Three Projects to Make You a Better Programmer

A purposeful selection

In this article, I’ve provided three projects which can improve your programming ability in the areas of web development, machine learning, and Android development.

These projects were not selected without careful thought.

I consider them to be the most impactful projects I completed during my 4 years of studying computer science.

Impactful in terms of how much knowledge I gained compared to the time invested.

For each project, I have created some rough steps to follow. These are intended to serve as general guidance rather than hard rules.

I encourage you to take these projects as a starting point and expand on them with your own ideas.

Remember to be creative and have fun with your code!

“The computer programmer is a creator of universes for which he alone is the lawgiver.” ― Joseph Weizenbaum

Why should we use projects to learn?

It may be argued that some university teaching styles are starting to show their age.

In particular, those which require you to slog through tens of hours of rigorous lecture material such that you may regurgitate it in time for a final exam.

At best these are tedious and ineffective. In the worst case, they can be demoralising, and overwhelming

From personal experience, I find that after an exam, I forget most of the material in a matter of days.

I cannot retain it because I do not continue to practise it.

So why am I talking about university teaching styles?

Because there is one which shines far above the rest — one which we can learn a great deal from.

The take-home assignment.

Assignments are naturally suited to practical subjects, in particular those which involve some form of programming.

In order to complete them properly, you need a thorough grasp of the underlying principles upon which they are based.

But you do not need to be an expert before starting.

Whenever I am working on a programming assignment, my workflow is as follows:

Prioritise a task to complete.
Define what I need to know in order to complete the task.
Research and learn.
Complete task.
Repeat steps 1–4 until the assignment is complete.

Define. Research. Apply.

Over several weeks, I am iteratively building on top of my previous knowledge by breaking down my tasks into bite-sized chunks.

This process of defining what you need to know, acquiring the knowledge, and then applying it, is what makes completing assignments so effective.

It’s exactly the process I use when I’m developing a project, be it for fun or for work. I’ve found it to be the fastest and most enjoyable method for progressing as a developer.

No matter your skill level, the process stays the same.

#web-development #programming #software-engineering #machine-learning #android

Top Android Projects with Source Code

Android Projects with Source Code – Your entry pass into the world of Android

Hello Everyone, welcome to this article, which is going to be really important to all those who’re in dilemma for their projects and the project submissions. This article is also going to help you if you’re an enthusiast looking forward to explore and enhance your Android skills. The reason is that we’re here to provide you the best ideas of Android Project with source code that you can choose as per your choice.

These project ideas are simple suggestions to help you deal with the difficulty of choosing the correct projects. In this article, we’ll see the project ideas from beginners level and later we’ll move on to intermediate to advance.

Android Projects with Source Code

Before working on real-time projects, it is recommended to create a sample hello world project in android studio and get a flavor of project creation as well as execution: Create your first android project

Android Projects for beginners

1. Calculator

Android Project: A calculator will be an easy application if you have just learned Android and coding for Java. This Application will simply take the input values and the operation to be performed from the users. After taking the input it’ll return the results to them on the screen. This is a really easy application and doesn’t need use of any particular package.

To make a calculator you’d need Android IDE, Kotlin/Java for coding, and for layout of your application, you’d need XML or JSON. For this, coding would be the same as that in any language, but in the form of an application. Not to forget creating a calculator initially will increase your logical thinking.

Once the user installs the calculator, they’re ready to use it even without the internet. They’ll enter the values, and the application will show them the value after performing the given operations on the entered operands.

Source Code: Simple Calculator Project

2. A Reminder App

Android Project: This is a good project for beginners. A Reminder App can help you set reminders for different events that you have throughout the day. It’ll help you stay updated with all your tasks for the day. It can be useful for all those who are not so good at organizing their plans and forget easily. This would be a simple application just whose task would be just to remind you of something at a particular time.

To make a Reminder App you need to code in Kotlin/Java and design the layout using XML or JSON. For the functionality of the app, you’d need to make use of AlarmManager Class and Notifications in Android.

In this, the user would be able to set reminders and time in the application. Users can schedule reminders that would remind them to drink water again and again throughout the day. Or to remind them of their medications.

3. Quiz Application

Android Project: Another beginner’s level project Idea can be a Quiz Application in android. Here you can provide the users with Quiz on various general knowledge topics. These practices will ensure that you’re able to set the layouts properly and slowly increase your pace of learning the Android application development. In this you’ll learn to use various Layout components at the same time understanding them better.

To make a quiz application you’ll need to code in Java and set layouts using xml or java whichever you prefer. You can also use JSON for the layouts whichever preferable.

In the app, questions would be asked and answers would be shown as multiple choices. The user selects the answer and gets shown on the screen if the answers are correct. In the end the final marks would be shown to the users.

4. Simple Tic-Tac-Toe

Android Project: Tic-Tac-Toe is a nice game, I guess most of you all are well aware of it. This will be a game for two players. In this android game, users would be putting X and O in the given 9 parts of a box one by one. The first player to arrange X or O in an adjacent line of three wins.

To build this game, you’d need Java and XML for Android Studio. And simply apply the logic on that. This game will have a set of three matches. So, it’ll also have a scoreboard. This scoreboard will show the final result at the end of one complete set.

Upon entering the game they’ll enter their names. And that’s when the game begins. They’ll touch one of the empty boxes present there and get their turn one by one. At the end of the game, there would be a winner declared.

Source Code: Tic Tac Toe Game Project

5. Stopwatch

Android Project: A stopwatch is another simple android project idea that will work the same as a normal handheld timepiece that measures the time elapsed between its activation and deactivation. This application will have three buttons that are: start, stop, and hold.

This application would need to use Java and XML. For this application, we need to set the timer properly as it is initially set to milliseconds, and that should be converted to minutes and then hours properly. The users can use this application and all they’d need to do is, start the stopwatch and then stop it when they are done. They can also pause the timer and continue it again when they like.

6. To Do App

Android Project: This is another very simple project idea for you as a beginner. This application as the name suggests will be a To-Do list holding app. It’ll store the users schedules and their upcoming meetings or events. In this application, users will be enabled to write their important notes as well. To make it safe, provide a login page before the user can access it.

So, this app will have a login page, sign-up page, logout system, and the area to write their tasks, events, or important notes. You can build it in android studio using Java and XML at ease. Using XML you can build the user interface as user-friendly as you can. And to store the users’ data, you can use SQLite enabling the users to even delete the data permanently.

Now for users, they will sign up and get access to the write section. Here the users can note down the things and store them permanently. Users can also alter the data or delete them. Finally, they can logout and also, login again and again whenever they like.

7. Roman to decimal converter

Android Project: This app is aimed at the conversion of Roman numbers to their significant decimal number. It’ll help to check the meaning of the roman numbers. Moreover, it will be easy to develop and will help you get your hands on coding and Android.

You need to use Android Studio, Java for coding and XML for interface. The application will take input from the users and convert them to decimal. Once it converts the Roman no. into decimal, it will show the results on the screen.

The users are supposed to just enter the Roman Number and they’ll get the decimal values on the screen. This can be a good android project for final year students.

8. Virtual Dice Roller

Android Project: Well, coming to this part that is Virtual Dice or a random no. generator. It is another simple but interesting app for computer science students. The only task that it would need to do would be to generate a number randomly. This can help people who’re often confused between two or more things.

Using a simple random number generator you can actually create something as good as this. All you’d need to do is get you hands-on OnClick listeners. And a good layout would be cherry on the cake.

The user’s task would be to set the range of the numbers and then click on the roll button. And the app will show them a randomly generated number. Isn’t it interesting ? Try soon!

9. A Scientific Calculator App

Android Project: This application is very important for you as a beginner as it will let you use your logical thinking and improve your programming skills. This is a scientific calculator that will help the users to do various calculations at ease.

To make this application you’d need to use Android Studio. Here you’d need to use arithmetic logics for the calculations. The user would need to give input to the application that will be in terms of numbers. After that, the user will give the operator as an input. Then the Application will calculate and generate the result on the user screen.

