Brad  Hintz

Brad Hintz

1598826840

How to traverse through array values in a spiral matrix

Imagine you are walking through a dungeon and you want to find the destination point in the middle.

That’s right…printing values in a spiral matrix feels like that.

As you can see, the numbers spirals 1 to 25 from the outer layers, left to right, top to bottom, right to left, and bottom to up as it dives across other inner layers in a similar passion.

The question is, how do we traverse the whole array in a spiral manner and print them in the right format?

Here is my suggested solution:

  • Step 1: have a row begin and row-end count, column begin, and column end count. These counts will be used to track boundaries and conditions to end looping through the matrix.
  • Step 2: add items going from top row, left to right. Afterward, increment row begin count.
  • Step 3: add items on the rightmost column, from top to bottom. Afterward, decrement column end count.
  • Step 4: Check if row begin is less than or equal to row end count. This is to prevent adding/printing existing elements that have already been traversed. If the condition matches, then we traverse on the current column end count(on the first iteration, this will be iterating on the last row, going from right column to the leftmost column) until it hits columnBegin count.
  • Step 5:check if the column begins is less than or equal to columned count. This is to prevent adding/printing existing elements that have already been traversed. If the condition matches, then we traverse on the current row end count(on the first iteration, this will be iterating on left-most column, going from bottom to up on the same column) until it hits rowBegin count.

#front-end-development #web-development #algorithms #javascript #arrays

What is GEEK

Buddha Community

How to traverse through array values in a spiral matrix
Python  Library

Python Library

1657400640

Synapse: Matrix Homeserver Written in Python 3/Twisted

Introduction

Matrix is an ambitious new ecosystem for open federated Instant Messaging and VoIP. The basics you need to know to get up and running are:

  • Everything in Matrix happens in a room. Rooms are distributed and do not exist on any single server. Rooms can be located using convenience aliases like #matrix:matrix.org or #test:localhost:8448.
  • Matrix user IDs look like @matthew:matrix.org (although in the future you will normally refer to yourself and others using a third party identifier (3PID): email address, phone number, etc rather than manipulating Matrix user IDs)

The overall architecture is:

client <----> homeserver <=====================> homeserver <----> client
       https://somewhere.org/_matrix      https://elsewhere.net/_matrix

#matrix:matrix.org is the official support room for Matrix, and can be accessed by any client from https://matrix.org/docs/projects/try-matrix-now.html or via IRC bridge at irc://irc.libera.chat/matrix.

Synapse is currently in rapid development, but as of version 0.5 we believe it is sufficiently stable to be run as an internet-facing service for real usage!

About Matrix

Matrix specifies a set of pragmatic RESTful HTTP JSON APIs as an open standard, which handle:

  • Creating and managing fully distributed chat rooms with no single points of control or failure
  • Eventually-consistent cryptographically secure synchronisation of room state across a global open network of federated servers and services
  • Sending and receiving extensible messages in a room with (optional) end-to-end encryption
  • Inviting, joining, leaving, kicking, banning room members
  • Managing user accounts (registration, login, logout)
  • Using 3rd Party IDs (3PIDs) such as email addresses, phone numbers, Facebook accounts to authenticate, identify and discover users on Matrix.
  • Placing 1:1 VoIP and Video calls

These APIs are intended to be implemented on a wide range of servers, services and clients, letting developers build messaging and VoIP functionality on top of the entirely open Matrix ecosystem rather than using closed or proprietary solutions. The hope is for Matrix to act as the building blocks for a new generation of fully open and interoperable messaging and VoIP apps for the internet.

Synapse is a Matrix "homeserver" implementation developed by the matrix.org core team, written in Python 3/Twisted.

