How to Save JavaScript Canvas Image As Data URL using ToDataURL()

Saving canvas image as Data URL using toDataURL() method

The toDataURL() method is a method from the Canvas API that allows you to store an image drawn on top of the <canvas> element in the form of a Data URL scheme.

The Data URL scheme allows you to embed an image in-line inside your HTML, saving you one extra HTTP request that would otherwise be performed for that image.

The method accepts two optional parameters:

The type string for the image format. Defaults to image/png
The imageQuality number for image types that use lossy compression like image/jpeg. The value must be between 0 and 1 with the default value being 0.92

Let’s see the method in action. Suppose you’ve created a <canvas> element as follows:

<body>
  <canvas
    id="emptyCanvas"
    width="300"
    height="300"
  ></canvas>
  <script>
    let canvas = document.getElementById("emptyCanvas");
    let ctx = canvas.getContext("2d");
    ctx.fillStyle = "blue";
    ctx.fillRect(50, 100, 150, 150);
  </script>
</body>

The code above will produce a rectangle drawing in your web browser as follows:

An image created using HTML Canvas

To transform the image drawn into a Data URL, you only need to call the toDataURI() method on the canvas object:

const dataURL = canvas.toDataURL();
console.log(dataURL);

The console.log() result would be as follows. The ellipsis ... in the second line omits the rest of the output and the third line shows the end of the URI:

data:image/png;base64,
iVBORw0KGgoAAAANSUhEUgAAASwAAAEsCAYAAAB5fY51AAALBElEQ...
ooAghcEBCsC6puIoDACQHBOsHqKAIIXBAQrAuqbiKAwAmBP7PLLTzDQluOAAAAAElFTkSuQmCC

The format of the scheme is as shown below:

data:[<mime type>][;charset=<charset>][;base64],<encoded data>

The encoded data is a very long string that the browser will render as an image. You need to pass the entire scheme as the src attribute of an <img> element.

To test the data scheme, you can copy and pass the Data URL into a new browser window to see the image rendered using the <img> element. Notice how the data:image/png scheme entered into the address bar below:

Image Data URL rendered on the browser

By transforming the image to a Data URL scheme, you can embed any image rendered inside the <canvas> element in any web page without making an extra HTTP request.

But keep in mind that the Data URL scheme is not recommended for large images or images that are changed frequently because the scheme is not cached by the browser, meaning that the image will be downloaded each time the page is loaded.

On the other hand, an HTTP request for the image can be cached by the browser so that the image will be served from the cache when the page is loaded again.

Original article source at: https://sebhastian.com/

#javascript #image #canvas

What is GEEK

Buddha Community

How to Save JavaScript Canvas Image As Data URL using ToDataURL()

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

Design the PCB using your favorite CAD or drawing software.
Print the top and bottom copper and top silk screen layers to a PDF file.
Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
Use a Gerber viewer to double-check the output against the original PCB design.
Make adjustments as needed.
Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.

pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl

Queenie Davis

1653123600

EasyMDE: Simple, Beautiful and Embeddable JavaScript Markdown Editor

EasyMDE - Markdown Editor

This repository is a fork of SimpleMDE, made by Sparksuite. Go to the dedicated section for more information.

A drop-in JavaScript text area replacement for writing beautiful and understandable Markdown. EasyMDE allows users who may be less experienced with Markdown to use familiar toolbar buttons and shortcuts.

In addition, the syntax is rendered while editing to clearly show the expected result. Headings are larger, emphasized words are italicized, links are underlined, etc.

EasyMDE also features both built-in auto saving and spell checking. The editor is entirely customizable, from theming to toolbar buttons and javascript hooks.

Try the demo

Preview

Quick access

EasyMDE - Markdown Editor

Install EasyMDE

Via npm:

npm install easymde

Via the UNPKG CDN:

<link rel="stylesheet" href="https://unpkg.com/easymde/dist/easymde.min.css">
<script src="https://unpkg.com/easymde/dist/easymde.min.js"></script>

Or jsDelivr:

<link rel="stylesheet" href="https://cdn.jsdelivr.net/npm/easymde/dist/easymde.min.css">
<script src="https://cdn.jsdelivr.net/npm/easymde/dist/easymde.min.js"></script>

How to use

Loading the editor

After installing and/or importing the module, you can load EasyMDE onto the first textarea element on the web page:

<textarea></textarea>
<script>
const easyMDE = new EasyMDE();
</script>

Alternatively you can select a specific textarea, via JavaScript:

<textarea id="my-text-area"></textarea>
<script>
const easyMDE = new EasyMDE({element: document.getElementById('my-text-area')});
</script>

