Elian  Harber

Elian Harber

1620036300

Raspberry Pi Read-only Kiosk Mode: 2021 Complete Tutorial

Including network setup software and remote control

This article, this tutorial, was written because of one simple reason: I wasn’t able to find something similar anywhere else.

I wanted a complete set of instructions, how to change a newly unboxed Raspberry Pi into a device, that can be used in background for some other device with touch screen.

I wanted the result to look like what you can see below (Czech version). A device with a touch display and Raspberry Pi inside. I wanted a smooth boot into some “setup” screen where I can change network and set up a server address, that will be loaded automatically, if everything is OK. Server address is — in this case — a web page, containing final software. Like some software for factories (something like this), banks, parking lots, etc.

This tutorial is a complete tutorial, you can use and change as you want. This tutorial is a working one (as of April 2021), and is based on work of others. I just combined it all together. Because I combined different things all over the internet, and many times I wasn’t sure who the original author really is, I am not able to write down every author for every piece of tutorial. If you are an author, and reading this, please feel free to contact me, I will gladly update this article.

I also added some features, like a remote restart, remote shutdown, remote screenshot, etc. So one can build a web page and manage all connected devices.

Raspberry Pi 4b was used in the process.

#tutorial #go #raspberry-pi #golang

What is GEEK

Buddha Community

Raspberry Pi Read-only Kiosk Mode: 2021 Complete Tutorial
Elian  Harber

Elian Harber

1620036300

Raspberry Pi Read-only Kiosk Mode: 2021 Complete Tutorial

Including network setup software and remote control

This article, this tutorial, was written because of one simple reason: I wasn’t able to find something similar anywhere else.

I wanted a complete set of instructions, how to change a newly unboxed Raspberry Pi into a device, that can be used in background for some other device with touch screen.

I wanted the result to look like what you can see below (Czech version). A device with a touch display and Raspberry Pi inside. I wanted a smooth boot into some “setup” screen where I can change network and set up a server address, that will be loaded automatically, if everything is OK. Server address is — in this case — a web page, containing final software. Like some software for factories (something like this), banks, parking lots, etc.

This tutorial is a complete tutorial, you can use and change as you want. This tutorial is a working one (as of April 2021), and is based on work of others. I just combined it all together. Because I combined different things all over the internet, and many times I wasn’t sure who the original author really is, I am not able to write down every author for every piece of tutorial. If you are an author, and reading this, please feel free to contact me, I will gladly update this article.

I also added some features, like a remote restart, remote shutdown, remote screenshot, etc. So one can build a web page and manage all connected devices.

Raspberry Pi 4b was used in the process.

#tutorial #go #raspberry-pi #golang

Tools and Images to Build a Raspberry Pi n8n server

n8n-pi

Tools and Images to Build a Raspberry Pi n8n server

Introduction

The purpose of this project is to create a Raspberry Pi image preconfigured with n8n so that it runs out of the box.

What is n8n?

n8n is a no-code/low code environment used to connect and automate different systems and services. It is programmed using a series of connected nodes that receive, transform, and then transmit date from and to other nodes. Each node represents a service or system allowing these different entities to interact. All of this is done using a WebUI.

Why n8n-pi?

Whevever a new technology is released, two common barriers often prevent potential users from trying out the technology:

  1. System costs
  2. Installation & configuration challenges

The n8n-pi project eliminates these two roadblocks by preconfiguring a working system that runs on easily available, low cost hardware. For as little as $40 and a few minutes, they can have a full n8n system up and running.

Thanks!

This project would not be possible if it was not for the help of the following:

Documentation

All documentation for this project can be found at http://n8n-pi.tephlon.xyz.

Download Details:

Author: TephlonDude

GitHub: https://github.com/TephlonDude/n8n-pi

#pi #raspberry pi #raspberry #raspberry-pi

TensorFlow Lite Object Detection using Raspberry Pi and Pi Camera

I have not created the Object Detection model, I have just merely cloned Google’s Tensor Flow Lite model and followed their Raspberry Pi Tutorial which they talked about in the Readme! You don’t need to use this article if you understand everything from the Readme. I merely talk about what I did!

Prerequisites:

  • I have used a Raspberry Pi 3 Model B and PI Camera Board (3D printed a case for camera board). **I had this connected before starting and did not include this in the 90 minutes **(plenty of YouTube videos showing how to do this depending on what Pi model you have. I used a video like this a while ago!)

  • I have used my Apple Macbook which is Linux at heart and so is the Raspberry Pi. By using Apple you don’t need to install any applications to interact with the Raspberry Pi, but on Windows you do (I will explain where to go in the article if you use windows)

#raspberry-pi #object-detection #raspberry-pi-camera #tensorflow-lite #tensorflow #tensorflow lite object detection using raspberry pi and pi camera

Harry Patel

Harry Patel

1614145832

A Complete Process to Create an App in 2021

It’s 2021, everything is getting replaced by a technologically emerged ecosystem, and mobile apps are one of the best examples to convey this message.

Though bypassing times, the development structure of mobile app has also been changed, but if you still follow the same process to create a mobile app for your business, then you are losing a ton of opportunities by not giving top-notch mobile experience to your users, which your competitors are doing.

You are about to lose potential existing customers you have, so what’s the ideal solution to build a successful mobile app in 2021?

This article will discuss how to build a mobile app in 2021 to help out many small businesses, startups & entrepreneurs by simplifying the mobile app development process for their business.

The first thing is to EVALUATE your mobile app IDEA means how your mobile app will change your target audience’s life and why your mobile app only can be the solution to their problem.

Now you have proposed a solution to a specific audience group, now start to think about the mobile app functionalities, the features would be in it, and simple to understand user interface with impressive UI designs.

From designing to development, everything is covered at this point; now, focus on a prelaunch marketing plan to create hype for your mobile app’s targeted audience, which will help you score initial downloads.

Boom, you are about to cross a particular download to generate a specific revenue through your mobile app.

#create an app in 2021 #process to create an app in 2021 #a complete process to create an app in 2021 #complete process to create an app in 2021 #process to create an app #complete process to create an app

The Raspberry Pi 400 - A full computer in a keyboard!

The Raspberry Pi 400 has arrived in the studio, and in this video I’ll give it a review. I’ll show an unboxing of the Personal Computer Kit from Canakit, which is a great way to get started on the Pi 400. Then I’ll show off the hardware, as well as the out-of-box experience.

#raspberry pi #pi #raspberry-pi