10. SMS App

Android Project: An SMS app is another easy but effective idea. It will let you send the SMS to various no. just in the same way as you use the default messaging application in your phone. This project will help you with better understanding of SMSManager in Android.

For this application, you would need to implement Java class SMSManager in Android. For the Layout you can use XML or JSON. Implementing SMSManager into the app is an easy task, so you would love this.

The user would be provided with the facility to text to whichever number they wish also, they’d be able to choose the numbers from the contact list. Another thing would be the Textbox, where they’ll enter their message. Once the message is entered they can happily click on the send button.

#android tutorials #android application final year project #android mini projects #android project for beginners #android project ideas #android project ideas for beginners #android projects #android projects for students #android projects with source code #android topics list #intermediate android projects #real-time android projects

Shawn Durgan

1595547778

10 Writing steps to create a good project brief - Mobile app development

Developing a mobile application can often be more challenging than it seems at first glance. Whether you’re a developer, UI designer, project lead or CEO of a mobile-based startup, writing good project briefs prior to development is pivotal. According to Tech Jury, 87% of smartphone users spend time exclusively on mobile apps, with 18-24-year-olds spending 66% of total digital time on mobile apps. Of that, 89% of the time is spent on just 18 apps depending on individual users’ preferences, making proper app planning crucial for success.

Today’s audiences know what they want and don’t want in their mobile apps, encouraging teams to carefully write their project plans before they approach development. But how do you properly write a mobile app development brief without sacrificing your vision and staying within the initial budget? Why should you do so in the first place? Let’s discuss that and more in greater detail.

Why a Good Mobile App Project Brief Matters?

Why-a-Good-Mobile-App-Project-Brief-Matters

It’s worth discussing the significance of mobile app project briefs before we tackle the writing process itself. In practice, a project brief is used as a reference tool for developers to remain focused on the client’s deliverables. Approaching the development process without written and approved documentation can lead to drastic, last-minute changes, misunderstanding, as well as a loss of resources and brand reputation.

For example, developing a mobile app that filters restaurants based on food type, such as Happy Cow, means that developers should stay focused on it. Knowing that such and such features, UI elements, and API are necessary will help team members collaborate better in order to meet certain expectations. Whether you develop an app under your brand’s banner or outsource coding and design services to would-be clients, briefs can provide you with several benefits:

Clarity on what your mobile app project “is” and “isn’t” early in development
Point of reference for developers, project leads, and clients throughout the cycle
Smart allocation of available time and resources based on objective development criteria
Streamlined project data storage for further app updates and iterations

Writing Steps to Create a Good Mobile App Project Brief

Writing-Steps-to-Create-a-Good-Mobile-App-Project-Brief

1. Establish the “You” Behind the App

Depending on how “open” your project is to the public, you will want to write a detailed section about who the developers are. Elements such as company name, address, project lead, project title, as well as contact information, should be included in this introductory segment. Regardless of whether you build an in-house app or outsource developers to a client, this section is used for easy document storage and access.

#android app #ios app #minimum viable product (mvp) #mobile app development #web development #how do you write a project design #how to write a brief #how to write a project summary #how to write project summary #program brief example #project brief #project brief example #project brief template #project proposal brief #simple project brief template

Ray Patel

1619636760

42 Exciting Python Project Ideas & Topics for Beginners [2021]

Python Project Ideas

Python is one of the most popular programming languages currently. It looks like this trend is about to continue in 2021 and beyond. So, if you are a Python beginner, the best thing you can do is work on some real-time Python project ideas.

We, here at upGrad, believe in a practical approach as theoretical knowledge alone won’t be of help in a real-time work environment. In this article, we will be exploring some interesting Python project ideas which beginners can work on to put their Python knowledge to test. In this article, you will find 42 top python project ideas for beginners to get hands-on experience on Python

Moreover, project-based learning helps improve student knowledge. That’s why all of the upGrad courses cover case studies and assignments based on real-life problems. This technique is ideally for, but not limited to, beginners in programming skills.

But first, let’s address the more pertinent question that must be lurking in your mind:

#data science #python project #python project ideas #python project ideas for beginners #python project topics #python projects #python projects for beginners

Elian Harber

1641430440

Bokeh Plotting Backend for Pandas and GeoPandas

Pandas-Bokeh provides a Bokeh plotting backend for Pandas, GeoPandas and Pyspark DataFrames, similar to the already existing Visualization feature of Pandas. Importing the library adds a complementary plotting method plot_bokeh() on DataFrames and Series.

With Pandas-Bokeh, creating stunning, interactive, HTML-based visualization is as easy as calling:

df.plot_bokeh()

Pandas-Bokeh also provides native support as a Pandas Plotting backend for Pandas >= 0.25. When Pandas-Bokeh is installed, switchting the default Pandas plotting backend to Bokeh can be done via:

pd.set_option('plotting.backend', 'pandas_bokeh')

More details about the new Pandas backend can be found below.

Interactive Documentation

Please visit:

https://patrikhlobil.github.io/Pandas-Bokeh/

for an interactive version of the documentation below, where you can play with the dynamic Bokeh plots.

For more information have a look at the Examples below or at notebooks on the Github Repository of this project.

Startimage

Installation

You can install Pandas-Bokeh from PyPI via pip

pip install pandas-bokeh

or conda:

conda install -c patrikhlobil pandas-bokeh

With the current release 0.5.5, Pandas-Bokeh officially supports Python 3.6 and newer. For more details, see Release Notes.

How To Use

Classical Use

The Pandas-Bokeh library should be imported after Pandas, GeoPandas and/or Pyspark. After the import, one should define the plotting output, which can be:

pandas_bokeh.output_notebook(): Embeds the Plots in the cell outputs of the notebook. Ideal when working in Jupyter Notebooks.

pandas_bokeh.output_file(filename): Exports the plot to the provided filename as an HTML.

For more details about the plotting outputs, see the reference here or the Bokeh documentation.

Notebook output (see also bokeh.io.output_notebook)

import pandas as pd import pandas_bokeh pandas_bokeh.output_notebook()

File output to "Interactive Plot.html" (see also bokeh.io.output_file)

import pandas as pd import pandas_bokeh pandas_bokeh.output_file("Interactive Plot.html")

Pandas-Bokeh as native Pandas plotting backend

For pandas >= 0.25, a plotting backend switch is natively supported. It can be achievied by calling:

import pandas as pd
pd.set_option('plotting.backend', 'pandas_bokeh')

Now, the plotting API is accessible for a Pandas DataFrame via:

df.plot(...)

All additional functionalities of Pandas-Bokeh are then accessible at pd.plotting. So, setting the output to notebook is:

pd.plotting.output_notebook()

or calling the grid layout functionality:

pd.plotting.plot_grid(...)

Note: Backwards compatibility is kept since there will still be the df.plot_bokeh(...) methods for a DataFrame.

Plot types

Supported plottypes are at the moment:

Pandas & Pyspark DataFrames
Geoplots (Point, Line, Polygon) with GeoPandas

Also, check out the complementary chapter Outputs, Formatting & Layouts about:

Lineplot

Basic Lineplot

This simple lineplot in Pandas-Bokeh already contains various interactive elements:

a pannable and zoomable (zoom in plotarea and zoom on axis) plot
by clicking on the legend elements, one can hide and show the individual lines
a Hovertool for the plotted lines

Consider the following simple example:

import numpy as np

np.random.seed(42)
df = pd.DataFrame({"Google": np.random.randn(1000)+0.2, 
                   "Apple": np.random.randn(1000)+0.17}, 
                   index=pd.date_range('1/1/2000', periods=1000))
df = df.cumsum()
df = df + 50
df.plot_bokeh(kind="line")       #equivalent to df.plot_bokeh.line()

ApplevsGoogle_1

Note, that similar to the regular pandas.DataFrame.plot method, there are also additional accessors to directly access the different plotting types like:

df.plot_bokeh(kind="line", ...) → df.plot_bokeh.line(...)
df.plot_bokeh(kind="bar", ...) → df.plot_bokeh.bar(...)
df.plot_bokeh(kind="hist", ...) → df.plot_bokeh.hist(...)
...