Editor functions

Use easyMDE.value() to get the content of the editor:

<script>
easyMDE.value();
</script>

Use easyMDE.value(val) to set the content of the editor:

<script>
easyMDE.value('New input for **EasyMDE**');
</script>

Configuration

Options list

autoDownloadFontAwesome: If set to true, force downloads Font Awesome (used for icons). If set to false, prevents downloading. Defaults to undefined, which will intelligently check whether Font Awesome has already been included, then download accordingly.
autofocus: If set to true, focuses the editor automatically. Defaults to false.
autosave: Saves the text that's being written and will load it back in the future. It will forget the text when the form it's contained in is submitted.
- enabled: If set to true, saves the text automatically. Defaults to false.
- delay: Delay between saves, in milliseconds. Defaults to 10000 (10 seconds).
- submit_delay: Delay before assuming that submit of the form failed and saving the text, in milliseconds. Defaults to autosave.delay or 10000 (10 seconds).
- uniqueId: You must set a unique string identifier so that EasyMDE can autosave. Something that separates this from other instances of EasyMDE elsewhere on your website.
- timeFormat: Set DateTimeFormat. More information see DateTimeFormat instances. Default locale: en-US, format: hour:minute.
- text: Set text for autosave.
autoRefresh: Useful, when initializing the editor in a hidden DOM node. If set to { delay: 300 }, it will check every 300 ms if the editor is visible and if positive, call CodeMirror's refresh().
blockStyles: Customize how certain buttons that style blocks of text behave.
- bold: Can be set to ** or __. Defaults to **.
- code: Can be set to ``` or ~~~. Defaults to ```.
- italic: Can be set to * or _. Defaults to *.
unorderedListStyle: can be *, - or +. Defaults to *.
scrollbarStyle: Chooses a scrollbar implementation. The default is "native", showing native scrollbars. The core library also provides the "null" style, which completely hides the scrollbars. Addons can implement additional scrollbar models.
element: The DOM element for the textarea element to use. Defaults to the first textarea element on the page.
forceSync: If set to true, force text changes made in EasyMDE to be immediately stored in original text area. Defaults to false.
hideIcons: An array of icon names to hide. Can be used to hide specific icons shown by default without completely customizing the toolbar.
indentWithTabs: If set to false, indent using spaces instead of tabs. Defaults to true.
initialValue: If set, will customize the initial value of the editor.
previewImagesInEditor: - EasyMDE will show preview of images, false by default, preview for images will appear only for images on separate lines.
imagesPreviewHandler: - A custom function for handling the preview of images. Takes the parsed string between the parantheses of the image markdown ![]( ) as argument and returns a string that serves as the src attribute of the <img> tag in the preview. Enables dynamic previewing of images in the frontend without having to upload them to a server, allows copy-pasting of images to the editor with preview.
insertTexts: Customize how certain buttons that insert text behave. Takes an array with two elements. The first element will be the text inserted before the cursor or highlight, and the second element will be inserted after. For example, this is the default link value: ["[", "](http://)"].
- horizontalRule
- image
- link
- table
lineNumbers: If set to true, enables line numbers in the editor.
lineWrapping: If set to false, disable line wrapping. Defaults to true.
minHeight: Sets the minimum height for the composition area, before it starts auto-growing. Should be a string containing a valid CSS value like "500px". Defaults to "300px".
maxHeight: Sets fixed height for the composition area. minHeight option will be ignored. Should be a string containing a valid CSS value like "500px". Defaults to undefined.
onToggleFullScreen: A function that gets called when the editor's full screen mode is toggled. The function will be passed a boolean as parameter, true when the editor is currently going into full screen mode, or false.
parsingConfig: Adjust settings for parsing the Markdown during editing (not previewing).
- allowAtxHeaderWithoutSpace: If set to true, will render headers without a space after the #. Defaults to false.
- strikethrough: If set to false, will not process GFM strikethrough syntax. Defaults to true.
- underscoresBreakWords: If set to true, let underscores be a delimiter for separating words. Defaults to false.
overlayMode: Pass a custom codemirror overlay mode to parse and style the Markdown during editing.
- mode: A codemirror mode object.
- combine: If set to false, will replace CSS classes returned by the default Markdown mode. Otherwise the classes returned by the custom mode will be combined with the classes returned by the default mode. Defaults to true.
placeholder: If set, displays a custom placeholder message.
previewClass: A string or array of strings that will be applied to the preview screen when activated. Defaults to "editor-preview".
previewRender: Custom function for parsing the plaintext Markdown and returning HTML. Used when user previews.
promptURLs: If set to true, a JS alert window appears asking for the link or image URL. Defaults to false.
promptTexts: Customize the text used to prompt for URLs.
- image: The text to use when prompting for an image's URL. Defaults to URL of the image:.
- link: The text to use when prompting for a link's URL. Defaults to URL for the link:.
uploadImage: If set to true, enables the image upload functionality, which can be triggered by drag and drop, copy-paste and through the browse-file window (opened when the user click on the upload-image icon). Defaults to false.
imageMaxSize: Maximum image size in bytes, checked before upload (note: never trust client, always check the image size at server-side). Defaults to 1024 * 1024 * 2 (2 MB).
imageAccept: A comma-separated list of mime-types used to check image type before upload (note: never trust client, always check file types at server-side). Defaults to image/png, image/jpeg.
