Tyshawn  Braun

Tyshawn Braun


Pandas on Steroids: Dask- End to End Data Science with python code

As the saying goes, a data scientist spends 90% of their time in cleaning data and 10% in complaining about the data. Their complaints may range from data size, faulty data distributions, Null values, data randomness, systematic errors in data capture, differences between train and test sets and the list just goes on and on.

One common bottleneck theme is the enormity of data size where either the data doesn’t fit into memory or the processing time is so large(In order of multi-mins) that the inherent pattern analysis goes for a toss. Data scientists by nature are curious human beings who want to identify and interpret patterns normally hidden from cursory Drag-N-Drop glance. They need to wear multiple hats and make the data confess via repeated tortures(read iterations 😂 )

They wear multiple hats during exploratory data analysis and from a minimal dataset with 6 columns on New York Taxi Fare dataset( https://www.kaggle.com/c/new-york-city-taxi-fare-prediction) - ID, Fare, Time of Trip, Passengers and Location, their questions may range from:

1. How the fares have changed Year-Over-Year?

2. Has the number of trips increased across the years?

3. Do people prefer traveling alone or they have company?

4. Has the small distance rides increased as people have become lazier?

5. What time of the day and day of week do people want to travel?

6. Is there emergence of new hotspots in the city recently except the regular Air Port pickup and drop?

7. Are people taking more inter-city trips?

8. Has the traffic increased leading to more fares/time taken for the same distances?

9. Are there cluster of pick-up and Drop points or areas which see high traffic?

10. Are there outliers in data i.e 0 distance and fare of $100+ and so on?

11. Do the demand change during Holiday season and airport trips increase?

12. Is there any correlation of weather i.e rain or snow with the taxi demand?

#big-data #python #parallel-processing #dask #data-science

What is GEEK

Buddha Community

Pandas on Steroids: Dask- End to End Data Science with python code
Hermann  Frami

Hermann Frami


A Simple Wrapper Around Amplify AppSync Simulator

This serverless plugin is a wrapper for amplify-appsync-simulator made for testing AppSync APIs built with serverless-appsync-plugin.


npm install serverless-appsync-simulator
# or
yarn add serverless-appsync-simulator


This plugin relies on your serverless yml file and on the serverless-offline plugin.

  - serverless-dynamodb-local # only if you need dynamodb resolvers and you don't have an external dynamodb
  - serverless-appsync-simulator
  - serverless-offline

Note: Order is important serverless-appsync-simulator must go before serverless-offline

To start the simulator, run the following command:

sls offline start

You should see in the logs something like:

Serverless: AppSync endpoint: http://localhost:20002/graphql
Serverless: GraphiQl: http://localhost:20002


Put options under custom.appsync-simulator in your serverless.yml file

| option | default | description | | ------------------------ | -------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------- | | apiKey | 0123456789 | When using API_KEY as authentication type, the key to authenticate to the endpoint. | | port | 20002 | AppSync operations port; if using multiple APIs, the value of this option will be used as a starting point, and each other API will have a port of lastPort + 10 (e.g. 20002, 20012, 20022, etc.) | | wsPort | 20003 | AppSync subscriptions port; if using multiple APIs, the value of this option will be used as a starting point, and each other API will have a port of lastPort + 10 (e.g. 20003, 20013, 20023, etc.) | | location | . (base directory) | Location of the lambda functions handlers. | | refMap | {} | A mapping of resource resolutions for the Ref function | | getAttMap | {} | A mapping of resource resolutions for the GetAtt function | | importValueMap | {} | A mapping of resource resolutions for the ImportValue function | | functions | {} | A mapping of external functions for providing invoke url for external fucntions | | dynamoDb.endpoint | http://localhost:8000 | Dynamodb endpoint. Specify it if you're not using serverless-dynamodb-local. Otherwise, port is taken from dynamodb-local conf | | dynamoDb.region | localhost | Dynamodb region. Specify it if you're connecting to a remote Dynamodb intance. | | dynamoDb.accessKeyId | DEFAULT_ACCESS_KEY | AWS Access Key ID to access DynamoDB | | dynamoDb.secretAccessKey | DEFAULT_SECRET | AWS Secret Key to access DynamoDB | | dynamoDb.sessionToken | DEFAULT_ACCESS_TOKEEN | AWS Session Token to access DynamoDB, only if you have temporary security credentials configured on AWS | | dynamoDb.* | | You can add every configuration accepted by DynamoDB SDK | | rds.dbName | | Name of the database | | rds.dbHost | | Database host | | rds.dbDialect | | Database dialect. Possible values (mysql | postgres) | | rds.dbUsername | | Database username | | rds.dbPassword | | Database password | | rds.dbPort | | Database port | | watch | - *.graphql
- *.vtl | Array of glob patterns to watch for hot-reloading. |


