regprocedure, (pcf).lineno, (pcf).statement,
    (pcf).sqlstate, (pcf).message, (pcf).detail, (pcf).hint, (pcf).level,
    (pcf)."position", (pcf).query, (pcf).context
FROM
(
    SELECT
        plpgsql_check_function_tb(pg_proc.oid, COALESCE(pg_trigger.tgrelid, 0)) AS pcf
    FROM pg_proc
    LEFT JOIN pg_trigger
        ON (pg_trigger.tgfoid = pg_proc.oid)
    WHERE
        prolang = (SELECT lang.oid FROM pg_language lang WHERE lang.lanname = 'plpgsql') AND
        pronamespace <> (SELECT nsp.oid FROM pg_namespace nsp WHERE nsp.nspname = 'pg_catalog') AND
        -- ignore unused triggers
        (pg_proc.prorettype <> (SELECT typ.oid FROM pg_type typ WHERE typ.typname = 'trigger') OR
         pg_trigger.tgfoid IS NOT NULL)
    OFFSET 0
) ss
ORDER BY (pcf).functionid::regprocedure::text, (pcf).lineno

Passive mode

Functions should be checked on start - plpgsql_check module must be loaded.

Configuration

plpgsql_check.mode = [ disabled | by_function | fresh_start | every_start ]
plpgsql_check.fatal_errors = [ yes | no ]

plpgsql_check.show_nonperformance_warnings = false
plpgsql_check.show_performance_warnings = false

Default mode is by_function, that means that the enhanced check is done only in active mode - by plpgsql_check_function. fresh_start means cold start.

You can enable passive mode by

load 'plpgsql'; -- 1.1 and higher doesn't need it
load 'plpgsql_check';
set plpgsql_check.mode = 'every_start';

SELECT fx(10); -- run functions - function is checked before runtime starts it

Limits

plpgsql_check should find almost all errors on really static code. When developer use some PLpgSQL's dynamic features like dynamic SQL or record data type, then false positives are possible. These should be rare - in well written code - and then the affected function should be redesigned or plpgsql_check should be disabled for this function.

CREATE OR REPLACE FUNCTION f1()
RETURNS void AS $$
DECLARE r record;
BEGIN
  FOR r IN EXECUTE 'SELECT * FROM t1'
  LOOP
    RAISE NOTICE '%', r.c;
  END LOOP;
END;
$$ LANGUAGE plpgsql SET plpgsql.enable_check TO false;

A usage of plpgsql_check adds a small overhead (in enabled passive mode) and you should use it only in develop or preprod environments.

Dynamic SQL

This module doesn't check queries that are assembled in runtime. It is not possible to identify results of dynamic queries - so plpgsql_check cannot to set correct type to record variables and cannot to check a dependent SQLs and expressions.

When type of record's variable is not know, you can assign it explicitly with pragma type:

DECLARE r record;
BEGIN
  EXECUTE format('SELECT * FROM %I', _tablename) INTO r;
  PERFORM plpgsql_check_pragma('type: r (id int, processed bool)');
  IF NOT r.processed THEN
    ...

Attention: The SQL injection check can detect only some SQL injection vulnerabilities. This tool cannot be used for security audit! Some issues should not be detected. This check can raise false alarms too - probably when variable is sanitized by other command or when value is of some compose type. 

Refcursors

plpgsql_check should not to detect structure of referenced cursors. A reference on cursor in PLpgSQL is implemented as name of global cursor. In check time, the name is not known (not in all possibilities), and global cursor doesn't exist. It is significant break for any static analyse. PLpgSQL cannot to set correct type for record variables and cannot to check a dependent SQLs and expressions. A solution is same like dynamic SQL. Don't use record variable as target when you use refcursor type or disable plpgsql_check for these functions.

CREATE OR REPLACE FUNCTION foo(refcur_var refcursor)
RETURNS void AS $$
DECLARE
  rec_var record;
BEGIN
  FETCH refcur_var INTO rec_var; -- this is STOP for plpgsql_check
  RAISE NOTICE '%', rec_var;     -- record rec_var is not assigned yet error

In this case a record type should not be used (use known rowtype instead):

CREATE OR REPLACE FUNCTION foo(refcur_var refcursor)
RETURNS void AS $$
DECLARE
  rec_var some_rowtype;
BEGIN
  FETCH refcur_var INTO rec_var;
  RAISE NOTICE '%', rec_var;

Temporary tables

plpgsql_check cannot verify queries over temporary tables that are created in plpgsql's function runtime. For this use case it is necessary to create a fake temp table or disable plpgsql_check for this function.

