Covr: Test Coverage Reports for R

covr  

Track test coverage for your R package and view reports locally or (optionally) upload the results to codecov or coveralls.

Installation

install.packages("covr")

# For devel version
devtools::install_github("r-lib/covr")

The easiest way to setup covr on Travis-CI is with usethis.

usethis::use_coverage()

Usage

For local development a coverage report can be used to inspect coverage for each line in your package. Note requires the DT package to be installed.

library(covr)

# If run with no arguments implicitly calls `package_coverage()`
report()

covr also defines an RStudio Addin, which runs report() on the active project. This can be used via the Addin menu or by binding the action to a shortcut, e.g. Ctrl-Shift-C.

Interactively

# If run with the working directory within the package source.
package_coverage()

# or a package in another directory
cov <- package_coverage("/dir/lintr")

# view results as a data.frame
as.data.frame(cov)

# zero_coverage() shows only uncovered lines.
# If run within RStudio, `zero_coverage()` will open a marker pane with the
# uncovered lines.
zero_coverage(cov)

Automated reports

Codecov

If you are already using Travis-CI add the following to your project's .travis.yml to track your coverage results over time with Codecov.

after_success:
  - Rscript -e 'covr::codecov()'

If you are using Appveyor CI then you can add the lines below to your project's appveyor.yml:

on_success:
  - Rscript -e "covr::codecov()"

You also need to install covr, either by adding it to the Suggests: field of your package's DESCRIPTION file or also to Remotes: r-lib/covr if you want to install the development version.

To use other CI services or if you want to upload a coverage report locally you can set environment variable CODECOV_TOKEN to the token generated on the settings page of https://codecov.io.

Coveralls

Alternatively you can upload your results to Coveralls using covr::coveralls().

after_success:
  - Rscript -e 'covr::coveralls()'

For CI systems not supported by coveralls you need to set the COVERALLS_TOKEN environment variable. It is wise to use a Secure Variable so that it is not revealed publicly.

Also you will need to turn on coveralls for your project at https://coveralls.io/repos.

Exclusions

covr supports a few of different ways of excluding some or all of a file.

.covrignore file

A .covrignore file located in your package's root directory can be used to exclude files or directories.

The lines in the .covrignore file are interpreted as a list of file globs to ignore. It uses the globbing rules in Sys.glob(). Any directories listed will ignore all the files in the directory.

Alternative locations for the file can be set by the environment variable COVR_COVRIGNORE or the R option covr.covrignore.

The .covrignore file should be added to your .RBuildignore file unless you want to distribute it with your package. If so it can be added to inst/.covrignore instead.

Function Exclusions

The function_exclusions argument to package_coverage() can be used to exclude functions by name. This argument takes a vector of regular expressions matching functions to exclude.

# exclude print functions
package_coverage(function_exclusions = "print\\.")

# exclude `.onLoad` function
package_coverage(function_exclusions = "\\.onLoad")

Line Exclusions

The line_exclusions argument to package_coverage() can be used to exclude some or all of a file. This argument takes a list of filenames or named ranges to exclude.

# exclude whole file of R/test.R
package_coverage(line_exclusions = "R/test.R")

# exclude lines 1 to 10 and 15 from R/test.R
package_coverage(line_exclusions = list("R/test.R" = c(1:10, 15)))

# exclude lines 1 to 10 from R/test.R, all of R/test2.R
package_coverage(line_exclusions = list("R/test.R" = c(1, 10), "R/test2.R"))

Exclusion Comments

In addition you can exclude lines from the coverage by putting special comments in your source code.

This can be done per line.

f1 <- function(x) {
  x + 1 # nocov
}

Or by specifying a range with a start and end.

f2 <- function(x) { # nocov start
  x + 2
} # nocov end

The patterns used can be specified by setting the global options covr.exclude_pattern, covr.exclude_start, covr.exclude_end.

NB: The same pattern applies to exclusions in the src folder, so skipped lines in, e.g., C code (where comments can start with //) should look like // # nocov.

FAQ

Will covr work with testthat, RUnit, etc...

Covr should be compatible with any testing package, it uses tools::testInstalledPackage() to run your packages tests.

Will covr work with alternative compilers such as ICC

Covr now supports Intel's icc compiler, thanks to work contributed by Qin Wang at Oracle.