    location: '.webpack/service' # use webpack build directory
      endpoint: 'http://my-custom-dynamo:8000'


By default, the simulator will hot-relad when changes to *.graphql or *.vtl files are detected. Changes to *.yml files are not supported (yet? - this is a Serverless Framework limitation). You will need to restart the simulator each time you change yml files.

Hot-reloading relies on watchman. Make sure it is installed on your system.

You can change the files being watched with the watch option, which is then passed to watchman as the match expression.


      - ["match", "handlers/**/*.vtl", "wholename"] # => array is interpreted as the literal match expression
      - "*.graphql"                                 # => string like this is equivalent to `["match", "*.graphql"]`

Or you can opt-out by leaving an empty array or set the option to false

Note: Functions should not require hot-reloading, unless you are using a transpiler or a bundler (such as webpack, babel or typescript), un which case you should delegate hot-reloading to that instead.

Resource CloudFormation functions resolution

This plugin supports some resources resolution from the Ref, Fn::GetAtt and Fn::ImportValue functions in your yaml file. It also supports some other Cfn functions such as Fn::Join, Fb::Sub, etc.

Note: Under the hood, this features relies on the cfn-resolver-lib package. For more info on supported cfn functions, refer to the documentation

Basic usage

You can reference resources in your functions' environment variables (that will be accessible from your lambda functions) or datasource definitions. The plugin will automatically resolve them for you.

      Ref: MyBucket # resolves to `my-bucket-name`

      Type: AWS::DynamoDB::Table
        TableName: myTable
      Type: AWS::S3::Bucket
        BucketName: my-bucket-name

# in your appsync config
    name: dynamosource
        Ref: MyDbTable # resolves to `myTable`

Override (or mock) values

Sometimes, some references cannot be resolved, as they come from an Output from Cloudformation; or you might want to use mocked values in your local environment.

In those cases, you can define (or override) those values using the refMap, getAttMap and importValueMap options.

  • refMap takes a mapping of resource name to value pairs
  • getAttMap takes a mapping of resource name to attribute/values pairs
  • importValueMap takes a mapping of import name to values pairs


      # Override `MyDbTable` resolution from the previous example.
      MyDbTable: 'mock-myTable'
      # define ElasticSearchInstance DomainName
        DomainEndpoint: 'localhost:9200'
      other-service-api-url: 'https://other.api.url.com/graphql'

# in your appsync config
    name: elasticsource
      # endpoint resolves as 'http://localhost:9200'
          - ''
          - - https://
            - Fn::GetAtt:
                - ElasticSearchInstance
                - DomainEndpoint

Key-value mock notation

In some special cases you will need to use key-value mock nottation. Good example can be case when you need to include serverless stage value (${self:provider.stage}) in the import name.

This notation can be used with all mocks - refMap, getAttMap and importValueMap

      Fn::ImportValue: other-service-api-${self:provider.stage}-url

      - key: other-service-api-${self:provider.stage}-url
        value: 'https://other.api.url.com/graphql'


This plugin only tries to resolve the following parts of the yml tree:

  • provider.environment
  • functions[*].environment
  • custom.appSync

If you have the need of resolving others, feel free to open an issue and explain your use case.

For now, the supported resources to be automatically resovled by Ref: are:

  • DynamoDb tables
  • S3 Buckets

Feel free to open a PR or an issue to extend them as well.

External functions

When a function is not defined withing the current serverless file you can still call it by providing an invoke url which should point to a REST method. Make sure you specify "get" or "post" for the method. Default is "get", but you probably want "post".

        url: http://localhost:3016/2015-03-31/functions/addUser/invocations
        method: post
        url: https://jsonplaceholder.typicode.com/posts
        method: post

Supported Resolver types

This plugin supports resolvers implemented by amplify-appsync-simulator, as well as custom resolvers.