In Matrix, every user runs one or more Matrix clients, which connect through to a Matrix homeserver. The homeserver stores all their personal chat history and user account information - much as a mail client connects through to an IMAP/SMTP server. Just like email, you can either run your own Matrix homeserver and control and own your own communications and history or use one hosted by someone else (e.g. matrix.org) - there is no single point of control or mandatory service provider in Matrix, unlike WhatsApp, Facebook, Hangouts, etc.

We'd like to invite you to join #matrix:matrix.org (via https://matrix.org/docs/projects/try-matrix-now.html), run a homeserver, take a look at the Matrix spec, and experiment with the APIs and Client SDKs.

Thanks for using Matrix!

Support

For support installing or managing Synapse, please join #synapse:matrix.org (from a matrix.org account if necessary) and ask questions there. We do not use GitHub issues for support requests, only for bug reports and feature requests.

Synapse's documentation is nicely rendered on GitHub Pages, with its source available in docs.

Synapse Installation

Connecting to Synapse from a client

The easiest way to try out your new Synapse installation is by connecting to it from a web client.

Unless you are running a test instance of Synapse on your local machine, in general, you will need to enable TLS support before you can successfully connect from a client: see TLS certificates.

An easy way to get started is to login or register via Element at https://app.element.io/#/login or https://app.element.io/#/register respectively. You will need to change the server you are logging into from matrix.org and instead specify a Homeserver URL of https://<server_name>:8448 (or just https://<server_name> if you are using a reverse proxy). If you prefer to use another client, refer to our client breakdown.

If all goes well you should at least be able to log in, create a room, and start sending messages.

Registering a new user from a client

By default, registration of new users via Matrix clients is disabled. To enable it, specify enable_registration: true in homeserver.yaml. (It is then recommended to also set up CAPTCHA - see docs/CAPTCHA_SETUP.md.)

Once enable_registration is set to true, it is possible to register a user via a Matrix client.

Your new user name will be formed partly from the server_name, and partly from a localpart you specify when you create the account. Your name will take the form of:

@localpart:my.domain.name

(pronounced "at localpart on my dot domain dot name").

As when logging in, you will need to specify a "Custom server". Specify your desired localpart in the 'User name' box.

Security note

Matrix serves raw, user-supplied data in some APIs -- specifically the content repository endpoints.

Whilst we make a reasonable effort to mitigate against XSS attacks (for instance, by using CSP), a Matrix homeserver should not be hosted on a domain hosting other web applications. This especially applies to sharing the domain with Matrix web clients and other sensitive applications like webmail. See https://developer.github.com/changes/2014-04-25-user-content-security for more information.

Ideally, the homeserver should not simply be on a different subdomain, but on a completely different registered domain (also known as top-level site or eTLD+1). This is because some attacks are still possible as long as the two applications share the same registered domain.

To illustrate this with an example, if your Element Web or other sensitive web application is hosted on A.example1.com, you should ideally host Synapse on example2.com. Some amount of protection is offered by hosting on B.example1.com instead, so this is also acceptable in some scenarios. However, you should not host your Synapse on A.example1.com.

Note that all of the above refers exclusively to the domain used in Synapse's public_baseurl setting. In particular, it has no bearing on the domain mentioned in MXIDs hosted on that server.

Following this advice ensures that even if an XSS is found in Synapse, the impact to other applications will be minimal.

Upgrading an existing Synapse

The instructions for upgrading synapse are in the upgrade notes. Please check these instructions as upgrading may require extra steps for some versions of synapse.

Using a reverse proxy with Synapse

It is recommended to put a reverse proxy such as nginx, Apache, Caddy, HAProxy or relayd in front of Synapse. One advantage of doing so is that it means that you can expose the default https port (443) to Matrix clients without needing to run Synapse with root privileges.

For information on configuring one, see docs/reverse_proxy.md.

Identity Servers

Identity servers have the job of mapping email addresses and other 3rd Party IDs (3PIDs) to Matrix user IDs, as well as verifying the ownership of 3PIDs before creating that mapping.

