Mike  Kozey

Mike Kozey

1657524780

A Library That Aims to Make It Simple To Use The BLoC Design Pattern

bloc_small

Getting Started

A library that aims to make it simple to use the BLoC design pattern to separate presentation code from business logic and state. While this library aims to make the project 100% compliant with the BLoC pattern, it also acknowledges that 100% compliance is not always advisable or necessary. This library has been customized to make BloC easier to understand, avoid useless function calls, and focus on solving logic.

How to use

class CounterBloc {
  var _counter = Bloc<int>.broadcast(initialValue: 0);

  void incrementCounter() {
    _counter.add(_counter.value + 1);
  }

  void decrementCounter() {
    if (_counter.value > 0) _counter.add(_counter.value - 1);
  }

  void dispose() {
    _counter.dispose();
  }
}

The bloc can now be used elsewhere in the project:

  final bloc = CounterBloc();

  @override
  void initState() {
    // TODO: implement initState
    super.initState();
  }

  @override
  void dispose() {
    // TODO: implement dispose
    super.dispose();
    bloc.dispose();
  }

wrap it with StreamBuilder to listen for changed events and return data:

  StreamBuilder<int>(
                initialData: bloc._counter.value,
                stream: bloc._counter.stream,
                builder: (context, snapshot) {
                  return Text(
                    '${snapshot.data}',
                    style: Theme.of(context).textTheme.headline4,
                  );
                }),

  floatingActionButton: Wrap(
    spacing: 5,
    children: [
      FloatingActionButton(
        onPressed: bloc.incrementCounter, //__counter + 1
        tooltip: 'Increment',
      child: Icon(Icons.add),
    ),
      FloatingActionButton(
        onPressed: bloc.decrementCounter, //__counter - 1
        tooltip: 'decrement',
        child: Icon(Icons.remove),
    ),
  ],
), //

Installing

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add bloc_small

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:
  bloc_small: ^0.0.3

Alternatively, your editor might support flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:bloc_small/bloc_small.dart';

example/lib/main.dart

import 'package:flutter/material.dart';
import 'dart:async';

import 'package:flutter/services.dart';
import 'package:bloc_small/bloc_small.dart';

void main() {
  runApp(MyApp());
}

class MyApp extends StatelessWidget {
  // This widget is the root of your application.
  @override
  Widget build(BuildContext context) {
    return MaterialApp(
      title: 'Flutter Demo',
      theme: ThemeData(
        // This is the theme of your application.
        //
        // Try running your application with "flutter run". You'll see the
        // application has a blue toolbar. Then, without quitting the app, try
        // changing the primarySwatch below to Colors.green and then invoke
        // "hot reload" (press "r" in the console where you ran "flutter run",
        // or simply save your changes to "hot reload" in a Flutter IDE).
        // Notice that the counter didn't reset back to zero; the application
        // is not restarted.
        primarySwatch: Colors.blue,
      ),
      home: MyHomePage(title: 'Flutter Demo Home Page'),
    );
  }
}

class MyHomePage extends StatefulWidget {
  MyHomePage({Key key, this.title}) : super(key: key);

  // This widget is the home page of your application. It is stateful, meaning
  // that it has a State object (defined below) that contains fields that affect
  // how it looks.

  // This class is the configuration for the state. It holds the values (in this
  // case the title) provided by the parent (in this case the App widget) and
  // used by the build method of the State. Fields in a Widget subclass are
  // always marked "final".

  final String title;

  @override
  _MyHomePageState createState() => _MyHomePageState();
}

class CounterBloc {
  var _counter = Bloc<int>.broadcast(initialValue: 0);

  void incrementCounter() {
    _counter.add(_counter.value + 1);
  }

  void decrementCounter() {
    if (_counter.value > 0) _counter.add(_counter.value - 1);
  }

  void dispose() {
    _counter.dispose();
  }
}

class _MyHomePageState extends State<MyHomePage> {
  final bloc = CounterBloc();