In reality temp tables are stored in own (per user) schema with higher priority than persistent tables. So you can do (with following trick safetly):

CREATE OR REPLACE FUNCTION public.disable_dml()
RETURNS trigger
LANGUAGE plpgsql AS $function$
BEGIN
  RAISE EXCEPTION SQLSTATE '42P01'
     USING message = format('this instance of %I table doesn''t allow any DML operation', TG_TABLE_NAME),
           hint = format('you should to run "CREATE TEMP TABLE %1$I(LIKE %1$I INCLUDING ALL);" statement',
                         TG_TABLE_NAME);
  RETURN NULL;
END;
$function$;

CREATE TABLE foo(a int, b int); -- doesn't hold data ever
CREATE TRIGGER foo_disable_dml
   BEFORE INSERT OR UPDATE OR DELETE ON foo
   EXECUTE PROCEDURE disable_dml();

postgres=# INSERT INTO  foo VALUES(10,20);
ERROR:  this instance of foo table doesn't allow any DML operation
HINT:  you should to run "CREATE TEMP TABLE foo(LIKE foo INCLUDING ALL);" statement
postgres=# 

CREATE TABLE
postgres=# INSERT INTO  foo VALUES(10,20);
INSERT 0 1

This trick emulates GLOBAL TEMP tables partially and it allows a statical validation. Other possibility is using a [template foreign data wrapper] (https://github.com/okbob/template_fdw)

You can use pragma table and create ephemeral table:

BEGIN
   CREATE TEMP TABLE xxx(a int);
   PERFORM plpgsql_check_pragma('table: xxx(a int)');
   INSERT INTO xxx VALUES(10);

Dependency list

A function plpgsql_show_dependency_tb can show all functions, operators and relations used inside processed function:

postgres=# select * from plpgsql_show_dependency_tb('testfunc(int,float)');
┌──────────┬───────┬────────┬─────────┬────────────────────────────┐
│   type   │  oid  │ schema │  name   │           params           │
╞══════════╪═══════╪════════╪═════════╪════════════════════════════╡
│ FUNCTION │ 36008 │ public │ myfunc1 │ (integer,double precision) │
│ FUNCTION │ 35999 │ public │ myfunc2 │ (integer,double precision) │
│ OPERATOR │ 36007 │ public │ **      │ (integer,integer)          │
│ RELATION │ 36005 │ public │ myview  │                            │
│ RELATION │ 36002 │ public │ mytable │                            │
└──────────┴───────┴────────┴─────────┴────────────────────────────┘
(4 rows)

Profiler

The plpgsql_check contains simple profiler of plpgsql functions and procedures. It can work with/without a access to shared memory. It depends on shared_preload_libraries config. When plpgsql_check was initialized by shared_preload_libraries, then it can allocate shared memory, and function's profiles are stored there. When plpgsql_check cannot to allocate shared momory, the profile is stored in session memory.

Due dependencies, shared_preload_libraries should to contains plpgsql first

postgres=# show shared_preload_libraries ;
┌──────────────────────────┐
│ shared_preload_libraries │
╞══════════════════════════╡
│ plpgsql,plpgsql_check    │
└──────────────────────────┘
(1 row)

The profiler is active when GUC plpgsql_check.profiler is on. The profiler doesn't require shared memory, but if there are not shared memory, then the profile is limmitted just to active session.

When plpgsql_check is initialized by shared_preload_libraries, another GUC is available to configure the amount of shared memory used by the profiler: plpgsql_check.profiler_max_shared_chunks. This defines the maximum number of statements chunk that can be stored in shared memory. For each plpgsql function (or procedure), the whole content is split into chunks of 30 statements. If needed, multiple chunks can be used to store the whole content of a single function. A single chunk is 1704 bytes. The default value for this GUC is 15000, which should be enough for big projects containing hundred of thousands of statements in plpgsql, and will consume about 24MB of memory. If your project doesn't require that much number of chunks, you can set this parameter to a smaller number in order to decrease the memory usage. The minimum value is 50 (which should consume about 83kB of memory), and the maximum value is 100000 (which should consume about 163MB of memory). Changing this parameter requires a PostgreSQL restart.