They are not where accounts or credentials are stored - these live on home servers. Identity Servers are just for mapping 3rd party IDs to matrix IDs.

This process is very security-sensitive, as there is obvious risk of spam if it is too easy to sign up for Matrix accounts or harvest 3PID data. In the longer term, we hope to create a decentralised system to manage it (matrix-doc #712), but in the meantime, the role of managing trusted identity in the Matrix ecosystem is farmed out to a cluster of known trusted ecosystem partners, who run 'Matrix Identity Servers' such as Sydent, whose role is purely to authenticate and track 3PID logins and publish end-user public keys.

You can host your own copy of Sydent, but this will prevent you reaching other users in the Matrix ecosystem via their email address, and prevent them finding you. We therefore recommend that you use one of the centralised identity servers at https://matrix.org or https://vector.im for now.

To reiterate: the Identity server will only be used if you choose to associate an email address with your account, or send an invite to another user via their email address.

Password reset

Users can reset their password through their client. Alternatively, a server admin can reset a users password using the admin API or by directly editing the database as shown below.

First calculate the hash of the new password:

$ ~/synapse/env/bin/hash_password
Password:
Confirm password:
$2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Then update the users table in the database:

UPDATE users SET password_hash='$2a$12$xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
    WHERE name='@test:test.com';

Synapse Development

The best place to get started is our guide for contributors. This is part of our larger documentation, which includes information for synapse developers as well as synapse administrators.

Developers might be particularly interested in:

Alongside all that, join our developer community on Matrix: #synapse-dev:matrix.org, featuring real humans!

Quick start

Before setting up a development environment for synapse, make sure you have the system dependencies (such as the python header files) installed - see Platform-specific prerequisites.

To check out a synapse for development, clone the git repo into a working directory of your choice:

git clone https://github.com/matrix-org/synapse.git
cd synapse

Synapse has a number of external dependencies. We maintain a fixed development environment using Poetry. First, install poetry. We recommend:

pip install --user pipx
pipx install poetry

as described here. (See poetry's installation docs for other installation methods.) Then ask poetry to create a virtual environment from the project and install Synapse's dependencies:

poetry install --extras "all test"

This will run a process of downloading and installing all the needed dependencies into a virtual env.

We recommend using the demo which starts 3 federated instances running on ports 8080 - 8082:

poetry run ./demo/start.sh

(to stop, you can use poetry run ./demo/stop.sh)

See the demo documentation for more information.

If you just want to start a single instance of the app and run it directly:

# Create the homeserver.yaml config once
poetry run synapse_homeserver \
  --server-name my.domain.name \
  --config-path homeserver.yaml \
  --generate-config \
  --report-stats=[yes|no]

# Start the app
poetry run synapse_homeserver --config-path homeserver.yaml

Running the unit tests

After getting up and running, you may wish to run Synapse's unit tests to check that everything is installed correctly:

poetry run trial tests

This should end with a 'PASSED' result (note that exact numbers will differ):

Ran 1337 tests in 716.064s

PASSED (skips=15, successes=1322)

For more tips on running the unit tests, like running a specific test or to see the logging output, see the CONTRIBUTING doc.

Running the Integration Tests

Synapse is accompanied by SyTest, a Matrix homeserver integration testing suite, which uses HTTP requests to access the API as a Matrix client would. It is able to run Synapse directly from the source tree, so installation of the server is not required.

Testing with SyTest is recommended for verifying that changes related to the Client-Server API are functioning correctly. See the SyTest installation instructions for details.

Platform dependencies

Synapse uses a number of platform dependencies such as Python and PostgreSQL, and aims to follow supported upstream versions. See the docs/deprecation_policy.md document for more details.