  @override
  void initState() {
    // TODO: implement initState
    super.initState();
  }

  @override
  void dispose() {
    // TODO: implement dispose
    super.dispose();
    bloc.dispose();
  }

  @override
  Widget build(BuildContext context) {
    // This method is rerun every time setState is called, for instance as done
    // by the _incrementCounter method above.
    //
    // The Flutter framework has been optimized to make rerunning build methods
    // fast, so that you can just rebuild anything that needs updating rather
    // than having to individually change instances of widgets.
    return Scaffold(
      appBar: AppBar(
        // Here we take the value from the MyHomePage object that was created by
        // the App.build method, and use it to set our appbar title.
        title: Text(widget.title),
      ),
      body: Center(
        // Center is a layout widget. It takes a single child and positions it
        // in the middle of the parent.
        child: Column(
          // Column is also a layout widget. It takes a list of children and
          // arranges them vertically. By default, it sizes itself to fit its
          // children horizontally, and tries to be as tall as its parent.
          //
          // Invoke "debug painting" (press "p" in the console, choose the
          // "Toggle Debug Paint" action from the Flutter Inspector in Android
          // Studio, or the "Toggle Debug Paint" command in Visual Studio Code)
          // to see the wireframe for each widget.
          //
          // Column has various properties to control how it sizes itself and
          // how it positions its children. Here we use mainAxisAlignment to
          // center the children vertically; the main axis here is the vertical
          // axis because Columns are vertical (the cross axis would be
          // horizontal).
          mainAxisAlignment: MainAxisAlignment.center,
          children: <Widget>[
            Text(
              'You have pushed the button this many times:',
            ),
            StreamBuilder<int>(
                initialData: bloc._counter.value,
                stream: bloc._counter.stream,
                builder: (context, snapshot) {
                  return Text(
                    '${snapshot.data}',
                    style: Theme.of(context).textTheme.headline4,
                  );
                }),
          ],
        ),
      ),
      floatingActionButton: Wrap(
        spacing: 5,
        children: [
          FloatingActionButton(
            onPressed: bloc.incrementCounter,
            tooltip: 'Increment',
            child: Icon(Icons.add),
          ),
          FloatingActionButton(
            onPressed: bloc.decrementCounter,
            tooltip: 'decrement',
            child: Icon(Icons.remove),
          ),
        ],
      ), // This trailing comma makes auto-formatting nicer for build methods.
    );
  }
}

Original article source at: https://pub.dev/packages/bloc_small

#flutter #dart #bloc 

What is GEEK

Buddha Community

A Library That Aims to Make It Simple To Use The BLoC Design Pattern
Chloe  Butler

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

  1. Design the PCB using your favorite CAD or drawing software.
  2. Print the top and bottom copper and top silk screen layers to a PDF file.
  3. Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
  4. Use a Gerber viewer to double-check the output against the original PCB design.
  5. Make adjustments as needed.
  6. Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.


pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl 

Samanta  Moore

Samanta Moore

1623835440

Builder Design Pattern

What is Builder Design Pattern ? Why we should care about it ?

Starting from **Creational Design Pattern, **so wikipedia says “creational design pattern are design pattern that deals with object creation mechanism, trying to create objects in manner that is suitable to the situation”.

The basic form of object creations could result in design problems and result in complex design problems, so to overcome this problem Creational Design Pattern somehow allows you to create the object.

Builder is one of the** Creational Design Pattern**.

When to consider the Builder Design Pattern ?

Builder is useful when you need to do lot of things to build an Object. Let’s imagine DOM (Document Object Model), so if we need to create the DOM, We could have to do lot of things, appending plenty of nodes and attaching attributes to them. We could also imagine about the huge XML Object creation where we will have to do lot of work to create the Object. A Factory is used basically when we could create the entire object in one shot.