The profiler will also retrieve the query identifier for each instruction that contains an expression or optimizable statement. Note that this requires pg_stat_statements, or another similar third-party extension), to be installed. There are some limitations to the query identifier retrieval:

  • if a plpgsql expression contains underlying statements, only the top level query identifier will be retrieved
  • the profiler doesn't compute query identifier by itself but relies on external extension, such as pg_stat_statements, for that. It means that depending on the external extension behavior, you may not be able to see a query identifier for some statements. That's for instance the case with DDL statements, as pg_stat_statements doesn't expose the query identifier for such queries.
  • a query identifier is retrieved only for instructions containing expressions. This means that plpgsql_profiler_function_tb() function can report less query identifier than instructions on a single line.

Attention: A update of shared profiles can decrease performance on servers under higher load.

The profile can be displayed by function plpgsql_profiler_function_tb:

postgres=# select lineno, avg_time, source from plpgsql_profiler_function_tb('fx(int)');
┌────────┬──────────┬───────────────────────────────────────────────────────────────────┐
│ lineno │ avg_time │                              source                               │
╞════════╪══════════╪═══════════════════════════════════════════════════════════════════╡
│      1 │          │                                                                   │
│      2 │          │ declare result int = 0;                                           │
│      3 │    0.075 │ begin                                                             │
│      4 │    0.202 │   for i in 1..$1 loop                                             │
│      5 │    0.005 │     select result + i into result; select result + i into result; │
│      6 │          │   end loop;                                                       │
│      7 │        0 │   return result;                                                  │
│      8 │          │ end;                                                              │
└────────┴──────────┴───────────────────────────────────────────────────────────────────┘
(9 rows)

The profile per statements (not per line) can be displayed by function plpgsql_profiler_function_statements_tb:

        CREATE OR REPLACE FUNCTION public.fx1(a integer)
         RETURNS integer
         LANGUAGE plpgsql
1       AS $function$
2       begin
3         if a > 10 then
4           raise notice 'ahoj';
5           return -1;
6         else
7           raise notice 'nazdar';
8           return 1;
9         end if;
10      end;
11      $function$

postgres=# select stmtid, parent_stmtid, parent_note, lineno, exec_stmts, stmtname
             from plpgsql_profiler_function_statements_tb('fx1');
┌────────┬───────────────┬─────────────┬────────┬────────────┬─────────────────┐
│ stmtid │ parent_stmtid │ parent_note │ lineno │ exec_stmts │    stmtname     │
╞════════╪═══════════════╪═════════════╪════════╪════════════╪═════════════════╡
│      0 │             ∅ │ ∅           │      2 │          0 │ statement block │
│      1 │             0 │ body        │      3 │          0 │ IF              │
│      2 │             1 │ then body   │      4 │          0 │ RAISE           │
│      3 │             1 │ then body   │      5 │          0 │ RETURN          │
│      4 │             1 │ else body   │      7 │          0 │ RAISE           │
│      5 │             1 │ else body   │      8 │          0 │ RETURN          │
└────────┴───────────────┴─────────────┴────────┴────────────┴─────────────────┘
(6 rows)

All stored profiles can be displayed by calling function plpgsql_profiler_functions_all:

postgres=# select * from plpgsql_profiler_functions_all();
┌───────────────────────┬────────────┬────────────┬──────────┬─────────────┬──────────┬──────────┐
│        funcoid        │ exec_count │ total_time │ avg_time │ stddev_time │ min_time │ max_time │
╞═══════════════════════╪════════════╪════════════╪══════════╪═════════════╪══════════╪══════════╡
│ fxx(double precision) │          1 │       0.01 │     0.01 │        0.00 │     0.01 │     0.01 │
└───────────────────────┴────────────┴────────────┴──────────┴─────────────┴──────────┴──────────┘
(1 row)

There are two functions for cleaning stored profiles: plpgsql_profiler_reset_all() and plpgsql_profiler_reset(regprocedure).