Covr is known to work with clang versions 3.5+ and gcc version 4.2+.

If the appropriate gcov version is not on your path you can set the appropriate location with the covr.gcov options. If you set this path to "" it will turn off coverage of compiled code.

options(covr.gcov = "path/to/gcov")

How does covr work?

covr tracks test coverage by modifying a package's code to add tracking calls to each call.

The vignette vignettes/how_it_works.Rmd contains a detailed explanation of the technique and the rationale behind it.

You can view the vignette from within R using

vignette("how_it_works", package = "covr")

Why can't covr run during R CMD check

Because covr modifies the package code it is possible there are unknown edge cases where that modification affects the output. In addition when tracking coverage for compiled code covr compiles the package without optimization, which can modify behavior (usually due to package bugs which are masked with higher optimization levels).

Alternative Coverage Tools

• https://github.com/MangoTheCat/testCoverage (no longer supported)
• R-coverage (no longer supported)

Code of Conduct

Please note that the covr project is released with a Contributor Code of Conduct. By contributing to this project, you agree to abide by its terms.

Download Details:

Author: r-lib
Source Code: https://github.com/r-lib/covr 
License: Unknown, MIT licenses found

#r #test #cover 

What is GEEK

Buddha Community

CSharp REPL: A Command Line C# REPL with Syntax Highlighting

C# REPL

A cross-platform command line REPL for the rapid experimentation and exploration of C#. It supports intellisense, installing NuGet packages, and referencing local .NET projects and assemblies.

 

(click to view animation)

C# REPL provides the following features:

• Syntax highlighting via ANSI escape sequences
• Intellisense with fly-out documentation
• Nuget package installation
• Reference local assemblies, solutions, and projects
• Navigate to source via Source Link
• IL disassembly (both Debug and Release mode)
• Fast and flicker-free rendering. A "diff" algorithm is used to only render what's changed.

Installation

C# REPL is a .NET 6 global tool, and runs on Windows 10, Mac OS, and Linux. It can be installed via:

dotnet tool install -g csharprepl

If you're running on Mac OS Catalina (10.15) or later, make sure you follow any additional directions printed to the screen. You may need to update your PATH variable in order to use .NET global tools.

After installation is complete, run csharprepl to begin. C# REPL can be updated via dotnet tool update -g csharprepl.

Usage:

Run csharprepl from the command line to begin an interactive session. The default colorscheme uses the color palette defined by your terminal, but these colors can be changed using a theme.json file provided as a command line argument.

Evaluating Code

Type some C# into the prompt and press Enter to run it. The result, if any, will be printed:

> Console.WriteLine("Hello World")
Hello World

> DateTime.Now.AddDays(8)
[6/7/2021 5:13:00 PM]

To evaluate multiple lines of code, use Shift+Enter to insert a newline:

> var x = 5;
  var y = 8;
  x * y
40

Additionally, if the statement is not a "complete statement" a newline will automatically be inserted when Enter is pressed. For example, in the below code, the first line is not a syntactically complete statement, so when we press enter we'll go down to a new line:

> if (x == 5)
  | // caret position, after we press Enter on Line 1

Finally, pressing Ctrl+Enter will show a "detailed view" of the result. For example, for the DateTime.Now expression below, on the first line we pressed Enter, and on the second line we pressed Ctrl+Enter to view more detailed output:

> DateTime.Now // Pressing Enter shows a reasonable representation
[5/30/2021 5:13:00 PM]

> DateTime.Now // Pressing Ctrl+Enter shows a detailed representation
[5/30/2021 5:13:00 PM] {
  Date: [5/30/2021 12:00:00 AM],
  Day: 30,
  DayOfWeek: Sunday,
  DayOfYear: 150,
  Hour: 17,
  InternalKind: 9223372036854775808,
  InternalTicks: 637579915804530992,
  Kind: Local,
  Millisecond: 453,
  Minute: 13,
  Month: 5,
  Second: 0,
  Ticks: 637579915804530992,
  TimeOfDay: [17:13:00.4530992],
  Year: 2021,
  _dateData: 9860951952659306800
}

A note on semicolons: C# expressions do not require semicolons, but statements do. If a statement is missing a required semicolon, a newline will be added instead of trying to run the syntatically incomplete statement; simply type the semicolon to complete the statement.

