Rupert  Beatty

Rupert Beatty

1671636240

How to Different Methods Are Used in String Operation – Scala

Scala Strings are one of the most important features of scala. Basically, it is a sequence of characters that uses the linear approach to store data. In scala, the string is immutable in nature and hence we cannot change its original state. Scala language provides us various methods to play with strings we can use these methods on strings to get the desired output. If you want to know about these methods then this blog is for you.

Scala string method for splitting a string

split

In Scala, we can use the split method to split strings into an array of strings. The split method uses specific separators such as commas to separate strings. Let’s see how the split method work using the below example.

Scala string split

The output of the above code is

Scala string split output

Scala string methods for Comparing Strings

There are various built-in methods in scala for string comparison like matches, equalsIgnoreCase, equals. Let us discuss what are these methods and how they work.

matches

This built-in method is used to match regular expressions with an entire string. It returns true if the string matches and false if it doesn’t match. Let’s see how the matches method work using the below example.

Scala string matches

The output of the above code is

matches output

equals

The equals the method work similarly to ‘==’. It returns true when both values are identical and returns false when both values are not identical.Let’s see how the equals method work using the below example.

equals

The output of the above code is

equal output

equalsIgnoreCase

The equalsIgnoreCase the method work similarly to equals method. The only difference between these methods is that equalsIgnoreCase is ignoring case sensitivity. It means for equalsIgnoreCase “a” and “A” are the same. Let’s see how the equalsIgnoreCase method work using the below example.

equalsIgnoreCase Scala String

The output of the above code is

equalsIgnoreCase output

Scala string method for replacing Patterns in Strings

replaceFirst

The replaceFirst method is used to replace the first matching occurrence of an expression in a string. Let’s see how the replaceFirst method work using the below example.

Scala String

The output of the above code is

Scala String

replaceAll

The replaceAll method is used to replace all matching occurrences of an expression in a string. Let’s see how the replaceFirst method work using the below example.

Scala String

The output of the above code is

Scala String

Conclusion

In this blog, we get to know about various methods in scala which we can perform on a string to get desired output.

Original article source at: https://blog.knoldus.com/

#scala #string 

What is GEEK

Buddha Community

How to Different Methods Are Used in String Operation – Scala
Chloe  Butler

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

  1. Design the PCB using your favorite CAD or drawing software.
  2. Print the top and bottom copper and top silk screen layers to a PDF file.
  3. Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
  4. Use a Gerber viewer to double-check the output against the original PCB design.
  5. Make adjustments as needed.
  6. Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.


pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl 

Rupert  Beatty

Rupert Beatty

1671636240

How to Different Methods Are Used in String Operation – Scala

Scala Strings are one of the most important features of scala. Basically, it is a sequence of characters that uses the linear approach to store data. In scala, the string is immutable in nature and hence we cannot change its original state. Scala language provides us various methods to play with strings we can use these methods on strings to get the desired output. If you want to know about these methods then this blog is for you.

Scala string method for splitting a string

split

In Scala, we can use the split method to split strings into an array of strings. The split method uses specific separators such as commas to separate strings. Let’s see how the split method work using the below example.

Scala string split

The output of the above code is

Scala string split output

Scala string methods for Comparing Strings

There are various built-in methods in scala for string comparison like matches, equalsIgnoreCase, equals. Let us discuss what are these methods and how they work.

matches

This built-in method is used to match regular expressions with an entire string. It returns true if the string matches and false if it doesn’t match. Let’s see how the matches method work using the below example.

Scala string matches

The output of the above code is

matches output

equals

The equals the method work similarly to ‘==’. It returns true when both values are identical and returns false when both values are not identical.Let’s see how the equals method work using the below example.

equals

The output of the above code is

equal output

equalsIgnoreCase

The equalsIgnoreCase the method work similarly to equals method. The only difference between these methods is that equalsIgnoreCase is ignoring case sensitivity. It means for equalsIgnoreCase “a” and “A” are the same. Let’s see how the equalsIgnoreCase method work using the below example.

equalsIgnoreCase Scala String

The output of the above code is

equalsIgnoreCase output

Scala string method for replacing Patterns in Strings

replaceFirst

The replaceFirst method is used to replace the first matching occurrence of an expression in a string. Let’s see how the replaceFirst method work using the below example.