Coverage metrics

plpgsql_check provides two functions:

  • plpgsql_coverage_statements(name)
  • plpgsql_coverage_branches(name)

Note

There is another very good PLpgSQL profiler - https://bitbucket.org/openscg/plprofiler

My extension is designed to be simple for use and practical. Nothing more or less.

plprofiler is more complex. It build call graphs and from this graph it can creates flame graph of execution times.

Both extensions can be used together with buildin PostgreSQL's feature - tracking functions.

set track_functions to 'pl';
...
select * from pg_stat_user_functions;

Tracer

plpgsql_check provides a tracing possibility - in this mode you can see notices on start or end functions (terse and default verbosity) and start or end statements (verbose verbosity). For default and verbose verbosity the content of function arguments is displayed. The content of related variables are displayed when verbosity is verbose.

postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #0 ->> start of inline_code_block (Oid=0)
NOTICE:  #2   ->> start of function fx(integer,integer,date,text) (Oid=16405)
NOTICE:  #2        call by inline_code_block line 1 at PERFORM
NOTICE:  #2       "a" => '10', "b" => null, "c" => '2020-08-03', "d" => 'stěhule'
NOTICE:  #4     ->> start of function fx(integer) (Oid=16404)
NOTICE:  #4          call by fx(integer,integer,date,text) line 1 at PERFORM
NOTICE:  #4         "a" => '10'
NOTICE:  #4     <<- end of function fx (elapsed time=0.098 ms)
NOTICE:  #2   <<- end of function fx (elapsed time=0.399 ms)
NOTICE:  #0 <<- end of block (elapsed time=0.754 ms)

The number after # is a execution frame counter (this number is related to deep of error context stack). It allows to pair start end and of function.

Tracing is enabled by setting plpgsql_check.tracer to on. Attention - enabling this behaviour has significant negative impact on performance (unlike the profiler). You can set a level for output used by tracer plpgsql_check.tracer_errlevel (default is notice). The output content is limited by length specified by plpgsql_check.tracer_variable_max_length configuration variable.

In terse verbose mode the output is reduced:

postgres=# set plpgsql_check.tracer_verbosity TO terse;
SET
postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #0 start of inline code block (oid=0)
NOTICE:  #2 start of fx (oid=16405)
NOTICE:  #4 start of fx (oid=16404)
NOTICE:  #4 end of fx
NOTICE:  #2 end of fx
NOTICE:  #0 end of inline code block

In verbose mode the output is extended about statement details:

postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #0            ->> start of block inline_code_block (oid=0)
NOTICE:  #0.1       1  --> start of PERFORM
NOTICE:  #2              ->> start of function fx(integer,integer,date,text) (oid=16405)
NOTICE:  #2                   call by inline_code_block line 1 at PERFORM
NOTICE:  #2                  "a" => '10', "b" => null, "c" => '2020-08-04', "d" => 'stěhule'
NOTICE:  #2.1       1    --> start of PERFORM
NOTICE:  #2.1                "a" => '10'
NOTICE:  #4                ->> start of function fx(integer) (oid=16404)
NOTICE:  #4                     call by fx(integer,integer,date,text) line 1 at PERFORM
NOTICE:  #4                    "a" => '10'
NOTICE:  #4.1       6      --> start of assignment
NOTICE:  #4.1                  "a" => '10', "b" => '20'
NOTICE:  #4.1              <-- end of assignment (elapsed time=0.076 ms)
NOTICE:  #4.1                  "res" => '130'
NOTICE:  #4.2       7      --> start of RETURN
NOTICE:  #4.2                  "res" => '130'
NOTICE:  #4.2              <-- end of RETURN (elapsed time=0.054 ms)
NOTICE:  #4                <<- end of function fx (elapsed time=0.373 ms)
NOTICE:  #2.1            <-- end of PERFORM (elapsed time=0.589 ms)
NOTICE:  #2              <<- end of function fx (elapsed time=0.727 ms)
NOTICE:  #0.1          <-- end of PERFORM (elapsed time=1.147 ms)
NOTICE:  #0            <<- end of block (elapsed time=1.286 ms)