> var now = DateTime.Now; // assignment statement, semicolon required

> DateTime.Now.AddDays(8) // expression, we don't need a semicolon
[6/7/2021 5:03:05 PM]

Keyboard Shortcuts

• Basic Usage
  • Ctrl+C - Cancel current line
  • Ctrl+L - Clear screen
  • Enter - Evaluate the current line if it's a syntactically complete statement; otherwise add a newline
  • Control+Enter - Evaluate the current line, and return a more detailed representation of the result
  • Shift+Enter - Insert a new line (this does not currently work on Linux or Mac OS; Hopefully this will work in .NET 7)
  • Ctrl+Shift+C - Copy current line to clipboard
  • Ctrl+V, Shift+Insert, and Ctrl+Shift+V - Paste text to prompt. Automatically trims leading indent
• Code Actions
  • F1 - Opens the MSDN documentation for the class/method under the caret (example)
  • F9 - Shows the IL (intermediate language) for the current statement in Debug mode.
  • Ctrl+F9 - Shows the IL for the current statement with Release mode optimizations.
  • F12 - Opens the source code in the browser for the class/method under the caret, if the assembly supports Source Link.
• Autocompletion
  • Ctrl+Space - Open autocomplete menu. If there's a single option, pressing Ctrl+Space again will select the option
  • Enter, Right Arrow, Tab - Select active autocompletion option
  • Escape - closes autocomplete menu
• Text Navigation
  • Home and End - Navigate to beginning of a single line and end of a single line, respectively
  • Ctrl+Home and Ctrl+End - Navigate to beginning of line and end across multiple lines in a multiline prompt, respectively
  • Arrows - Navigate characters within text
  • Ctrl+Arrows - Navigate words within text
  • Ctrl+Backspace - Delete previous word
  • Ctrl+Delete - Delete next word

Adding References

Use the #r command to add assembly or nuget references.

• For assembly references, run #r "AssemblyName" or #r "path/to/assembly.dll"
• For project references, run #r "path/to/project.csproj". Solution files (.sln) can also be referenced.
• For nuget references, run #r "nuget: PackageName" to install the latest version of a package, or #r "nuget: PackageName, 13.0.5" to install a specific version (13.0.5 in this case).

To run ASP.NET applications inside the REPL, start the csharprepl application with the --framework parameter, specifying the Microsoft.AspNetCore.App shared framework. Then, use the above #r command to reference the application DLL. See the Command Line Configuration section below for more details.

csharprepl --framework  Microsoft.AspNetCore.App

Command Line Configuration

The C# REPL supports multiple configuration flags to control startup, behavior, and appearance:

csharprepl [OPTIONS] [response-file.rsp] [script-file.csx] [-- <additional-arguments>]

Supported options are:

• OPTIONS:
  • -r <dll> or --reference <dll>: Reference an assembly, project file, or nuget package. Can be specified multiple times. Uses the same syntax as #r statements inside the REPL. For example, csharprepl -r "nuget:Newtonsoft.Json" "path/to/myproj.csproj"
    • When an assembly or project is referenced, assemblies in the containing directory will be added to the assembly search path. This means that you don't need to manually add references to all of your assembly's dependencies (e.g. other references and nuget packages). Referencing the main entry assembly is enough.
  • -u <namespace> or --using <namespace>: Add a using statement. Can be specified multiple times.
  • -f <framework> or --framework <framework>: Reference a shared framework. The available shared frameworks depends on the local .NET installation, and can be useful when running an ASP.NET application from the REPL. Example frameworks are:
    • Microsoft.NETCore.App (default)
    • Microsoft.AspNetCore.All
    • Microsoft.AspNetCore.App
    • Microsoft.WindowsDesktop.App
  • -t <theme.json> or --theme <theme.json>: Read a theme file for syntax highlighting. This theme file associates C# syntax classifications with colors. The color values can be full RGB, or ANSI color names (defined in your terminal's theme). The NO_COLOR standard is supported.
  • --trace: Produce a trace file in the current directory that logs CSharpRepl internals. Useful for CSharpRepl bug reports.
  • -v or --version: Show version number and exit.
  • -h or --help: Show help and exit.
• response-file.rsp: A filepath of an .rsp file, containing any of the above command line options.
• script-file.csx: A filepath of a .csx file, containing lines of C# to evaluate before starting the REPL. Arguments to this script can be passed as <additional-arguments>, after a double hyphen (--), and will be available in a global args variable.

