Write asynchronous code in a breeze with async and await

Writing asynchronous code is very common these days. Callback structured code can be difficult to read, write and maintain. Promises were a step forward. async and await makes writing (and reading) asynchronous code a breeze!

In this post we are going to explore some sample asynchronous code using async and await in TypeScript.

Asynchronous Functions

Asynchronous code that calls a web service is pretty common these days. So, let’s create an asynchronous function that calls a web service to get some data using async and await.

There are 3 main points of note in our function:

• Our function contains a call to the fetch function. The await keyword allows fetch to be called in an asynchronous manner with the execution of the next line blocked until fetch returns
• Our function is prefixed with the async keyword because we are referencing the await keyword and executing asynchronous code within our function. The async keyword allows our function to be called in an asynchronous manner with await
• Our async function needs to return a Promise

#visual studio code

What is GEEK

Buddha Community

How to Use Hotwire Rails

Introduction

We are back with another exciting and much-talked-about Rails tutorial on how to use Hotwire with the Rails application. This Hotwire Rails tutorial is an alternate method for building modern web applications that consume a pinch of JavaScript.

Rails 7 Hotwire is the default front-end framework shipped with Rails 7 after it was launched. It is used to represent HTML over the wire in the Rails application. Previously, we used to add a hotwire-rails gem in our gem file and then run rails hotwire: install. However, with the introduction of Rails 7, the gem got deprecated. Now, we use turbo-rails and stimulus rails directly, which work as Hotwire’s SPA-like page accelerator and Hotwire’s modest JavaScript framework.

What is Hotwire?

Hotwire is a package of different frameworks that help to build applications. It simplifies the developer’s work for writing web pages without the need to write JavaScript, and instead sending HTML code over the wire.

Introduction to The Hotwire Framework:

1. Turbo:

It uses simplified techniques to build web applications while decreasing the usage of JavaScript in the application. Turbo offers numerous handling methods for the HTML data sent over the wire and displaying the application’s data without actually loading the entire page. It helps to maintain the simplicity of web applications without destroying the single-page application experience by using the below techniques:

Turbo Frames: Turbo Frames help to load the different sections of our markup without any dependency as it divides the page into different contexts separately called frames and updates these frames individually.
Turbo Drive: Every link doesn’t have to make the entire page reload when clicked. Only the HTML contained within the tag will be displayed.
Turbo Streams: To add real-time features to the application, this technique is used. It helps to bring real-time data to the application using CRUD actions.

2. Stimulus

It represents the JavaScript framework, which is required when JS is a requirement in the application. The interaction with the HTML is possible with the help of a stimulus, as the controllers that help those interactions are written by a stimulus.

3. Strada

Not much information is available about Strada as it has not been officially released yet. However, it works with native applications, and by using HTML bridge attributes, interaction is made possible between web applications and native apps.

Simple diagrammatic representation of Hotwire Stack:

Prerequisites For Hotwire Rails Tutorial

As we are implementing the Ruby on Rails Hotwire tutorial, make sure about the following installations before you can get started.

• Ruby on Rails
• Hotwire gem
• PostgreSQL/SQLite (choose any one database)
• Turbo Rails
• Stimulus.js

Looking for an enthusiastic team of ROR developers to shape the vision of your web project?
Contact Bacancy today and hire Ruby developers to start building your dream project!

Create a new Rails Project

Find the following commands to create a rails application.

mkdir ~/projects/railshotwire
cd ~/projects/railshotwire
echo "source 'https://rubygems.org'" > Gemfile
echo "gem 'rails', '~> 7.0.0'" >> Gemfile
bundle install  
bundle exec rails new . --force -d=postgresql

Now create some files for the project, up till now no usage of Rails Hotwire can be seen.
Fire the following command in your terminal.