imageUploadFunction: A custom function for handling the image upload. Using this function will render the options imageMaxSize, imageAccept, imageUploadEndpoint and imageCSRFToken ineffective.
- The function gets a file and onSuccess and onError callback functions as parameters. onSuccess(imageUrl: string) and onError(errorMessage: string)
imageUploadEndpoint: The endpoint where the images data will be sent, via an asynchronous POST request. The server is supposed to save this image, and return a JSON response.
- if the request was successfully processed (HTTP 200 OK): {"data": {"filePath": "<filePath>"}} where filePath is the path of the image (absolute if imagePathAbsolute is set to true, relative if otherwise);
- otherwise: {"error": "<errorCode>"}, where errorCode can be noFileGiven (HTTP 400 Bad Request), typeNotAllowed (HTTP 415 Unsupported Media Type), fileTooLarge (HTTP 413 Payload Too Large) or importError (see errorMessages below). If errorCode is not one of the errorMessages, it is alerted unchanged to the user. This allows for server-side error messages. No default value.
imagePathAbsolute: If set to true, will treat imageUrl from imageUploadFunction and filePath returned from imageUploadEndpoint as an absolute rather than relative path, i.e. not prepend window.location.origin to it.
imageCSRFToken: CSRF token to include with AJAX call to upload image. For various instances like Django, Spring and Laravel.
imageCSRFName: CSRF token filed name to include with AJAX call to upload image, applied when imageCSRFToken has value, defaults to csrfmiddlewaretoken.
imageCSRFHeader: If set to true, passing CSRF token via header. Defaults to false, which pass CSRF through request body.
imageTexts: Texts displayed to the user (mainly on the status bar) for the import image feature, where #image_name#, #image_size# and #image_max_size# will replaced by their respective values, that can be used for customization or internationalization:
- sbInit: Status message displayed initially if uploadImage is set to true. Defaults to Attach files by drag and dropping or pasting from clipboard..
- sbOnDragEnter: Status message displayed when the user drags a file to the text area. Defaults to Drop image to upload it..
- sbOnDrop: Status message displayed when the user drops a file in the text area. Defaults to Uploading images #images_names#.
- sbProgress: Status message displayed to show uploading progress. Defaults to Uploading #file_name#: #progress#%.
- sbOnUploaded: Status message displayed when the image has been uploaded. Defaults to Uploaded #image_name#.
- sizeUnits: A comma-separated list of units used to display messages with human-readable file sizes. Defaults to B, KB, MB (example: 218 KB). You can use B,KB,MB instead if you prefer without whitespaces (218KB).
errorMessages: Errors displayed to the user, using the errorCallback option, where #image_name#, #image_size# and #image_max_size# will replaced by their respective values, that can be used for customization or internationalization:
- noFileGiven: The server did not receive any file from the user. Defaults to You must select a file..
- typeNotAllowed: The user send a file type which doesn't match the imageAccept list, or the server returned this error code. Defaults to This image type is not allowed..
- fileTooLarge: The size of the image being imported is bigger than the imageMaxSize, or if the server returned this error code. Defaults to Image #image_name# is too big (#image_size#).\nMaximum file size is #image_max_size#..
- importError: An unexpected error occurred when uploading the image. Defaults to Something went wrong when uploading the image #image_name#..
errorCallback: A callback function used to define how to display an error message. Defaults to (errorMessage) => alert(errorMessage).
renderingConfig: Adjust settings for parsing the Markdown during previewing (not editing).
- codeSyntaxHighlighting: If set to true, will highlight using highlight.js. Defaults to false. To use this feature you must include highlight.js on your page or pass in using the hljs option. For example, include the script and the CSS files like:
  <script src="https://cdn.jsdelivr.net/highlight.js/latest/highlight.min.js"></script>
  <link rel="stylesheet" href="https://cdn.jsdelivr.net/highlight.js/latest/styles/github.min.css">
- hljs: An injectible instance of highlight.js. If you don't want to rely on the global namespace (window.hljs), you can provide an instance here. Defaults to undefined.
- markedOptions: Set the internal Markdown renderer's options. Other renderingConfig options will take precedence.
- singleLineBreaks: If set to false, disable parsing GitHub Flavored Markdown (GFM) single line breaks. Defaults to true.
- sanitizerFunction: Custom function for sanitizing the HTML output of Markdown renderer.
shortcuts: Keyboard shortcuts associated with this instance. Defaults to the array of shortcuts.
showIcons: An array of icon names to show. Can be used to show specific icons hidden by default without completely customizing the toolbar.
spellChecker: If set to false, disable the spell checker. Defaults to true. Optionally pass a CodeMirrorSpellChecker-compliant function.
inputStyle: textarea or contenteditable. Defaults to textarea for desktop and contenteditable for mobile. contenteditable option is necessary to enable nativeSpellcheck.
nativeSpellcheck: If set to false, disable native spell checker. Defaults to true.
sideBySideFullscreen: If set to false, allows side-by-side editing without going into fullscreen. Defaults to true.
status: If set to false, hide the status bar. Defaults to the array of built-in status bar items.
- Optionally, you can set an array of status bar items to include, and in what order. You can even define your own custom status bar items.
styleSelectedText: If set to false, remove the CodeMirror-selectedtext class from selected lines. Defaults to true.
syncSideBySidePreviewScroll: If set to false, disable syncing scroll in side by side mode. Defaults to true.
tabSize: If set, customize the tab size. Defaults to 2.
theme: Override the theme. Defaults to easymde.
toolbar: If set to false, hide the toolbar. Defaults to the array of icons.
toolbarTips: If set to false, disable toolbar button tips. Defaults to true.
direction: rtl or ltr. Changes text direction to support right-to-left languages. Defaults to ltr.

