Building a progressive web app (PWA): No React, no Angular, no Vue

Building a progressive web app (PWA): No React, no Angular, no Vue

Recently, Progressive Web Apps (PWAs) have gained a lot more attention. Partially, the now available set of APIs in browsers (especially on mobile) are part of that.

Recently, Progressive Web Apps (PWAs) have gained a lot more attention. Partially, the now available set of APIs in browsers (especially on mobile) are part of that.

The other part could be found in the still available desire to scale a web app into a mobile app with all the benefits and without the drawbacks. One of these drawbacks is the platform lock-in, i.e., satisfying the requirement of being listed in the platform vendor’s store.

In this article, we will explore what it takes to build a PWA these days and what disadvantages or blockers we face on the way. We will explore the most useful APIs and get a minimum example from zero to PWA.


History

Let’s start with a little bit of an historic background. The main idea of a PWA is to use as much the device’s native capabilities as possible. That includes the various sensors such as GPS, accelerometer, accelerometer, etc. However, most importantly a PWA should work offline as well. That means no “page not found” or similar errors when offline.

The ability to go offline was already included in browsers years ago — it was the app cache or app manifest. In this specification, we require a special file (usually called something like app.cache or app.manifest) to describe what resources should be available for offline use, only for online use, or being replaced when going from one mode to the other. The approach, however, faced many issues (especially in updating the manifest itself) and was not widely adopted.

While the manifest approach was failing Mozilla came up with a lot of new APIs — mostly for their Firefox OS mobile system. In this endeavor, Mozilla explored the possibility of using web apps like mobile apps including a web store, which could theoretically also used be included by other platforms such as Android or iOS. Unfortunately, Firefox OS never really gained traction on and the adoption of most of these standards failed to become critical. As a result, the dream of “an open store” or “a store specification” failed.

Nevertheless, some of the APIs continued to be specified and adopted.

One of the APIs that gained a lot from the Firefox OS experiment was the service worker. Much like the web worker, it represents an isolated JS execution environment that is executed and stopped from the underlying platform. The only way to communicate with it is via message passing. The service worker provided a vast set of possibilities that were partially missing from web apps (as compared to mobile apps) and allowed more flexibility for handling caching in offline scenarios.

With all the APIs in the right place a couple of influential people coined a new term, “Progress Web App”, for web apps that:

could be used like native apps, but are actually delivered like any other web app — no separate bundling, distribution, or anything needed.

According to Wikipedia the following characteristics exist:

  • Progressive: Work for every user, regardless of browser choice because they’re built with progressive enhancement as a core tenet.
  • Responsive: Fit any form factor: desktop, mobile, tablet, or forms yet to emerge.
  • Connectivity independent: Service workers allow work offline, or on low quality networks.
  • App-like: Feel like an app to the user with app-style interactions and navigation.
  • Fresh: Always up-to-date thanks to the service worker update process.
  • Safe: Served via HTTPS to prevent snooping and ensure content hasn’t been tampered with.
  • Discoverable: Are identifiable as “applications” thanks to W3C manifests and service worker registration scope allowing search engines to find them.
  • Re-engageable: Make re-engagement easy through features like push notifications.
  • Installable: Allow users to “keep” apps they find most useful on their home screen without the hassle of an app store.
  • Linkable: Easily shared via a URL and do not require complex installation.

But what the implementations look like? Good question. Let’s review each characteristic.

To fresh things up a bit we will explain every part in the context of an example app.

The order of the previous bullet points has been adjusted to follow a more natural implementation flow.


Example

As we come from a web background, we assume that all these points are implicitly handled. Hence we will leave out the obvious points, e.g., the progressive part, the safe part, and the linkable part. The safe part indicates only that our web app originates from a secure origin. It is served over TLS and displays a green padlock (no active mixed content).

Our example starts out with three files in a simple rudimentary state:

  • index.html containing the HTML definition
  • style.css for the layout
  • app.js describes the logic

The current logic of our sample application looks as follows:

(function () {
  const app = document.querySelector('#app');
  const container = app.querySelector('.entry-container');
  const loadMore = app.querySelector('.load-more');

async function getPosts(page = 1) {
const result = await fetch('https://jsonplaceholder.typicode.com/posts?_page=' + page);
return await result.json();
}

async function getUsers() {
const result = await fetch('https://jsonplaceholder.typicode.com/users');
return await result.json();
}

async function loadEntries(page = 1) {
const [users, posts] = await Promise.all([getUsers(), getPosts(page)]);
return posts.map(post => {
const user = users.filter(u => u.id === post.userId)[0];
return <section class="entry"><h2 class="entry-title">${post.title}</h2><article class="entry-body">${post.body}</article><div class="entry-author"><a href="mailto:${user.email}">${user.name}</a></div></section>;
}).join('');
}

function appendEntries(entries) {
const output = container.querySelector('output') || container.appendChild(document.createElement('output'));
output.outerHTML = entries + '<output></output>';
}