As **Joshua Bloch (**He led the Design of the many library Java Collections Framework and many more) – “Builder Pattern is good choice when designing the class whose constructor or static factories would have more than handful of parameters

#java #builder #builder pattern #creational design pattern #design pattern #factory pattern #java design pattern

Juned Ghanchi

1621315250

Designing Mobile Apps using the latest UI Design Principles

The mobile technology world is growing at the speed of light, and the apps have become an integral part of our daily life. We can now see an influx of technology with tools that can help create mobile apps. All of them are becoming more accessible and hence people are getting on their first app making journeys. Since the mobile app industry is getting bigger and better than ever, businesses from all corners of the world are trying to develop mobile apps for their operations and marketing. Designing a mobile app for businesses is the first step, though. Company owners are in charge of the basic look and feel of the designed product. With a brilliant mobile app design, one can establish a relationship between app and user very well.

Read Blog Here: https://www.indianappdevelopers.com/blog/designing-mobile-apps-using-latest-ui-design-principles/

#designing mobile apps #ui design principles #mobile ui design #mobile app design #ui design #app design

Mike  Kozey

Mike Kozey

1657524780

A Library That Aims to Make It Simple To Use The BLoC Design Pattern

bloc_small

Getting Started

A library that aims to make it simple to use the BLoC design pattern to separate presentation code from business logic and state. While this library aims to make the project 100% compliant with the BLoC pattern, it also acknowledges that 100% compliance is not always advisable or necessary. This library has been customized to make BloC easier to understand, avoid useless function calls, and focus on solving logic.

How to use

class CounterBloc {
  var _counter = Bloc<int>.broadcast(initialValue: 0);

  void incrementCounter() {
    _counter.add(_counter.value + 1);
  }

  void decrementCounter() {
    if (_counter.value > 0) _counter.add(_counter.value - 1);
  }

  void dispose() {
    _counter.dispose();
  }
}

The bloc can now be used elsewhere in the project:

  final bloc = CounterBloc();

  @override
  void initState() {
    // TODO: implement initState
    super.initState();
  }

  @override
  void dispose() {
    // TODO: implement dispose
    super.dispose();
    bloc.dispose();
  }

wrap it with StreamBuilder to listen for changed events and return data:

  StreamBuilder<int>(
                initialData: bloc._counter.value,
                stream: bloc._counter.stream,
                builder: (context, snapshot) {
                  return Text(
                    '${snapshot.data}',
                    style: Theme.of(context).textTheme.headline4,
                  );
                }),

  floatingActionButton: Wrap(
    spacing: 5,
    children: [
      FloatingActionButton(
        onPressed: bloc.incrementCounter, //__counter + 1
        tooltip: 'Increment',
      child: Icon(Icons.add),
    ),
      FloatingActionButton(
        onPressed: bloc.decrementCounter, //__counter - 1
        tooltip: 'decrement',
        child: Icon(Icons.remove),
    ),
  ],
), //

Installing

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add bloc_small

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:
  bloc_small: ^0.0.3

Alternatively, your editor might support flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:bloc_small/bloc_small.dart';

example/lib/main.dart

import 'package:flutter/material.dart';
import 'dart:async';

import 'package:flutter/services.dart';
import 'package:bloc_small/bloc_small.dart';

void main() {
  runApp(MyApp());
}

class MyApp extends StatelessWidget {
  // This widget is the root of your application.
  @override
  Widget build(BuildContext context) {
    return MaterialApp(
      title: 'Flutter Demo',
      theme: ThemeData(
        // This is the theme of your application.
        //
        // Try running your application with "flutter run". You'll see the
        // application has a blue toolbar. Then, without quitting the app, try
        // changing the primarySwatch below to Colors.green and then invoke
        // "hot reload" (press "r" in the console where you ran "flutter run",
        // or simply save your changes to "hot reload" in a Flutter IDE).
        // Notice that the counter didn't reset back to zero; the application
        // is not restarted.
        primarySwatch: Colors.blue,
      ),
      home: MyHomePage(title: 'Flutter Demo Home Page'),
    );
  }
}

class MyHomePage extends StatefulWidget {
  MyHomePage({Key key, this.title}) : super(key: key);

  // This widget is the home page of your application. It is stateful, meaning
  // that it has a State object (defined below) that contains fields that affect
  // how it looks.

