Devyn  Reilly

Devyn Reilly

1623907980

Migrating MySQL to YugabyteDB Using pgloader

We understand that database migrations can be painful. We have helped users successfully migrate from MySQL to YugabyteDB, a PostgreSQL-compatible distributed SQL database. A very popular tool to accomplish this task is pgloader. In this post, we will cover how to migrate both your MySQL schema as well as data to YugabyteDB.

Prerequisites

Before starting the migration there are a few prerequisites you’ll need to address.

You’ll need access to the MySQL database from which you wish to migrate the schema and data. Additionally, you’ll need to have ysqlsh command line connectivity to a running YugabyteDB cluster that you are going to migrate into.

Create a database on the YugabyteDB cluster that you will migrate into from the source cluster. This database needs to match the database name from MySQL. There would not be any tables or data behind the database but pgloader requires the database to exist on the target cluster. You can create the database by following these steps:

## Use ysqlsh to connect to any node of the YugabyteDB cluster
ysqlsh --host=<ip>

## Create the database
create database <name>;

#databases #mysql #pgloader

What is GEEK

Buddha Community

Migrating MySQL to YugabyteDB Using pgloader
Chloe  Butler

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

  1. Design the PCB using your favorite CAD or drawing software.
  2. Print the top and bottom copper and top silk screen layers to a PDF file.
  3. Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
  4. Use a Gerber viewer to double-check the output against the original PCB design.
  5. Make adjustments as needed.
  6. Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.


pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl 

Joe  Hoppe

Joe Hoppe

1595905879

Best MySQL DigitalOcean Performance – ScaleGrid vs. DigitalOcean Managed Databases

HTML to Markdown

MySQL is the all-time number one open source database in the world, and a staple in RDBMS space. DigitalOcean is quickly building its reputation as the developers cloud by providing an affordable, flexible and easy to use cloud platform for developers to work with. MySQL on DigitalOcean is a natural fit, but what’s the best way to deploy your cloud database? In this post, we are going to compare the top two providers, DigitalOcean Managed Databases for MySQL vs. ScaleGrid MySQL hosting on DigitalOcean.

At a glance – TLDR
ScaleGrid Blog - At a glance overview - 1st pointCompare Throughput
ScaleGrid averages almost 40% higher throughput over DigitalOcean for MySQL, with up to 46% higher throughput in write-intensive workloads. Read now

ScaleGrid Blog - At a glance overview - 2nd pointCompare Latency
On average, ScaleGrid achieves almost 30% lower latency over DigitalOcean for the same deployment configurations. Read now

ScaleGrid Blog - At a glance overview - 3rd pointCompare Pricing
ScaleGrid provides 30% more storage on average vs. DigitalOcean for MySQL at the same affordable price. Read now

MySQL DigitalOcean Performance Benchmark
In this benchmark, we compare equivalent plan sizes between ScaleGrid MySQL on DigitalOcean and DigitalOcean Managed Databases for MySQL. We are going to use a common, popular plan size using the below configurations for this performance benchmark:

Comparison Overview
ScaleGridDigitalOceanInstance TypeMedium: 4 vCPUsMedium: 4 vCPUsMySQL Version8.0.208.0.20RAM8GB8GBSSD140GB115GBDeployment TypeStandaloneStandaloneRegionSF03SF03SupportIncludedBusiness-level support included with account sizes over $500/monthMonthly Price$120$120

As you can see above, ScaleGrid and DigitalOcean offer the same plan configurations across this plan size, apart from SSD where ScaleGrid provides over 20% more storage for the same price.

To ensure the most accurate results in our performance tests, we run the benchmark four times for each comparison to find the average performance across throughput and latency over read-intensive workloads, balanced workloads, and write-intensive workloads.

Throughput
In this benchmark, we measure MySQL throughput in terms of queries per second (QPS) to measure our query efficiency. To quickly summarize the results, we display read-intensive, write-intensive and balanced workload averages below for 150 threads for ScaleGrid vs. DigitalOcean MySQL:

ScaleGrid MySQL vs DigitalOcean Managed Databases - Throughput Performance Graph

For the common 150 thread comparison, ScaleGrid averages almost 40% higher throughput over DigitalOcean for MySQL, with up to 46% higher throughput in write-intensive workloads.

#cloud #database #developer #digital ocean #mysql #performance #scalegrid #95th percentile latency #balanced workloads #developers cloud #digitalocean droplet #digitalocean managed databases #digitalocean performance #digitalocean pricing #higher throughput #latency benchmark #lower latency #mysql benchmark setup #mysql client threads #mysql configuration #mysql digitalocean #mysql latency #mysql on digitalocean #mysql throughput #performance benchmark #queries per second #read-intensive #scalegrid mysql #scalegrid vs. digitalocean #throughput benchmark #write-intensive

Adaline  Kulas

Adaline Kulas

1594166040

What are the benefits of cloud migration? Reasons you should migrate

The moving of applications, databases and other business elements from the local server to the cloud server called cloud migration. This article will deal with migration techniques, requirement and the benefits of cloud migration.

In simple terms, moving from local to the public cloud server is called cloud migration. Gartner says 17.5% revenue growth as promised in cloud migration and also has a forecast for 2022 as shown in the following image.

#cloud computing services #cloud migration #all #cloud #cloud migration strategy #enterprise cloud migration strategy #business benefits of cloud migration #key benefits of cloud migration #benefits of cloud migration #types of cloud migration

Devyn  Reilly

Devyn Reilly

1623907980

Migrating MySQL to YugabyteDB Using pgloader

We understand that database migrations can be painful. We have helped users successfully migrate from MySQL to YugabyteDB, a PostgreSQL-compatible distributed SQL database. A very popular tool to accomplish this task is pgloader. In this post, we will cover how to migrate both your MySQL schema as well as data to YugabyteDB.

Prerequisites

Before starting the migration there are a few prerequisites you’ll need to address.

You’ll need access to the MySQL database from which you wish to migrate the schema and data. Additionally, you’ll need to have ysqlsh command line connectivity to a running YugabyteDB cluster that you are going to migrate into.

Create a database on the YugabyteDB cluster that you will migrate into from the source cluster. This database needs to match the database name from MySQL. There would not be any tables or data behind the database but pgloader requires the database to exist on the target cluster. You can create the database by following these steps:

## Use ysqlsh to connect to any node of the YugabyteDB cluster
ysqlsh --host=<ip>

## Create the database
create database <name>;

#databases #mysql #pgloader

Seamus  Quitzon

Seamus Quitzon

1595205213

How to perform migration rollback in laravel

As we know that laravel migration provides very simple way to create database table structure. We need to create migration file and write table structure then migrate that migration. Sometimes we need to rollback that migration. So here we will discuss about the migration rollback in laravel.

We can run the rollback artisan command to rollback on a particular step. We can execute the following artisan command.

php artisan migrate:rollback --step=1

Every time when we will rollback, we will get the last batch of migration.

**Note: **This rollback command will work on laravel 5.3 or above version. For the version below 5.3, there is no command available for migration rollback in laravel.

We can also use the following command to rollback and re migrate.

php artisan migrate:refresh --step=2

It will rollback and remigrate last two migration.

You can also checkout the article for executing single migration by clicking on the link below.

How to migrate single migration in laravel

#laravel #how to perform rollback migration in laravel #laravel migration rollback #migration refresh in laravel #migration rollback batch in laravel #migration rollback for one specific migration #migration rollback in laravel