(async function() {
let page = 1;

async function loadMoreEntries() {
  loadMore.disabled = true;
  const entries = await loadEntries(page++);
  appendEntries(entries);
  loadMore.disabled = false;
}

loadMore.addEventListener('click', loadMoreEntries, false);
loadMoreEntries();

})();
})();

original-app.js hosted with ❤ by GitHub

No React, no Angular, no Vue. Just direct DOM manipulation with some more recent APIs (e.g., fetch) and JS specs (e.g., using async / await). For the sake of simplicity we will not even bundle (e.g., optimize, polyfill, and minimize) this application.

The logic is to simple load some initial entries and have some load more functionality by clicking a button. For the example we use the jsonplaceholder service, which gives us some sample data.

Without further ado, let’s go right into details.


Discoverable

Our web app can be identified as an “application” thanks to the W3C manifest and service worker registration scope. As a consequence this is allowing search engines to easily find (read “discover”) it.

Reference a web app manifest with at least the four key properties:

  • name,
  • short_name,
  • start_url, and
  • display (value being either “standalone” or “fullscreen”).

To reference a web app manifest we only need two things. On the one hand a valid web app manifest (e.g., a file called manifest.json in root folder of our web app) and a link in our HTML page:

<link href="manifest.json" rel="manifest">

manifest-link.html hosted with ❤ by GitHub

The content may be as simple as:

{
"name": "Example App",
"short_name": "ExApp",
"theme_color": "#2196f3",
"background_color": "#2196f3",
"display": "browser",
"scope": "/",
"start_url": "/"
}

basic-manifest.json hosted with ❤ by GitHub

A couple of nice manifest generators exist; either in form of a dedicated web app or as part of our build pipeline. The latter is quite convenient, like when using a Webpack build to autogenerate the manifest with consistent content.

One example for a nice web app to generate a valid manifest is the Web App Manifest Generator.

To detect that our manifest was valid and picked up correctly we can use the debugging tools of our browser of choice. In Chrome, this currently looks as follows:

The Chrome “Application Manifest” debugger tooling.


Installable

Allow users to “keep” apps they find most useful on their home screen without the hassle of an app store.

At least include a 144×144 large icon in png format in the manifest:

"icons": [
{
"src": "/images/icon-144.png",
"sizes": "144x144",
"type": "image/png"
}
]

icon-manifest.part.json hosted with ❤ by GitHub

The great thing about the previously mentioned generators is that most of them will already create the icon array for us. Even better, we only need to supply one (larger) base image which will lead to all other icons.

Mostly, installable refers to installing a service worker (more on that later) and being launchable from the home screen, which makes the application also app-like.


App-like

Feel like an app to the user with app-style interactions and navigation. While we will never be a true native app we should embrace touch gestures and mobile-friendly usage patterns.

Most importantly, as already discussed we want to be launchable from the homescreen. Some browsers allow us to show the add to home screen prompt. This only requires listening to the beforeinstallprompt event. Most importantly, the already mentioned manifest needs to include some specific icons (a 192x192 large icon, for example).

In a nutshell, we can listen for the event and react with showing the browser’s default prompt. Alternatively, we can also capture the event args and use them in a custom UI. It’s all up to us. A simple implementation may therefore look like:

window.addEventListener('beforeinstallprompt', e => {
e.preventDefault();
e.prompt();
});

push-prompt.js hosted with ❤ by GitHub

More information on this feature can be found on Google’s documentation.


Responsive

Fit any form factor: desktop, mobile, tablet, or forms yet to emerge. Keep in mind that responsive design is not a constraint to react to different screen sizes, it also implies reacting to different forms of input and/or output.

Of course, targeting everything that is out there (smart speakers, smartwatches, phones, tablets, …) may not be possible or even wanted. Hence it makes sense to first look at the desired target platforms before making any kind of responsive design efforts.

