Yoav Reisler

1589604132

Creating UI with like SwiftUI’s syntax by the power of Texture framework

In this article, I’m going to talk about “Creating UI with code and how we could write like SwiftUI’s syntax with Texture”
As a premise, the targets people in this article:

  • Trying to create UI without Interface Builder. (It means writing the code to set the layout constraints up.)
  • And feels tired with so many constraints and hard to recognize a layout from the source-code.

#swiftui #ios #swift #uikit #design

What is GEEK

Buddha Community

Creating UI with like SwiftUI’s syntax by the power of Texture framework
Easter  Deckow

Easter Deckow

1655630160

PyTumblr: A Python Tumblr API v2 Client

PyTumblr

Installation

Install via pip:

$ pip install pytumblr

Install from source:

$ git clone https://github.com/tumblr/pytumblr.git
$ cd pytumblr
$ python setup.py install

Usage

Create a client

A pytumblr.TumblrRestClient is the object you'll make all of your calls to the Tumblr API through. Creating one is this easy:

client = pytumblr.TumblrRestClient(
    '<consumer_key>',
    '<consumer_secret>',
    '<oauth_token>',
    '<oauth_secret>',
)

client.info() # Grabs the current user information

Two easy ways to get your credentials to are:

  1. The built-in interactive_console.py tool (if you already have a consumer key & secret)
  2. The Tumblr API console at https://api.tumblr.com/console
  3. Get sample login code at https://api.tumblr.com/console/calls/user/info

Supported Methods

User Methods

client.info() # get information about the authenticating user
client.dashboard() # get the dashboard for the authenticating user
client.likes() # get the likes for the authenticating user
client.following() # get the blogs followed by the authenticating user

client.follow('codingjester.tumblr.com') # follow a blog
client.unfollow('codingjester.tumblr.com') # unfollow a blog

client.like(id, reblogkey) # like a post
client.unlike(id, reblogkey) # unlike a post

Blog Methods

client.blog_info(blogName) # get information about a blog
client.posts(blogName, **params) # get posts for a blog
client.avatar(blogName) # get the avatar for a blog
client.blog_likes(blogName) # get the likes on a blog
client.followers(blogName) # get the followers of a blog
client.blog_following(blogName) # get the publicly exposed blogs that [blogName] follows
client.queue(blogName) # get the queue for a given blog
client.submission(blogName) # get the submissions for a given blog

Post Methods

Creating posts

PyTumblr lets you create all of the various types that Tumblr supports. When using these types there are a few defaults that are able to be used with any post type.

The default supported types are described below.

  • state - a string, the state of the post. Supported types are published, draft, queue, private
  • tags - a list, a list of strings that you want tagged on the post. eg: ["testing", "magic", "1"]
  • tweet - a string, the string of the customized tweet you want. eg: "Man I love my mega awesome post!"
  • date - a string, the customized GMT that you want
  • format - a string, the format that your post is in. Support types are html or markdown
  • slug - a string, the slug for the url of the post you want

We'll show examples throughout of these default examples while showcasing all the specific post types.

Creating a photo post

Creating a photo post supports a bunch of different options plus the described default options * caption - a string, the user supplied caption * link - a string, the "click-through" url for the photo * source - a string, the url for the photo you want to use (use this or the data parameter) * data - a list or string, a list of filepaths or a single file path for multipart file upload

#Creates a photo post using a source URL
client.create_photo(blogName, state="published", tags=["testing", "ok"],
                    source="https://68.media.tumblr.com/b965fbb2e501610a29d80ffb6fb3e1ad/tumblr_n55vdeTse11rn1906o1_500.jpg")

#Creates a photo post using a local filepath
client.create_photo(blogName, state="queue", tags=["testing", "ok"],
                    tweet="Woah this is an incredible sweet post [URL]",
                    data="/Users/johnb/path/to/my/image.jpg")

#Creates a photoset post using several local filepaths
client.create_photo(blogName, state="draft", tags=["jb is cool"], format="markdown",
                    data=["/Users/johnb/path/to/my/image.jpg", "/Users/johnb/Pictures/kittens.jpg"],
                    caption="## Mega sweet kittens")

Creating a text post

Creating a text post supports the same options as default and just a two other parameters * title - a string, the optional title for the post. Supports markdown or html * body - a string, the body of the of the post. Supports markdown or html

#Creating a text post
client.create_text(blogName, state="published", slug="testing-text-posts", title="Testing", body="testing1 2 3 4")

Creating a quote post

Creating a quote post supports the same options as default and two other parameter * quote - a string, the full text of the qote. Supports markdown or html * source - a string, the cited source. HTML supported

#Creating a quote post
client.create_quote(blogName, state="queue", quote="I am the Walrus", source="Ringo")

Creating a link post

  • title - a string, the title of post that you want. Supports HTML entities.
  • url - a string, the url that you want to create a link post for.
  • description - a string, the desciption of the link that you have
#Create a link post
client.create_link(blogName, title="I like to search things, you should too.", url="https://duckduckgo.com",
                   description="Search is pretty cool when a duck does it.")

