1670317260
Delete Unused Key Pair From AWS using Boto3
Hi all, today we are going to perform an automation stuff. Using this script we will be going to delete all unused key pair from our AWS account using boto3. By doing this we can ensure that our AWS account remains secure to some extent.
Checking all key pairs
Firstly we will be writing code to see our all key pairs that exist with the aws account. Below is the code.
import boto3
session = boto3.Session()
# Creating empty lists for all, used, and unused key pairs
key_pairs = []
used_key_pairs = []
unused_key_pairs = []
# List the key pairs in the selected region
ec2 = session.client('ec2')
key_pairs = list(map(lambda i: i['KeyName'], ec2.describe_key_pairs()['KeyPairs']))
print(key_pairs)Below is the code output. I am getting awslearning1, check-1 and check-2
output
Below is the picture of my aws account showing the same 3 key pairs.
Listing all Used Key Pair
Now we are going to list all used key pairs.
ec2 = session.client('ec2')
instance_groups = list(map(lambda i: i['Instances'], ec2.describe_instances()['Reservations']))
for group in instance_groups:
for i in group:
if i['KeyName'] not in used_key_pairs:
used_key_pairs.append(i['KeyName'])
print(used_key_pairs)
Below pic shows the code output i am getting. As i only have one used key pair associated with one of my ec2 instance.
Finding and deleting all unused key pairs
Since we have listed listed all key pairs and used key pairs, we can easily fetch unused key pairs. so, we will be first finding that and deleting the unused key pairs.
for key in key_pairs:
if key not in used_key_pairs:
unused_key_pairs.append(key)
print(unused_key_pairs)
Now we have the unused key pairs. Lastly we will be deleting these unused key pairs.
for key in unused_key_pairs:
print(key)
ec2.delete_key_pair(KeyName=key)
The above pic is the code output. You can now see that both unused key pairs have been delete from my aws account.
Ready to gain a competitive advantage with Future Ready Emerging Technologies?
Conclusion
In this blog we have seen how to list all key pairs, used key pairs and finally unused key pairs from your AWS account. For the security purposes it is recommended not to have unused key pairs in your AWS account. After listing unused key pairs , we have learned how to delete them also. All by using boto3 package of python. You can automate this stuff also. For more detalis about key pair please visit https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html
Please visit https://blog.knoldus.com/tag/aws/ for more blogs on AWS
Original article source at: https://blog.knoldus.com/
What is GEEK
Buddha Community
1667425440
Pdf2gerb: Perl Script Converts PDF Files to Gerber format
pdf2gerb
Perl script converts PDF files to Gerber format
Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.
The general workflow is as follows:
- Design the PCB using your favorite CAD or drawing software.
- Print the top and bottom copper and top silk screen layers to a PDF file.
- Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
- Use a Gerber viewer to double-check the output against the original PCB design.
- Make adjustments as needed.
- Submit the files to a PCB manufacturer.
Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).
See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.
pdf2gerb_cfg.pm
#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;
use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)
##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file
use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call
#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software. \nGerber files MAY CONTAIN ERRORS. Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG
use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC
use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)
#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1);
#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
.010, -.001, #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
.031, -.014, #used for vias
.041, -.020, #smallest non-filled plated hole
.051, -.025,
.056, -.029, #useful for IC pins
.070, -.033,
.075, -.040, #heavier leads
# .090, -.043, #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
.100, -.046,
.115, -.052,
.130, -.061,
.140, -.067,
.150, -.079,
.175, -.088,
.190, -.093,
.200, -.100,
.220, -.110,
.160, -.125, #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
.090, -.040, #want a .090 pad option, but use dummy hole size
.065, -.040, #.065 x .065 rect pad
.035, -.040, #.035 x .065 rect pad
#traces:
.001, #too thin for real traces; use only for board outlines
.006, #minimum real trace width; mainly used for text
.008, #mainly used for mid-sized text, not traces
.010, #minimum recommended trace width for low-current signals
.012,
.015, #moderate low-voltage current
.020, #heavier trace for power, ground (even if a lighter one is adequate)
.025,
.030, #heavy-current traces; be careful with these ones!
.040,
.050,
.060,
.080,
.100,
.120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);
#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size: parsed PDF diameter: error:
# .014 .016 +.002
# .020 .02267 +.00267
# .025 .026 +.001
# .029 .03167 +.00267
# .033 .036 +.003
# .040 .04267 +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};
#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
CIRCLE_ADJUST_MINX => 0,
CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
CIRCLE_ADJUST_MAXY => 0,
SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};
#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches
#line join/cap styles:
use constant
{
CAP_NONE => 0, #butt (none); line is exact length
CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
#number of elements in each shape type:
use constant
{
RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
rect => RECT_SHAPELEN,
line => LINE_SHAPELEN,
curve => CURVE_SHAPELEN,
circle => CIRCLE_SHAPELEN,
);
#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions
# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?