Troubleshooting

Need help? Join our community support room on Matrix: #synapse:matrix.org

Running out of File Handles

If synapse runs out of file handles, it typically fails badly - live-locking at 100% CPU, and/or failing to accept new TCP connections (blocking the connecting client). Matrix currently can legitimately use a lot of file handles, thanks to busy rooms like #matrix:matrix.org containing hundreds of participating servers. The first time a server talks in a room it will try to connect simultaneously to all participating servers, which could exhaust the available file descriptors between DNS queries & HTTPS sockets, especially if DNS is slow to respond. (We need to improve the routing algorithm used to be better than full mesh, but as of March 2019 this hasn't happened yet).

If you hit this failure mode, we recommend increasing the maximum number of open file handles to be at least 4096 (assuming a default of 1024 or 256). This is typically done by editing /etc/security/limits.conf

Separately, Synapse may leak file handles if inbound HTTP requests get stuck during processing - e.g. blocked behind a lock or talking to a remote server etc. This is best diagnosed by matching up the 'Received request' and 'Processed request' log lines and looking for any 'Processed request' lines which take more than a few seconds to execute. Please let us know at #synapse:matrix.org if you see this failure mode so we can help debug it, however.

Help!! Synapse is slow and eats all my RAM/CPU!

First, ensure you are running the latest version of Synapse, using Python 3 with a PostgreSQL database.

Synapse's architecture is quite RAM hungry currently - we deliberately cache a lot of recent room data and metadata in RAM in order to speed up common requests. We'll improve this in the future, but for now the easiest way to either reduce the RAM usage (at the risk of slowing things down) is to set the almost-undocumented SYNAPSE_CACHE_FACTOR environment variable. The default is 0.5, which can be decreased to reduce RAM usage in memory constrained enviroments, or increased if performance starts to degrade.

However, degraded performance due to a low cache factor, common on machines with slow disks, often leads to explosions in memory use due backlogged requests. In this case, reducing the cache factor will make things worse. Instead, try increasing it drastically. 2.0 is a good starting value.

Using libjemalloc can also yield a significant improvement in overall memory use, and especially in terms of giving back RAM to the OS. To use it, the library must simply be put in the LD_PRELOAD environment variable when launching Synapse. On Debian, this can be done by installing the libjemalloc1 package and adding this line to /etc/default/matrix-synapse:

LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libjemalloc.so.1

This can make a significant difference on Python 2.7 - it's unclear how much of an improvement it provides on Python 3.x.

If you're encountering high CPU use by the Synapse process itself, you may be affected by a bug with presence tracking that leads to a massive excess of outgoing federation requests (see discussion). If metrics indicate that your server is also issuing far more outgoing federation requests than can be accounted for by your users' activity, this is a likely cause. The misbehavior can be worked around by setting the following in the Synapse config file:

presence:
    enabled: false

People can't accept room invitations from me

The typical failure mode here is that you send an invitation to someone to join a room or direct chat, but when they go to accept it, they get an error (typically along the lines of "Invalid signature"). They might see something like the following in their logs:

2019-09-11 19:32:04,271 - synapse.federation.transport.server - 288 - WARNING - GET-11752 - authenticate_request failed: 401: Invalid signature for server <server> with key ed25519:a_EqML: Unable to verify signature for <server>

This is normally caused by a misconfiguration in your reverse-proxy. See docs/reverse_proxy.md and double-check that your settings are correct.

Download Details:
Author: matrix-org
Source Code: https://github.com/matrix-org/synapse
License: Apache-2.0 license

#python

Brad  Hintz

Brad Hintz

1598826840

How to traverse through array values in a spiral matrix

Imagine you are walking through a dungeon and you want to find the destination point in the middle.

That’s right…printing values in a spiral matrix feels like that.

As you can see, the numbers spirals 1 to 25 from the outer layers, left to right, top to bottom, right to left, and bottom to up as it dives across other inner layers in a similar passion.

The question is, how do we traverse the whole array in a spiral manner and print them in the right format?