Creating a responsive design can be achieved in many different ways:

  • Using a fluid layout with relative (e.g., percent) measurements
  • Using modern layout techniques, e.g., Flexbox or Grid layout with adjustments
  • Using screen-size relative media queries
  • Using scripts for more complicated breakpoint logic or container-size relative conditions

There are pros and cons for every point, but it mostly depends on our problem descriptions (e.g., how does the wanted design look like and do we need to support legacy browsers).

Our example follows already a fluid design. We could still make some improvements in this space, but as the focus in this article is more on the connectivity features we’ll skip explicit steps in this area.


Connectivity Independent

Service workers allow work offline, or on low quality networks. Introducing a service worker is quite simple, usually the maintenance / correct use is much harder.

Load while offline (even if only a custom offline page). By implication, this means that progressive web apps require service workers.

A service worker requires two things:

  1. A standalone script that represents the service worker
  2. A part in our main (app) script that registers the service worker (standalone script)

The latter should look similar as

// check for support
if ('serviceWorker' in navigator) {
try {
// calls navigator.serviceWorker.register('sw.js');
registerServiceWorker();
} catch (e) {
console.error(e);
}
}

feature-detection-service-worker.js hosted with ❤ by GitHub

where sw.js refers to the service worker. In the best case sw.js is placed in the root of our application, otherwise it cannot handle all content.

Service workers can only react to events and are unable to access the DOM. The main events we care about are

  • install to find out if a service worker was registered
  • fetch to detect / react properly to network requests

The following diagram illustrates the role of these two events in our web app.

Examples flows using the service worker.

Also, we may want to follow-up on a successful service worker installation.

async function registerServiceWorker() {
try {
const registration = await navigator.serviceWorker.register('sw.js');
// do something with registration, e.g., registration.scope
} catch (e) {
console.error('ServiceWorker failed', e);
}
}

register-service-worker.js hosted with ❤ by GitHub

With respect to the content of the service worker — it can be as simple as listening for an installation and fetch event.

self.addEventListener('install', e => {
// Perform install steps
});

self.addEventListener('fetch', e => {
// Empty for now
});

service-worker-stub.js hosted with ❤ by GitHub

At this stage our application can already run standalone and be added to the homescreen like an app.

Running standalone starts Chrome in a special window mode.

Now it’s time to make the application a little bit more interesting.


Re-Engageable

Make re-engagement easy through features like push notifications. Push notifications are similar to their native counter parts. They may happen when the user does not use our web app and they require explicit permission to do so. They are also limited in size (max. 4 kB) and must be encrypted.

While the permission request is shown automatically once needed, we can also trigger the request manually (recommended):

Notification.requestPermission(result => {
if (result !== 'granted') {
//handle permissions deny
}
});

push-request-permission.js hosted with ❤ by GitHub

In our service worker we can subscribe to new push notifications. For this we use the ability to follow-up on a successful service worker registration:

async function subscribeToPushNotifications(registration) {
const options = {
userVisibleOnly: true,
applicationServerKey: btoa('...'),
};
const subscription = await registration.pushManager.subscribe(options);
//Received subscription
}

subscribe-push.js hosted with ❤ by GitHub

The application server key is the public key to decrypt the messages coming from us. An implementation to enable web push notifications for Node.js is, e.g., Web Push.

Regarding the right value for the applicationServerKey we find the following information in the specification:

A Base64-encoded DOMString or ArrayBuffer containing an ECDSA P-256 public key that the push server will use to authenticate your application server. If specified, all messages from your application server must use the VAPID authentication scheme, and include a JWT signed with the corresponding private key.

Hence, in order for this to work we need to supply a base-64 value matching the public key of our push server. In reality, however, some older browser implementations require an ArrayBuffer. Therefore, the only safe choice is to do the conversion from base64 strings ourselves (the Gist to look for is called urlBase64ToUint8Array).


Fresh

Always up-to-date thanks to the service worker update process. To see the state of a service worker we should use the debugging tools of the browser (e.g., in Chrome via the Application tab). Make sure to check “Update on reload” in development mode, otherwise we need to manually update the registered service worker (avoid “skip waiting” confirmation messages). The underlying reason is that browsers only allow a single active service worker from our page.

Alright without further ado let’s step right into what’s needed to make this happen. First we need to provide some implementation to the install and fetch event. In the simplest form we only add the static files to a cache within the install event.

const files = [
'./',
'./app.js',
'./style.css',
];

self.addEventListener('install', async e => {
const cache = await caches.open('files');
cache.addAll(files);
});

static-service-worker.js hosted with ❤ by GitHub

The caches object gives us an API to create named caches (very useful for debugging and eviction strategies), resolve requests, and explicitly cache files. In this implementation we essentially tell the browser to fetch the URLs from the array and put them into the cache. The service worker itself is implicitly cached.