• For creating a default controller for the application

echo "class HomeController < ApplicationController" > app/controllers/home_controller.rb
echo "end" >> app/controllers/home_controller.rb

• For creating another controller for the application

echo "class OtherController < ApplicationController" > app/controllers/other_controller.rb
echo "end" >> app/controllers/home_controller.rb

• For creating routes for the application

echo "Rails.application.routes.draw do" > config/routes.rb
echo '  get "home/index"' >> config/routes.rb
echo '  get "other/index"' >> config/routes.rb
echo '  root to: "home#index"' >> config/routes.rb
echo 'end' >> config/routes.rb

• For creating a default view for the application

mkdir app/views/home
echo '<h1>This is Rails Hotwire homepage</h1>' > app/views/home/index.html.erb
echo '<div><%= link_to "Enter to other page", other_index_path %></div>' >> app/views/home/index.html.erb

• For creating another view for the application

mkdir app/views/other
echo '<h1>This is Another page</h1>' > app/views/other/index.html.erb
echo '<div><%= link_to "Enter to home page", root_path %></div>' >> app/views/other/index.html.erb

• For creating a database and schema.rb file for the application

bin/rails db:create
bin/rails db:migrate

• For checking the application run bin/rails s and open your browser, your running application will have the below view.

Additionally, you can clone the code and browse through the project. Here’s the source code of the repository: Rails 7 Hotwire application

Now, let’s see how Hotwire Rails can work its magic with various Turbo techniques.

Hotwire Rails: Turbo Drive

Go to your localhost:3000 on your web browser and right-click on the Inspect and open a Network tab of the DevTools of the browser.

Now click on go to another page link that appears on the home page to redirect from the home page to another page. In our Network tab, we can see that this action of navigation is achieved via XHR. It appears only the part inside HTML is reloaded, here neither the CSS is reloaded nor the JS is reloaded when the navigation action is performed.

By performing this action we can see that Turbo Drive helps to represent the HTML response without loading the full page and only follows redirect and reindeer HTML responses which helps to make the application faster to access.

Hotwire Rails: Turbo Frame

This technique helps to divide the current page into different sections called frames that can be updated separately independently when new data is added from the server.
Below we discuss the different use cases of Turbo frame like inline edition, sorting, searching, and filtering of data.

Let’s perform some practical actions to see the example of these use cases.

Make changes in the app/controllers/home_controller.rb file

#CODE

class HomeController < ApplicationController
   def turbo_frame_form
   end
   
   def turbo_frame submit
      extracted_anynumber = params[:any][:anynumber]
      render :turbo_frame_form, status: :ok, locals: {anynumber: extracted_anynumber,      comment: 'turbo_frame_submit ok' }
   end
end

Add app/views/home/turbo_frame_form.html.erb file to the application and add this content inside the file.

#CODE

<section>

    <%= turbo_frame_tag 'anyframe' do %>
            
      <div>
          <h2>Frame view</h2>
          <%= form_with scope: :any, url: turbo_frame_submit_path, local: true do |form| %>
              <%= form.label :anynumber, 'Type an integer (odd or even)', 'class' => 'my-0  d-inline'  %>
              <%= form.text_field :anynumber, type: 'number', 'required' => 'true', 'value' => "#{local_assigns[:anynumber] || 0}",  'aria-describedby' => 'anynumber' %>
              <%= form.submit 'Submit this number', 'id' => 'submit-number' %>
          <% end %>
      </div>
      <div>
        <h2>Data of the view</h2>
        <pre style="font-size: .7rem;"><%= JSON.pretty_generate(local_assigns) %></pre> 
      </div>
      
    <% end %>

</section>

Make some adjustments in routes.rb

#CODE

Rails.application.routes.draw do
  get 'home/index'
  get 'other/index'

  get '/home/turbo_frame_form' => 'home#turbo_frame_form', as: 'turbo_frame_form'
  post '/home/turbo_frame_submit' => 'home#turbo_frame_submit', as: 'turbo_frame_submit'


  root to: "home#index"
end

• Next step is to change homepage view in app/views/home/index.html.erb

#CODE

<h1>This is Rails Hotwire home page</h1>
<div><%= link_to "Enter to other page", other_index_path %></div>

<%= turbo_frame_tag 'anyframe' do %>        
  <div>
      <h2>Home view</h2>
      <%= form_with scope: :any, url: turbo_frame_submit_path, local: true do |form| %>
          <%= form.label :anynumber, 'Type an integer (odd or even)', 'class' => 'my-0  d-inline'  %>
          <%= form.text_field :anynumber, type: 'number', 'required' => 'true', 'value' => "#{local_assigns[:anynumber] || 0}",  'aria-describedby' => 'anynumber' %>
          <%= form.submit 'Submit this number', 'id' => 'submit-number' %>
      <% end %>
  <div>
<% end %>

After making all the changes, restart the rails server and refresh the browser, the default view will appear on the browser.