From Aws Amplify:

  • NONE

Implemented by this plugin

  • HTTP

Relational Database

Sample VTL for a create mutation

#set( $cols = [] )
#set( $vals = [] )
#foreach( $entry in $ctx.args.input.keySet() )
  #set( $regex = "([a-z])([A-Z]+)")
  #set( $replacement = "$1_$2")
  #set( $toSnake = $entry.replaceAll($regex, $replacement).toLowerCase() )
  #set( $discard = $cols.add("$toSnake") )
  #if( $util.isBoolean($ctx.args.input[$entry]) )
      #if( $ctx.args.input[$entry] )
        #set( $discard = $vals.add("1") )
        #set( $discard = $vals.add("0") )
      #set( $discard = $vals.add("'$ctx.args.input[$entry]'") )
#set( $valStr = $vals.toString().replace("[","(").replace("]",")") )
#set( $colStr = $cols.toString().replace("[","(").replace("]",")") )
#if ( $valStr.substring(0, 1) != '(' )
  #set( $valStr = "($valStr)" )
#if ( $colStr.substring(0, 1) != '(' )
  #set( $colStr = "($colStr)" )
  "version": "2018-05-29",
  "statements":   ["INSERT INTO <name-of-table> $colStr VALUES $valStr", "SELECT * FROM    <name-of-table> ORDER BY id DESC LIMIT 1"]

Sample VTL for an update mutation

#set( $update = "" )
#set( $equals = "=" )
#foreach( $entry in $ctx.args.input.keySet() )
  #set( $cur = $ctx.args.input[$entry] )
  #set( $regex = "([a-z])([A-Z]+)")
  #set( $replacement = "$1_$2")
  #set( $toSnake = $entry.replaceAll($regex, $replacement).toLowerCase() )
  #if( $util.isBoolean($cur) )
      #if( $cur )
        #set ( $cur = "1" )
        #set ( $cur = "0" )
  #if ( $util.isNullOrEmpty($update) )
      #set($update = "$toSnake$equals'$cur'" )
      #set($update = "$update,$toSnake$equals'$cur'" )
  "version": "2018-05-29",
  "statements":   ["UPDATE <name-of-table> SET $update WHERE id=$ctx.args.input.id", "SELECT * FROM <name-of-table> WHERE id=$ctx.args.input.id"]

Sample resolver for delete mutation

  "version": "2018-05-29",
  "statements":   ["UPDATE <name-of-table> set deleted_at=NOW() WHERE id=$ctx.args.id", "SELECT * FROM <name-of-table> WHERE id=$ctx.args.id"]

Sample mutation response VTL with support for handling AWSDateTime

#set ( $index = -1)
#set ( $result = $util.parseJson($ctx.result) )
#set ( $meta = $result.sqlStatementResults[1].columnMetadata)
#foreach ($column in $meta)
    #set ($index = $index + 1)
    #if ( $column["typeName"] == "timestamptz" )
        #set ($time = $result["sqlStatementResults"][1]["records"][0][$index]["stringValue"] )
        #set ( $nowEpochMillis = $util.time.parseFormattedToEpochMilliSeconds("$time.substring(0,19)+0000", "yyyy-MM-dd HH:mm:ssZ") )
        #set ( $isoDateTime = $util.time.epochMilliSecondsToISO8601($nowEpochMillis) )
        $util.qr( $result["sqlStatementResults"][1]["records"][0][$index].put("stringValue", "$isoDateTime") )
#set ( $res = $util.parseJson($util.rds.toJsonString($util.toJson($result)))[1][0] )
#set ( $response = {} )
#foreach($mapKey in $res.keySet())
    #set ( $s = $mapKey.split("_") )
    #set ( $camelCase="" )
    #set ( $isFirst=true )
    #foreach($entry in $s)
        #if ( $isFirst )
          #set ( $first = $entry.substring(0,1) )
          #set ( $first = $entry.substring(0,1).toUpperCase() )
        #set ( $isFirst=false )
        #set ( $stringLength = $entry.length() )
        #set ( $remaining = $entry.substring(1, $stringLength) )
        #set ( $camelCase = "$camelCase$first$remaining" )
    $util.qr( $response.put("$camelCase", $res[$mapKey]) )

Using Variable Map

Variable map support is limited and does not differentiate numbers and strings data types, please inject them directly if needed.