Special feature of tracer is tracing of ASSERT statement when plpgsql_check.trace_assert is on. When plpgsql_check.trace_assert_verbosity is DEFAULT, then all function's or procedure's variables are displayed when assert expression is false. When this configuration is VERBOSE then all variables from all plpgsql frames are displayed. This behaviour is independent on plpgsql.check_asserts value. It can be used, although the assertions are disabled in plpgsql runtime.

postgres=# set plpgsql_check.tracer to off;
postgres=# set plpgsql_check.trace_assert_verbosity TO verbose;

postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #4 PLpgSQL assert expression (false) on line 12 of fx(integer) is false
NOTICE:   "a" => '10', "res" => null, "b" => '20'
NOTICE:  #2 PL/pgSQL function fx(integer,integer,date,text) line 1 at PERFORM
NOTICE:   "a" => '10', "b" => null, "c" => '2020-08-05', "d" => 'stěhule'
NOTICE:  #0 PL/pgSQL function inline_code_block line 1 at PERFORM
ERROR:  assertion failed
CONTEXT:  PL/pgSQL function fx(integer) line 12 at ASSERT
SQL statement "SELECT fx(a)"
PL/pgSQL function fx(integer,integer,date,text) line 1 at PERFORM
SQL statement "SELECT fx(10,null, 'now', e'stěhule')"
PL/pgSQL function inline_code_block line 1 at PERFORM

postgres=# set plpgsql.check_asserts to off;
SET
postgres=# do $$ begin perform fx(10,null, 'now', e'stěhule'); end; $$;
NOTICE:  #4 PLpgSQL assert expression (false) on line 12 of fx(integer) is false
NOTICE:   "a" => '10', "res" => null, "b" => '20'
NOTICE:  #2 PL/pgSQL function fx(integer,integer,date,text) line 1 at PERFORM
NOTICE:   "a" => '10', "b" => null, "c" => '2020-08-05', "d" => 'stěhule'
NOTICE:  #0 PL/pgSQL function inline_code_block line 1 at PERFORM
DO

Attention - SECURITY

Tracer prints content of variables or function arguments. For security definer function, this content can hold security sensitive data. This is reason why tracer is disabled by default and should be enabled only with super user rights plpgsql_check.enable_tracer.

Pragma

You can configure plpgsql_check behave inside checked function with "pragma" function. This is a analogy of PL/SQL or ADA language of PRAGMA feature. PLpgSQL doesn't support PRAGMA, but plpgsql_check detects function named plpgsql_check_pragma and get options from parameters of this function. These plpgsql_check options are valid to end of group of statements.

CREATE OR REPLACE FUNCTION test()
RETURNS void AS $$
BEGIN
  ...
  -- for following statements disable check
  PERFORM plpgsql_check_pragma('disable:check');
  ...
  -- enable check again
  PERFORM plpgsql_check_pragma('enable:check');
  ...
END;
$$ LANGUAGE plpgsql;

The function plpgsql_check_pragma is immutable function that returns one. It is defined by plpgsql_check extension. You can declare alternative plpgsql_check_pragma function like:

CREATE OR REPLACE FUNCTION plpgsql_check_pragma(VARIADIC args[])
RETURNS int AS $$
SELECT 1
$$ LANGUAGE sql IMMUTABLE;

Using pragma function in declaration part of top block sets options on function level too.

CREATE OR REPLACE FUNCTION test()
RETURNS void AS $$
DECLARE
  aux int := plpgsql_check_pragma('disable:extra_warnings');
  ...

Shorter syntax for pragma is supported too:

CREATE OR REPLACE FUNCTION test()
RETURNS void AS $$
DECLARE r record;
BEGIN
  PERFORM 'PRAGMA:TYPE:r (a int, b int)';
  PERFORM 'PRAGMA:TABLE: x (like pg_class)';
  ...