Advanced Lineplot

There are various optional parameters to tune the plots, for example:

kind: Which kind of plot should be produced. Currently supported are: "line", "point", "scatter", "bar" and "histogram". In the near future many more will be implemented as horizontal barplot, boxplots, pie-charts, etc.

x: Name of the column to use for the horizontal x-axis. If the x parameter is not specified, the index is used for the x-values of the plot. Alternative, also an array of values can be passed that has the same number of elements as the DataFrame.

y: Name of column or list of names of columns to use for the vertical y-axis.

figsize: Choose width & height of the plot

title: Sets title of the plot

xlim/ylim: Set visibler range of plot for x- and y-axis (also works for datetime x-axis)

xlabel/ylabel: Set x- and y-labels

logx/logy: Set log-scale on x-/y-axis

xticks/yticks: Explicitly set the ticks on the axes

color: Defines a single color for a plot.

colormap: Can be used to specify multiple colors to plot. Can be either a list of colors or the name of a Bokeh color palette

hovertool: If True a Hovertool is active, else if False no Hovertool is drawn.

hovertool_string: If specified, this string will be used for the hovertool (@{column} will be replaced by the value of the column for the element the mouse hovers over, see also Bokeh documentation and here)

toolbar_location: Specify the position of the toolbar location (None, "above", "below", "left" or "right"). Default: "right"

zooming: Enables/Disables zooming. Default: True

panning: Enables/Disables panning. Default: True

fontsize_label/fontsize_ticks/fontsize_title/fontsize_legend: Set fontsize of labels, ticks, title or legend (int or string of form "15pt")

rangetool Enables a range tool scroller. Default False

kwargs**: Optional keyword arguments of bokeh.plotting.figure.line

Try them out to get a feeling for the effects. Let us consider now:

df.plot_bokeh.line(
    figsize=(800, 450),
    y="Apple",
    title="Apple vs Google",
    xlabel="Date",
    ylabel="Stock price [$]",
    yticks=[0, 100, 200, 300, 400],
    ylim=(0, 400),
    toolbar_location=None,
    colormap=["red", "blue"],
    hovertool_string=r"""<img
                        src='https://upload.wikimedia.org/wikipedia/commons/thumb/f/fa/Apple_logo_black.svg/170px-Apple_logo_black.svg.png' 
                        height="42" alt="@imgs" width="42"
                        style="float: left; margin: 0px 15px 15px 0px;"
                        border="2"></img> Apple 
                        
                        <h4> Stock Price: </h4> @{Apple}""",
    panning=False,
    zooming=False)

ApplevsGoogle_2

Lineplot with data points

For lineplots, as for many other plot-kinds, there are some special keyword arguments that only work for this plotting type. For lineplots, these are:

plot_data_points: Plot also the data points on the lines

plot_data_points_size: Determines the size of the data points

marker: Defines the point type (Default: "circle"). Possible values are: 'circle', 'square', 'triangle', 'asterisk', 'circle_x', 'square_x', 'inverted_triangle', 'x', 'circle_cross', 'square_cross', 'diamond', 'cross'

kwargs**: Optional keyword arguments of bokeh.plotting.figure.line```

Let us use this information to have another version of the same plot:

df.plot_bokeh.line(
    figsize=(800, 450),
    title="Apple vs Google",
    xlabel="Date",
    ylabel="Stock price [$]",
    yticks=[0, 100, 200, 300, 400],
    ylim=(100, 200),
    xlim=("2001-01-01", "2001-02-01"),
    colormap=["red", "blue"],
    plot_data_points=True,
    plot_data_points_size=10,
    marker="asterisk")

ApplevsGoogle_3

Lineplot with rangetool

ts = pd.Series(np.random.randn(1000), index=pd.date_range('1/1/2000', periods=1000))
df = pd.DataFrame(np.random.randn(1000, 4), index=ts.index, columns=list('ABCD'))
df = df.cumsum()

df.plot_bokeh(rangetool=True)

rangetool

Pointplot

If you just wish to draw the date points for curves, the pointplot option is the right choice. It also accepts the kwargs of bokeh.plotting.figure.scatter like marker or size:

import numpy as np

x = np.arange(-3, 3, 0.1)
y2 = x**2
y3 = x**3
df = pd.DataFrame({"x": x, "Parabula": y2, "Cube": y3})
df.plot_bokeh.point(
    x="x",
    xticks=range(-3, 4),
    size=5,
    colormap=["#009933", "#ff3399"],
    title="Pointplot (Parabula vs. Cube)",
    marker="x")

Pointplot

Stepplot

With a similar API as the line- & pointplots, one can generate a stepplot. Additional keyword arguments for this plot type are passes to bokeh.plotting.figure.step, e.g. mode (before, after, center), see the following example

import numpy as np

x = np.arange(-3, 3, 1)
y2 = x**2
y3 = x**3
df = pd.DataFrame({"x": x, "Parabula": y2, "Cube": y3})
df.plot_bokeh.step(
    x="x",
    xticks=range(-1, 1),
    colormap=["#009933", "#ff3399"],
    title="Pointplot (Parabula vs. Cube)",
    figsize=(800,300),
    fontsize_title=30,
    fontsize_label=25,
    fontsize_ticks=15,
    fontsize_legend=5,
    )

df.plot_bokeh.step(
    x="x",
    xticks=range(-1, 1),
    colormap=["#009933", "#ff3399"],
    title="Pointplot (Parabula vs. Cube)",
    mode="after",
    figsize=(800,300)
    )

Stepplot

Note that the step-plot API of Bokeh does so far not support a hovertool functionality.

Scatterplot

A basic scatterplot can be created using the kind="scatter" option. For scatterplots, the x and y parameters have to be specified and the following optional keyword argument is allowed:

category: Determines the category column to use for coloring the scatter points

kwargs**: Optional keyword arguments of bokeh.plotting.figure.scatter

Note, that the pandas.DataFrame.plot_bokeh() method return per default a Bokeh figure, which can be embedded in Dashboard layouts with other figures and Bokeh objects (for more details about (sub)plot layouts and embedding the resulting Bokeh plots as HTML click here).

In the example below, we use the building grid layout support of Pandas-Bokeh to display both the DataFrame (using a Bokeh DataTable) and the resulting scatterplot:

# Load Iris Dataset:
df = pd.read_csv(
    r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/iris/iris.csv"
)
df = df.sample(frac=1)

# Create Bokeh-Table with DataFrame:
from bokeh.models.widgets import DataTable, TableColumn
from bokeh.models import ColumnDataSource

data_table = DataTable(
    columns=[TableColumn(field=Ci, title=Ci) for Ci in df.columns],
    source=ColumnDataSource(df),
    height=300,
)

# Create Scatterplot:
p_scatter = df.plot_bokeh.scatter(
    x="petal length (cm)",
    y="sepal width (cm)",
    category="species",
    title="Iris DataSet Visualization",
    show_figure=False,
)

# Combine Table and Scatterplot via grid layout:
pandas_bokeh.plot_grid([[data_table, p_scatter]], plot_width=400, plot_height=350)

Scatterplot

A possible optional keyword parameters that can be passed to bokeh.plotting.figure.scatter is size. Below, we use the sepal length of the Iris data as reference for the size:

#Change one value to clearly see the effect of the size keyword
df.loc[13, "sepal length (cm)"] = 15

#Make scatterplot:
p_scatter = df.plot_bokeh.scatter(
    x="petal length (cm)",
    y="sepal width (cm)",
    category="species",
    title="Iris DataSet Visualization with Size Keyword",
    size="sepal length (cm)")

Scatterplot2

In this example you can see, that the additional dimension sepal length cannot be used to clearly differentiate between the virginica and versicolor species.