Creating a chat post

Creating a chat post supports the same options as default and two other parameters * title - a string, the title of the chat post * conversation - a string, the text of the conversation/chat, with diablog labels (no html)

#Create a chat post
chat = """John: Testing can be fun!
Renee: Testing is tedious and so are you.
John: Aw.
"""
client.create_chat(blogName, title="Renee just doesn't understand.", conversation=chat, tags=["renee", "testing"])

Creating an audio post

Creating an audio post allows for all default options and a has 3 other parameters. The only thing to keep in mind while dealing with audio posts is to make sure that you use the external_url parameter or data. You cannot use both at the same time. * caption - a string, the caption for your post * external_url - a string, the url of the site that hosts the audio file * data - a string, the filepath of the audio file you want to upload to Tumblr

#Creating an audio file
client.create_audio(blogName, caption="Rock out.", data="/Users/johnb/Music/my/new/sweet/album.mp3")

#lets use soundcloud!
client.create_audio(blogName, caption="Mega rock out.", external_url="https://soundcloud.com/skrillex/sets/recess")

Creating a video post

Creating a video post allows for all default options and has three other options. Like the other post types, it has some restrictions. You cannot use the embed and data parameters at the same time. * caption - a string, the caption for your post * embed - a string, the HTML embed code for the video * data - a string, the path of the file you want to upload

#Creating an upload from YouTube
client.create_video(blogName, caption="Jon Snow. Mega ridiculous sword.",
                    embed="http://www.youtube.com/watch?v=40pUYLacrj4")

#Creating a video post from local file
client.create_video(blogName, caption="testing", data="/Users/johnb/testing/ok/blah.mov")

Editing a post

Updating a post requires you knowing what type a post you're updating. You'll be able to supply to the post any of the options given above for updates.

client.edit_post(blogName, id=post_id, type="text", title="Updated")
client.edit_post(blogName, id=post_id, type="photo", data="/Users/johnb/mega/awesome.jpg")

Reblogging a Post

Reblogging a post just requires knowing the post id and the reblog key, which is supplied in the JSON of any post object.

client.reblog(blogName, id=125356, reblog_key="reblog_key")

Deleting a post

Deleting just requires that you own the post and have the post id

client.delete_post(blogName, 123456) # Deletes your post :(

A note on tags: When passing tags, as params, please pass them as a list (not a comma-separated string):

client.create_text(blogName, tags=['hello', 'world'], ...)

Getting notes for a post

In order to get the notes for a post, you need to have the post id and the blog that it is on.

data = client.notes(blogName, id='123456')

The results include a timestamp you can use to make future calls.

data = client.notes(blogName, id='123456', before_timestamp=data["_links"]["next"]["query_params"]["before_timestamp"])

Tagged Methods

# get posts with a given tag
client.tagged(tag, **params)

Using the interactive console

This client comes with a nice interactive console to run you through the OAuth process, grab your tokens (and store them for future use).

You'll need pyyaml installed to run it, but then it's just:

$ python interactive-console.py

and away you go! Tokens are stored in ~/.tumblr and are also shared by other Tumblr API clients like the Ruby client.

Running tests

The tests (and coverage reports) are run with nose, like this:

python setup.py test

Author: tumblr
Source Code: https://github.com/tumblr/pytumblr
License: Apache-2.0 license

#python #api 

Mike  Kozey

Mike Kozey

1656151740

Test_cov_console: Flutter Console Coverage Test

Flutter Console Coverage Test

This small dart tools is used to generate Flutter Coverage Test report to console

How to install

Add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dev_dependencies:
  test_cov_console: ^0.2.2

How to run

run the following command to make sure all flutter library is up-to-date

flutter pub get
Running "flutter pub get" in coverage...                            0.5s

run the following command to generate lcov.info on coverage directory

flutter test --coverage
00:02 +1: All tests passed!