Supported pragmas

echo:str - print string (for testing)

status:check,status:tracer, status:other_warnings, status:performance_warnings, status:extra_warnings,status:security_warnings

enable:check,enable:tracer, enable:other_warnings, enable:performance_warnings, enable:extra_warnings,enable:security_warnings

disable:check,disable:tracer, disable:other_warnings, disable:performance_warnings, disable:extra_warnings,disable:security_warnings

type:varname typename or type:varname (fieldname type, ...) - set type to variable of record type

table: name (column_name type, ...) or table: name (like tablename) - create ephereal table

Pragmas enable:tracer and disable:tracerare active for Postgres 12 and higher

Compilation

You need a development environment for PostgreSQL extensions:

make clean
make install

result:

[pavel@localhost plpgsql_check]$ make USE_PGXS=1 clean
rm -f plpgsql_check.so   libplpgsql_check.a  libplpgsql_check.pc
rm -f plpgsql_check.o
rm -rf results/ regression.diffs regression.out tmp_check/ log/
[pavel@localhost plpgsql_check]$ make USE_PGXS=1 all
clang -O2 -Wall -Wmissing-prototypes -Wpointer-arith -Wdeclaration-after-statement -Wendif-labels -Wmissing-format-attribute -Wformat-security -fno-strict-aliasing -fwrapv -fpic -I/usr/local/pgsql/lib/pgxs/src/makefiles/../../src/pl/plpgsql/src -I. -I./ -I/usr/local/pgsql/include/server -I/usr/local/pgsql/include/internal -D_GNU_SOURCE   -c -o plpgsql_check.o plpgsql_check.c
clang -O2 -Wall -Wmissing-prototypes -Wpointer-arith -Wdeclaration-after-statement -Wendif-labels -Wmissing-format-attribute -Wformat-security -fno-strict-aliasing -fwrapv -fpic -I/usr/local/pgsql/lib/pgxs/src/makefiles/../../src/pl/plpgsql/src -shared -o plpgsql_check.so plpgsql_check.o -L/usr/local/pgsql/lib -Wl,--as-needed -Wl,-rpath,'/usr/local/pgsql/lib',--enable-new-dtags  
[pavel@localhost plpgsql_check]$ su root
Password: *******
[root@localhost plpgsql_check]# make USE_PGXS=1 install
/usr/bin/mkdir -p '/usr/local/pgsql/lib'
/usr/bin/mkdir -p '/usr/local/pgsql/share/extension'
/usr/bin/mkdir -p '/usr/local/pgsql/share/extension'
/usr/bin/install -c -m 755  plpgsql_check.so '/usr/local/pgsql/lib/plpgsql_check.so'
/usr/bin/install -c -m 644 plpgsql_check.control '/usr/local/pgsql/share/extension/'
/usr/bin/install -c -m 644 plpgsql_check--0.9.sql '/usr/local/pgsql/share/extension/'
[root@localhost plpgsql_check]# exit
[pavel@localhost plpgsql_check]$ make USE_PGXS=1 installcheck
/usr/local/pgsql/lib/pgxs/src/makefiles/../../src/test/regress/pg_regress --inputdir=./ --psqldir='/usr/local/pgsql/bin'    --dbname=pl_regression --load-language=plpgsql --dbname=contrib_regression plpgsql_check_passive plpgsql_check_active plpgsql_check_active-9.5
(using postmaster on Unix socket, default port)
============== dropping database "contrib_regression" ==============
DROP DATABASE
============== creating database "contrib_regression" ==============
CREATE DATABASE
ALTER DATABASE
============== installing plpgsql                     ==============
CREATE LANGUAGE
============== running regression test queries        ==============
test plpgsql_check_passive    ... ok
test plpgsql_check_active     ... ok
test plpgsql_check_active-9.5 ... ok

=====================
 All 3 tests passed. 
=====================

Compilation on Ubuntu

Sometimes successful compilation can require libicu-dev package (PostgreSQL 10 and higher - when pg was compiled with ICU support)

sudo apt install libicu-dev

Compilation plpgsql_check on Windows

You can check precompiled dll libraries http://okbob.blogspot.cz/2015/02/plpgsqlcheck-is-available-for-microsoft.html

or compile by self:

  1. Download and install PostgreSQL for Win32 from http://www.enterprisedb.com
  2. Download and install Microsoft Visual C++ Express
  3. Lern tutorial http://blog.2ndquadrant.com/compiling-postgresql-extensions-visual-studio-windows
  4. Build plpgsql_check.dll
  5. Install plugin
  6. copy plpgsql_check.dll to PostgreSQL\14\lib
  7. copy plpgsql_check.control and plpgsql_check--2.1.sql to PostgreSQL\14\share\extension

Checked on

  • gcc on Linux (against all supported PostgreSQL)
  • clang 3.4 on Linux (against PostgreSQL 10)
  • for success regress tests the PostgreSQL 10 or higher is required

Compilation against PostgreSQL 10 requires libICU!