Here is my suggested solution:

  • Step 1: have a row begin and row-end count, column begin, and column end count. These counts will be used to track boundaries and conditions to end looping through the matrix.
  • Step 2: add items going from top row, left to right. Afterward, increment row begin count.
  • Step 3: add items on the rightmost column, from top to bottom. Afterward, decrement column end count.
  • Step 4: Check if row begin is less than or equal to row end count. This is to prevent adding/printing existing elements that have already been traversed. If the condition matches, then we traverse on the current column end count(on the first iteration, this will be iterating on the last row, going from right column to the leftmost column) until it hits columnBegin count.
  • Step 5:check if the column begins is less than or equal to columned count. This is to prevent adding/printing existing elements that have already been traversed. If the condition matches, then we traverse on the current row end count(on the first iteration, this will be iterating on left-most column, going from bottom to up on the same column) until it hits rowBegin count.

#front-end-development #web-development #algorithms #javascript #arrays

Joseph  Murray

Joseph Murray

1623911281

How to Print an Array in Java

Introduction

Printing an array is a quick way to give us visibility on the values of the contents inside. Sometimes the array values are the desired output of the program.

In this article, we’ll take a look at how to print an array in Java using four different ways.

While the “best way” depends on what your program needs to do, we begin with the simplest method for printing and then show more verbose ways to do it.

#java #array #how to print an array in java #array in java #print an array in java #print

Mix Order Traversal of a Binary Tree

Given a Binary Tree consisting of** N** nodes, the task is to print its Mix Order Traversal.

Mix Order Traversal_ is a tree traversal technique, which involves any two of the existing traversal techniques like Inorder, Preorder and Postorder Traversal. Any two of them can be performed or alternate levels of given tree and a mix traversal can be obtained._

Examples:

_Input: _N = 6

_Output: __7 4 5 1 3 6 _

Explanation:

_Inorder-Preorder Mix Traversal is applied to the given tree in the following order: _

_Inorder Traversal is applied at level 0 _

_Preorder Traversal is applied at level 1 _

Inorder Traversal at level 2.

_Output: __4 5 7 1 6 3 _

#data structures #recursion #tree #inorder traversal #postorder traversal #preorder traversal #tree traversals

Brook  Legros

Brook Legros

1659199883

String Pattern: Generate Strings Supplying A Simple Pattern in Ruby

StringPattern

With this gem, you can easily generate strings supplying a very simple pattern. Even generate random words in English or Spanish. Also, you can validate if a text fulfills a specific pattern or even generate a string following a pattern and returning the wrong length, value... for testing your applications. Perfect to be used in test data factories.

Also you can use regular expressions (Regexp) to generate strings: /[a-z0-9]{2,5}\w+/.gen

To do even more take a look at nice_hash gem

Installation

Add this line to your application's Gemfile:

gem 'string_pattern'

And then execute:

$ bundle

Or install it yourself as:

$ gem install string_pattern

Usage

What is a string pattern?

A pattern is a string where we supply these elements "a-b:c" where a is min_length, b is max_length (optional) and c is a set of symbol_type

min_length: minimum length of the string

max_length (optional): maximum length of the string. If not provided, the result will be with the min_length provided

symbol_type: The type of the string we want.
    x: from a to z (lowercase)
    X: A to Z (capital letters)
    L: A to Z and a to z
    T: National characters defined on StringPattern.national_chars
    n or N: for numbers. 0 to 9
    $: special characters, $%&#...  (includes blank space)
    _: blank space
    *: all characters
    0: empty string will be accepted.  It needs to be at the beginning of the symbol_type string
        @: It will generate a valid email following the official algorithm. It cannot be used with other symbol_type
        W: for English words, capital and lower. It cannot be used with other symbol_type
        w: for English words only lower and words separated by underscore. It cannot be used with other symbol_type
        P: for Spanish words, capital and lower. It cannot be used with other symbol_type
        p: for Spanish words only lower and words separated by underscore. It cannot be used with other symbol_type
    