Will be escaped properly: null, true, and false values.

  "version": "2018-05-29",
  "statements":   [
    "UPDATE <name-of-table> set deleted_at=NOW() WHERE id=:ID",
    "SELECT * FROM <name-of-table> WHERE id=:ID and unix_timestamp > $ctx.args.newerThan"
  variableMap: {
    ":ID": $ctx.args.id,
##    ":TIMESTAMP": $ctx.args.newerThan -- This will be handled as a string!!!


Author: Serverless-appsync
Source Code: https://github.com/serverless-appsync/serverless-appsync-simulator 
License: MIT License

#serverless #sync #graphql 

Monty  Boehm

Monty Boehm


How to Use Hotwire Rails


We are back with another exciting and much-talked-about Rails tutorial on how to use Hotwire with the Rails application. This Hotwire Rails tutorial is an alternate method for building modern web applications that consume a pinch of JavaScript.

Rails 7 Hotwire is the default front-end framework shipped with Rails 7 after it was launched. It is used to represent HTML over the wire in the Rails application. Previously, we used to add a hotwire-rails gem in our gem file and then run rails hotwire: install. However, with the introduction of Rails 7, the gem got deprecated. Now, we use turbo-rails and stimulus rails directly, which work as Hotwire’s SPA-like page accelerator and Hotwire’s modest JavaScript framework.

What is Hotwire?

Hotwire is a package of different frameworks that help to build applications. It simplifies the developer’s work for writing web pages without the need to write JavaScript, and instead sending HTML code over the wire.

Introduction to The Hotwire Framework:

1. Turbo:

It uses simplified techniques to build web applications while decreasing the usage of JavaScript in the application. Turbo offers numerous handling methods for the HTML data sent over the wire and displaying the application’s data without actually loading the entire page. It helps to maintain the simplicity of web applications without destroying the single-page application experience by using the below techniques:

Turbo Frames: Turbo Frames help to load the different sections of our markup without any dependency as it divides the page into different contexts separately called frames and updates these frames individually.
Turbo Drive: Every link doesn’t have to make the entire page reload when clicked. Only the HTML contained within the tag will be displayed.
Turbo Streams: To add real-time features to the application, this technique is used. It helps to bring real-time data to the application using CRUD actions.

2. Stimulus

It represents the JavaScript framework, which is required when JS is a requirement in the application. The interaction with the HTML is possible with the help of a stimulus, as the controllers that help those interactions are written by a stimulus.

3. Strada

Not much information is available about Strada as it has not been officially released yet. However, it works with native applications, and by using HTML bridge attributes, interaction is made possible between web applications and native apps.

Simple diagrammatic representation of Hotwire Stack:

Hotwire Stack

Prerequisites For Hotwire Rails Tutorial

As we are implementing the Ruby on Rails Hotwire tutorial, make sure about the following installations before you can get started.

  • Ruby on Rails
  • Hotwire gem
  • PostgreSQL/SQLite (choose any one database)
  • Turbo Rails
  • Stimulus.js

Looking for an enthusiastic team of ROR developers to shape the vision of your web project?
Contact Bacancy today and hire Ruby developers to start building your dream project!

Create a new Rails Project

Find the following commands to create a rails application.

mkdir ~/projects/railshotwire
cd ~/projects/railshotwire
echo "source 'https://rubygems.org'" > Gemfile
echo "gem 'rails', '~> 7.0.0'" >> Gemfile
bundle install  
bundle exec rails new . --force -d=postgresql

Now create some files for the project, up till now no usage of Rails Hotwire can be seen.
Fire the following command in your terminal.