Barplot

The barplot API has no special keyword arguments, but accepts optional kwargs of bokeh.plotting.figure.vbar like alpha. It uses per default the index for the bar categories (however, also columns can be used as x-axis category using the x argument).

data = {
    'fruits':
    ['Apples', 'Pears', 'Nectarines', 'Plums', 'Grapes', 'Strawberries'],
    '2015': [2, 1, 4, 3, 2, 4],
    '2016': [5, 3, 3, 2, 4, 6],
    '2017': [3, 2, 4, 4, 5, 3]
}
df = pd.DataFrame(data).set_index("fruits")

p_bar = df.plot_bokeh.bar(
    ylabel="Price per Unit [€]", 
    title="Fruit prices per Year", 
    alpha=0.6)

Barplot

Using the stacked keyword argument you also maked stacked barplots:

p_stacked_bar = df.plot_bokeh.bar(
    ylabel="Price per Unit [€]",
    title="Fruit prices per Year",
    stacked=True,
    alpha=0.6)

Barplot2

Also horizontal versions of the above barplot are supported with the keyword kind="barh" or the accessor plot_bokeh.barh. You can still specify a column of the DataFrame as the bar category via the x argument if you do not wish to use the index.

#Reset index, such that "fruits" is now a column of the DataFrame:
df.reset_index(inplace=True)

#Create horizontal bar (via kind keyword):
p_hbar = df.plot_bokeh(
    kind="barh",
    x="fruits",
    xlabel="Price per Unit [€]",
    title="Fruit prices per Year",
    alpha=0.6,
    legend = "bottom_right",
    show_figure=False)

#Create stacked horizontal bar (via barh accessor):
p_stacked_hbar = df.plot_bokeh.barh(
    x="fruits",
    stacked=True,
    xlabel="Price per Unit [€]",
    title="Fruit prices per Year",
    alpha=0.6,
    legend = "bottom_right",
    show_figure=False)

#Plot all barplot examples in a grid:
pandas_bokeh.plot_grid([[p_bar, p_stacked_bar],
                        [p_hbar, p_stacked_hbar]], 
                       plot_width=450)

Barplot3

Histogram

For drawing histograms (kind="hist"), Pandas-Bokeh has a lot of customization features. Optional keyword arguments for histogram plots are:

bins: Determines bins to use for the histogram. If bins is an int, it defines the number of equal-width bins in the given range (10, by default). If bins is a sequence, it defines the bin edges, including the rightmost edge, allowing for non-uniform bin widths. If bins is a string, it defines the method used to calculate the optimal bin width, as defined by histogram_bin_edges.

histogram_type: Either "sidebyside", "topontop" or "stacked". Default: "topontop"

stacked: Boolean that overrides the histogram_type as "stacked" if given. Default: False

kwargs**: Optional keyword arguments of bokeh.plotting.figure.quad

Below examples of the different histogram types:

import numpy as np

df_hist = pd.DataFrame({
    'a': np.random.randn(1000) + 1,
    'b': np.random.randn(1000),
    'c': np.random.randn(1000) - 1
    },
    columns=['a', 'b', 'c'])

#Top-on-Top Histogram (Default):
df_hist.plot_bokeh.hist(
    bins=np.linspace(-5, 5, 41),
    vertical_xlabel=True,
    hovertool=False,
    title="Normal distributions (Top-on-Top)",
    line_color="black")

#Side-by-Side Histogram (multiple bars share bin side-by-side) also accessible via
#kind="hist":
df_hist.plot_bokeh(
    kind="hist",
    bins=np.linspace(-5, 5, 41),
    histogram_type="sidebyside",
    vertical_xlabel=True,
    hovertool=False,
    title="Normal distributions (Side-by-Side)",
    line_color="black")

#Stacked histogram:
df_hist.plot_bokeh.hist(
    bins=np.linspace(-5, 5, 41),
    histogram_type="stacked",
    vertical_xlabel=True,
    hovertool=False,
    title="Normal distributions (Stacked)",
    line_color="black")

Histogram

Further, advanced keyword arguments for histograms are:

weights: A column of the DataFrame that is used as weight for the histogramm aggregation (see also numpy.histogram)
normed: If True, histogram values are normed to 1 (sum of histogram values=1). It is also possible to pass an integer, e.g. normed=100 would result in a histogram with percentage y-axis (sum of histogram values=100). Default: False
cumulative: If True, a cumulative histogram is shown. Default: False
show_average: If True, the average of the histogram is also shown. Default: False

Their usage is shown in these examples:

p_hist = df_hist.plot_bokeh.hist(
    y=["a", "b"],
    bins=np.arange(-4, 6.5, 0.5),
    normed=100,
    vertical_xlabel=True,
    ylabel="Share[%]",
    title="Normal distributions (normed)",
    show_average=True,
    xlim=(-4, 6),
    ylim=(0, 30),
    show_figure=False)

p_hist_cum = df_hist.plot_bokeh.hist(
    y=["a", "b"],
    bins=np.arange(-4, 6.5, 0.5),
    normed=100,
    cumulative=True,
    vertical_xlabel=True,
    ylabel="Share[%]",
    title="Normal distributions (normed & cumulative)",
    show_figure=False)

pandas_bokeh.plot_grid([[p_hist, p_hist_cum]], plot_width=450, plot_height=300)

Histogram2

Areaplot

Areaplot (kind="area") can be either drawn on top of each other or stacked. The important parameters are:

stacked: If True, the areaplots are stacked. If False, plots are drawn on top of each other. Default: False

kwargs**: Optional keyword arguments of bokeh.plotting.figure.patch

Let us consider the energy consumption split by source that can be downloaded as DataFrame via:

df_energy = pd.read_csv(r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/energy/energy.csv", 
parse_dates=["Year"])
df_energy.head()

Year	Oil	Gas	Coal	Nuclear Energy	Hydroelectricity	Other Renewable
1970-01-01	2291.5	826.7	1467.3	17.7	265.8	5.8
1971-01-01	2427.7	884.8	1459.2	24.9	276.4	6.3
1972-01-01	2613.9	933.7	1475.7	34.1	288.9	6.8
1973-01-01	2818.1	978.0	1519.6	45.9	292.5	7.3
1974-01-01	2777.3	1001.9	1520.9	59.6	321.1	7.7

Creating the Areaplot can be achieved via:

df_energy.plot_bokeh.area(
    x="Year",
    stacked=True,
    legend="top_left",
    colormap=["brown", "orange", "black", "grey", "blue", "green"],
    title="Worldwide energy consumption split by energy source",
    ylabel="Million tonnes oil equivalent",
    ylim=(0, 16000))

areaplot

Note that the energy consumption of fossile energy is still increasing and renewable energy sources are still small in comparison 😢!!! However, when we norm the plot using the normed keyword, there is a clear trend towards renewable energies in the last decade:

df_energy.plot_bokeh.area(
    x="Year",
    stacked=True,
    normed=100,
    legend="bottom_left",
    colormap=["brown", "orange", "black", "grey", "blue", "green"],
    title="Worldwide energy consumption split by energy source",
    ylabel="Million tonnes oil equivalent")

areaplot2

Pieplot

For Pieplots, let us consider a dataset showing the results of all Bundestags elections in Germany since 2002:

df_pie = pd.read_csv(r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/Bundestagswahl/Bundestagswahl.csv")
df_pie

Partei	2002	2005	2009	2013	2017
CDU/CSU	38.5	35.2	33.8	41.5	32.9
SPD	38.5	34.2	23.0	25.7	20.5
FDP	7.4	9.8	14.6	4.8	10.7
Grünen	8.6	8.1	10.7	8.4	8.9
Linke/PDS	4.0	8.7	11.9	8.6	9.2
AfD	0.0	0.0	0.0	0.0	12.6
Sonstige	3.0	4.0	6.0	11.0	5.0

We can create a Pieplot of the last election in 2017 by specifying the "Partei" (german for party) column as the x column and the "2017" column as the y column for values:

df_pie.plot_bokeh.pie(
    x="Partei",
    y="2017",
    colormap=["blue", "red", "yellow", "green", "purple", "orange", "grey"],
    title="Results of German Bundestag Election 2017",
    )

pieplot

When you pass several columns to the y parameter (not providing the y-parameter assumes you plot all columns), multiple nested pieplots will be shown in one plot:

df_pie.plot_bokeh.pie(
    x="Partei",
    colormap=["blue", "red", "yellow", "green", "purple", "orange", "grey"],
    title="Results of German Bundestag Elections [2002-2017]",
    line_color="grey")

pieplot2

Mapplot

The mapplot method of Pandas-Bokeh allows for plotting geographic points stored in a Pandas DataFrame on an interactive map. For more advanced Geoplots for line and polygon shapes have a look at the Geoplots examples for the GeoPandas API of Pandas-Bokeh.