Scala String

The output of the above code is

Scala String

replaceAll

The replaceAll method is used to replace all matching occurrences of an expression in a string. Let’s see how the replaceFirst method work using the below example.

Scala String

The output of the above code is

Scala String

Conclusion

In this blog, we get to know about various methods in scala which we can perform on a string to get desired output.

Original article source at: https://blog.knoldus.com/

#scala #string 

Myrl  Prosacco

Myrl Prosacco

1594461240

Use of Either in Scala

In this blog, we are going to see the use of Either in scala.

We use Options in scala but why do we want to go for Either?

Either is a better approach in the respect that if something fails we can track down the reason, which in Option None case is not possible.

We simply pass None but what is the reason we got None instead of Some. We will see how to tackle this scenario using Either.

Either[Left, Right]

None is similar to Left which signifies Failure and Some is similar to Right which signifies Success.

Let’s see with help of an example:

def returnEither(value: String): Either[NumberFormatException, Int] =
{
try {
Right(value.toInt)
} catch {
case ex: NumberFormatException => Left(ex)
}
}
returnEither("abc").map(x => println(x))

It will not print anything, Either is right biased and returnEither(“abc”) gives Left(java.lang.NumberFormatException: For input string: “abc”)

Now let’s call it on Right value.

returnEither("1").map(x => println(x))

It will print 1. Yes, it is right biased as the map works on Either.right. What if I want to call the map on left?

returnEither("abc").left.map(x => println(x))

It will print** java.lang.NumberFormatException: For input string: “abc”.**

Using Match case with Either

returnEither("1") match
{
case Right(value) => println(s"Right value: $value")
case Left(ex: NumberFormatException) => println(ex)
}

It will print Right value: 1

Extract value from Either

Let’s say we want to extract left value from Either.

println(returnEither("abc").left)

will print LeftProjection(Left(java.lang.NumberFormatException: For input string: “abc”))

println(returnEither("1").left)

will print LeftProjection(Right(1)).

println(returnEither("abc").left.get)

will give java.lang.NumberFormatException: For input string: “abc”.

println(returnEither("1").left.get)

will give: Exception in thread “main” java.util.NoSuchElementException: Either.left.get on Right

Oops. It had right value.

We can use getOrElse or fold for default value.

#scala ##use of either ##use of either in scala #either #scala

Brook  Legros

Brook Legros

1659199883

String Pattern: Generate Strings Supplying A Simple Pattern in Ruby

StringPattern

With this gem, you can easily generate strings supplying a very simple pattern. Even generate random words in English or Spanish. Also, you can validate if a text fulfills a specific pattern or even generate a string following a pattern and returning the wrong length, value... for testing your applications. Perfect to be used in test data factories.

Also you can use regular expressions (Regexp) to generate strings: /[a-z0-9]{2,5}\w+/.gen

To do even more take a look at nice_hash gem

Installation

Add this line to your application's Gemfile:

gem 'string_pattern'

And then execute:

$ bundle

Or install it yourself as:

$ gem install string_pattern

Usage

What is a string pattern?

A pattern is a string where we supply these elements "a-b:c" where a is min_length, b is max_length (optional) and c is a set of symbol_type

min_length: minimum length of the string

max_length (optional): maximum length of the string. If not provided, the result will be with the min_length provided

symbol_type: The type of the string we want.
    x: from a to z (lowercase)
    X: A to Z (capital letters)
    L: A to Z and a to z
    T: National characters defined on StringPattern.national_chars
    n or N: for numbers. 0 to 9
    $: special characters, $%&#...  (includes blank space)
    _: blank space
    *: all characters
    0: empty string will be accepted.  It needs to be at the beginning of the symbol_type string
        @: It will generate a valid email following the official algorithm. It cannot be used with other symbol_type
        W: for English words, capital and lower. It cannot be used with other symbol_type
        w: for English words only lower and words separated by underscore. It cannot be used with other symbol_type
        P: for Spanish words, capital and lower. It cannot be used with other symbol_type
        p: for Spanish words only lower and words separated by underscore. It cannot be used with other symbol_type
    