  • For creating a default controller for the application
echo "class HomeController < ApplicationController" > app/controllers/home_controller.rb
echo "end" >> app/controllers/home_controller.rb
  • For creating another controller for the application
echo "class OtherController < ApplicationController" > app/controllers/other_controller.rb
echo "end" >> app/controllers/home_controller.rb
  • For creating routes for the application
echo "Rails.application.routes.draw do" > config/routes.rb
echo '  get "home/index"' >> config/routes.rb
echo '  get "other/index"' >> config/routes.rb
echo '  root to: "home#index"' >> config/routes.rb
echo 'end' >> config/routes.rb
  • For creating a default view for the application
mkdir app/views/home
echo '<h1>This is Rails Hotwire homepage</h1>' > app/views/home/index.html.erb
echo '<div><%= link_to "Enter to other page", other_index_path %></div>' >> app/views/home/index.html.erb
  • For creating another view for the application
mkdir app/views/other
echo '<h1>This is Another page</h1>' > app/views/other/index.html.erb
echo '<div><%= link_to "Enter to home page", root_path %></div>' >> app/views/other/index.html.erb
  • For creating a database and schema.rb file for the application
bin/rails db:create
bin/rails db:migrate
  • For checking the application run bin/rails s and open your browser, your running application will have the below view.

Rails Hotwire Home Page

Additionally, you can clone the code and browse through the project. Here’s the source code of the repository: Rails 7 Hotwire application

Now, let’s see how Hotwire Rails can work its magic with various Turbo techniques.

Hotwire Rails: Turbo Drive

Go to your localhost:3000 on your web browser and right-click on the Inspect and open a Network tab of the DevTools of the browser.

Now click on go to another page link that appears on the home page to redirect from the home page to another page. In our Network tab, we can see that this action of navigation is achieved via XHR. It appears only the part inside HTML is reloaded, here neither the CSS is reloaded nor the JS is reloaded when the navigation action is performed.

Hotwire Rails Turbo Drive

By performing this action we can see that Turbo Drive helps to represent the HTML response without loading the full page and only follows redirect and reindeer HTML responses which helps to make the application faster to access.

Hotwire Rails: Turbo Frame

This technique helps to divide the current page into different sections called frames that can be updated separately independently when new data is added from the server.
Below we discuss the different use cases of Turbo frame like inline edition, sorting, searching, and filtering of data.

Let’s perform some practical actions to see the example of these use cases.

Make changes in the app/controllers/home_controller.rb file


class HomeController < ApplicationController
   def turbo_frame_form
   def turbo_frame submit
      extracted_anynumber = params[:any][:anynumber]
      render :turbo_frame_form, status: :ok, locals: {anynumber: extracted_anynumber,      comment: 'turbo_frame_submit ok' }

Turbo Frame

Add app/views/home/turbo_frame_form.html.erb file to the application and add this content inside the file.



    <%= turbo_frame_tag 'anyframe' do %>
          <h2>Frame view</h2>
          <%= form_with scope: :any, url: turbo_frame_submit_path, local: true do |form| %>
              <%= form.label :anynumber, 'Type an integer (odd or even)', 'class' => 'my-0  d-inline'  %>
              <%= form.text_field :anynumber, type: 'number', 'required' => 'true', 'value' => "#{local_assigns[:anynumber] || 0}",  'aria-describedby' => 'anynumber' %>
              <%= form.submit 'Submit this number', 'id' => 'submit-number' %>
          <% end %>
        <h2>Data of the view</h2>
        <pre style="font-size: .7rem;"><%= JSON.pretty_generate(local_assigns) %></pre> 
    <% end %>


Add the content inside file

Make some adjustments in routes.rb


Rails.application.routes.draw do
  get 'home/index'
  get 'other/index'

  get '/home/turbo_frame_form' => 'home#turbo_frame_form', as: 'turbo_frame_form'
  post '/home/turbo_frame_submit' => 'home#turbo_frame_submit', as: 'turbo_frame_submit'

  root to: "home#index"
  • Next step is to change homepage view in app/views/home/index.html.erb


<h1>This is Rails Hotwire home page</h1>
<div><%= link_to "Enter to other page", other_index_path %></div>

<%= turbo_frame_tag 'anyframe' do %>        
      <h2>Home view</h2>
      <%= form_with scope: :any, url: turbo_frame_submit_path, local: true do |form| %>
          <%= form.label :anynumber, 'Type an integer (odd or even)', 'class' => 'my-0  d-inline'  %>
          <%= form.text_field :anynumber, type: 'number', 'required' => 'true', 'value' => "#{local_assigns[:anynumber] || 0}",  'aria-describedby' => 'anynumber' %>
          <%= form.submit 'Submit this number', 'id' => 'submit-number' %>
      <% end %>
<% end %>