Now in the field enter any digit, after entering the digit click on submit button, and as the submit button is clicked we can see the Turbo Frame in action in the below screen, we can observe that the frame part changed, the first title and first link didn’t move.

Hotwire Rails: Turbo Streams

Turbo Streams deliver page updates over WebSocket, SSE or in response to form submissions by only using HTML and a series of CRUD-like operations, you are free to say that either

• Update the piece of HTML while responding to all the other actions like the post, put, patch, and delete except the GET action.
• Transmit a change to all users, without reloading the browser page.

This transmit can be represented by a simple example.

• Make changes in app/controllers/other_controller.rb file of rails application

#CODE

class OtherController < ApplicationController

  def post_something
    respond_to do |format|
      format.turbo_stream {  }
    end
  end

   end

Add the below line in routes.rb file of the application

#CODE

post '/other/post_something' => 'other#post_something', as: 'post_something'

Superb! Rails will now attempt to locate the app/views/other/post_something.turbo_stream.erb template at any moment the ‘/other/post_something’ endpoint is reached.

For this, we need to add app/views/other/post_something.turbo_stream.erb template in the rails application.

#CODE

<turbo-stream action="append" target="messages">
  <template>
    <div id="message_1">This changes the existing message!</div>
  </template>
</turbo-stream>

This states that the response will try to append the template of the turbo frame with ID “messages”.

Now change the index.html.erb file in app/views/other paths with the below content.

#CODE

<h1>This is Another page</h1>
<div><%= link_to "Enter to home page", root_path %></div>

<div style="margin-top: 3rem;">
  <%= form_with scope: :any, url: post_something_path do |form| %>
      <%= form.submit 'Post any message %>
  <% end %>
  <turbo-frame id="messages">
    <div>An empty message</div>
  </turbo-frame>
</div>

• After making all the changes, restart the rails server and refresh the browser, and go to the other page.

• Once the above screen appears, click on the Post any message button

This action shows that after submitting the response, the Turbo Streams help the developer to append the message, without reloading the page.

Another use case we can test is that rather than appending the message, the developer replaces the message. For that, we need to change the content of app/views/other/post_something.turbo_stream.erb template file and change the value of the action attribute from append to replace and check the changes in the browser.

#CODE

<turbo-stream action="replace" target="messages">
  <template>
    <div id="message_1">This changes the existing message!</div>
  </template>
</turbo-stream>

When we click on Post any message button, the message that appear below that button will get replaced with the message that is mentioned in the app/views/other/post_something.turbo_stream.erb template

Stimulus

There are some cases in an application where JS is needed, therefore to cover those scenarios we require Hotwire JS tool. Hotwire has a JS tool because in some scenarios Turbo-* tools are not sufficient. But as we know that Hotwire is used to reduce the usage of JS in an application, Stimulus considers HTML as the single source of truth. Consider the case where we have to give elements on a page some JavaScript attributes, such as data controller, data-action, and data target. For that, a stimulus controller that can access elements and receive events based on those characteristics will be created.

Make a change in app/views/other/index.html.erb template file in rails application

#CODE

<h1>This is Another page</h1>
<div><%= link_to "Enter to home page", root_path %></div>

<div style="margin-top: 2rem;">
  <%= form_with scope: :any, url: post_something_path do |form| %>
      <%= form.submit 'Post something' %>
  <% end %>
  <turbo-frame id="messages">
    <div>An empty message</div>
  </turbo-frame>
</div>

<div style="margin-top: 2rem;">
  <h2>Stimulus</h2>  
  <div data-controller="hello">
    <input data-hello-target="name" type="text">
    <button data-action="click->hello#greet">
      Greet
    </button>
    <span data-hello-target="output">
    </span>
  </div>
</div>

Make changes in the hello_controller.js in path app/JavaScript/controllers and add a stimulus controller in the file, which helps to bring the HTML into life.