How to generate a string following a pattern

To generate a string following a pattern you can do it using directly the StringPattern class or the generate method in the class, be aware you can always use also the alias method: gen

require 'string_pattern'

#StringPattern class
p StringPattern.generate "10:N"
#>3448910834
p StringPattern.gen "5:X"
#>JDDDK

#String class
p "4:Nx".gen
#>xaa3

#Symbol class
p :"10:T".generate
#>AccBdjklñD

#Array class
p [:"3:N", "fixed", :"3:N"].gen
#>334fixed920
p "(,3:N,) ,3:N,-,2:N,-,2:N".split(',').generate 
#>(937) 980-65-05

#Kernel
p gen "3:N"
#>443

Generating unique strings

If you want to generate for example 1000 strings and be sure all those strings are different you can use:

StringPattern.dont_repeat = true #default: false
1000.times {
    puts :"6-20:L/N/".gen
}
StringPattern.cache_values = Hash.new() #to clean the generated values from memory

Using dont_repeat all the generated string during the current run will be unique.

In case you just want one particular string to be unique but not the rest then add to the pattern just in the end the symbol: &

The pattern needs to be a symbol object.

1000.times {
    puts :"6-20:L/N/&".gen #will be unique
    puts :"10:N".gen
}

Generate words randomly in English or Spanish

To generate a string of the length you want that will include only real words, use the symbol types:

  • W: generates English words following CamelCase ('ExampleOutput')
  • w: generates English words following snake_case ('example_output')
  • P: generates Spanish words following CamelCase ('EjemploSalida')
  • p: generates Spanish words following snake_case ('ejemplo_salida')
require 'string_pattern'

puts '10-30:W'.gen
#> FirstLieutenant
puts '10-30:w'.gen
#> paris_university
puts '10-30:P'.gen
#> SillaMetalizada
puts '10-30:p'.gen
#> despacho_grande

If you want to use a different word separator than "_" when using 'w' or 'p':

# blank space for example
require 'string_pattern'

StringPattern.word_separator = ' '

puts '10-30:w'.gen
#> paris university
puts '10-30:p'.gen
#> despacho grande

The word list is loaded on the first request to generate words, after that the speed to generate words increases amazingly. 85000 English words and 250000 Spanish words. The vocabularies are a sample of public open sources.

Generate strings using Regular Expressions (Regexp)

Take in consideration this feature is not supporting all possibilities for Regular expressions but it is fully functional. If you find any bug or limitation please add it to issues: https://github.com/MarioRuiz/string_pattern/issues

In case you want to change the default maximum for repetitions when using * or +: StringPattern.default_infinite = 30 . By default is 10.

If you want to translate a regular expression into an StringPattern use the method we added to Regexp class: to_sp

Examples:

/[a-z0-9]{2-5}\w+/.to_sp
#> ["2-5:nx", "1-10:Ln_"]

#regular expression for UUID v4
/[0-9A-F]{8}-[0-9A-F]{4}-4[0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}/.to_sp
#> ["8:n[ABCDEF]", "-", "4:n[ABCDEF]", "-4", "3:n[ABCDEF]", "-", "1:[89AB]", "3:n[ABCDEF]", "-", "12:n[ABCDEF]"]

If you want to generate a random string following the regular expression, you can do it like a normal string pattern:


regexp = /[0-9A-F]{8}-[0-9A-F]{4}-4[0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}/

# using StringPattern class
puts StringPattern.generate(regexp)

# using Kernel
puts generate(regexp)

# using generate method added to Regexp class
puts regexp.generate

#using the alias 'gen'
puts regexp.gen 

# output:
#>7009574B-6F2F-436E-BB7A-EA5FDA6B4E47
#>5FB1718F-108A-4F62-8170-33C43FD86B1D
#>05745B6F-93BA-475F-8118-DD56E5EAC4D1
#>2D6FC189-8D50-45A8-B182-780193838502