The fetch event may become really sophisticated. A quite simple implementation for our example project may look as follows:

self.addEventListener('fetch', async e => {
const req = e.request;
const res = isApiCall(req) ? getFromNetwork(req) : getFromCache(req);
await e.respondWith(res);
});

dynamic-service-worker.js hosted with ❤ by GitHub

Nice. So essentially we just determine if we currently fetch a (static) file or make an API call. In the former case, we go directly to the cache, in the latter case we try the network first. Finally, we respond with the given response (which either comes from the cache or the network). The only difference lies in the caching strategy.

The implementation of the network first strategy was done to use another named cache (“data”). The solution is pretty straight forward, the only important point is that fetch in an offline mode will throw an exception and that responses need to be cloned before they can be put into the cache. The reason is that a response can only be read once.

async function getFromNetwork(req) {
const cache = await caches.open('data');

try {
const res = await fetch(req);
cache.put(req, res.clone());
return res;
} catch (e) {
const res = await cache.match(req);
return res || getFallback(req);
}
}

api-service-worker.js hosted with ❤ by GitHub

The getFallback function uses a cache-only strategy, where fallback data that has initially been added to the static files cache is used.

The given solution is not free of problems. If the problem domain is very simple it may work, however, if, for example, we have a growing set of files to handle we need a good cache expiration strategy. Also with multiple API requests and external static files entering our problem domain we may face new challenges.

A nice solution to these potential challenges is workbox-sw from Google. It takes care of the whole updating process and provides a nice abstraction layer over the standard fetch event.


Conclusion

PWAs are nothing more than our standard web apps enhanced by using some of the recently introduced APIs to improve general UX. The name progressive indicates that the technology does not require a hard cut. Actually, we can decide what makes sense and should be included.

If you want to follow the full example with steps feel free to clone and play around with the repository available at GitHub — PWA Example. The README will guide you through the branches.

Have you already enhanced your web apps? Which parts did you like and what is currently missing? What are you favorite libraries when dealing with PWAs? Let us know in the comments!

Thanks for reading ❤

If you liked this post, share it with all of your programming buddies!

Follow me on Facebook | Twitter

Learn More

The Web Developer Bootcamp

Angular 7 (formerly Angular 2) - The Complete Guide

The Complete JavaScript Course 2019: Build Real Projects!

Modern React with Redux [2019 Update]

Vue JS 2 - The Complete Guide (incl. Vue Router & Vuex)

Build Responsive Real World Websites with HTML5 and CSS3

The Complete Web Developer Course 2.0

Build Your First PWA with Angular

Build Progressive Web Apps with React

Progressive Web App vs Native app

PWA Tutorial - Performance Optimization For Progressive Web Apps

Introduction to Service Worker - Progressive Web App Training

Originally published by Florian Rappl at https://blog.logrocket.com

Mobile App Development Company India | Ecommerce Web Development Company India

Mobile App Development Company India | Ecommerce Web Development Company India

Best Mobile App Development Company India, WebClues Global is one of the leading web and mobile app development company. Our team offers complete IT solutions including Cross-Platform App Development, CMS & E-Commerce, and UI/UX Design.

We are custom eCommerce Development Company working with all types of industry verticals and providing them end-to-end solutions for their eCommerce store development.

Know more about Top E-Commerce Web Development Company

Healthcare Mobile App Development | Medical App Development Company

Healthcare Mobile App Development | Medical App Development Company

Healthcare App Development Company- Healthcare, Medical app development experts at Mobiweb offers medical app development and mHealth mobility solutions across the globe.

Mobiweb Technologies is the renowned and trustworthy [Healthcare Mobile App Development company]Healthcare Appspp-development-company/ "Healthcare Mobile App Development company") which can help you to develop your any kind of healthcare related applications and websites. We have a team of highly-skilled and experienced professionals who provides best medical and healthcare solutions that run on many different and large platforms

Enterprise Software | Mobile Apps | Web app Development Company India and USA

CMARIX is a leading technology Outsourcing company with CMMi level 3, ISO 27001, ISO 9001:2015 certifications in India and US that specialize in, Enterprise Software, Mobile Apps and Custom Web Application Development with clients across the globe.

CMARIX is a leading technology Outsourcing company with CMMi level 3, ISO 27001, ISO 9001:2015 certifications in India and US that specialize in, Enterprise Software, Mobile Apps and Custom Web Application Development with clients across the globe.