How to generate a string following a pattern

To generate a string following a pattern you can do it using directly the StringPattern class or the generate method in the class, be aware you can always use also the alias method: gen

require 'string_pattern'

#StringPattern class
p StringPattern.generate "10:N"
#>3448910834
p StringPattern.gen "5:X"
#>JDDDK

#String class
p "4:Nx".gen
#>xaa3

#Symbol class
p :"10:T".generate
#>AccBdjklñD

#Array class
p [:"3:N", "fixed", :"3:N"].gen
#>334fixed920
p "(,3:N,) ,3:N,-,2:N,-,2:N".split(',').generate 
#>(937) 980-65-05

#Kernel
p gen "3:N"
#>443

Generating unique strings

If you want to generate for example 1000 strings and be sure all those strings are different you can use:

StringPattern.dont_repeat = true #default: false
1000.times {
    puts :"6-20:L/N/".gen
}
StringPattern.cache_values = Hash.new() #to clean the generated values from memory

Using dont_repeat all the generated string during the current run will be unique.

In case you just want one particular string to be unique but not the rest then add to the pattern just in the end the symbol: &

The pattern needs to be a symbol object.

1000.times {
    puts :"6-20:L/N/&".gen #will be unique
    puts :"10:N".gen
}

Generate words randomly in English or Spanish

To generate a string of the length you want that will include only real words, use the symbol types:

  • W: generates English words following CamelCase ('ExampleOutput')
  • w: generates English words following snake_case ('example_output')
  • P: generates Spanish words following CamelCase ('EjemploSalida')
  • p: generates Spanish words following snake_case ('ejemplo_salida')
require 'string_pattern'

puts '10-30:W'.gen
#> FirstLieutenant
puts '10-30:w'.gen
#> paris_university
puts '10-30:P'.gen
#> SillaMetalizada
puts '10-30:p'.gen
#> despacho_grande

If you want to use a different word separator than "_" when using 'w' or 'p':

# blank space for example
require 'string_pattern'

StringPattern.word_separator = ' '

puts '10-30:w'.gen
#> paris university
puts '10-30:p'.gen
#> despacho grande

The word list is loaded on the first request to generate words, after that the speed to generate words increases amazingly. 85000 English words and 250000 Spanish words. The vocabularies are a sample of public open sources.

Generate strings using Regular Expressions (Regexp)

Take in consideration this feature is not supporting all possibilities for Regular expressions but it is fully functional. If you find any bug or limitation please add it to issues: https://github.com/MarioRuiz/string_pattern/issues

In case you want to change the default maximum for repetitions when using * or +: StringPattern.default_infinite = 30 . By default is 10.

If you want to translate a regular expression into an StringPattern use the method we added to Regexp class: to_sp

Examples:

/[a-z0-9]{2-5}\w+/.to_sp
#> ["2-5:nx", "1-10:Ln_"]

#regular expression for UUID v4
/[0-9A-F]{8}-[0-9A-F]{4}-4[0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}/.to_sp
#> ["8:n[ABCDEF]", "-", "4:n[ABCDEF]", "-4", "3:n[ABCDEF]", "-", "1:[89AB]", "3:n[ABCDEF]", "-", "12:n[ABCDEF]"]

If you want to generate a random string following the regular expression, you can do it like a normal string pattern:


regexp = /[0-9A-F]{8}-[0-9A-F]{4}-4[0-9A-F]{3}-[89AB][0-9A-F]{3}-[0-9A-F]{12}/

# using StringPattern class
puts StringPattern.generate(regexp)

# using Kernel
puts generate(regexp)

# using generate method added to Regexp class
puts regexp.generate

#using the alias 'gen'
puts regexp.gen 

# output:
#>7009574B-6F2F-436E-BB7A-EA5FDA6B4E47
#>5FB1718F-108A-4F62-8170-33C43FD86B1D
#>05745B6F-93BA-475F-8118-DD56E5EAC4D1
#>2D6FC189-8D50-45A8-B182-780193838502