run the tool to generate report from lcov.info

flutter pub run test_cov_console
---------------------------------------------|---------|---------|---------|-------------------|
File                                         |% Branch | % Funcs | % Lines | Uncovered Line #s |
---------------------------------------------|---------|---------|---------|-------------------|
lib/src/                                     |         |         |         |                   |
 print_cov.dart                              |  100.00 |  100.00 |   88.37 |...,149,205,206,207|
 print_cov_constants.dart                    |    0.00 |    0.00 |    0.00 |    no unit testing|
lib/                                         |         |         |         |                   |
 test_cov_console.dart                       |    0.00 |    0.00 |    0.00 |    no unit testing|
---------------------------------------------|---------|---------|---------|-------------------|
 All files with unit testing                 |  100.00 |  100.00 |   88.37 |                   |
---------------------------------------------|---------|---------|---------|-------------------|

Optional parameter

If not given a FILE, "coverage/lcov.info" will be used.
-f, --file=<FILE>                      The target lcov.info file to be reported
-e, --exclude=<STRING1,STRING2,...>    A list of contains string for files without unit testing
                                       to be excluded from report
-l, --line                             It will print Lines & Uncovered Lines only
                                       Branch & Functions coverage percentage will not be printed
-i, --ignore                           It will not print any file without unit testing
-m, --multi                            Report from multiple lcov.info files
-c, --csv                              Output to CSV file
-o, --output=<CSV-FILE>                Full path of output CSV file
                                       If not given, "coverage/test_cov_console.csv" will be used
-t, --total                            Print only the total coverage
                                       Note: it will ignore all other option (if any), except -m
-p, --pass=<MINIMUM>                   Print only the whether total coverage is passed MINIMUM value or not
                                       If the value >= MINIMUM, it will print PASSED, otherwise FAILED
                                       Note: it will ignore all other option (if any), except -m
-h, --help                             Show this help

example run the tool with parameters

flutter pub run test_cov_console --file=coverage/lcov.info --exclude=_constants,_mock
---------------------------------------------|---------|---------|---------|-------------------|
File                                         |% Branch | % Funcs | % Lines | Uncovered Line #s |
---------------------------------------------|---------|---------|---------|-------------------|
lib/src/                                     |         |         |         |                   |
 print_cov.dart                              |  100.00 |  100.00 |   88.37 |...,149,205,206,207|
lib/                                         |         |         |         |                   |
 test_cov_console.dart                       |    0.00 |    0.00 |    0.00 |    no unit testing|
---------------------------------------------|---------|---------|---------|-------------------|
 All files with unit testing                 |  100.00 |  100.00 |   88.37 |                   |
---------------------------------------------|---------|---------|---------|-------------------|

report for multiple lcov.info files (-m, --multi)

It support to run for multiple lcov.info files with the followings directory structures:
1. No root module
<root>/<module_a>
<root>/<module_a>/coverage/lcov.info
<root>/<module_a>/lib/src
<root>/<module_b>
<root>/<module_b>/coverage/lcov.info
<root>/<module_b>/lib/src
...
2. With root module
<root>/coverage/lcov.info
<root>/lib/src
<root>/<module_a>
<root>/<module_a>/coverage/lcov.info
<root>/<module_a>/lib/src
<root>/<module_b>
<root>/<module_b>/coverage/lcov.info
<root>/<module_b>/lib/src
...
You must run test_cov_console on <root> dir, and the report would be grouped by module, here is
the sample output for directory structure 'with root module':
flutter pub run test_cov_console --file=coverage/lcov.info --exclude=_constants,_mock --multi
---------------------------------------------|---------|---------|---------|-------------------|
File                                         |% Branch | % Funcs | % Lines | Uncovered Line #s |
---------------------------------------------|---------|---------|---------|-------------------|
lib/src/                                     |         |         |         |                   |
 print_cov.dart                              |  100.00 |  100.00 |   88.37 |...,149,205,206,207|
lib/                                         |         |         |         |                   |
 test_cov_console.dart                       |    0.00 |    0.00 |    0.00 |    no unit testing|
---------------------------------------------|---------|---------|---------|-------------------|
 All files with unit testing                 |  100.00 |  100.00 |   88.37 |                   |
---------------------------------------------|---------|---------|---------|-------------------|
---------------------------------------------|---------|---------|---------|-------------------|
File - module_a -                            |% Branch | % Funcs | % Lines | Uncovered Line #s |
---------------------------------------------|---------|---------|---------|-------------------|
lib/src/                                     |         |         |         |                   |
 print_cov.dart                              |  100.00 |  100.00 |   88.37 |...,149,205,206,207|
lib/                                         |         |         |         |                   |
 test_cov_console.dart                       |    0.00 |    0.00 |    0.00 |    no unit testing|
---------------------------------------------|---------|---------|---------|-------------------|
 All files with unit testing                 |  100.00 |  100.00 |   88.37 |                   |
---------------------------------------------|---------|---------|---------|-------------------|
---------------------------------------------|---------|---------|---------|-------------------|
File - module_b -                            |% Branch | % Funcs | % Lines | Uncovered Line #s |
---------------------------------------------|---------|---------|---------|-------------------|
lib/src/                                     |         |         |         |                   |
 print_cov.dart                              |  100.00 |  100.00 |   88.37 |...,149,205,206,207|
lib/                                         |         |         |         |                   |
 test_cov_console.dart                       |    0.00 |    0.00 |    0.00 |    no unit testing|
---------------------------------------------|---------|---------|---------|-------------------|
 All files with unit testing                 |  100.00 |  100.00 |   88.37 |                   |
---------------------------------------------|---------|---------|---------|-------------------|