Licence

Copyright (c) Pavel Stehule (pavel.stehule@gmail.com)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Note

If you like it, send a postcard to address

Pavel Stehule
Skalice 12
256 01 Benesov u Prahy
Czech Republic

I invite any questions, comments, bug reports, patches on mail address pavel.stehule@gmail.com


Author: okbob
Source Code: https://github.com/okbob/plpgsql_check
License: View license

#postgresql 

Linda Osborn

1624527764

Cash App Transfer Failed, Add Cash, My Protection Issue In 2020

Cash App is a money transfer application that allows users to send or receive money online. Many users prefer the Cash App for payment transfers. It’s the most widely used program for peer-to-peer payment transport. However, users experienced issues of - Cash App transfer failed. It turned into a significant problem as users attempted to solve the errors. Errors were because there were many cases when Cash App servers were down.

Suppose you confront mistakes associated with payment failed on Cash App. If that’s the circumstance, we strongly advise you to read the comprehensive blog; after this, you can fix the payment failed issue on Cash App.

Why the Cash App transfer failed?
We have attempted to describe some of the most typical reasons behind why cash app payment failed for my protection. Following are some of the most frequent reasons a user confronts while transferring payments and which lead this transfer failed on the Cash App:

  • Internet speed and wifi: To utilize Cash App, you need a strong online connection; it will not permit you to make transactions on low –net speed. Therefore, you must always make sure that your web is up and running while creating a Cash App transaction.
  • Square Cash application in your device: There is a chance your cash app transactions are becoming failed since you overlook upgrading your application with a significant upgrade. Check the application version in your device app store because it’s mandated to upgrade the application with the newest updates provided by Cash App.
  • Cash App account verification: Most of the time many of the non-verified users on Cash App confronted the issue of “Cash App this transfer failed.” Hence you should keep you account verified and update the credentials such as complete name, date of birth, address, and social security number.
  • Check Recipient ID and $Cashtag: Always assess the recipient ID correctly before beginning the transaction. Since the Cash App demands the particular user’s precise details, the recipient ID will help identify and bridge the two consumers’ transactions.

Also Read: Cash App Direct Deposit Unemployment || Cash App Tax Refund

How to issue a transfer failed on the Cash App?
Follow a number of the necessary actions that you need to take to fix the payment failed on the Cash App:

  • You should always check whether your Cash App card is working properly because there are many instances when cards expire and are still linked to accounts.
  • Moreover when you transfer money from Cash App make sure to check the account’s balance; it will show on the home display at the very top center of the Cash App on a mobile device.
  • Make sure you enter the right information. If the amount transfers to the wrong address, it would not be possible to obtain the money back.
  • Verify your Cash App account. Verification is critical to continue enjoying the services uninterruptedly.
  • Always make sure there is enough balance on your Cash App.
  • If the user has connected the device to wifi, it must remain 300 feet from the wifi router to get the internet signals.
  • Regularly check for Cash App updates in the app store of your device.
  • Reinstall the program if any problem continues.
  • Assess the time and date; when it’s wrong, try to update your device.
  • Assess for cellular wifi or network link; the device should get an uninterrupted net.

Also Read: Cash App Refund || Cash App Direct Deposit

Cash App failed for my protection- What does it mean? 
Cash App transfer failed in your safety way that the transaction you are attempting to make went unsuccessful. It is probably any sort of transfer consisting of bank transfer, online or offline payment, cash withdrawal at ATM and sending or receiving money to and from contacts. And because the call indicates of this Cash App error, there should were any kind of security related problem because of which your Cash App transfer has failed. Let’s recover from it in detail in the following section.

Why would Cash App cancel a payment for my protection? 
Let’s now no longer neglect about that Cash App is an authorized payment app. Above all, its miles a consumer orientated company. The main cause for Cash App being famous in only a quick time frame lies in its protection features and method to save you the frauds and scam on its platform. Keeping in thoughts the developing threats to cyber security, Cash App has designed its server in a way that it runs all of the time in the historical past in regular search of any suspicious interest. As quickly as any slightest of moderate dubious activity is caught, Cash App’s protective device comes into action and prevents the Cash App payment from going successful.