#CODE

import { Controller } from "@hotwired/stimulus"

export default class extends Controller {
  static targets = [ "name", "output" ]

  greet() {
    this.outputTarget.textContent =
      `Hello, ${this.nameTarget.value}!`
  }
}

Go to your browser after making the changes in the code and click on Enter to other page link which will navigate to the localhost:3000/other/index page there you can see the changes implemented by the stimulus controller that is designed to augment your HTML with just enough behavior to make it more responsive.

With just a little bit of work, Turbo and Stimulus together offer a complete answer for applications that are quick and compelling.

Using Rails 7 Hotwire helps to load the pages at a faster speed and allows you to render templates on the server, where you have access to your whole domain model. It is a productive development experience in ROR, without compromising any of the speed or responsiveness associated with SPA.

Conclusion

We hope you were satisfied with our Rails Hotwire tutorial. Write to us at service@bacancy.com for any query that you want to resolve, or if you want us to share a tutorial on your query.

For more such solutions on RoR, check out our Ruby on Rails Tutorials. We will always strive to amaze you and cater to your needs.

Original article source at: https://www.bacancytechnology.com/

#rails #ruby 

Static Code Analysis: What It Is? How to Use It?

Static code analysis refers to the technique of approximating the runtime behavior of a program. In other words, it is the process of predicting the output of a program without actually executing it.

Lately, however, the term “Static Code Analysis” is more commonly used to refer to one of the applications of this technique rather than the technique itself — program comprehension — understanding the program and detecting issues in it (anything from syntax errors to type mismatches, performance hogs likely bugs, security loopholes, etc.). This is the usage we’d be referring to throughout this post.

“The refinement of techniques for the prompt discovery of error serves as well as any other as a hallmark of what we mean by science.”

• J. Robert Oppenheimer

Outline

We cover a lot of ground in this post. The aim is to build an understanding of static code analysis and to equip you with the basic theory, and the right tools so that you can write analyzers on your own.

We start our journey with laying down the essential parts of the pipeline which a compiler follows to understand what a piece of code does. We learn where to tap points in this pipeline to plug in our analyzers and extract meaningful information. In the latter half, we get our feet wet, and write four such static analyzers, completely from scratch, in Python.

Note that although the ideas here are discussed in light of Python, static code analyzers across all programming languages are carved out along similar lines. We chose Python because of the availability of an easy to use ast module, and wide adoption of the language itself.

How does it all work?

Before a computer can finally “understand” and execute a piece of code, it goes through a series of complicated transformations:

As you can see in the diagram (go ahead, zoom it!), the static analyzers feed on the output of these stages. To be able to better understand the static analysis techniques, let’s look at each of these steps in some more detail:

Scanning

The first thing that a compiler does when trying to understand a piece of code is to break it down into smaller chunks, also known as tokens. Tokens are akin to what words are in a language.

A token might consist of either a single character, like (, or literals (like integers, strings, e.g., 7, Bob, etc.), or reserved keywords of that language (e.g, def in Python). Characters which do not contribute towards the semantics of a program, like trailing whitespace, comments, etc. are often discarded by the scanner.

Python provides the tokenize module in its standard library to let you play around with tokens:

Python

1

import io

2

import tokenize

3

4

code = b"color = input('Enter your favourite color: ')"

5

6

for token in tokenize.tokenize(io.BytesIO(code).readline):

7

    print(token)

Python

1

TokenInfo(type=62 (ENCODING),  string='utf-8')

2

TokenInfo(type=1  (NAME),      string='color')

3

TokenInfo(type=54 (OP),        string='=')

4

TokenInfo(type=1  (NAME),      string='input')

5

TokenInfo(type=54 (OP),        string='(')

6

TokenInfo(type=3  (STRING),    string="'Enter your favourite color: '")

7

TokenInfo(type=54 (OP),        string=')')

8

TokenInfo(type=4  (NEWLINE),   string='')

9

TokenInfo(type=0  (ENDMARKER), string='')

(Note that for the sake of readability, I’ve omitted a few columns from the result above — metadata like starting index, ending index, a copy of the line on which a token occurs, etc.)

