Perceptron Explained Using Python Example - Data Analytics

In this post, you will learn about **Perceptrons **with the help of a Pythonexample.It is very important for data scientists to understand the concepts related to Perceptron as a good understanding lays the foundation of learning advanced concepts of neural networks including deep neural networks (deep learning).

What Is a Perceptron?

Perceptron is a machine learning algorithm which mimics how a neuron in the brain works. It is also called as single layer neural network, as the output is decided based on the outcome of just one activation function which represents a neuron.

Let’s first understand how a neuron works. The diagram below represents a neuron in the brain. The input signals (x1, x2, …) of different strength (observe weights, w1, w2 …) is fed into the neuron cell via dendrites. The net input (weighted sum) is processed by the neuron and output signal (observer signal in AXON) is appropriately fired. In case the combined signal strength is not appropriate based on decision function within neuron cell (observe activation function), the neuron does not fire any output signal.

Fig 1. Neuron in Human Brain

#python #ai #deep learning #neural network #perceptron #data-science

What is GEEK

Buddha Community

Perceptron Explained Using Python Example - Data Analytics

Lawrence Lesch

1677668905

TS-mockito: Mocking Library for TypeScript

TS-mockito

Mocking library for TypeScript inspired by http://mockito.org/

1.x to 2.x migration guide

Main features

Strongly typed
IDE autocomplete
Mock creation (mock) (also abstract classes) #example
Spying on real objects (spy) #example
Changing mock behavior (when) via:
- thenReturn - return value #example
- thenThrow - throw an error #example
- thenCall - call custom method #example
- thenResolve - resolve promise #example
- thenReject - rejects promise #example
Checking if methods were called with given arguments (verify)
- anything, notNull, anyString, anyOfClass etc. - for more flexible comparision
- once, twice, times, atLeast etc. - allows call count verification #example
- calledBefore, calledAfter - allows call order verification #example
Resetting mock (reset, resetCalls) #example, #example
Capturing arguments passed to method (capture) #example
Recording multiple behaviors #example
Readable error messages (ex. 'Expected "convertNumberToString(strictEqual(3))" to be called 2 time(s). But has been called 1 time(s).')

Installation

npm install ts-mockito --save-dev

Usage

Basics

// Creating mock
let mockedFoo:Foo = mock(Foo);

// Getting instance from mock
let foo:Foo = instance(mockedFoo);

// Using instance in source code
foo.getBar(3);
foo.getBar(5);

// Explicit, readable verification
verify(mockedFoo.getBar(3)).called();
verify(mockedFoo.getBar(anything())).called();

Stubbing method calls

// Creating mock
let mockedFoo:Foo = mock(Foo);

// stub method before execution
when(mockedFoo.getBar(3)).thenReturn('three');

// Getting instance
let foo:Foo = instance(mockedFoo);

// prints three
console.log(foo.getBar(3));

// prints null, because "getBar(999)" was not stubbed
console.log(foo.getBar(999));

Stubbing getter value

// Creating mock
let mockedFoo:Foo = mock(Foo);

// stub getter before execution
when(mockedFoo.sampleGetter).thenReturn('three');

// Getting instance
let foo:Foo = instance(mockedFoo);

// prints three
console.log(foo.sampleGetter);

Stubbing property values that have no getters

Syntax is the same as with getter values.

Please note, that stubbing properties that don't have getters only works if Proxy object is available (ES6).

Call count verification

// Creating mock
let mockedFoo:Foo = mock(Foo);

// Getting instance
let foo:Foo = instance(mockedFoo);

// Some calls
foo.getBar(1);
foo.getBar(2);
foo.getBar(2);
foo.getBar(3);

// Call count verification
verify(mockedFoo.getBar(1)).once();               // was called with arg === 1 only once
verify(mockedFoo.getBar(2)).twice();              // was called with arg === 2 exactly two times
verify(mockedFoo.getBar(between(2, 3))).thrice(); // was called with arg between 2-3 exactly three times
verify(mockedFoo.getBar(anyNumber()).times(4);    // was called with any number arg exactly four times
verify(mockedFoo.getBar(2)).atLeast(2);           // was called with arg === 2 min two times
verify(mockedFoo.getBar(anything())).atMost(4);   // was called with any argument max four times
verify(mockedFoo.getBar(4)).never();              // was never called with arg === 4

Call order verification

// Creating mock
let mockedFoo:Foo = mock(Foo);
let mockedBar:Bar = mock(Bar);

// Getting instance
let foo:Foo = instance(mockedFoo);
let bar:Bar = instance(mockedBar);

// Some calls
foo.getBar(1);
bar.getFoo(2);

// Call order verification
verify(mockedFoo.getBar(1)).calledBefore(mockedBar.getFoo(2));    // foo.getBar(1) has been called before bar.getFoo(2)
verify(mockedBar.getFoo(2)).calledAfter(mockedFoo.getBar(1));    // bar.getFoo(2) has been called before foo.getBar(1)
verify(mockedFoo.getBar(1)).calledBefore(mockedBar.getFoo(999999));    // throws error (mockedBar.getFoo(999999) has never been called)