Options example

Most options demonstrate the non-default behavior:

const editor = new EasyMDE({
    autofocus: true,
    autosave: {
        enabled: true,
        uniqueId: "MyUniqueID",
        delay: 1000,
        submit_delay: 5000,
        timeFormat: {
            locale: 'en-US',
            format: {
                year: 'numeric',
                month: 'long',
                day: '2-digit',
                hour: '2-digit',
                minute: '2-digit',
            },
        },
        text: "Autosaved: "
    },
    blockStyles: {
        bold: "__",
        italic: "_",
    },
    unorderedListStyle: "-",
    element: document.getElementById("MyID"),
    forceSync: true,
    hideIcons: ["guide", "heading"],
    indentWithTabs: false,
    initialValue: "Hello world!",
    insertTexts: {
        horizontalRule: ["", "\n\n-----\n\n"],
        image: ["![](http://", ")"],
        link: ["[", "](https://)"],
        table: ["", "\n\n| Column 1 | Column 2 | Column 3 |\n| -------- | -------- | -------- |\n| Text     | Text      | Text     |\n\n"],
    },
    lineWrapping: false,
    minHeight: "500px",
    parsingConfig: {
        allowAtxHeaderWithoutSpace: true,
        strikethrough: false,
        underscoresBreakWords: true,
    },
    placeholder: "Type here...",

    previewClass: "my-custom-styling",
    previewClass: ["my-custom-styling", "more-custom-styling"],

    previewRender: (plainText) => customMarkdownParser(plainText), // Returns HTML from a custom parser
    previewRender: (plainText, preview) => { // Async method
        setTimeout(() => {
            preview.innerHTML = customMarkdownParser(plainText);
        }, 250);

        return "Loading...";
    },
    promptURLs: true,
    promptTexts: {
        image: "Custom prompt for URL:",
        link: "Custom prompt for URL:",
    },
    renderingConfig: {
        singleLineBreaks: false,
        codeSyntaxHighlighting: true,
        sanitizerFunction: (renderedHTML) => {
            // Using DOMPurify and only allowing <b> tags
            return DOMPurify.sanitize(renderedHTML, {ALLOWED_TAGS: ['b']})
        },
    },
    shortcuts: {
        drawTable: "Cmd-Alt-T"
    },
    showIcons: ["code", "table"],
    spellChecker: false,
    status: false,
    status: ["autosave", "lines", "words", "cursor"], // Optional usage
    status: ["autosave", "lines", "words", "cursor", {
        className: "keystrokes",
        defaultValue: (el) => {
            el.setAttribute('data-keystrokes', 0);
        },
        onUpdate: (el) => {
            const keystrokes = Number(el.getAttribute('data-keystrokes')) + 1;
            el.innerHTML = `${keystrokes} Keystrokes`;
            el.setAttribute('data-keystrokes', keystrokes);
        },
    }], // Another optional usage, with a custom status bar item that counts keystrokes
    styleSelectedText: false,
    sideBySideFullscreen: false,
    syncSideBySidePreviewScroll: false,
    tabSize: 4,
    toolbar: false,
    toolbarTips: false,
});