#code quality #code review #static analysis #static code analysis #code analysis #static analysis tools #code review tips #static code analyzer #static code analysis tool #static analyzer

Embold Is Like Autocorrect For Code, Says Vishal Rai, Founder & CEO

In our digital world, software is king. In a world so heavily dependent on software, poor code quality can result in grave consequence, from billions of dollars in lost revenue, to even fatal accidents. Here’s where Embold comes in—a static code analysis product aimed at empowering developers to do their best work.

Embold is a general-purpose static code analyser that has been designed for developers to analyse and improve their code by identifying issues across four dimensions, including design and duplication. We, at Analytics India Magazine, spoke to founder and CEO, Vishal Rai, to understand how Embold can detect anti-patterns in code for seamless integration.

Embold started a decade ago, with the vision of creating a product that can revolutionise the way developers write and design code. According to Vishal Rai, the idea was to develop a tool for software engineers and developers to write code faster and of better quality. And, after a time of extensive research and development, Vishal Rai, along with his partner Sudarshan Bhide launched their product in 2018.

---

Play

“We have noticed an interesting trend — as teams started becoming bigger, the issues in software started increasing as well and it was very frustrating when you were on programs which weren’t achieving their stated goals because of poor quality,” said Rai. “And that’s where we saw the opportunity of helping companies to write the product as great as Google or Apple and decided to reinvent software analytics.”

Embold — Empowering Developers to Reach Their Highest Potential

Developers always undergo immense pressure of building their products faster at the best quality possible, and such pressure can lead to compromised code quality. This impact of one line of code or one weak link can create significant issues and can massively affect the entire company. And that is why Rai believes that developers need support in being more productive. With Embold, Vishal and Sudharshan brought in a technology that can help developers be more efficient in their work and make the process of software development easy. Explaining the technology, Rai compared it with “autocorrect for code.” He said, “If you look at the legacy tools, they were built for the waterfall model, aka linear-sequential life cycle model, where one release took six months which gave enough time to test the tools. But in the current time, everything is fast, and thus developers require tools that can help them work fast and give them feedback that can be easily implemented in their workflow.” And that’s where Embold’s platform fits into the workflow that helps them find problems and maintain their code.  As a matter of fact, Rai acknowledges that there have been many great tools, already in the market, but all of them have been created for great engineers. However, today, not every engineer is necessarily as experienced as others, and in such cases, it is imperative to make tools that are easy to use and help developers analyse their software. “Embold has been built for the future, the technologies that we have ingrained have neural networks, state-of-the-art in-memory databases and analysers that are far more evolved than legacy tools,” said Rai. “Embold has been created to enable people who aren’t as skilled to write better codes. Not only it fills the skills gap but also brings the new age developers closer to the best developers on the planet.”

---

#featured #bugs and errors in code #embold a autocorrect for code #embold find bugs and errors in code #embold for developers #embold help developers #embold maintains code quality #embold revolutionise writing code #static code analyser

Cory House’s Analogy Between Writing Code and Writing Prose

I’m working through Cory House’s Pluralsight course, Clean Coding Principles in C#, and something interesting has caught my attention.

House makes a strong case between writing code and writing prose. As a writer myself, I’ve long seen the parallels between writing and coding. However, House takes the analogy further, and draws many parallels between writing clean code and the writing you’d find in a book or article.

The analogy is a good one because it’s concrete and relatable: all of us read books and all of us write code.

We know a book is well written when reading it is easy. That’s because:

• Chapters are organized.
• Headers give us specific information about the paragraphs that follow.
• Each paragraph contains one idea.
• Each character is developed.

We can apply the same principles found in writing prose as in writing code. House shows us how.

1. Write variable names that clearly convey your intent, like names in a book.

“Imagine reading a book with random, one-letter abbreviations throughout,” House suggests. Here’s an example: “P was very angry with G for insulting her M…He slept on the C.”

Despite the bad names, House acknowledges, you can probably get the main idea of what’s going on. But you have to work at it.

That’s an important point: the reader shouldn’t have to work at it. It’d be much clearer and easier to read something like this: “Pam was very angry with George for insulting her mom…He slept on the couch.” The non-letter abbreviations have been replaced with clear, meaningful names.

The same principle is true when writing code. It’s clearer and easier to read a variable like employee_total instead of seeing a seemingly random letter, e. “Understanding the programmer’s intent is the biggest problem,” House says. “So we must strive to be crystal clear about what we meant to do.”