Change HomePage

After making all the changes, restart the rails server and refresh the browser, the default view will appear on the browser.

restart the rails serverNow in the field enter any digit, after entering the digit click on submit button, and as the submit button is clicked we can see the Turbo Frame in action in the below screen, we can observe that the frame part changed, the first title and first link didn’t move.

submit button is clicked

Hotwire Rails: Turbo Streams

Turbo Streams deliver page updates over WebSocket, SSE or in response to form submissions by only using HTML and a series of CRUD-like operations, you are free to say that either

  • Update the piece of HTML while responding to all the other actions like the post, put, patch, and delete except the GET action.
  • Transmit a change to all users, without reloading the browser page.

This transmit can be represented by a simple example.

  • Make changes in app/controllers/other_controller.rb file of rails application


class OtherController < ApplicationController

  def post_something
    respond_to do |format|
      format.turbo_stream {  }


file of rails application

Add the below line in routes.rb file of the application


post '/other/post_something' => 'other#post_something', as: 'post_something'
Add the below line

Superb! Rails will now attempt to locate the app/views/other/post_something.turbo_stream.erb template at any moment the ‘/other/post_something’ endpoint is reached.

For this, we need to add app/views/other/post_something.turbo_stream.erb template in the rails application.


<turbo-stream action="append" target="messages">
    <div id="message_1">This changes the existing message!</div>
Add template in the rails application

This states that the response will try to append the template of the turbo frame with ID “messages”.

Now change the index.html.erb file in app/views/other paths with the below content.


<h1>This is Another page</h1>
<div><%= link_to "Enter to home page", root_path %></div>

<div style="margin-top: 3rem;">
  <%= form_with scope: :any, url: post_something_path do |form| %>
      <%= form.submit 'Post any message %>
  <% end %>
  <turbo-frame id="messages">
    <div>An empty message</div>
change the index.html.erb file
  • After making all the changes, restart the rails server and refresh the browser, and go to the other page.

go to the other page

  • Once the above screen appears, click on the Post any message button

Post any message button

This action shows that after submitting the response, the Turbo Streams help the developer to append the message, without reloading the page.

Another use case we can test is that rather than appending the message, the developer replaces the message. For that, we need to change the content of app/views/other/post_something.turbo_stream.erb template file and change the value of the action attribute from append to replace and check the changes in the browser.


<turbo-stream action="replace" target="messages">
    <div id="message_1">This changes the existing message!</div>

change the value of the action attributeWhen we click on Post any message button, the message that appear below that button will get replaced with the message that is mentioned in the app/views/other/post_something.turbo_stream.erb template

click on Post any message button


There are some cases in an application where JS is needed, therefore to cover those scenarios we require Hotwire JS tool. Hotwire has a JS tool because in some scenarios Turbo-* tools are not sufficient. But as we know that Hotwire is used to reduce the usage of JS in an application, Stimulus considers HTML as the single source of truth. Consider the case where we have to give elements on a page some JavaScript attributes, such as data controller, data-action, and data target. For that, a stimulus controller that can access elements and receive events based on those characteristics will be created.

Make a change in app/views/other/index.html.erb template file in rails application


<h1>This is Another page</h1>
<div><%= link_to "Enter to home page", root_path %></div>

<div style="margin-top: 2rem;">
  <%= form_with scope: :any, url: post_something_path do |form| %>
      <%= form.submit 'Post something' %>
  <% end %>
  <turbo-frame id="messages">
    <div>An empty message</div>

<div style="margin-top: 2rem;">
  <div data-controller="hello">
    <input data-hello-target="name" type="text">
    <button data-action="click->hello#greet">
    <span data-hello-target="output">

Make A changeMake changes in the hello_controller.js in path app/JavaScript/controllers and add a stimulus controller in the file, which helps to bring the HTML into life.


import { Controller } from "@hotwired/stimulus"

export default class extends Controller {
  static targets = [ "name", "output" ]

  greet() {
    this.outputTarget.textContent =
      `Hello, ${this.nameTarget.value}!`

add a stimulus controller in the fileGo to your browser after making the changes in the code and click on Enter to other page link which will navigate to the localhost:3000/other/index page there you can see the changes implemented by the stimulus controller that is designed to augment your HTML with just enough behavior to make it more responsive.