#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes.
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes
#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches
# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)
# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time
# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const
use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool
my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time
print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load
#############################################################################################
#junk/experiment:
#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html
#my $caller = "pdf2gerb::";
#sub cfg
#{
# my $proto = shift;
# my $class = ref($proto) || $proto;
# my $settings =
# {
# $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
# };
# bless($settings, $class);
# return $settings;
#}
#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;
#print STDERR "read cfg file\n";
#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names
#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }Download Details:
Author: swannman
Source Code: https://github.com/swannman/pdf2gerb
License: GPL-3.0 license
1595201363
Php how to delete multiple rows through checkbox using ajax in laravel
First thing, we will need a table and i am creating products table for this example. So run the following query to create table.
CREATE TABLE `products` (
`id` int(10) unsigned NOT NULL AUTO_INCREMENT,
`name` varchar(255) COLLATE utf8mb4_unicode_ci NOT NULL,
`description` varchar(255) COLLATE utf8mb4_unicode_ci DEFAULT NULL,
`created_at` timestamp NULL DEFAULT CURRENT_TIMESTAMP,
`updated_at` datetime DEFAULT NULL,
PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=7 DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_unicode_ci
Next, we will need to insert some dummy records in this table that will be deleted.
INSERT INTO `products` (`name`, `description`) VALUES
('Test product 1', 'Product description example1'),
('Test product 2', 'Product description example2'),
('Test product 3', 'Product description example3'),
('Test product 4', 'Product description example4'),
('Test product 5', 'Product description example5');
Now we are redy to create a model corresponding to this products table. Here we will create Product model. So let’s create a model file Product.php file under app directory and put the code below.
<?php
namespace App;
use Illuminate\Database\Eloquent\Model;
class Product extends Model
{
protected $fillable = [
'name','description'
];
}
Step 2: Create Route
Now, in this second step we will create some routes to handle the request for this example. So opeen routes/web.php file and copy the routes as given below.
routes/web.php
Route::get('product', 'ProductController@index');
Route::delete('product/{id}', ['as'=>'product.destroy','uses'=>'ProductController@destroy']);
Route::delete('delete-multiple-product', ['as'=>'product.multiple-delete','uses'=>'ProductController@deleteMultiple']);
#laravel #delete multiple rows in laravel using ajax #laravel ajax delete #laravel ajax multiple checkbox delete #laravel delete multiple rows #laravel delete records using ajax #laravel multiple checkbox delete rows #laravel multiple delete
1670317260
Delete Unused Key Pair From AWS using Boto3
Hi all, today we are going to perform an automation stuff. Using this script we will be going to delete all unused key pair from our AWS account using boto3. By doing this we can ensure that our AWS account remains secure to some extent.
Checking all key pairs
Firstly we will be writing code to see our all key pairs that exist with the aws account. Below is the code.
import boto3
session = boto3.Session()
# Creating empty lists for all, used, and unused key pairs
key_pairs = []
used_key_pairs = []
unused_key_pairs = []
# List the key pairs in the selected region
ec2 = session.client('ec2')
key_pairs = list(map(lambda i: i['KeyName'], ec2.describe_key_pairs()['KeyPairs']))
print(key_pairs)Below is the code output. I am getting awslearning1, check-1 and check-2
output
Below is the picture of my aws account showing the same 3 key pairs.
Listing all Used Key Pair
Now we are going to list all used key pairs.
ec2 = session.client('ec2')
instance_groups = list(map(lambda i: i['Instances'], ec2.describe_instances()['Reservations']))
for group in instance_groups:
for i in group:
if i['KeyName'] not in used_key_pairs:
used_key_pairs.append(i['KeyName'])
print(used_key_pairs)
Below pic shows the code output i am getting. As i only have one used key pair associated with one of my ec2 instance.
Finding and deleting all unused key pairs
Since we have listed listed all key pairs and used key pairs, we can easily fetch unused key pairs. so, we will be first finding that and deleting the unused key pairs.
for key in key_pairs:
if key not in used_key_pairs:
unused_key_pairs.append(key)
print(unused_key_pairs)
Now we have the unused key pairs. Lastly we will be deleting these unused key pairs.
for key in unused_key_pairs:
print(key)
ec2.delete_key_pair(KeyName=key)
The above pic is the code output. You can now see that both unused key pairs have been delete from my aws account.
Ready to gain a competitive advantage with Future Ready Emerging Technologies?
Conclusion
In this blog we have seen how to list all key pairs, used key pairs and finally unused key pairs from your AWS account. For the security purposes it is recommended not to have unused key pairs in your AWS account. After listing unused key pairs , we have learned how to delete them also. All by using boto3 package of python. You can automate this stuff also. For more detalis about key pair please visit https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-key-pairs.html
Please visit https://blog.knoldus.com/tag/aws/ for more blogs on AWS
Original article source at: https://blog.knoldus.com/
1598408880
How To Unite AWS KMS with Serverless Application Model (SAM)
The Basics
AWS KMS is a Key Management Service that let you create Cryptographic keys that you can use to encrypt and decrypt data and also other keys. You can read more about it here.