If you have dotnet-suggest enabled, all options can be tab-completed, including values provided to --framework and .NET namespaces provided to --using.

Integrating with other software

C# REPL is a standalone software application, but it can be useful to integrate it with other developer tools:

Windows Terminal

To add C# REPL as a menu entry in Windows Terminal, add the following profile to Windows Terminal's settings.json configuration file (under the JSON property profiles.list):

{
    "name": "C# REPL",
    "commandline": "csharprepl"
},

To get the exact colors shown in the screenshots in this README, install the Windows Terminal Dracula theme.

Visual Studio Code

To use the C# REPL with Visual Studio Code, simply run the csharprepl command in the Visual Studio Code terminal. To send commands to the REPL, use the built-in Terminal: Run Selected Text In Active Terminal command from the Command Palette (workbench.action.terminal.runSelectedText).

Windows OS

To add the C# REPL to the Windows Start Menu for quick access, you can run the following PowerShell command, which will start C# REPL in Windows Terminal:

$shell = New-Object -ComObject WScript.Shell
$shortcut = $shell.CreateShortcut("$env:appdata\Microsoft\Windows\Start Menu\Programs\csharprepl.lnk")
$shortcut.TargetPath = "wt.exe"
$shortcut.Arguments = "-w 0 nt csharprepl.exe"
$shortcut.Save()

You may also wish to add a shorter alias for C# REPL, which can be done by creating a .cmd file somewhere on your path. For example, put the following contents in C:\Users\username\.dotnet\tools\csr.cmd:

wt -w 0 nt csharprepl

This will allow you to launch C# REPL by running csr from anywhere that accepts Windows commands, like the Window Run dialog.

Comparison with other REPLs

This project is far from being the first REPL for C#. Here are some other projects; if this project doesn't suit you, another one might!

Visual Studio's C# Interactive pane is full-featured (it has syntax highlighting and intellisense) and is part of Visual Studio. This deep integration with Visual Studio is both a benefit from a workflow perspective, and a drawback as it's not cross-platform. As far as I know, the C# Interactive pane does not support NuGet packages or navigating to documentation/source code. Subjectively, it does not follow typical command line keybindings, so can feel a bit foreign.

csi.exe ships with C# and is a command line REPL. It's great because it's a cross platform REPL that comes out of the box, but it doesn't support syntax highlighting or autocompletion.

dotnet script allows you to run C# scripts from the command line. It has a REPL built-in, but the predominant focus seems to be as a script runner. It's a great tool, though, and has a strong community following.

dotnet interactive is a tool from Microsoft that creates a Jupyter notebook for C#, runnable through Visual Studio Code. It also provides a general framework useful for running REPLs.

Download Details:
Author: waf
Source Code: https://github.com/waf/CSharpRepl
License: MPL-2.0 License

#dotnet  #aspdotnet  #csharp 

Testing Microservices Applications

The shift towards microservices and modular applications makes testing more important and more challenging at the same time. You have to make sure that the microservices running in containers perform well and as intended, but you can no longer rely on conventional testing strategies to get the job done.

This is where new testing approaches are needed. Testing your microservices applications require the right approach, a suitable set of tools, and immense attention to details. This article will guide you through the process of testing your microservices and talk about the challenges you will have to overcome along the way. Let’s get started, shall we?

A Brave New World

Traditionally, testing a monolith application meant configuring a test environment and setting up all of the application components in a way that matched the production environment. It took time to set up the testing environment, and there were a lot of complexities around the process.

Testing also requires the application to run in full. It is not possible to test monolith apps on a per-component basis, mainly because there is usually a base code that ties everything together, and the app is designed to run as a complete app to work properly.

Microservices running in containers offer one particular advantage: universal compatibility. You don’t have to match the testing environment with the deployment architecture exactly, and you can get away with testing individual components rather than the full app in some situations.

Of course, you will have to embrace the new cloud-native approach across the pipeline. Rather than creating critical dependencies between microservices, you need to treat each one as a semi-independent module.

The only monolith or centralized portion of the application is the database, but this too is an easy challenge to overcome. As long as you have a persistent database running on your test environment, you can perform tests at any time.

Keep in mind that there are additional things to focus on when testing microservices.