Key point: Be intentional with your names.

2. “Functions are like paragraphs, for code.”

In school, most of us probably learned a golden rule of writing paragraphs: one idea per paragraph. A similar rule applies when writing functions: each function has a single purpose.

Key point: It’s easier to read and understand — both paragraphs and functions — that are clear, focused, and don’t do too much.

3. “Initialize variables just in time,” like characters in a book.

You don’t get a list of characters up front when reading a book, House points out. Instead, you’re introduced to a new character “just in time.”

For example, we get introduced to Bob when he enters the story. Otherwise we have to keep track of Bob, Alice, and a slew of other characters unnecessarily. As a reader, that’s burdensome. It makes reading confusing. It’s why authors don’t do this.

The same is true when coding.

If you initialize all of your variables at the top of your file, then the reader has a bunch of things to remember. That’s burdensome. It makes reading confusing. Don’t do this.

“Instead, well-structured functions should….initialize variables just in time,” House says. “When the variable is needed, bring it to life.” Then, get the variable “out of scope.” That way, the reader no longer has to think about it.

Key point: Give your readers what they need — when they need it.

It’s been said that easy reading is hard writing. That’s true for writing both prose and code. Make it easy for your readers: write clear, meaningful code.

#programming #writing #learning #learning-to-code #code #visual studio code

Generis: Versatile Go Code Generator

Generis

Versatile Go code generator.

Description

Generis is a lightweight code preprocessor adding the following features to the Go language :

• Generics.
• Free-form macros.
• Conditional compilation.
• HTML templating.
• Allman style conversion.

Sample

package main;

// -- IMPORTS

import (
    "html"
    "io"
    "log"
    "net/http"
    "net/url"
    "strconv"
    );

// -- DEFINITIONS

#define DebugMode
#as true

// ~~

#define HttpPort
#as 8080

// ~~

#define WriteLine( {{text}} )
#as log.Println( {{text}} )

// ~~

#define local {{variable}} : {{type}};
#as var {{variable}} {{type}};

// ~~

#define DeclareStack( {{type}}, {{name}} )
#as
    // -- TYPES

    type {{name}}Stack struct
    {
        ElementArray []{{type}};
    }

    // -- INQUIRIES

    func ( stack * {{name}}Stack ) IsEmpty(
        ) bool
    {
        return len( stack.ElementArray ) == 0;
    }

    // -- OPERATIONS

    func ( stack * {{name}}Stack ) Push(
        element {{type}}
        )
    {
        stack.ElementArray = append( stack.ElementArray, element );
    }

    // ~~

    func ( stack * {{name}}Stack ) Pop(
        ) {{type}}
    {
        local
            element : {{type}};

        element = stack.ElementArray[ len( stack.ElementArray ) - 1 ];

        stack.ElementArray = stack.ElementArray[ : len( stack.ElementArray ) - 1 ];

        return element;
    }
#end

// ~~

#define DeclareStack( {{type}} )
#as DeclareStack( {{type}}, {{type:PascalCase}} )

// -- TYPES

DeclareStack( string )
DeclareStack( int32 )

// -- FUNCTIONS

func HandleRootPage(
    response_writer http.ResponseWriter,
    request * http.Request
    )
{
    local
        boolean : bool;
    local
        natural : uint;
    local
        integer : int;
    local
        real : float64;
    local
        escaped_html_text,
        escaped_url_text,
        text : string;
    local
        integer_stack : Int32Stack;

    boolean = true;
    natural = 10;
    integer = 20;
    real = 30.0;
    text = "text";
    escaped_url_text = "&escaped text?";
    escaped_html_text = "<escaped text/>";

    integer_stack.Push( 10 );
    integer_stack.Push( 20 );
    integer_stack.Push( 30 );

    #write response_writer
        <!DOCTYPE html>
        <html lang="en">
            <head>
                <meta charset="utf-8">
                <title><%= request.URL.Path %></title>
            </head>
            <body>
                <% if ( boolean ) { %>
                    <%= "URL : " + request.URL.Path %>
                    <br/>
                    <%@ natural %>
                    <%# integer %>
                    <%& real %>
                    <br/>
                    <%~ text %>
                    <%^ escaped_url_text %>
                    <%= escaped_html_text %>
                    <%= "<%% ignored %%>" %>
                    <%% ignored %%>
                <% } %>
                <br/>
                Stack :
                <br/>
                <% for !integer_stack.IsEmpty() { %>
                    <%# integer_stack.Pop() %>
                <% } %>
            </body>
        </html>
    #end
}