String patterns

How to generate one or another string

In case you need to specify that the string is generated selecting one or another fixed string or pattern, you can do it by using Array of patterns and in the position you want you can add an array with the possible values

p ["uno:", :"5:N", ['.red','.green', :'3:L'] ].gen

# first position a fixed string: "uno:"
# second position 5 random numbers
# third position one of these values: '.red', '.green' or 3 letters

# example output: 
# 'uno:34322.red'
# 'uno:44432.green'
# 'uno:34322.red'
# 'uno:28795xAB'

Take in consideration that this is only available to generate successful strings but not for validation

Custom characters

Also, it's possible to provide the characters we want. To do that we'll use the symbol_type [characters]

If we want to add the character ] we have to write ]]

Examples

# four chars from the ones provided: asDF9
p "4:[asDF9]".gen    #> aaaa, asFF, 9sFD

# from 2 to 20 chars, capital and lower chars (Xx) and also valid the characters $#6
p "2-20:[$#6]Xx".gen    #> aaaa, asFF, 66, B$DkKL#9aDD
 
# four chars from these: asDF]9
p "4:[asDF]]9]".gen    #> aa]a, asFF, 9s]D

Required characters or symbol types

We'll use the symbol / to specify which characters or symbols we want to be included on the resulting string as required values /symbols or characters/

If we need to add the character / we'll use //

Examples:

# four characters. optional: capitals and numbers, required: lower
"4:XN/x/".gen    # aaaa, FF9b, j4em, asdf, ADFt

# from 6 to 15 chars. optional: numbers, capitals and the chars $ and Æ. required the chars: 23abCD
"6-15:[/23abCD/$Æ]NX".gen    # bCa$D32, 32DJIOKLaCb, b23aD568C
 
# from 4 to 9 chars. optional: numbers and capitals. required: lowers and the characters $ and 5
"4-9:[/$5/]XN/x/".generate    # aa5$, F5$F9b, j$4em5, a5sdf$, $ADFt5 

Excluded characters

If we want to exclude a few characters in the result, we'll use the symbol %characters%

If you need to exclude the character %, you should use %%

Examples:

# from 2 to 20 characters. optional: Numbers and characters A, B and C. excluded: the characters 8 and 3
"2-20:[%83%ABC]N".gen    # B49, 22900, 9CAB, 22, 11CB6270C26C4572A50C

# 10 chars. optional: Letters (capital and lower). required: numbers. excluded: the characters 0 and WXYzZ
"10:L/n/[%0WXYzZ%]".gen    # GoO2ukCt4l, Q1Je2remFL, qPg1T92T2H, 4445556781

Not fulfilling a pattern

If we want our resulting string doesn't fulfill the pattern we supply, then we'll use the symbol ! at the beginning

Examples:

"!4:XN/x/".gen    # a$aaa, FF9B, j4DDDem, as, 2345

"!10:N".gen     # 123, 34899Add34, 3434234234234008, AAFj#kd2x

Generate a string with specific expected errors

Usually, for testing purposes you need to generate strings that don't fulfill a specific pattern, then you can supply as a parameter expected_errors (alias: errors)

The possible values you can specify is one or more of these ones: :length, :min_length, :max_length, :value, :required_data, :excluded_data, :string_set_not_allowed

:length: wrong length, minimum or maximum
:min_length: wrong minimum length
:max_length: wrong maximum length
:value: wrong resultant value
:required_data: the output string won't include all necessary required data. It works only if required data supplied on the pattern.
:excluded_data: the resultant string will include one or more characters that should be excluded. It works only if excluded data supplied on the pattern.
:string_set_not_allowed: it will include one or more characters that are not supposed to be on the string.