Throwing errors

let mockedFoo:Foo = mock(Foo);

when(mockedFoo.getBar(10)).thenThrow(new Error('fatal error'));

let foo:Foo = instance(mockedFoo);
try {
    foo.getBar(10);
} catch (error:Error) {
    console.log(error.message); // 'fatal error'
}

Custom function

You can also stub method with your own implementation

let mockedFoo:Foo = mock(Foo);
let foo:Foo = instance(mockedFoo);

when(mockedFoo.sumTwoNumbers(anyNumber(), anyNumber())).thenCall((arg1:number, arg2:number) => {
    return arg1 * arg2; 
});

// prints '50' because we've changed sum method implementation to multiply!
console.log(foo.sumTwoNumbers(5, 10));

Resolving / rejecting promises

You can also stub method to resolve / reject promise

let mockedFoo:Foo = mock(Foo);

when(mockedFoo.fetchData("a")).thenResolve({id: "a", value: "Hello world"});
when(mockedFoo.fetchData("b")).thenReject(new Error("b does not exist"));

Resetting mock calls

You can reset just mock call counter

// Creating mock
let mockedFoo:Foo = mock(Foo);

// Getting instance
let foo:Foo = instance(mockedFoo);

// Some calls
foo.getBar(1);
foo.getBar(1);
verify(mockedFoo.getBar(1)).twice();      // getBar with arg "1" has been called twice

// Reset mock
resetCalls(mockedFoo);

// Call count verification
verify(mockedFoo.getBar(1)).never();      // has never been called after reset

You can also reset calls of multiple mocks at once resetCalls(firstMock, secondMock, thirdMock)

Resetting mock

Or reset mock call counter with all stubs

// Creating mock
let mockedFoo:Foo = mock(Foo);
when(mockedFoo.getBar(1)).thenReturn("one").

// Getting instance
let foo:Foo = instance(mockedFoo);

// Some calls
console.log(foo.getBar(1));               // "one" - as defined in stub
console.log(foo.getBar(1));               // "one" - as defined in stub
verify(mockedFoo.getBar(1)).twice();      // getBar with arg "1" has been called twice

// Reset mock
reset(mockedFoo);

// Call count verification
verify(mockedFoo.getBar(1)).never();      // has never been called after reset
console.log(foo.getBar(1));               // null - previously added stub has been removed

You can also reset multiple mocks at once reset(firstMock, secondMock, thirdMock)

Capturing method arguments

let mockedFoo:Foo = mock(Foo);
let foo:Foo = instance(mockedFoo);

// Call method
foo.sumTwoNumbers(1, 2);

// Check first arg captor values
const [firstArg, secondArg] = capture(mockedFoo.sumTwoNumbers).last();
console.log(firstArg);    // prints 1
console.log(secondArg);    // prints 2

You can also get other calls using first(), second(), byCallIndex(3) and more...

Recording multiple behaviors

You can set multiple returning values for same matching values

const mockedFoo:Foo = mock(Foo);

when(mockedFoo.getBar(anyNumber())).thenReturn('one').thenReturn('two').thenReturn('three');

const foo:Foo = instance(mockedFoo);

console.log(foo.getBar(1));    // one
console.log(foo.getBar(1));    // two
console.log(foo.getBar(1));    // three
console.log(foo.getBar(1));    // three - last defined behavior will be repeated infinitely

Another example with specific values

let mockedFoo:Foo = mock(Foo);

when(mockedFoo.getBar(1)).thenReturn('one').thenReturn('another one');
when(mockedFoo.getBar(2)).thenReturn('two');

let foo:Foo = instance(mockedFoo);

console.log(foo.getBar(1));    // one
console.log(foo.getBar(2));    // two
console.log(foo.getBar(1));    // another one
console.log(foo.getBar(1));    // another one - this is last defined behavior for arg '1' so it will be repeated
console.log(foo.getBar(2));    // two
console.log(foo.getBar(2));    // two - this is last defined behavior for arg '2' so it will be repeated

Short notation:

const mockedFoo:Foo = mock(Foo);

// You can specify return values as multiple thenReturn args
when(mockedFoo.getBar(anyNumber())).thenReturn('one', 'two', 'three');

const foo:Foo = instance(mockedFoo);

console.log(foo.getBar(1));    // one
console.log(foo.getBar(1));    // two
console.log(foo.getBar(1));    // three
console.log(foo.getBar(1));    // three - last defined behavior will be repeated infinity

Possible errors:

const mockedFoo:Foo = mock(Foo);

// When multiple matchers, matches same result:
when(mockedFoo.getBar(anyNumber())).thenReturn('one');
when(mockedFoo.getBar(3)).thenReturn('one');

const foo:Foo = instance(mockedFoo);
foo.getBar(3); // MultipleMatchersMatchSameStubError will be thrown, two matchers match same method call

Mocking interfaces

You can mock interfaces too, just instead of passing type to mock function, set mock function generic type Mocking interfaces requires Proxy implementation

let mockedFoo:Foo = mock<FooInterface>(); // instead of mock(FooInterface)
const foo: SampleGeneric<FooInterface> = instance(mockedFoo);