For mapplots, only (latitude, longitude) pairs in geographic projection (WGS84) can be plotted on a map. The basic API has the following 2 base parameters:

x: name of the longitude column of the DataFrame
y: name of the latitude column of the DataFrame

The other optional keyword arguments are discussed in the section about the GeoPandas API, e.g. category for coloring the points.

Below an example of plotting all cities for more than 1 million inhabitants:

df_mapplot = pd.read_csv(r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/populated%20places/populated_places.csv")
df_mapplot.head()

name	pop_max	latitude	longitude	size
Mesa	1085394	33.423915	-111.736084	1.085394
Sharjah	1103027	25.371383	55.406478	1.103027
Changwon	1081499	35.219102	128.583562	1.081499
Sheffield	1292900	53.366677	-1.499997	1.292900
Abbottabad	1183647	34.149503	73.199501	1.183647

df_mapplot["size"] = df_mapplot["pop_max"] / 1000000
df_mapplot.plot_bokeh.map(
    x="longitude",
    y="latitude",
    hovertool_string="""<h2> @{name} </h2> 
    
                        <h3> Population: @{pop_max} </h3>""",
    tile_provider="STAMEN_TERRAIN_RETINA",
    size="size", 
    figsize=(900, 600),
    title="World cities with more than 1.000.000 inhabitants")

Mapplot

Geoplots

Pandas-Bokeh also allows for interactive plotting of Maps using GeoPandas by providing a geopandas.GeoDataFrame.plot_bokeh() method. It allows to plot the following geodata on a map :

Points/MultiPoints
Lines/MultiLines
Polygons/MultiPolygons

Note: t is not possible to mix up the objects types, i.e. a GeoDataFrame with Points and Lines is for example not allowed.

Les us start with a simple example using the "World Borders Dataset" . Let us first import all neccessary libraries and read the shapefile:

import geopandas as gpd
import pandas as pd
import pandas_bokeh
pandas_bokeh.output_notebook()

#Read in GeoJSON from URL:
df_states = gpd.read_file(r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/states/states.geojson")
df_states.head()

STATE_NAME	REGION	POPESTIMATE2010	POPESTIMATE2011	POPESTIMATE2012	POPESTIMATE2013	POPESTIMATE2014	POPESTIMATE2015	POPESTIMATE2016	POPESTIMATE2017	geometry
Hawaii	4	1363817	1378323	1392772	1408038	1417710	1426320	1428683	1427538	(POLYGON ((-160.0738033454681 22.0041773479577...
Washington	4	6741386	6819155	6890899	6963410	7046931	7152818	7280934	7405743	(POLYGON ((-122.4020153103835 48.2252163723779...
Montana	4	990507	996866	1003522	1011921	1019931	1028317	1038656	1050493	POLYGON ((-111.4754253002074 44.70216236909688...
Maine	1	1327568	1327968	1328101	1327975	1328903	1327787	1330232	1335907	(POLYGON ((-69.77727626137293 44.0741483685119...
North Dakota	2	674518	684830	701380	722908	738658	754859	755548	755393	POLYGON ((-98.73043728833767 45.93827137024809...

Plotting the data on a map is as simple as calling:

df_states.plot_bokeh(simplify_shapes=10000)

US_States_1

We also passed the optional parameter simplify_shapes (~meter) to improve plotting performance (for a reference see shapely.object.simplify). The above geolayer thus has an accuracy of about 10km.

Many keyword arguments like xlabel, ylabel, xlim, ylim, title, colormap, hovertool, zooming, panning, ... for costumizing the plot are also available for the geoplotting API and can be uses as in the examples shown above. There are however also many other options especially for plotting geodata:

geometry_column: Specify the column that stores the geometry-information (default: "geometry")
hovertool_columns: Specify column names, for which values should be shown in hovertool
hovertool_string: If specified, this string will be used for the hovertool (@{column} will be replaced by the value of the column for the element the mouse hovers over, see also Bokeh documentation)
colormap_uselog: If set True, the colormapper is using a logscale. Default: False
colormap_range: Specify the value range of the colormapper via (min, max) tuple
tile_provider: Define build-in tile provider for background maps. Possible values: None, 'CARTODBPOSITRON', 'CARTODBPOSITRON_RETINA', 'STAMEN_TERRAIN', 'STAMEN_TERRAIN_RETINA', 'STAMEN_TONER', 'STAMEN_TONER_BACKGROUND', 'STAMEN_TONER_LABELS'. Default: CARTODBPOSITRON_RETINA
tile_provider_url: An arbitraty tile_provider_url of the form '/{Z}/{X}/{Y}*.png' can be passed to be used as background map.
tile_attribution: String (also HTML accepted) for showing attribution for tile source in the lower right corner
tile_alpha: Sets the alpha value of the background tile between [0, 1]. Default: 1

One of the most common usage of map plots are choropleth maps, where the color of a the objects is determined by the property of the object itself. There are 3 ways of drawing choropleth maps using Pandas-Bokeh, which are described below.

Dropdown

By passing a list of column names of the GeoDataFrame as the dropdown keyword argument, a dropdown menu is shown above the map. This dropdown menu can be used to select the choropleth layer by the user. :

df_states["STATE_NAME_SMALL"] = df_states["STATE_NAME"].str.lower()

df_states.plot_bokeh(
    figsize=(900, 600),
    simplify_shapes=5000,
    dropdown=["POPESTIMATE2010", "POPESTIMATE2017"],
    colormap="Viridis",
    hovertool_string="""
                        <img
                        src="https://www.states101.com/img/flags/gif/small/@STATE_NAME_SMALL.gif" 
                        height="42" alt="@imgs" width="42"
                        style="float: left; margin: 0px 15px 15px 0px;"
                        border="2"></img>
                
                        <h2>  @STATE_NAME </h2>
                        <h3> 2010: @POPESTIMATE2010 </h3>
                        <h3> 2017: @POPESTIMATE2017 </h3>""",
    tile_provider_url=r"http://c.tile.stamen.com/watercolor/{Z}/{X}/{Y}.jpg",
    tile_attribution='Map tiles by <a href="http://stamen.com">Stamen Design</a>, under <a href="http://creativecommons.org/licenses/by/3.0">CC BY 3.0</a>. Data by <a href="http://openstreetmap.org">OpenStreetMap</a>, under <a href="http://www.openstreetmap.org/copyright">ODbL</a>.'
    )

US_States_3

Using hovertool_string, one can pass a string that can contain arbitrary HTML elements (including divs, images, ...) that is shown when hovering over the geographies (@{column} will be replaced by the value of the column for the element the mouse hovers over, see also Bokeh documentation).

Here, we also used an OSM tile server with watercolor style via tile_provider_url and added the attribution via tile_attribution.

Sliders

Another option for interactive choropleth maps is the slider implementation of Pandas-Bokeh. The possible keyword arguments are here:

slider: By passing a list of column names of the GeoDataFrame, a slider can be used to . This dropdown menu can be used to select the choropleth layer by the user.
slider_range: Pass a range (or numpy.arange) of numbers object to relate the sliders values with the slider columns. By passing range(0,10), the slider will have values [0, 1, 2, ..., 9], when passing numpy.arange(3,5,0.5), the slider will have values [3, 3.5, 4, 4.5]. Default: range(0, len(slider))
slider_name: Specifies the title of the slider. Default is an empty string.