  // This class is the configuration for the state. It holds the values (in this
  // case the title) provided by the parent (in this case the App widget) and
  // used by the build method of the State. Fields in a Widget subclass are
  // always marked "final".

  final String title;

  @override
  _MyHomePageState createState() => _MyHomePageState();
}

class CounterBloc {
  var _counter = Bloc<int>.broadcast(initialValue: 0);

  void incrementCounter() {
    _counter.add(_counter.value + 1);
  }

  void decrementCounter() {
    if (_counter.value > 0) _counter.add(_counter.value - 1);
  }

  void dispose() {
    _counter.dispose();
  }
}

class _MyHomePageState extends State<MyHomePage> {
  final bloc = CounterBloc();

  @override
  void initState() {
    // TODO: implement initState
    super.initState();
  }

  @override
  void dispose() {
    // TODO: implement dispose
    super.dispose();
    bloc.dispose();
  }

  @override
  Widget build(BuildContext context) {
    // This method is rerun every time setState is called, for instance as done
    // by the _incrementCounter method above.
    //
    // The Flutter framework has been optimized to make rerunning build methods
    // fast, so that you can just rebuild anything that needs updating rather
    // than having to individually change instances of widgets.
    return Scaffold(
      appBar: AppBar(
        // Here we take the value from the MyHomePage object that was created by
        // the App.build method, and use it to set our appbar title.
        title: Text(widget.title),
      ),
      body: Center(
        // Center is a layout widget. It takes a single child and positions it
        // in the middle of the parent.
        child: Column(
          // Column is also a layout widget. It takes a list of children and
          // arranges them vertically. By default, it sizes itself to fit its
          // children horizontally, and tries to be as tall as its parent.
          //
          // Invoke "debug painting" (press "p" in the console, choose the
          // "Toggle Debug Paint" action from the Flutter Inspector in Android
          // Studio, or the "Toggle Debug Paint" command in Visual Studio Code)
          // to see the wireframe for each widget.
          //
          // Column has various properties to control how it sizes itself and
          // how it positions its children. Here we use mainAxisAlignment to
          // center the children vertically; the main axis here is the vertical
          // axis because Columns are vertical (the cross axis would be
          // horizontal).
          mainAxisAlignment: MainAxisAlignment.center,
          children: <Widget>[
            Text(
              'You have pushed the button this many times:',
            ),
            StreamBuilder<int>(
                initialData: bloc._counter.value,
                stream: bloc._counter.stream,
                builder: (context, snapshot) {
                  return Text(
                    '${snapshot.data}',
                    style: Theme.of(context).textTheme.headline4,
                  );
                }),
          ],
        ),
      ),
      floatingActionButton: Wrap(
        spacing: 5,
        children: [
          FloatingActionButton(
            onPressed: bloc.incrementCounter,
            tooltip: 'Increment',
            child: Icon(Icons.add),
          ),
          FloatingActionButton(
            onPressed: bloc.decrementCounter,
            tooltip: 'decrement',
            child: Icon(Icons.remove),
          ),
        ],
      ), // This trailing comma makes auto-formatting nicer for build methods.
    );
  }
}

Original article source at: https://pub.dev/packages/bloc_small

#flutter #dart #bloc 

Joseph  Murray

Joseph Murray

1624442940

Prototype Design Pattern - Java

Prototype design pattern tutorial

Definition of Prototype pattern

The prototype pattern is a creational design pattern in software development. It is used when the type of objects to create is determined by a prototypical instance, which is cloned to produce new objects.

Where to use the Prototype pattern

If the cost for creating a new object is expensive and costs resources.

#java #design-patterns #code #tutorial #prototype-design-pattern #design pattern