However, in line with the Cash App experts, once in a while Cash App customers make a few stupid mistakes without understanding that their mistake makes them appear as a suspicious Cash App user. Which further would possibly result in Cash App transfer failure? Scroll right all the way down to discover greater facts about how to fix Cash App transfer failed for your protection.

How do I fix my Cash App payment failed for my protection

  • Let’s now no longer overlook that Cash App is a digital payment app. And every digital service works on the net. In the absence of uninterrupted net service, your Cash App transfers are much more likely to be failed. So, ensure that your smart phone is getting seamless net signals.
  • It is right in case you use Cash App a lot in regular life. But, in case you are doing so without confirming your identity then it is bad. Reportedly, most of the transactions which might be failed on Cash App done by those people who are unverified Cash App customers due to the fact they usually seem like suspicious until they verify their identity on Cash App. So, take a minute to verify your identity on Cash App. It is simple.
  • You are probably aware about VPN. Most probably, you also realize the blessings of the usage of a VPN. But, what a less known fact is that VPN comes with its very own disadvantages. Especially, while its miles used on a payment app. The same is proper with Cash App. A use of VPN with Cash App is probably a matter of real trouble because it hides the location causing Cash App to consider you will do something wrong. That’s why, thoughts to disable VPN even as sending or receiving money through Cash App.*

Also Know: Activate Cash App Card || Cash App Login

Other ways to fix Cash App Transfer failed 
If you suspect there’s not anything suspicious about your Cash App payment but still you can’t send or receive money the use of Cash App then the probabilities are high that you’re violating the Cash App limits. Yes, Cash App comes with a few limits. Anyone who’s a validated Cash App user can ship up to $7500 in a week. Any Cash App transaction or charge main to pass the Cash App restrict will definitely fail. So, make sure that your Cash App account is under the most permissible limit.

Lastly, but most importantly, Cash App mobile app is problem to regular development. For hassle-free experience, you have to hold updating your Cash App utility. Doing so, you can easily keep away from such a lot of errors along with the Cash App transfer failed for my protection.

FAQ’S

Q. Why is my transfer failing on the Cash App?
If your transfer fails on a Cash App, it could be due to so many different reasons; you must have made a mistake while transferring money due to which the transfer failed. The most common mistake users make while sending money from Cash App is using a low-speed internet connection, not updating the application and entering incorrect details.

Q. How do I fix transfer failure on the Cash App?
To fix the transfer failed on Cash App, you need to check whether the internet-connected to your device is working or not. And make sure that you have updated the cash app on your mobile phone. Moreover, always re-check the details such as the amount of money, $Cashtag while transferring money.

Q. What happens when a cash app payment fails?
If the Cash App payment failed, the user has not received the money you were trying to send. The payment failed issue on Cash App takes place due to so many different reasons.

Q. Why does the Cash app keep declining my payment?
Cash App keeps declining your payment if you have not verified your Cash App account, and your bank is not responding to the Cash App server; hence, the payment is declined by the Cash App. Moreover, if there is any internet or wifi connection errors, transactions are declined by the Cash App.

Q. Why does a Cash App get failed for my protection?
If there is any suspicious activity or fraudulent transactions on your Cash App account, then Cash App cancels this payment for your protection. Therefore, this Cash App payment fails your protection to save you from being overcharged and avoid unnecessary scams.

Bottom Lines:-

Cash app transfer failed | Cash app transfer failed 2021 | transfer failed cash app | cash app this transfer failed | this transfer failed cash app | cash app failed | cash app transaction failed | cash app payment failed for my protection | cash app transfer failed add cash | trying to add cash to cash app transfer failed | cash app failed to send | cash app keeps saying transfer failed | cash app failed to add money | my cash app says transfer failed | cash app sending money failed | cash app money failed | cash app payment failed | cash app payment failed 2021 | cash app transfer declined | cash app transfer pending | cash app transfer declined by bank | cash app transfer failed by bank

#cash app transfer failed #cash app payment failed #cash app payment failed for my protection #cash app transfer declined by bank #cash app transfer declined #cash app transfer pending