This can be used to display the change in population relative to the year 2010:


#Calculate change of population relative to 2010:
for i in range(8):
    df_states["Delta_Population_201%d"%i] = ((df_states["POPESTIMATE201%d"%i] / df_states["POPESTIMATE2010"]) -1 ) * 100

#Specify slider columns:
slider_columns = ["Delta_Population_201%d"%i for i in range(8)]

#Specify slider-range (Maps "Delta_Population_2010" -> 2010, 
#                           "Delta_Population_2011" -> 2011, ...):
slider_range = range(2010, 2018)

#Make slider plot:
df_states.plot_bokeh(
    figsize=(900, 600),
    simplify_shapes=5000,
    slider=slider_columns,
    slider_range=slider_range,
    slider_name="Year", 
    colormap="Inferno",
    hovertool_columns=["STATE_NAME"] + slider_columns,
    title="Change of Population [%]")

US_States_4

Plot multiple geolayers

If you wish to display multiple geolayers, you can pass the Bokeh figure of a Pandas-Bokeh plot via the figure keyword to the next plot_bokeh() call:

import geopandas as gpd
import pandas_bokeh
pandas_bokeh.output_notebook()

# Read in GeoJSONs from URL:
df_states = gpd.read_file(r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/states/states.geojson")
df_cities = gpd.read_file(
    r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/populated%20places/ne_10m_populated_places_simple_bigcities.geojson"
)
df_cities["size"] = df_cities.pop_max / 400000

#Plot shapes of US states (pass figure options to this initial plot):
figure = df_states.plot_bokeh(
    figsize=(800, 450),
    simplify_shapes=10000,
    show_figure=False,
    xlim=[-170, -80],
    ylim=[10, 70],
    category="REGION",
    colormap="Dark2",
    legend="States",
    show_colorbar=False,
)

#Plot cities as points on top of the US states layer by passing the figure:
df_cities.plot_bokeh(
    figure=figure,         # <== pass figure here!
    category="pop_max",
    colormap="Viridis",
    colormap_uselog=True,
    size="size",
    hovertool_string="""<h1>@name</h1>
                        <h3>Population: @pop_max </h3>""",
    marker="inverted_triangle",
    legend="Cities",
)

Multiple Geolayers

Point & Line plots:

Below, you can see an example that use Pandas-Bokeh to plot point data on a map. The plot shows all cities with a population larger than 1.000.000. For point plots, you can select the marker as keyword argument (since it is passed to bokeh.plotting.figure.scatter). Here an overview of all available marker types:

gdf = gpd.read_file(r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/populated%20places/ne_10m_populated_places_simple_bigcities.geojson")
gdf["size"] = gdf.pop_max / 400000

gdf.plot_bokeh(
    category="pop_max",
    colormap="Viridis",
    colormap_uselog=True,
    size="size",
    hovertool_string="""<h1>@name</h1>
                        <h3>Population: @pop_max </h3>""",
    xlim=[-15, 35],
    ylim=[30,60],
    marker="inverted_triangle");

Pointmap

In a similar way, also GeoDataFrames with (multi)line shapes can be drawn using Pandas-Bokeh.

Colorbar formatting:

If you want to display the numerical labels on your colorbar with an alternative to the scientific format, you can pass in a one of the bokeh number string formats or an instance of one of the bokeh.models.formatters to the colorbar_tick_format argument in the geoplot

An example of using the string format argument:

df_states = gpd.read_file(r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/states/states.geojson")

df_states["STATE_NAME_SMALL"] = df_states["STATE_NAME"].str.lower()

# pass in a string format to colorbar_tick_format to display the ticks as 10m rather than 1e7
df_states.plot_bokeh(
    figsize=(900, 600),
    category="POPESTIMATE2017",
    simplify_shapes=5000,    
    colormap="Inferno",
    colormap_uselog=True,
    colorbar_tick_format="0.0a")

colorbar_tick_format with string argument

An example of using the bokeh PrintfTickFormatter:

df_states = gpd.read_file(r"https://raw.githubusercontent.com/PatrikHlobil/Pandas-Bokeh/master/docs/Testdata/states/states.geojson")

df_states["STATE_NAME_SMALL"] = df_states["STATE_NAME"].str.lower()

for i in range(8):
    df_states["Delta_Population_201%d"%i] = ((df_states["POPESTIMATE201%d"%i] / df_states["POPESTIMATE2010"]) -1 ) * 100

# pass in a PrintfTickFormatter instance colorbar_tick_format to display the ticks with 2 decimal places  
df_states.plot_bokeh(
    figsize=(900, 600),
    category="Delta_Population_2017",
    simplify_shapes=5000,    
    colormap="Inferno",
    colorbar_tick_format=PrintfTickFormatter(format="%4.2f"))

colorbar_tick_format with bokeh.models.formatter_instance

Outputs, Formatting & Layouts

Output options

The pandas.DataFrame.plot_bokeh API has the following additional keyword arguments:

show_figure: If True, the resulting figure is shown (either in the notebook or exported and shown as HTML file, see Basics. If False, None is returned. Default: True
return_html: If True, the method call returns an HTML string that contains all Bokeh CSS&JS resources and the figure embedded in a div. This HTML representation of the plot can be used for embedding the plot in an HTML document. Default: False

If you have a Bokeh figure or layout, you can also use the pandas_bokeh.embedded_html function to generate an embeddable HTML representation of the plot. This can be included into any valid HTML (note that this is not possible directly with the HTML generated by the pandas_bokeh.output_file output option, because it includes an HTML header). Let us consider the following simple example:

#Import Pandas and Pandas-Bokeh (if you do not specify an output option, the standard is
#output_file):
import pandas as pd
import pandas_bokeh

#Create DataFrame to Plot:
import numpy as np
x = np.arange(-10, 10, 0.1)
sin = np.sin(x)
cos = np.cos(x)
tan = np.tan(x)
df = pd.DataFrame({"x": x, "sin(x)": sin, "cos(x)": cos, "tan(x)": tan})

#Make Bokeh plot from DataFrame using Pandas-Bokeh. Do not show the plot, but export
#it to an embeddable HTML string:
html_plot = df.plot_bokeh(
    kind="line",
    x="x",
    y=["sin(x)", "cos(x)", "tan(x)"],
    xticks=range(-20, 20),
    title="Trigonometric functions",
    show_figure=False,
    return_html=True,
    ylim=(-1.5, 1.5))

#Write some HTML and embed the HTML plot below it. For production use, please use
#Templates and the awesome Jinja library.
html = r"""
<script type="text/x-mathjax-config">
  MathJax.Hub.Config({tex2jax: {inlineMath: [['$','$'], ['\\(','\\)']]}});
</script>
<script type="text/javascript"
  src="http://cdn.mathjax.org/mathjax/latest/MathJax.js?config=TeX-AMS-MML_HTMLorMML">
</script>

<h1> Trigonometric functions </h1>

<p> The basic trigonometric functions are:</p>

<p>$ sin(x) $</p>
<p>$ cos(x) $</p>
<p>$ tan(x) = \frac{sin(x)}{cos(x)}$</p>

<p>Below is a plot that shows them</p>

""" + html_plot

#Export the HTML string to an external HTML file and show it:
with open("test.html" , "w") as f:
    f.write(html)
    
import webbrowser
webbrowser.open("test.html")

This code will open up a webbrowser and show the following page. As you can see, the interactive Bokeh plot is embedded nicely into the HTML layout. The return_html option is ideal for the use in a templating engine like Jinja.

Embedded HTML

Auto Scaling Plots

For single plots that have a number of x axis values or for larger monitors, you can auto scale the figure to the width of the entire jupyter cell by setting the sizing_mode parameter.

df = pd.DataFrame(np.random.rand(10, 4), columns=['a', 'b', 'c', 'd']) df.plot_bokeh(kind="bar", figsize=(500, 200), sizing_mode="scale_width")

Scaled Plot

The figsize parameter can be used to change the height and width as well as act as a scaling multiplier against the axis that is not being scaled.