With just a little bit of work, Turbo and Stimulus together offer a complete answer for applications that are quick and compelling.

Using Rails 7 Hotwire helps to load the pages at a faster speed and allows you to render templates on the server, where you have access to your whole domain model. It is a productive development experience in ROR, without compromising any of the speed or responsiveness associated with SPA.


We hope you were satisfied with our Rails Hotwire tutorial. Write to us at service@bacancy.com for any query that you want to resolve, or if you want us to share a tutorial on your query.

For more such solutions on RoR, check out our Ruby on Rails Tutorials. We will always strive to amaze you and cater to your needs.

Original article source at: https://www.bacancytechnology.com/

#rails #ruby 

Generis: Versatile Go Code Generator


Versatile Go code generator.


Generis is a lightweight code preprocessor adding the following features to the Go language :

  • Generics.
  • Free-form macros.
  • Conditional compilation.
  • HTML templating.
  • Allman style conversion.


package main;


import (


#define DebugMode
#as true

// ~~

#define HttpPort
#as 8080

// ~~

#define WriteLine( {{text}} )
#as log.Println( {{text}} )

// ~~

#define local {{variable}} : {{type}};
#as var {{variable}} {{type}};

// ~~

#define DeclareStack( {{type}}, {{name}} )
    // -- TYPES

    type {{name}}Stack struct
        ElementArray []{{type}};

    // -- INQUIRIES

    func ( stack * {{name}}Stack ) IsEmpty(
        ) bool
        return len( stack.ElementArray ) == 0;

    // -- OPERATIONS

    func ( stack * {{name}}Stack ) Push(
        element {{type}}
        stack.ElementArray = append( stack.ElementArray, element );

    // ~~

    func ( stack * {{name}}Stack ) Pop(
        ) {{type}}
            element : {{type}};

        element = stack.ElementArray[ len( stack.ElementArray ) - 1 ];

        stack.ElementArray = stack.ElementArray[ : len( stack.ElementArray ) - 1 ];

        return element;

// ~~

#define DeclareStack( {{type}} )
#as DeclareStack( {{type}}, {{type:PascalCase}} )

// -- TYPES

DeclareStack( string )
DeclareStack( int32 )


func HandleRootPage(
    response_writer http.ResponseWriter,
    request * http.Request
        boolean : bool;
        natural : uint;
        integer : int;
        real : float64;
        text : string;
        integer_stack : Int32Stack;

    boolean = true;
    natural = 10;
    integer = 20;
    real = 30.0;
    text = "text";
    escaped_url_text = "&escaped text?";
    escaped_html_text = "<escaped text/>";

    integer_stack.Push( 10 );
    integer_stack.Push( 20 );
    integer_stack.Push( 30 );

    #write response_writer
        <!DOCTYPE html>
        <html lang="en">
                <meta charset="utf-8">
                <title><%= request.URL.Path %></title>
                <% if ( boolean ) { %>
                    <%= "URL : " + request.URL.Path %>
                    <%@ natural %>
                    <%# integer %>
                    <%& real %>
                    <%~ text %>
                    <%^ escaped_url_text %>
                    <%= escaped_html_text %>
                    <%= "<%% ignored %%>" %>
                    <%% ignored %%>
                <% } %>
                Stack :
                <% for !integer_stack.IsEmpty() { %>
                    <%# integer_stack.Pop() %>
                <% } %>

// ~~

func main()
    http.HandleFunc( "/", HandleRootPage );

    #if DebugMode
        WriteLine( "Listening on http://localhost:HttpPort" );

        http.ListenAndServe( ":HttpPort", nil )


#define directive

Constants and generic code can be defined with the following syntax :

#define old code
#as new code

#define old code

#as new code


#define parameter

The #define directive can contain one or several parameters :

{{variable name}} : hierarchical code (with properly matching brackets and parentheses)
{{variable name#}} : statement code (hierarchical code without semicolon)
{{variable name$}} : plain code
{{variable name:boolean expression}} : conditional hierarchical code
{{variable name#:boolean expression}} : conditional statement code
{{variable name$:boolean expression}} : conditional plain code

They can have a boolean expression to require they match specific conditions :

HasText text
HasPrefix prefix
HasSuffix suffix
HasIdentifier text
expression && expression
expression || expression
( expression )

The #define directive must not start or end with a parameter.