Toolbar icons

Below are the built-in toolbar icons (only some of which are enabled by default), which can be reorganized however you like. "Name" is the name of the icon, referenced in the JavaScript. "Action" is either a function or a URL to open. "Class" is the class given to the icon. "Tooltip" is the small tooltip that appears via the title="" attribute. Note that shortcut hints are added automatically and reflect the specified action if it has a key bind assigned to it (i.e. with the value of action set to bold and that of tooltip set to Bold, the final text the user will see would be "Bold (Ctrl-B)").

Additionally, you can add a separator between any icons by adding "|" to the toolbar array.

Name	Action	Tooltip Class
bold	toggleBold	Bold fa fa-bold
italic	toggleItalic	Italic fa fa-italic
strikethrough	toggleStrikethrough	Strikethrough fa fa-strikethrough
heading	toggleHeadingSmaller	Heading fa fa-header
heading-smaller	toggleHeadingSmaller	Smaller Heading fa fa-header
heading-bigger	toggleHeadingBigger	Bigger Heading fa fa-lg fa-header
heading-1	toggleHeading1	Big Heading fa fa-header header-1
heading-2	toggleHeading2	Medium Heading fa fa-header header-2
heading-3	toggleHeading3	Small Heading fa fa-header header-3
code	toggleCodeBlock	Code fa fa-code
quote	toggleBlockquote	Quote fa fa-quote-left
unordered-list	toggleUnorderedList	Generic List fa fa-list-ul
ordered-list	toggleOrderedList	Numbered List fa fa-list-ol
clean-block	cleanBlock	Clean block fa fa-eraser
link	drawLink	Create Link fa fa-link
image	drawImage	Insert Image fa fa-picture-o
table	drawTable	Insert Table fa fa-table
horizontal-rule	drawHorizontalRule	Insert Horizontal Line fa fa-minus
preview	togglePreview	Toggle Preview fa fa-eye no-disable
side-by-side	toggleSideBySide	Toggle Side by Side fa fa-columns no-disable no-mobile
fullscreen	toggleFullScreen	Toggle Fullscreen fa fa-arrows-alt no-disable no-mobile
guide	This link	Markdown Guide fa fa-question-circle
undo	undo	Undo fa fa-undo
redo	redo	Redo fa fa-redo

Toolbar customization

Customize the toolbar using the toolbar option.

Only the order of existing buttons:

const easyMDE = new EasyMDE({
    toolbar: ["bold", "italic", "heading", "|", "quote"]
});

All information and/or add your own icons

const easyMDE = new EasyMDE({
    toolbar: [
        {
            name: "bold",
            action: EasyMDE.toggleBold,
            className: "fa fa-bold",
            title: "Bold",
        },
        "italics", // shortcut to pre-made button
        {
            name: "custom",
            action: (editor) => {
                // Add your own code
            },
            className: "fa fa-star",
            title: "Custom Button",
            attributes: { // for custom attributes
                id: "custom-id",
                "data-value": "custom value" // HTML5 data-* attributes need to be enclosed in quotation marks ("") because of the dash (-) in its name.
            }
        },
        "|" // Separator
        // [, ...]
    ]
});

Put some buttons on dropdown menu

const easyMDE = new EasyMDE({
    toolbar: [{
                name: "heading",
                action: EasyMDE.toggleHeadingSmaller,
                className: "fa fa-header",
                title: "Headers",
            },
            "|",
            {
                name: "others",
                className: "fa fa-blind",
                title: "others buttons",
                children: [
                    {
                        name: "image",
                        action: EasyMDE.drawImage,
                        className: "fa fa-picture-o",
                        title: "Image",
                    },
                    {
                        name: "quote",
                        action: EasyMDE.toggleBlockquote,
                        className: "fa fa-percent",
                        title: "Quote",
                    },
                    {
                        name: "link",
                        action: EasyMDE.drawLink,
                        className: "fa fa-link",
                        title: "Link",
                    }
                ]
            },
        // [, ...]
    ]
});