Number formats

To change the formats of numbers in the hovertool, use the number_format keyword argument. For a documentation about the format to pass, have a look at the Bokeh documentation.Let us consider some examples for the number 3.141592653589793:

Format	Output
0	3
0.000	3.141
0.00 $	3.14 $

This number format will be applied to all numeric columns of the hovertool. If you want to make a very custom or complicated hovertool, you should probably use the hovertool_string keyword argument, see e.g. this example. Below, we use the number_format parameter to specify the "Stock Price" format to 2 decimal digits and an additional $ sign.

import numpy as np

#Lineplot:
np.random.seed(42)
df = pd.DataFrame({
    "Google": np.random.randn(1000) + 0.2,
    "Apple": np.random.randn(1000) + 0.17
},
                  index=pd.date_range('1/1/2000', periods=1000))
df = df.cumsum()
df = df + 50
df.plot_bokeh(
    kind="line",
    title="Apple vs Google",
    xlabel="Date",
    ylabel="Stock price [$]",
    yticks=[0, 100, 200, 300, 400],
    ylim=(0, 400),
    colormap=["red", "blue"],
    number_format="1.00 $")

Number format

Suppress scientific notation for axes

If you want to suppress the scientific notation for axes, you can use the disable_scientific_axes parameter, which accepts one of "x", "y", "xy":

df = pd.DataFrame({"Animal": ["Mouse", "Rabbit", "Dog", "Tiger", "Elefant", "Wale"],
                   "Weight [g]": [19, 3000, 40000, 200000, 6000000, 50000000]})
p_scientific = df.plot_bokeh(x="Animal", y="Weight [g]", show_figure=False)
p_non_scientific = df.plot_bokeh(x="Animal", y="Weight [g]", disable_scientific_axes="y", show_figure=False,)
pandas_bokeh.plot_grid([[p_scientific, p_non_scientific]], plot_width = 450)

Number format

Dashboard Layouts

As shown in the Scatterplot Example, combining plots with plots or other HTML elements is straighforward in Pandas-Bokeh due to the layout capabilities of Bokeh. The easiest way to generate a dashboard layout is using the pandas_bokeh.plot_grid method (which is an extension of bokeh.layouts.gridplot):

import pandas as pd
import numpy as np
import pandas_bokeh
pandas_bokeh.output_notebook()

#Barplot:
data = {
    'fruits':
    ['Apples', 'Pears', 'Nectarines', 'Plums', 'Grapes', 'Strawberries'],
    '2015': [2, 1, 4, 3, 2, 4],
    '2016': [5, 3, 3, 2, 4, 6],
    '2017': [3, 2, 4, 4, 5, 3]
}
df = pd.DataFrame(data).set_index("fruits")
p_bar = df.plot_bokeh(
    kind="bar",
    ylabel="Price per Unit [€]",
    title="Fruit prices per Year",
    show_figure=False)

#Lineplot:
np.random.seed(42)
df = pd.DataFrame({
    "Google": np.random.randn(1000) + 0.2,
    "Apple": np.random.randn(1000) + 0.17
},
                  index=pd.date_range('1/1/2000', periods=1000))
df = df.cumsum()
df = df + 50
p_line = df.plot_bokeh(
    kind="line",
    title="Apple vs Google",
    xlabel="Date",
    ylabel="Stock price [$]",
    yticks=[0, 100, 200, 300, 400],
    ylim=(0, 400),
    colormap=["red", "blue"],
    show_figure=False)

#Scatterplot:
from sklearn.datasets import load_iris
iris = load_iris()
df = pd.DataFrame(iris["data"])
df.columns = iris["feature_names"]
df["species"] = iris["target"]
df["species"] = df["species"].map(dict(zip(range(3), iris["target_names"])))
p_scatter = df.plot_bokeh(
    kind="scatter",
    x="petal length (cm)",
    y="sepal width (cm)",
    category="species",
    title="Iris DataSet Visualization",
    show_figure=False)

#Histogram:
df_hist = pd.DataFrame({
    'a': np.random.randn(1000) + 1,
    'b': np.random.randn(1000),
    'c': np.random.randn(1000) - 1
},
                       columns=['a', 'b', 'c'])

p_hist = df_hist.plot_bokeh(
    kind="hist",
    bins=np.arange(-6, 6.5, 0.5),
    vertical_xlabel=True,
    normed=100,
    hovertool=False,
    title="Normal distributions",
    show_figure=False)

#Make Dashboard with Grid Layout:
pandas_bokeh.plot_grid([[p_line, p_bar], 
                        [p_scatter, p_hist]], plot_width=450)

Dashboard Layout

Using a combination of row and column elements (see also Bokeh Layouts) allow for a very easy general arrangement of elements. An alternative layout to the one above is:

p_line.plot_width = 900
p_hist.plot_width = 900

layout = pandas_bokeh.column(p_line,
                pandas_bokeh.row(p_scatter, p_bar),
                p_hist)

pandas_bokeh.show(layout)

Alternative Dashboard Layout

Release Notes

Release Notes can be found here.

Contributing to Pandas-Bokeh

If you wish to contribute to the development of Pandas-Bokeh you can follow the instructions on the CONTRIBUTING.md.

Author: PatrikHlobil
Source Code: https://github.com/PatrikHlobil/Pandas-Bokeh
License: MIT License

#machine-learning #datavisualizations #python

Dylan Iqbal

1561523460

Matplotlib Cheat Sheet: Plotting in Python

This Matplotlib cheat sheet introduces you to the basics that you need to plot your data with Python and includes code samples.

Data visualization and storytelling with your data are essential skills that every data scientist needs to communicate insights gained from analyses effectively to any audience out there.

For most beginners, the first package that they use to get in touch with data visualization and storytelling is, naturally, Matplotlib: it is a Python 2D plotting library that enables users to make publication-quality figures. But, what might be even more convincing is the fact that other packages, such as Pandas, intend to build more plotting integration with Matplotlib as time goes on.

However, what might slow down beginners is the fact that this package is pretty extensive. There is so much that you can do with it and it might be hard to still keep a structure when you're learning how to work with Matplotlib.

DataCamp has created a Matplotlib cheat sheet for those who might already know how to use the package to their advantage to make beautiful plots in Python, but that still want to keep a one-page reference handy. Of course, for those who don't know how to work with Matplotlib, this might be the extra push be convinced and to finally get started with data visualization in Python.

You'll see that this cheat sheet presents you with the six basic steps that you can go through to make beautiful plots.

Check out the infographic by clicking on the button below:

Python Matplotlib cheat sheet

With this handy reference, you'll familiarize yourself in no time with the basics of Matplotlib: you'll learn how you can prepare your data, create a new plot, use some basic plotting routines to your advantage, add customizations to your plots, and save, show and close the plots that you make.

What might have looked difficult before will definitely be more clear once you start using this cheat sheet! Use it in combination with the Matplotlib Gallery, the documentation.

Matplotlib

Matplotlib is a Python 2D plotting library which produces publication-quality figures in a variety of hardcopy formats and interactive environments across platforms.