Mocking types

You can mock abstract classes

const mockedFoo: SampleAbstractClass = mock(SampleAbstractClass);
const foo: SampleAbstractClass = instance(mockedFoo);

You can also mock generic classes, but note that generic type is just needed by mock type definition

const mockedFoo: SampleGeneric<SampleInterface> = mock(SampleGeneric);
const foo: SampleGeneric<SampleInterface> = instance(mockedFoo);

Spying on real objects

You can partially mock an existing instance:

const foo: Foo = new Foo();
const spiedFoo = spy(foo);

when(spiedFoo.getBar(3)).thenReturn('one');

console.log(foo.getBar(3)); // 'one'
console.log(foo.getBaz()); // call to a real method

You can spy on plain objects too:

const foo = { bar: () => 42 };
const spiedFoo = spy(foo);

foo.bar();

console.log(capture(spiedFoo.bar).last()); // [42]

Thanks

Szczepan Faber (https://www.linkedin.com/in/szczepiq)
Sebastian Konkol (https://www.linkedin.com/in/sebastiankonkol)
Clickmeeting (http://clickmeeting.com)
Michał Stocki (https://github.com/michalstocki)
Łukasz Bendykowski (https://github.com/viman)
Andrey Ermakov (https://github.com/dreef3)
Markus Ende (https://github.com/Markus-Ende)
Thomas Hilzendegen (https://github.com/thomashilzendegen)
Johan Blumenberg (https://github.com/johanblumenberg)

Download Details:

Author: NagRock
Source Code: https://github.com/NagRock/ts-mockito
License: MIT license

#typescript #testing #mock

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

Design the PCB using your favorite CAD or drawing software.
Print the top and bottom copper and top silk screen layers to a PDF file.
Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
Use a Gerber viewer to double-check the output against the original PCB design.
Make adjustments as needed.
Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.

pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl

iOS App Dev

1620466520

Your Data Architecture: Simple Best Practices for Your Data Strategy

If you accumulate data on which you base your decision-making as an organization, you should probably think about your data architecture and possible best practices.

If you accumulate data on which you base your decision-making as an organization, you most probably need to think about your data architecture and consider possible best practices. Gaining a competitive edge, remaining customer-centric to the greatest extent possible, and streamlining processes to get on-the-button outcomes can all be traced back to an organization’s capacity to build a future-ready data architecture.

In what follows, we offer a short overview of the overarching capabilities of data architecture. These include user-centricity, elasticity, robustness, and the capacity to ensure the seamless flow of data at all times. Added to these are automation enablement, plus security and data governance considerations. These points from our checklist for what we perceive to be an anticipatory analytics ecosystem.

#big data #data science #big data analytics #data analysis #data architecture #data transformation #data platform #data strategy #cloud data platform #data acquisition

Gerhard Brink

1620629020

Getting Started With Data Lakes

Frameworks for Efficient Enterprise Analytics

The opportunities big data offers also come with very real challenges that many organizations are facing today. Often, it’s finding the most cost-effective, scalable way to store and process boundless volumes of data in multiple formats that come from a growing number of sources. Then organizations need the analytical capabilities and flexibility to turn this data into insights that can meet their specific business objectives.

This Refcard dives into how a data lake helps tackle these challenges at both ends — from its enhanced architecture that’s designed for efficient data ingestion, storage, and management to its advanced analytics functionality and performance flexibility. You’ll also explore key benefits and common use cases.

Introduction

As technology continues to evolve with new data sources, such as IoT sensors and social media churning out large volumes of data, there has never been a better time to discuss the possibilities and challenges of managing such data for varying analytical insights. In this Refcard, we dig deep into how data lakes solve the problem of storing and processing enormous amounts of data. While doing so, we also explore the benefits of data lakes, their use cases, and how they differ from data warehouses (DWHs).

This is a preview of the Getting Started With Data Lakes Refcard. To read the entire Refcard, please download the PDF from the link above.

#big data #data analytics #data analysis #business analytics #data warehouse #data storage #data lake #data lake architecture #data lake governance #data lake management

Ian Robinson

1624399200

Top 10 Big Data Tools for Data Management and Analytics

Introduction to Big Data

What exactly is Big Data? Big Data is nothing but large and complex data sets, which can be both structured and unstructured. Its concept encompasses the infrastructures, technologies, and Big Data Tools created to manage this large amount of information.

To fulfill the need to achieve high-performance, Big Data Analytics tools play a vital role. Further, various Big Data tools and frameworks are responsible for retrieving meaningful information from a huge set of data.

List of Big Data Tools & Frameworks

The most important as well as popular Big Data Analytics Open Source Tools which are used in 2020 are as follows:

Big Data Framework
Data Storage Tools
Data Visualization Tools
Big Data Processing Tools
Data Preprocessing Tools
Data Wrangling Tools
Big Data Testing Tools
Data Governance Tools
Security Management Tools
Real-Time Data Streaming Tools

#big data engineering #top 10 big data tools for data management and analytics #big data tools for data management and analytics #tools for data management #analytics #top big data tools for data management and analytics