Output to CSV file (-c, --csv, -o, --output)

flutter pub run test_cov_console -c --output=coverage/test_coverage.csv

#### sample CSV output file:
File,% Branch,% Funcs,% Lines,Uncovered Line #s
lib/,,,,
test_cov_console.dart,0.00,0.00,0.00,no unit testing
lib/src/,,,,
parser.dart,100.00,100.00,97.22,"97"
parser_constants.dart,100.00,100.00,100.00,""
print_cov.dart,100.00,100.00,82.91,"29,49,51,52,171,174,177,180,183,184,185,186,187,188,279,324,325,387,388,389,390,391,392,393,394,395,398"
print_cov_constants.dart,0.00,0.00,0.00,no unit testing
All files with unit testing,100.00,100.00,86.07,""

Installing

Use this package as an executable

Install it

You can install the package from the command line:

dart pub global activate test_cov_console

Use it

The package has the following executables:

$ test_cov_console

Use this package as a library

Depend on it

Run this command:

With Dart:

 $ dart pub add test_cov_console

With Flutter:

 $ flutter pub add test_cov_console

This will add a line like this to your package's pubspec.yaml (and run an implicit dart pub get):

dependencies:
  test_cov_console: ^0.2.2

Alternatively, your editor might support dart pub get or flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:test_cov_console/test_cov_console.dart';

example/lib/main.dart

import 'package:flutter/material.dart';

void main() {
  runApp(MyApp());
}

class MyApp extends StatelessWidget {
  // This widget is the root of your application.
  @override
  Widget build(BuildContext context) {
    return MaterialApp(
      title: 'Flutter Demo',
      theme: ThemeData(
        // This is the theme of your application.
        //
        // Try running your application with "flutter run". You'll see the
        // application has a blue toolbar. Then, without quitting the app, try
        // changing the primarySwatch below to Colors.green and then invoke
        // "hot reload" (press "r" in the console where you ran "flutter run",
        // or simply save your changes to "hot reload" in a Flutter IDE).
        // Notice that the counter didn't reset back to zero; the application
        // is not restarted.
        primarySwatch: Colors.blue,
        // This makes the visual density adapt to the platform that you run
        // the app on. For desktop platforms, the controls will be smaller and
        // closer together (more dense) than on mobile platforms.
        visualDensity: VisualDensity.adaptivePlatformDensity,
      ),
      home: MyHomePage(title: 'Flutter Demo Home Page'),
    );
  }
}

class MyHomePage extends StatefulWidget {
  MyHomePage({Key? key, required this.title}) : super(key: key);

  // This widget is the home page of your application. It is stateful, meaning
  // that it has a State object (defined below) that contains fields that affect
  // how it looks.

  // This class is the configuration for the state. It holds the values (in this
  // case the title) provided by the parent (in this case the App widget) and
  // used by the build method of the State. Fields in a Widget subclass are
  // always marked "final".

  final String title;

  @override
  _MyHomePageState createState() => _MyHomePageState();
}

class _MyHomePageState extends State<MyHomePage> {
  int _counter = 0;

  void _incrementCounter() {
    setState(() {
      // This call to setState tells the Flutter framework that something has
      // changed in this State, which causes it to rerun the build method below
      // so that the display can reflect the updated values. If we changed
      // _counter without calling setState(), then the build method would not be
      // called again, and so nothing would appear to happen.
      _counter++;
    });
  }