Prepare the Data

1D Data

>>> import numpy as np
>>> x = np.linspace(0, 10, 100)
>>> y = np.cos(x)
>>> z = np.sin(x)

2D Data or Images

>>> data = 2 * np.random.random((10, 10))
>>> data2 = 3 * np.random.random((10, 10))
>>> Y, X = np.mgrid[-3:3:100j, -3:3:100j]
>>> U = 1 X** 2 + Y
>>> V = 1 + X Y**2
>>> from matplotlib.cbook import get_sample_data
>>> img = np.load(get_sample_data('axes_grid/bivariate_normal.npy'))

Create Plot

>>> import matplotlib.pyplot as plt

Figure

>>> fig = plt.figure()
>>> fig2 = plt.figure(figsize=plt.figaspect(2.0))

Axes

>>> fig.add_axes()
>>> ax1 = fig.add_subplot(221) #row-col-num
>>> ax3 = fig.add_subplot(212)
>>> fig3, axes = plt.subplots(nrows=2,ncols=2)
>>> fig4, axes2 = plt.subplots(ncols=3)

Save Plot

>>> plt.savefig('foo.png') #Save figures
>>> plt.savefig('foo.png',  transparent=True) #Save transparent figures

Show Plot

>>> plt.show()

Plotting Routines

1D Data

>>> fig, ax = plt.subplots()
>>> lines = ax.plot(x,y) #Draw points with lines or markers connecting them
>>> ax.scatter(x,y) #Draw unconnected points, scaled or colored
>>> axes[0,0].bar([1,2,3],[3,4,5]) #Plot vertical rectangles (constant width)
>>> axes[1,0].barh([0.5,1,2.5],[0,1,2]) #Plot horiontal rectangles (constant height)
>>> axes[1,1].axhline(0.45) #Draw a horizontal line across axes
>>> axes[0,1].axvline(0.65) #Draw a vertical line across axes
>>> ax.fill(x,y,color='blue') #Draw filled polygons
>>> ax.fill_between(x,y,color='yellow') #Fill between y values and 0

2D Data

>>> fig, ax = plt.subplots()
>>> im = ax.imshow(img, #Colormapped or RGB arrays
      cmap= 'gist_earth', 
      interpolation= 'nearest',
      vmin=-2,
      vmax=2)
>>> axes2[0].pcolor(data2) #Pseudocolor plot of 2D array
>>> axes2[0].pcolormesh(data) #Pseudocolor plot of 2D array
>>> CS = plt.contour(Y,X,U) #Plot contours
>>> axes2[2].contourf(data1) #Plot filled contours
>>> axes2[2]= ax.clabel(CS) #Label a contour plot

Vector Fields

>>> axes[0,1].arrow(0,0,0.5,0.5) #Add an arrow to the axes
>>> axes[1,1].quiver(y,z) #Plot a 2D field of arrows
>>> axes[0,1].streamplot(X,Y,U,V) #Plot a 2D field of arrows

Data Distributions

>>> ax1.hist(y) #Plot a histogram
>>> ax3.boxplot(y) #Make a box and whisker plot
>>> ax3.violinplot(z)  #Make a violin plot

Plot Anatomy & Workflow

Plot Anatomy

y-axis

x-axis

Workflow

The basic steps to creating plots with matplotlib are:

1 Prepare Data
2 Create Plot
3 Plot
4 Customized Plot
5 Save Plot
6 Show Plot

>>> import matplotlib.pyplot as plt
>>> x = [1,2,3,4]  #Step 1
>>> y = [10,20,25,30] 
>>> fig = plt.figure() #Step 2
>>> ax = fig.add_subplot(111) #Step 3
>>> ax.plot(x, y, color= 'lightblue', linewidth=3)  #Step 3, 4
>>> ax.scatter([2,4,6],
          [5,15,25],
          color= 'darkgreen',
          marker= '^' )
>>> ax.set_xlim(1, 6.5)
>>> plt.savefig('foo.png' ) #Step 5
>>> plt.show() #Step 6

Close and Clear

>>> plt.cla()  #Clear an axis
>>> plt.clf(). #Clear the entire figure
>>> plt.close(). #Close a window

Plotting Customize Plot

Colors, Color Bars & Color Maps

>>> plt.plot(x, x, x, x**2, x, x** 3)
>>> ax.plot(x, y, alpha = 0.4)
>>> ax.plot(x, y, c= 'k')
>>> fig.colorbar(im, orientation= 'horizontal')
>>> im = ax.imshow(img,
            cmap= 'seismic' )

Markers

>>> fig, ax = plt.subplots()
>>> ax.scatter(x,y,marker= ".")
>>> ax.plot(x,y,marker= "o")

Linestyles

>>> plt.plot(x,y,linewidth=4.0)
>>> plt.plot(x,y,ls= 'solid') 
>>> plt.plot(x,y,ls= '--') 
>>> plt.plot(x,y,'--' ,x**2,y**2,'-.' ) 
>>> plt.setp(lines,color= 'r',linewidth=4.0)

Text & Annotations

>>> ax.text(1,
           -2.1, 
           'Example Graph', 
            style= 'italic' )
>>> ax.annotate("Sine", 
xy=(8, 0),
xycoords= 'data', 
xytext=(10.5, 0),
textcoords= 'data', 
arrowprops=dict(arrowstyle= "->", 
connectionstyle="arc3"),)

Mathtext

>>> plt.title(r '$sigma_i=15$', fontsize=20)

Limits, Legends and Layouts

Limits & Autoscaling

>>> ax.margins(x=0.0,y=0.1) #Add padding to a plot
>>> ax.axis('equal')  #Set the aspect ratio of the plot to 1
>>> ax.set(xlim=[0,10.5],ylim=[-1.5,1.5])  #Set limits for x-and y-axis
>>> ax.set_xlim(0,10.5) #Set limits for x-axis

Legends

>>> ax.set(title= 'An Example Axes',  #Set a title and x-and y-axis labels
            ylabel= 'Y-Axis', 
            xlabel= 'X-Axis')
>>> ax.legend(loc= 'best')  #No overlapping plot elements

Ticks

>>> ax.xaxis.set(ticks=range(1,5),  #Manually set x-ticks
             ticklabels=[3,100, 12,"foo" ])
>>> ax.tick_params(axis= 'y', #Make y-ticks longer and go in and out
             direction= 'inout', 
              length=10)

Subplot Spacing

>>> fig3.subplots_adjust(wspace=0.5,   #Adjust the spacing between subplots
             hspace=0.3,
             left=0.125,
             right=0.9,
             top=0.9,
             bottom=0.1)
>>> fig.tight_layout() #Fit subplot(s) in to the figure area

Axis Spines

>>> ax1.spines[ 'top'].set_visible(False) #Make the top axis line for a plot invisible
>>> ax1.spines['bottom' ].set_position(( 'outward',10))  #Move the bottom axis line outward

Have this Cheat Sheet at your fingertips

Original article source at https://www.datacamp.com

#matplotlib #cheatsheet #python

Three Projects to Make You a Better Programmer

A purposeful selection

Why should we use projects to learn?

What is GEEK

Buddha Community

Top Android Projects with Source Code

Android Projects with Source Code

Android Projects for beginners

1. Calculator

2. A Reminder App

3. Quiz Application

4. Simple Tic-Tac-Toe

5. Stopwatch

6. To Do App

7. Roman to decimal converter

8. Virtual Dice Roller

9. A Scientific Calculator App

10. SMS App

10 Writing steps to create a good project brief - Mobile app development

Why a Good Mobile App Project Brief Matters?

Writing Steps to Create a Good Mobile App Project Brief

1. Establish the “You” Behind the App

42 Exciting Python Project Ideas & Topics for Beginners [2021]

Python Project Ideas

Bokeh Plotting Backend for Pandas and GeoPandas

Interactive Documentation

Installation

How To Use

Classical Use

Notebook output (see also bokeh.io.output_notebook)

File output to "Interactive Plot.html" (see also bokeh.io.output_file)

Pandas-Bokeh as native Pandas plotting backend

Plot types

Lineplot

Basic Lineplot

Advanced Lineplot

Lineplot with data points

Lineplot with rangetool

Stepplot

Scatterplot

Barplot

Histogram

Areaplot

Geoplots

Categories

Dropdown

Sliders

Plot multiple geolayers

Point & Line plots:

Colorbar formatting:

Outputs, Formatting & Layouts

Output options

Auto Scaling Plots

Number formats

Suppress scientific notation for axes

Dashboard Layouts

Matplotlib Cheat Sheet: Plotting in Python

Prepare the Data

1D Data

2D Data or Images

Create Plot

Figure

Axes

Save Plot

Show Plot

Plotting Routines

1D Data

2D Data

Vector Fields

Data Distributions

Plot Anatomy & Workflow

Plot Anatomy

Workflow

Close and Clear

Plotting Customize Plot

Colors, Color Bars & Color Maps

Markers

Linestyles

Text & Annotations

Mathtext