String patterns

How to generate one or another string

In case you need to specify that the string is generated selecting one or another fixed string or pattern, you can do it by using Array of patterns and in the position you want you can add an array with the possible values

p ["uno:", :"5:N", ['.red','.green', :'3:L'] ].gen

# first position a fixed string: "uno:"
# second position 5 random numbers
# third position one of these values: '.red', '.green' or 3 letters

# example output: 
# 'uno:34322.red'
# 'uno:44432.green'
# 'uno:34322.red'
# 'uno:28795xAB'

Take in consideration that this is only available to generate successful strings but not for validation

Custom characters

Also, it's possible to provide the characters we want. To do that we'll use the symbol_type [characters]

If we want to add the character ] we have to write ]]

Examples

# four chars from the ones provided: asDF9
p "4:[asDF9]".gen    #> aaaa, asFF, 9sFD

# from 2 to 20 chars, capital and lower chars (Xx) and also valid the characters $#6
p "2-20:[$#6]Xx".gen    #> aaaa, asFF, 66, B$DkKL#9aDD
 
# four chars from these: asDF]9
p "4:[asDF]]9]".gen    #> aa]a, asFF, 9s]D

Required characters or symbol types

We'll use the symbol / to specify which characters or symbols we want to be included on the resulting string as required values /symbols or characters/

If we need to add the character / we'll use //

Examples:

# four characters. optional: capitals and numbers, required: lower
"4:XN/x/".gen    # aaaa, FF9b, j4em, asdf, ADFt

# from 6 to 15 chars. optional: numbers, capitals and the chars $ and Æ. required the chars: 23abCD
"6-15:[/23abCD/$Æ]NX".gen    # bCa$D32, 32DJIOKLaCb, b23aD568C
 
# from 4 to 9 chars. optional: numbers and capitals. required: lowers and the characters $ and 5
"4-9:[/$5/]XN/x/".generate    # aa5$, F5$F9b, j$4em5, a5sdf$, $ADFt5 

Excluded characters

If we want to exclude a few characters in the result, we'll use the symbol %characters%

If you need to exclude the character %, you should use %%

Examples:

# from 2 to 20 characters. optional: Numbers and characters A, B and C. excluded: the characters 8 and 3
"2-20:[%83%ABC]N".gen    # B49, 22900, 9CAB, 22, 11CB6270C26C4572A50C

# 10 chars. optional: Letters (capital and lower). required: numbers. excluded: the characters 0 and WXYzZ
"10:L/n/[%0WXYzZ%]".gen    # GoO2ukCt4l, Q1Je2remFL, qPg1T92T2H, 4445556781

Not fulfilling a pattern

If we want our resulting string doesn't fulfill the pattern we supply, then we'll use the symbol ! at the beginning

Examples:

"!4:XN/x/".gen    # a$aaa, FF9B, j4DDDem, as, 2345

"!10:N".gen     # 123, 34899Add34, 3434234234234008, AAFj#kd2x

Generate a string with specific expected errors

Usually, for testing purposes you need to generate strings that don't fulfill a specific pattern, then you can supply as a parameter expected_errors (alias: errors)

The possible values you can specify is one or more of these ones: :length, :min_length, :max_length, :value, :required_data, :excluded_data, :string_set_not_allowed

:length: wrong length, minimum or maximum
:min_length: wrong minimum length
:max_length: wrong maximum length
:value: wrong resultant value
:required_data: the output string won't include all necessary required data. It works only if required data supplied on the pattern.
:excluded_data: the resultant string will include one or more characters that should be excluded. It works only if excluded data supplied on the pattern.
:string_set_not_allowed: it will include one or more characters that are not supposed to be on the string.