Examples:

"10-20:N".gen errors: [:min_length]
#> 627, 098262, 3408

"20:N".gen errors: [:length, :value]
#> |13, tS1b)r-1)<RT65202eTo6bV0g~, 021400323<2ahL0NP86a698063*56076

"10:L/n/".gen errors: [:value]
#> 1hwIw;v{KQ, mpk*l]!7:!, wocipgZt8@

Validate if a string is following a pattern

If you need to validate if a specific text is fulfilling the pattern you can use the validate method.

If a string pattern supplied and no other parameters supplied the output will be an array with the errors detected.

Possible output values, empty array (validation without errors detected) or one or more of: :min_length, :max_length, :length, :value, :string_set_not_allowed, :required_data, :excluded_data

In case an array of patterns supplied it will return only true or false

Examples:

#StringPattern class
StringPattern.validate((text: "This text will be validated", pattern: :"10-20:Xn")
#> [:max_length, :length, :value, :string_set_not_allowed]

#String class
"10:N".validate "333444"
#> [:min_length, :length]

#Symbol class
:"10:N".validate("333444")
#> [:min_length, :length]

#Array class
["5:L","3:xn","4-10:n"].validate "DjkljFFc343444390"
#> false

If we want to validate a string with a pattern and we are expecting to get specific errors, you can supply the parameter expected_errors (alias: errors) or not_expected_errors (aliases: non_expected_errors, not_errors).

In this case, the validate method will return true or false.

Examples:

"10:N".val "3445", errors: [:min_length]
#> true

"10:N/[09]/".validate "4434039440", errors: [:value]
#> false

"10-12:XN/x/".validate "FDDDDDAA343434", errors: [:max_length, :required_data]
#> true

Configure

SP_ADD_TO_RUBY

This gem adds the methods generate (alias: gen) and validate (alias: val) to the Ruby classes: String, Array, and Symbol.

Also adds the method generate (alias: gen) to Kernel. By default (true) it is always added.

In case you don't want to be added, just before requiring the library set:

SP_ADD_TO_RUBY = false
require 'string_pattern'

In case it is set to true (default) then you will be able to use:

require 'string_pattern'

#String object
"20-30:@".gen 
#>dkj34MljjJD-df@jfdluul.dfu

"10:L/N/[/-./%d%]".validate("12ds6f--.s") 
#>[:value, :string_set_not_allowed]

"20-40:@".validate(my_email)

#Kernel
gen "10:N"
#>3433409877

#Array object
"(,3:N,) ,3:N,-,2:N,-,2:N".split(",").generate 
#>(937) 980-65-05

%w{( 3:N ) 1:_ 3:N - 2:N - 2:N}.gen 
#>(045) 448-63-09

["1:L", "5-10:LN", "-", "3:N"].gen 
#>zqWihV-746

national_chars

To specify which national characters will be used when using the symbol type: T, you use StringPattern.national_chars, by default is the English alphabet

StringPattern.national_chars = (('a'..'z').to_a + ('A'..'Z').to_a).join + "áéíóúÁÉÍÓÚüÜñÑ"
"10-20:Tn".gen #>AAñ34Ef99éNOP

optimistic

If true it will check on the strings of the array positions supplied if they have the pattern format and assume in that case that is a pattern. If not it will assume the patterns on the array will be supplied as symbols. By default is set to true.

StringPattern.optimistic = false
["5:X","fixedtext", "3:N"].generate
#>5:Xfixedtext3:N
[:"5:X","fixedtext", :"3:N"].generate
#>AUJKJfixedtext454

StringPattern.optimistic = true
["5:X","fixedtext", "3:N"].generate
#>KKDMEfixedtext344
[:"5:X","fixedtext", :"3:N"].generate
#>SAAERfixedtext988

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/marioruiz/string_pattern.

License

The gem is available as open source under the terms of the MIT License.


Author: MarioRuiz
Source code: https://github.com/MarioRuiz/string_pattern
License: MIT license

#ruby  #ruby-on-rails