Keyboard shortcuts

EasyMDE comes with an array of predefined keyboard shortcuts, but they can be altered with a configuration option. The list of default ones is as follows:

Shortcut (Windows / Linux)	Shortcut (macOS)	Action
Ctrl-'	Cmd-'	"toggleBlockquote"
Ctrl-B	Cmd-B	"toggleBold"
Ctrl-E	Cmd-E	"cleanBlock"
Ctrl-H	Cmd-H	"toggleHeadingSmaller"
Ctrl-I	Cmd-I	"toggleItalic"
Ctrl-K	Cmd-K	"drawLink"
Ctrl-L	Cmd-L	"toggleUnorderedList"
Ctrl-P	Cmd-P	"togglePreview"
Ctrl-Alt-C	Cmd-Alt-C	"toggleCodeBlock"
Ctrl-Alt-I	Cmd-Alt-I	"drawImage"
Ctrl-Alt-L	Cmd-Alt-L	"toggleOrderedList"
Shift-Ctrl-H	Shift-Cmd-H	"toggleHeadingBigger"
F9	F9	"toggleSideBySide"
F11	F11	"toggleFullScreen"

Here is how you can change a few, while leaving others untouched:

const editor = new EasyMDE({
    shortcuts: {
        "toggleOrderedList": "Ctrl-Alt-K", // alter the shortcut for toggleOrderedList
        "toggleCodeBlock": null, // unbind Ctrl-Alt-C
        "drawTable": "Cmd-Alt-T", // bind Cmd-Alt-T to drawTable action, which doesn't come with a default shortcut
    }
});

Shortcuts are automatically converted between platforms. If you define a shortcut as "Cmd-B", on PC that shortcut will be changed to "Ctrl-B". Conversely, a shortcut defined as "Ctrl-B" will become "Cmd-B" for Mac users.

The list of actions that can be bound is the same as the list of built-in actions available for toolbar buttons.

Advanced use

Event handling

You can catch the following list of events: https://codemirror.net/doc/manual.html#events

const easyMDE = new EasyMDE();
easyMDE.codemirror.on("change", () => {
    console.log(easyMDE.value());
});

Removing EasyMDE from text area

You can revert to the initial text area by calling the toTextArea method. Note that this clears up the autosave (if enabled) associated with it. The text area will retain any text from the destroyed EasyMDE instance.

const easyMDE = new EasyMDE();
// ...
easyMDE.toTextArea();
easyMDE = null;

If you need to remove registered event listeners (when the editor is not needed anymore), call easyMDE.cleanup().

Useful methods

The following self-explanatory methods may be of use while developing with EasyMDE.

const easyMDE = new EasyMDE();
easyMDE.isPreviewActive(); // returns boolean
easyMDE.isSideBySideActive(); // returns boolean
easyMDE.isFullscreenActive(); // returns boolean
easyMDE.clearAutosavedValue(); // no returned value

How it works

EasyMDE is a continuation of SimpleMDE.

SimpleMDE began as an improvement of lepture's Editor project, but has now taken on an identity of its own. It is bundled with CodeMirror and depends on Font Awesome.

CodeMirror is the backbone of the project and parses much of the Markdown syntax as it's being written. This allows us to add styles to the Markdown that's being written. Additionally, a toolbar and status bar have been added to the top and bottom, respectively. Previews are rendered by Marked using GitHub Flavored Markdown (GFM).

SimpleMDE fork

I originally made this fork to implement FontAwesome 5 compatibility into SimpleMDE. When that was done I submitted a pull request, which has not been accepted yet. This, and the project being inactive since May 2017, triggered me to make more changes and try to put new life into the project.

Changes include:

FontAwesome 5 compatibility
Guide button works when editor is in preview mode
Links are now https:// by default
Small styling changes
Support for Node 8 and beyond
Lots of refactored code
Links in preview will open in a new tab by default
TypeScript support

My intention is to continue development on this project, improving it and keeping it alive.

Hacking EasyMDE

You may want to edit this library to adapt its behavior to your needs. This can be done in some quick steps:

Follow the prerequisites and installation instructions in the contribution guide;
Do your changes;
Run gulp command, which will generate files: dist/easymde.min.css and dist/easymde.min.js;
Copy-paste those files to your code base, and you are done.

Contributing

Want to contribute to EasyMDE? Thank you! We have a contribution guide just for you!

Author: Ionaru
Source Code: https://github.com/Ionaru/easy-markdown-editor
License: MIT license

#react-native #react

Sasha Roberts

1659500100

Reform: Form Objects Decoupled From Models In Ruby

Reform

Form objects decoupled from your models.