Examples:

"10-20:N".gen errors: [:min_length]
#> 627, 098262, 3408

"20:N".gen errors: [:length, :value]
#> |13, tS1b)r-1)<RT65202eTo6bV0g~, 021400323<2ahL0NP86a698063*56076

"10:L/n/".gen errors: [:value]
#> 1hwIw;v{KQ, mpk*l]!7:!, wocipgZt8@

Validate if a string is following a pattern

If you need to validate if a specific text is fulfilling the pattern you can use the validate method.

If a string pattern supplied and no other parameters supplied the output will be an array with the errors detected.

Possible output values, empty array (validation without errors detected) or one or more of: :min_length, :max_length, :length, :value, :string_set_not_allowed, :required_data, :excluded_data

In case an array of patterns supplied it will return only true or false

Examples:

#StringPattern class
StringPattern.validate((text: "This text will be validated", pattern: :"10-20:Xn")
#> [:max_length, :length, :value, :string_set_not_allowed]

#String class
"10:N".validate "333444"
#> [:min_length, :length]

#Symbol class
:"10:N".validate("333444")
#> [:min_length, :length]

#Array class
["5:L","3:xn","4-10:n"].validate "DjkljFFc343444390"
#> false

If we want to validate a string with a pattern and we are expecting to get specific errors, you can supply the parameter expected_errors (alias: errors) or not_expected_errors (aliases: non_expected_errors, not_errors).

In this case, the validate method will return true or false.

Examples:

"10:N".val "3445", errors: [:min_length]
#> true

"10:N/[09]/".validate "4434039440", errors: [:value]
#> false

"10-12:XN/x/".validate "FDDDDDAA343434", errors: [:max_length, :required_data]
#> true

Configure

SP_ADD_TO_RUBY

This gem adds the methods generate (alias: gen) and validate (alias: val) to the Ruby classes: String, Array, and Symbol.

Also adds the method generate (alias: gen) to Kernel. By default (true) it is always added.

In case you don't want to be added, just before requiring the library set:

SP_ADD_TO_RUBY = false
require 'string_pattern'

In case it is set to true (default) then you will be able to use:

require 'string_pattern'

#String object
"20-30:@".gen 
#>dkj34MljjJD-df@jfdluul.dfu

"10:L/N/[/-./%d%]".validate("12ds6f--.s") 
#>[:value, :string_set_not_allowed]

"20-40:@".validate(my_email)

#Kernel
gen "10:N"
#>3433409877

#Array object
"(,3:N,) ,3:N,-,2:N,-,2:N".split(",").generate 
#>(937) 980-65-05

%w{( 3:N ) 1:_ 3:N - 2:N - 2:N}.gen 
#>(045) 448-63-09

["1:L", "5-10:LN", "-", "3:N"].gen 
#>zqWihV-746

national_chars

To specify which national characters will be used when using the symbol type: T, you use StringPattern.national_chars, by default is the English alphabet

StringPattern.national_chars = (('a'..'z').to_a + ('A'..'Z').to_a).join + "áéíóúÁÉÍÓÚüÜñÑ"
"10-20:Tn".gen #>AAñ34Ef99éNOP

optimistic

If true it will check on the strings of the array positions supplied if they have the pattern format and assume in that case that is a pattern. If not it will assume the patterns on the array will be supplied as symbols. By default is set to true.

StringPattern.optimistic = false
["5:X","fixedtext", "3:N"].generate
#>5:Xfixedtext3:N
[:"5:X","fixedtext", :"3:N"].generate
#>AUJKJfixedtext454

StringPattern.optimistic = true
["5:X","fixedtext", "3:N"].generate
#>KKDMEfixedtext344
[:"5:X","fixedtext", :"3:N"].generate
#>SAAERfixedtext988

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/marioruiz/string_pattern.

License

The gem is available as open source under the terms of the MIT License.


Author: MarioRuiz
Source code: https://github.com/MarioRuiz/string_pattern
License: MIT license

#ruby  #ruby-on-rails 

Why Use WordPress? What Can You Do With WordPress?

Can you use WordPress for anything other than blogging? To your surprise, yes. WordPress is more than just a blogging tool, and it has helped thousands of websites and web applications to thrive. The use of WordPress powers around 40% of online projects, and today in our blog, we would visit some amazing uses of WordPress other than blogging.
What Is The Use Of WordPress?