  @override
  Widget build(BuildContext context) {
    // This method is rerun every time setState is called, for instance as done
    // by the _incrementCounter method above.
    //
    // The Flutter framework has been optimized to make rerunning build methods
    // fast, so that you can just rebuild anything that needs updating rather
    // than having to individually change instances of widgets.
    return Scaffold(
      appBar: AppBar(
        // Here we take the value from the MyHomePage object that was created by
        // the App.build method, and use it to set our appbar title.
        title: Text(widget.title),
      ),
      body: Center(
        // Center is a layout widget. It takes a single child and positions it
        // in the middle of the parent.
        child: Column(
          // Column is also a layout widget. It takes a list of children and
          // arranges them vertically. By default, it sizes itself to fit its
          // children horizontally, and tries to be as tall as its parent.
          //
          // Invoke "debug painting" (press "p" in the console, choose the
          // "Toggle Debug Paint" action from the Flutter Inspector in Android
          // Studio, or the "Toggle Debug Paint" command in Visual Studio Code)
          // to see the wireframe for each widget.
          //
          // Column has various properties to control how it sizes itself and
          // how it positions its children. Here we use mainAxisAlignment to
          // center the children vertically; the main axis here is the vertical
          // axis because Columns are vertical (the cross axis would be
          // horizontal).
          mainAxisAlignment: MainAxisAlignment.center,
          children: <Widget>[
            Text(
              'You have pushed the button this many times:',
            ),
            Text(
              '$_counter',
              style: Theme.of(context).textTheme.headline4,
            ),
          ],
        ),
      ),
      floatingActionButton: FloatingActionButton(
        onPressed: _incrementCounter,
        tooltip: 'Increment',
        child: Icon(Icons.add),
      ), // This trailing comma makes auto-formatting nicer for build methods.
    );
  }
}

Author: DigitalKatalis
Source Code: https://github.com/DigitalKatalis/test_cov_console 
License: BSD-3-Clause license

#flutter #dart #test 

Yoav Reisler

1589604132

Creating UI with like SwiftUI’s syntax by the power of Texture framework

In this article, I’m going to talk about “Creating UI with code and how we could write like SwiftUI’s syntax with Texture”
As a premise, the targets people in this article:

  • Trying to create UI without Interface Builder. (It means writing the code to set the layout constraints up.)
  • And feels tired with so many constraints and hard to recognize a layout from the source-code.

#swiftui #ios #swift #uikit #design

Create an App like YouTube

Are you planning to build an app like YouTube? AppClues Infotech is the best custom video-sharing mobile app development company in the USA and offers excellent services worldwide. We deliver a feature-rich and user-engaging mobile app with the latest features & technology at an affordable price.

We have a highly-skilled developers team that will assist you in the success of your dream mobile app project.

Get in Touch with our Industry Experts Today! Connect with some of our top app developers to get a clear sense of what developing your app is going to take.

For more info:
Call: +1-978-309-9910
Email: info@appcluesinfotech.com

#create an app like youtube #cost to create an app like youtube #make an app like youtube #create video sharing app like youtube #make video streaming app like youtube

How Much Does it Cost to Make an App like Netflix?

Knowing the influence of the internet in our lives today, it will be difficult to imagine our lives without it. There are a plethora of internet-based services that have revolutionized the world such as emails, blogs, social media and so many of them. The day we are today, would have not been the same, if these services were not available.

It reminds us of one such portal that has been entertaining us for many years. Netflix, which every individual loves to watch and enjoy. Not a lot of you know about it, Netflix came up in the world even before Google.

Factors Deciding the Cost of Netflix like Application

Having known such incredible thoughts about the application, learn about the factors that decide the cost of app like Netflix or YouTube.

App Features
The more the features, the more would have cost. It is better to keep only core features in version 1 of the app to reduce the cost. More features can be added in the next version once the app is geared up.

App Design
People do not like using complex applications. So it is important to keep design simple and standard. A simple design allows users to get the content they are looking for and helps them stay hooked to the application.

App Platform
There would be a considerable difference in the cost of application depending on the app platform such as Android and iOS. The applications developed on Android would be costlier than applications developed on iOS, as it needs to be considered for different devices and screen sizes.

App Developers
It is better to prefer India for development rather than in the US. Especially entertainment application companies like WebClues Infotech and AppClues Infotech are the most preferred companies to develop such kinds of applications.

Mobile Wallets
Prefer integrating mobile wallets into your app. It takes less time to make payments for users while eliminating a lot of payment hassles.

The world denotes Netflix as a commercial-free movie or TV show platform, which provides all the episodes of a series in a row, taking the viewing experience just to another level. Giving users the world of entertainment, it is accessible for multiple Android and iOS devices.

The rough estimate or approximate cost of developing an app like Netflix is $10,000 to $30,000 every platform. At AppClues Infotech, we are capable of developing the best app like Netflix or YouTube that can earn you more number of users.

#how to create a streaming app like netflix #creating a movies and tv shows streaming app like netflix #how to start a streaming service like netflix #how to make a streaming app like netflix #create streaming app like netflix #cost to build a video streaming app like netflix