Reform gives you a form object with validations and nested setup of models. It is completely framework-agnostic and doesn't care about your database.

Although reform can be used in any Ruby framework, it comes with Rails support, works with simple_form and other form gems, allows nesting forms to implement has_one and has_many relationships, can compose a form from multiple objects and gives you coercion.

Full Documentation

Reform is part of the Trailblazer framework. Full documentation is available on the project site.

Reform 2.2

Temporary note: Reform 2.2 does not automatically load Rails files anymore (e.g. ActiveModel::Validations). You need the reform-rails gem, see Installation.

Defining Forms

Forms are defined in separate classes. Often, these classes partially map to a model.

class AlbumForm < Reform::Form
  property :title
  validates :title, presence: true
end

Fields are declared using ::property. Validations work exactly as you know it from Rails or other frameworks. Note that validations no longer go into the model.

The API

Forms have a ridiculously simple API with only a handful of public methods.

#initialize always requires a model that the form represents.
#validate(params) updates the form's fields with the input data (only the form, not the model) and then runs all validations. The return value is the boolean result of the validations.
#errors returns validation messages in a classic ActiveModel style.
#sync writes form data back to the model. This will only use setter methods on the model(s).
#save (optional) will call #save on the model and nested models. Note that this implies a #sync call.
#prepopulate! (optional) will run pre-population hooks to "fill out" your form before rendering.

In addition to the main API, forms expose accessors to the defined properties. This is used for rendering or manual operations.

Setup

In your controller or operation you create a form instance and pass in the models you want to work on.

class AlbumsController
  def new
    @form = AlbumForm.new(Album.new)
  end

This will also work as an editing form with an existing album.

def edit
  @form = AlbumForm.new(Album.find(1))
end

Reform will read property values from the model in setup. In our example, the AlbumForm will call album.title to populate the title field.

Rendering Forms

Your @form is now ready to be rendered, either do it yourself or use something like Rails' #form_for, simple_form or formtastic.

= form_for @form do |f|
  = f.input :title

Nested forms and collections can be easily rendered with fields_for, etc. Note that you no longer pass the model to the form builder, but the Reform instance.

Optionally, you might want to use the #prepopulate! method to pre-populate fields and prepare the form for rendering.

Validation

After form submission, you need to validate the input.

class SongsController
  def create
    @form = SongForm.new(Song.new)

    #=> params: {song: {title: "Rio", length: "366"}}

    if @form.validate(params[:song])

The #validate method first updates the values of the form - the underlying model is still treated as immutuable and remains unchanged. It then runs all validations you provided in the form.

It's the only entry point for updating the form. This is per design, as separating writing and validation doesn't make sense for a form.

This allows rendering the form after validate with the data that has been submitted. However, don't get confused, the model's values are still the old, original values and are only changed after a #save or #sync operation.

Syncing Back

After validation, you have two choices: either call #save and let Reform sort out the rest. Or call #sync, which will write all the properties back to the model. In a nested form, this works recursively, of course.

It's then up to you what to do with the updated models - they're still unsaved.

Saving Forms

The easiest way to save the data is to call #save on the form.

if @form.validate(params[:song])
  @form.save  #=> populates album with incoming data
              #   by calling @form.album.title=.
else
  # handle validation errors.
end

This will sync the data to the model and then call album.save.

Sometimes, you need to do saving manually.

Default values

Reform allows default values to be provided for properties.

class AlbumForm < Reform::Form
  property :price_in_cents, default: 9_95
end

Saving Forms Manually

Calling #save with a block will provide a nested hash of the form's properties and values. This does not call #save on the models and allows you to implement the saving yourself.

The block parameter is a nested hash of the form input.

  @form.save do |hash|
    hash      #=> {title: "Greatest Hits"}
    Album.create(hash)
  end

You can always access the form's model. This is helpful when you were using populators to set up objects when validating.

  @form.save do |hash|
    album = @form.model

    album.update_attributes(hash[:album])
  end

Nesting

Reform provides support for nested objects. Let's say the Album model keeps some associations.

class Album < ActiveRecord::Base
  has_one  :artist
  has_many :songs
end

The implementation details do not really matter here, as long as your album exposes readers and writes like Album#artist and Album#songs, this allows you to define nested forms.

class AlbumForm < Reform::Form
  property :title
  validates :title, presence: true

  property :artist do
    property :full_name
    validates :full_name, presence: true
  end

  collection :songs do
    property :name
  end
end

You can also reuse an existing form from elsewhere using :form.

property :artist, form: ArtistForm

Nested Setup

Reform will wrap defined nested objects in their own forms. This happens automatically when instantiating the form.

album.songs #=> [<Song name:"Run To The Hills">]

form = AlbumForm.new(album)
form.songs[0] #=> <SongForm model: <Song name:"Run To The Hills">>
form.songs[0].name #=> "Run To The Hills"

Nested Rendering

When rendering a nested form you can use the form's readers to access the nested forms.