#as parameter

The #as directive can use the value of the #define parameters :

{{variable name}}
{{variable name:filter function}}
{{variable name:filter function:filter function:...}}

Their value can be changed through one or several filter functions :

ReplacePrefix old_prefix new_prefix
ReplaceSuffix old_suffix new_suffix
ReplaceText old_text new_text
ReplaceIdentifier old_identifier new_identifier
AddPrefix prefix
AddSuffix suffix
RemovePrefix prefix
RemoveSuffix suffix
RemoveText text
RemoveIdentifier identifier

#if directive

Conditional code can be defined with the following syntax :

#if boolean expression
    #if boolean expression
    #if boolean expression

The boolean expression can use the following operators :

expression && expression
expression || expression
( expression )

#write directive

Templated HTML code can be sent to a stream writer using the following syntax :

#write writer expression
    <% code %>
    <%@ natural expression %>
    <%# integer expression %>
    <%& real expression %>
    <%~ text expression %>
    <%= escaped text expression %>
    <%! removed content %>
    <%% ignored tags %%>


  • There is no operator precedence in boolean expressions.
  • The --join option requires to end the statements with a semicolon.
  • The #writer directive is only available for the Go language.


Install the DMD 2 compiler (using the MinGW setup option on Windows).

Build the executable with the following command line :

dmd -m64 generis.d

Command line

generis [options]


--prefix # : set the command prefix
--parse INPUT_FOLDER/ : parse the definitions of the Generis files in the input folder
--process INPUT_FOLDER/ OUTPUT_FOLDER/ : reads the Generis files in the input folder and writes the processed files in the output folder
--trim : trim the HTML templates
--join : join the split statements
--create : create the output folders if needed
--watch : watch the Generis files for modifications
--pause 500 : time to wait before checking the Generis files again
--tabulation 4 : set the tabulation space count
--extension .go : generate files with this extension


generis --process GS/ GO/

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder.

generis --process GS/ GO/ --create

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, creating the output folders if needed.

generis --process GS/ GO/ --create --watch

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, creating the output folders if needed and watching the Generis files for modifications.

generis --process GS/ GO/ --trim --join --create --watch

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, trimming the HTML templates, joining the split statements, creating the output folders if needed and watching the Generis files for modifications.



Author: Senselogic
Source Code: https://github.com/senselogic/GENERIS 
License: View license

#go #golang #code 

akshay L

akshay L


Data Science With Python Training | Python Data Science Course | Intellipaat

In this Data Science With Python Training video, you will learn everything about data science and python from basic to advance level. This python data science course video will help you learn various python concepts, AI, and lots of projects, hands-on demo, and lastly top trending data science and python interview questions. This is a must-watch video for everyone who wishes o learn data science and python to make a career in it.

#data science with python #python data science course #python data science #data science with python

Uriah  Dietrich

Uriah Dietrich


How To Build A Data Science Career In 2021

For this week’s data science career interview, we got in touch with Dr Suman Sanyal, Associate Professor of Computer Science and Engineering at NIIT University. In this interview, Dr Sanyal shares his insights on how universities can contribute to this highly promising sector and what aspirants can do to build a successful data science career.

With industry-linkage, technology and research-driven seamless education, NIIT University has been recognised for addressing the growing demand for data science experts worldwide with its industry-ready courses. The university has recently introduced B.Tech in Data Science course, which aims to deploy data sets models to solve real-world problems. The programme provides industry-academic synergy for the students to establish careers in data science, artificial intelligence and machine learning.

“Students with skills that are aligned to new-age technology will be of huge value. The industry today wants young, ambitious students who have the know-how on how to get things done,” Sanyal said.

#careers # #data science aspirant #data science career #data science career intervie #data science education #data science education marke #data science jobs #niit university data science