// ~~

func main()
{
    http.HandleFunc( "/", HandleRootPage );

    #if DebugMode
        WriteLine( "Listening on http://localhost:HttpPort" );
    #end

    log.Fatal(
        http.ListenAndServe( ":HttpPort", nil )
        );
}

Syntax

#define directive

Constants and generic code can be defined with the following syntax :

#define old code
#as new code

#define old code
#as
    new
    code
#end

#define
    old
    code
#as new code

#define
    old
    code
#as
    new
    code
#end

#define parameter

The #define directive can contain one or several parameters :

{{variable name}} : hierarchical code (with properly matching brackets and parentheses)
{{variable name#}} : statement code (hierarchical code without semicolon)
{{variable name$}} : plain code
{{variable name:boolean expression}} : conditional hierarchical code
{{variable name#:boolean expression}} : conditional statement code
{{variable name$:boolean expression}} : conditional plain code

They can have a boolean expression to require they match specific conditions :

HasText text
HasPrefix prefix
HasSuffix suffix
HasIdentifier text
false
true
!expression
expression && expression
expression || expression
( expression )

The #define directive must not start or end with a parameter.

#as parameter

The #as directive can use the value of the #define parameters :

{{variable name}}
{{variable name:filter function}}
{{variable name:filter function:filter function:...}}

Their value can be changed through one or several filter functions :

LowerCase
UpperCase
MinorCase
MajorCase
SnakeCase
PascalCase
CamelCase
RemoveComments
RemoveBlanks
PackStrings
PackIdentifiers
ReplacePrefix old_prefix new_prefix
ReplaceSuffix old_suffix new_suffix
ReplaceText old_text new_text
ReplaceIdentifier old_identifier new_identifier
AddPrefix prefix
AddSuffix suffix
RemovePrefix prefix
RemoveSuffix suffix
RemoveText text
RemoveIdentifier identifier

#if directive

Conditional code can be defined with the following syntax :

#if boolean expression
    #if boolean expression
        ...
    #else
        ...
    #end
#else
    #if boolean expression
        ...
    #else
        ...
    #end
#end

The boolean expression can use the following operators :

false
true
!expression
expression && expression
expression || expression
( expression )

#write directive

Templated HTML code can be sent to a stream writer using the following syntax :

#write writer expression
    <% code %>
    <%@ natural expression %>
    <%# integer expression %>
    <%& real expression %>
    <%~ text expression %>
    <%= escaped text expression %>
    <%! removed content %>
    <%% ignored tags %%>
#end

Limitations

• There is no operator precedence in boolean expressions.
• The --join option requires to end the statements with a semicolon.
• The #writer directive is only available for the Go language.

Installation

Install the DMD 2 compiler (using the MinGW setup option on Windows).

Build the executable with the following command line :

dmd -m64 generis.d

Command line

generis [options]

Options

--prefix # : set the command prefix
--parse INPUT_FOLDER/ : parse the definitions of the Generis files in the input folder
--process INPUT_FOLDER/ OUTPUT_FOLDER/ : reads the Generis files in the input folder and writes the processed files in the output folder
--trim : trim the HTML templates
--join : join the split statements
--create : create the output folders if needed
--watch : watch the Generis files for modifications
--pause 500 : time to wait before checking the Generis files again
--tabulation 4 : set the tabulation space count
--extension .go : generate files with this extension

Examples

generis --process GS/ GO/

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder.

generis --process GS/ GO/ --create

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, creating the output folders if needed.

generis --process GS/ GO/ --create --watch

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, creating the output folders if needed and watching the Generis files for modifications.

generis --process GS/ GO/ --trim --join --create --watch

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, trimming the HTML templates, joining the split statements, creating the output folders if needed and watching the Generis files for modifications.

Version

2.0

Author: Senselogic
Source Code: https://github.com/senselogic/GENERIS 
License: View license

#go #golang #code