= text_field :title,         @form.title
= text_field "artist[name]", @form.artist.name

Or use something like #fields_for in a Rails environment.

= form_for @form do |f|
  = f.text_field :title

  = f.fields_for :artist do |a|
    = a.text_field :name

Nested Processing

validate will assign values to the nested forms. sync and save work analogue to the non-nested form, just in a recursive way.

The block form of #save would give you the following data.

@form.save do |nested|
  nested #=> {title:  "Greatest Hits",
         #    artist: {name: "Duran Duran"},
         #    songs: [{title: "Hungry Like The Wolf"},
         #            {title: "Last Chance On The Stairways"}]
         #   }
  end

The manual saving with block is not encouraged. You should rather check the Disposable docs to find out how to implement your manual tweak with the official API.

Populating Forms

Very often, you need to give Reform some information how to create or find nested objects when validateing. This directive is called populator and documented here.

Installation

Add this line to your Gemfile:

gem "reform"

Reform works fine with Rails 3.1-5.0. However, inheritance of validations with ActiveModel::Validations is broken in Rails 3.2 and 4.0.

Since Reform 2.2, you have to add the reform-rails gem to your Gemfile to automatically load ActiveModel/Rails files.

gem "reform-rails"

Since Reform 2.0 you need to specify which validation backend you want to use (unless you're in a Rails environment where ActiveModel will be used).

To use ActiveModel (not recommended because very out-dated).

require "reform/form/active_model/validations"
Reform::Form.class_eval do
  include Reform::Form::ActiveModel::Validations
end

To use dry-validation (recommended).

require "reform/form/dry"
Reform::Form.class_eval do
  feature Reform::Form::Dry
end

Put this in an initializer or on top of your script.

Compositions

Reform allows to map multiple models to one form. The complete documentation is here, however, this is how it works.

class AlbumForm < Reform::Form
  include Composition

  property :id,    on: :album
  property :title, on: :album
  property :songs, on: :cd
  property :cd_id, on: :cd, from: :id
end

When initializing a composition, you have to pass a hash that contains the composees.

AlbumForm.new(album: album, cd: CD.find(1))

Reform comes many more optional features, like hash fields, coercion, virtual fields, and so on. Check the full documentation here.

Reform is part of the Trailblazer project. Please buy my book to support the development and learn everything about Reform - there's two chapters dedicated to Reform!

Security And Strong_parameters

By explicitly defining the form layout using ::property there is no more need for protecting from unwanted input. strong_parameter or attr_accessible become obsolete. Reform will simply ignore undefined incoming parameters.

This is not Reform 1.x!

Temporary note: This is the README and API for Reform 2. On the public API, only a few tiny things have changed. Here are the Reform 1.2 docs.

Anyway, please upgrade and report problems and do not simply assume that we will magically find out what needs to get fixed. When in trouble, join us on Gitter.

Full documentation for Reform is available online, or support us and grab the Trailblazer book. There is an Upgrading Guide to help you migrate through versions.

Attributions!!!

Great thanks to Blake Education for giving us the freedom and time to develop this project in 2013 while working on their project.

Author: trailblazer
Source code: https://github.com/trailblazer/reform
License: MIT license

#ruby #ruby-on-rails

iOS App Dev

1620466520

Your Data Architecture: Simple Best Practices for Your Data Strategy

If you accumulate data on which you base your decision-making as an organization, you should probably think about your data architecture and possible best practices.

If you accumulate data on which you base your decision-making as an organization, you most probably need to think about your data architecture and consider possible best practices. Gaining a competitive edge, remaining customer-centric to the greatest extent possible, and streamlining processes to get on-the-button outcomes can all be traced back to an organization’s capacity to build a future-ready data architecture.

In what follows, we offer a short overview of the overarching capabilities of data architecture. These include user-centricity, elasticity, robustness, and the capacity to ensure the seamless flow of data at all times. Added to these are automation enablement, plus security and data governance considerations. These points from our checklist for what we perceive to be an anticipatory analytics ecosystem.

#big data #data science #big data analytics #data analysis #data architecture #data transformation #data platform #data strategy #cloud data platform #data acquisition

Sheldon Grant

1669278904