Important points about Keys
Please note that the customer master keys(CMK) generated can only be used to encrypt small amount of data like passwords, RSA key. You can use AWS KMS CMKs to generate, encrypt, and decrypt data keys. However, AWS KMS does not store, manage, or track your data keys, or perform cryptographic operations with data keys.
You must use and manage data keys outside of AWS KMS. KMS API uses AWS KMS CMK in the encryption operations and they cannot accept more than 4 KB (4096 bytes) of data. To encrypt application data, use the server-side encryption features of an AWS service, or a client-side encryption library, such as the AWS Encryption SDK or the Amazon S3 encryption client.
Scenario
We want to create signup and login forms for a website.
Passwords should be encrypted and stored in DynamoDB database.
What do we need?
- KMS key to encrypt and decrypt data
- DynamoDB table to store password.
- Lambda functions & APIs to process Login and Sign up forms.
- Sign up/ Login forms in HTML.
Lets Implement it as Serverless Application Model (SAM)!
Lets first create the Key that we will use to encrypt and decrypt password.
KmsKey:
Type: AWS::KMS::Key
Properties:
Description: CMK for encrypting and decrypting
KeyPolicy:
Version: '2012-10-17'
Id: key-default-1
Statement:
- Sid: Enable IAM User Permissions
Effect: Allow
Principal:
AWS: !Sub arn:aws:iam::${AWS::AccountId}:root
Action: kms:*
Resource: '*'
- Sid: Allow administration of the key
Effect: Allow
Principal:
AWS: !Sub arn:aws:iam::${AWS::AccountId}:user/${KeyAdmin}
Action:
- kms:Create*
- kms:Describe*
- kms:Enable*
- kms:List*
- kms:Put*
- kms:Update*
- kms:Revoke*
- kms:Disable*
- kms:Get*
- kms:Delete*
- kms:ScheduleKeyDeletion
- kms:CancelKeyDeletion
Resource: '*'
- Sid: Allow use of the key
Effect: Allow
Principal:
AWS: !Sub arn:aws:iam::${AWS::AccountId}:user/${KeyUser}
Action:
- kms:DescribeKey
- kms:Encrypt
- kms:Decrypt
- kms:ReEncrypt*
- kms:GenerateDataKey
- kms:GenerateDataKeyWithoutPlaintext
Resource: '*'
The important thing in above snippet is the KeyPolicy. KMS requires a Key Administrator and Key User. As a best practice your Key Administrator and Key User should be 2 separate user in your Organisation. We are allowing all permissions to the root users.
So if your key Administrator leaves the organisation, the root user will be able to delete this key. As you can see **KeyAdmin **can manage the key but not use it and KeyUser can only use the key. ${KeyAdmin} and **${KeyUser} **are parameters in the SAM template.
You would be asked to provide values for these parameters during SAM Deploy.
#aws #serverless #aws-sam #aws-key-management-service #aws-certification #aws-api-gateway #tutorial-for-beginners #aws-blogs
1601341562
AWS Cost Allocation Tags and Cost Reduction
Bob had just arrived in the office for his first day of work as the newly hired chief technical officer when he was called into a conference room by the president, Martha, who immediately introduced him to the head of accounting, Amanda. They exchanged pleasantries, and then Martha got right down to business:
“Bob, we have several teams here developing software applications on Amazon and our bill is very high. We think it’s unnecessarily high, and we’d like you to look into it and bring it under control.”
Martha placed a screenshot of the Amazon Web Services (AWS) billing report on the table and pointed to it.
“This is a problem for us: We don’t know what we’re spending this money on, and we need to see more detail.”
Amanda chimed in, “Bob, look, we have financial dimensions that we use for reporting purposes, and I can provide you with some guidance regarding some information we’d really like to see such that the reports that are ultimately produced mirror these dimensions — if you can do this, it would really help us internally.”
“Bob, we can’t stress how important this is right now. These projects are becoming very expensive for our business,” Martha reiterated.
“How many projects do we have?” Bob inquired.
“We have four projects in total: two in the aviation division and two in the energy division. If it matters, the aviation division has 75 developers and the energy division has 25 developers,” the CEO responded.
Bob understood the problem and responded, “I’ll see what I can do and have some ideas. I might not be able to give you retrospective insight, but going forward, we should be able to get a better idea of what’s going on and start to bring the cost down.”
The meeting ended with Bob heading to find his desk. Cost allocation tags should help us, he thought to himself as he looked for someone who might know where his office is.
#aws #aws cloud #node js #cost optimization #aws cli #well architected framework #aws cost report #cost control #aws cost #aws tags