WordPress is the most popular website platform in the world. It is the first choice of businesses that want to set a feature-rich and dynamic Content Management System. So, if you ask what WordPress is used for, the answer is – everything. It is a super-flexible, feature-rich and secure platform that offers everything to build unique websites and applications. Let’s start knowing them:

1. Multiple Websites Under A Single Installation
WordPress Multisite allows you to develop multiple sites from a single WordPress installation. You can download WordPress and start building websites you want to launch under a single server. Literally speaking, you can handle hundreds of sites from one single dashboard, which now needs applause.
It is a highly efficient platform that allows you to easily run several websites under the same login credentials. One of the best things about WordPress is the themes it has to offer. You can simply download them and plugin for various sites and save space on sites without losing their speed.

2. WordPress Social Network
WordPress can be used for high-end projects such as Social Media Network. If you don’t have the money and patience to hire a coder and invest months in building a feature-rich social media site, go for WordPress. It is one of the most amazing uses of WordPress. Its stunning CMS is unbeatable. And you can build sites as good as Facebook or Reddit etc. It can just make the process a lot easier.
To set up a social media network, you would have to download a WordPress Plugin called BuddyPress. It would allow you to connect a community page with ease and would provide all the necessary features of a community or social media. It has direct messaging, activity stream, user groups, extended profiles, and so much more. You just have to download and configure it.
If BuddyPress doesn’t meet all your needs, don’t give up on your dreams. You can try out WP Symposium or PeepSo. There are also several themes you can use to build a social network.

3. Create A Forum For Your Brand’s Community
Communities are very important for your business. They help you stay in constant connection with your users and consumers. And allow you to turn them into a loyal customer base. Meanwhile, there are many good technologies that can be used for building a community page – the good old WordPress is still the best.
It is the best community development technology. If you want to build your online community, you need to consider all the amazing features you get with WordPress. Plugins such as BB Press is an open-source, template-driven PHP/ MySQL forum software. It is very simple and doesn’t hamper the experience of the website.
Other tools such as wpFoRo and Asgaros Forum are equally good for creating a community blog. They are lightweight tools that are easy to manage and integrate with your WordPress site easily. However, there is only one tiny problem; you need to have some technical knowledge to build a WordPress Community blog page.

4. Shortcodes
Since we gave you a problem in the previous section, we would also give you a perfect solution for it. You might not know to code, but you have shortcodes. Shortcodes help you execute functions without having to code. It is an easy way to build an amazing website, add new features, customize plugins easily. They are short lines of code, and rather than memorizing multiple lines; you can have zero technical knowledge and start building a feature-rich website or application.
There are also plugins like Shortcoder, Shortcodes Ultimate, and the Basics available on WordPress that can be used, and you would not even have to remember the shortcodes.

5. Build Online Stores
If you still think about why to use WordPress, use it to build an online store. You can start selling your goods online and start selling. It is an affordable technology that helps you build a feature-rich eCommerce store with WordPress.
WooCommerce is an extension of WordPress and is one of the most used eCommerce solutions. WooCommerce holds a 28% share of the global market and is one of the best ways to set up an online store. It allows you to build user-friendly and professional online stores and has thousands of free and paid extensions. Moreover as an open-source platform, and you don’t have to pay for the license.
Apart from WooCommerce, there are Easy Digital Downloads, iThemes Exchange, Shopify eCommerce plugin, and so much more available.

6. Security Features
WordPress takes security very seriously. It offers tons of external solutions that help you in safeguarding your WordPress site. While there is no way to ensure 100% security, it provides regular updates with security patches and provides several plugins to help with backups, two-factor authorization, and more.
By choosing hosting providers like WP Engine, you can improve the security of the website. It helps in threat detection, manage patching and updates, and internal security audits for the customers, and so much more.

Read More

#use of wordpress #use wordpress for business website #use wordpress for website #what is use of wordpress #why use wordpress #why use wordpress to build a website