• Microservices rely on network communications to talk to each other, so network reliability and requirements must be part of the testing.
• Automation and infrastructure elements are now added as codes, and you have to make sure that they also run properly when microservices are pushed through the pipeline
• While containerization is universal, you still have to pay attention to specific dependencies and create a testing strategy that allows for those dependencies to be included

Test containers are the method of choice for many developers. Unlike monolith apps, which lets you use stubs and mocks for testing, microservices need to be tested in test containers. Many CI/CD pipelines actually integrate production microservices as part of the testing process.

Contract Testing as an Approach

As mentioned before, there are many ways to test microservices effectively, but the one approach that developers now use reliably is contract testing. Loosely coupled microservices can be tested in an effective and efficient way using contract testing, mainly because this testing approach focuses on contracts; in other words, it focuses on how components or microservices communicate with each other.

Syntax and semantics construct how components communicate with each other. By defining syntax and semantics in a standardized way and testing microservices based on their ability to generate the right message formats and meet behavioral expectations, you can rest assured knowing that the microservices will behave as intended when deployed.

Ways to Test Microservices

It is easy to fall into the trap of making testing microservices complicated, but there are ways to avoid this problem. Testing microservices doesn’t have to be complicated at all when you have the right strategy in place.

There are several ways to test microservices too, including:

• Unit testing: Which allows developers to test microservices in a granular way. It doesn’t limit testing to individual microservices, but rather allows developers to take a more granular approach such as testing individual features or runtimes.
• Integration testing: Which handles the testing of microservices in an interactive way. Microservices still need to work with each other when they are deployed, and integration testing is a key process in making sure that they do.
• End-to-end testing: Which⁠—as the name suggests⁠—tests microservices as a complete app. This type of testing enables the testing of features, UI, communications, and other components that construct the app.

What’s important to note is the fact that these testing approaches allow for asynchronous testing. After all, asynchronous development is what makes developing microservices very appealing in the first place. By allowing for asynchronous testing, you can also make sure that components or microservices can be updated independently to one another.

#blog #microservices #testing #caylent #contract testing #end-to-end testing #hoverfly #integration testing #microservices #microservices architecture #pact #testing #unit testing #vagrant #vcr

Dotnet Script: Run C# Scripts From The .NET CLI

dotnet script

Run C# scripts from the .NET CLI, define NuGet packages inline and edit/debug them in VS Code - all of that with full language services support from OmniSharp.

NuGet Packages

Name	Version	Framework(s)
dotnet-script (global tool)		net6.0, net5.0, netcoreapp3.1
Dotnet.Script (CLI as Nuget)		net6.0, net5.0, netcoreapp3.1
Dotnet.Script.Core		netcoreapp3.1 , netstandard2.0
Dotnet.Script.DependencyModel		netstandard2.0
Dotnet.Script.DependencyModel.Nuget		netstandard2.0

Installing

Prerequisites

The only thing we need to install is .NET Core 3.1 or .NET 5.0 SDK.

.NET Core Global Tool

.NET Core 2.1 introduced the concept of global tools meaning that you can install dotnet-script using nothing but the .NET CLI.

dotnet tool install -g dotnet-script

You can invoke the tool using the following command: dotnet-script
Tool 'dotnet-script' (version '0.22.0') was successfully installed.

The advantage of this approach is that you can use the same command for installation across all platforms. .NET Core SDK also supports viewing a list of installed tools and their uninstallation.

dotnet tool list -g

Package Id         Version      Commands
---------------------------------------------
dotnet-script      0.22.0       dotnet-script

dotnet tool uninstall dotnet-script -g

Tool 'dotnet-script' (version '0.22.0') was successfully uninstalled.

Windows

choco install dotnet.script

We also provide a PowerShell script for installation.

(new-object Net.WebClient).DownloadString("https://raw.githubusercontent.com/filipw/dotnet-script/master/install/install.ps1") | iex

Linux and Mac

curl -s https://raw.githubusercontent.com/filipw/dotnet-script/master/install/install.sh | bash

If permission is denied we can try with sudo

curl -s https://raw.githubusercontent.com/filipw/dotnet-script/master/install/install.sh | sudo bash

Docker

A Dockerfile for running dotnet-script in a Linux container is available. Build:

cd build
docker build -t dotnet-script -f Dockerfile ..

And run:

docker run -it dotnet-script --version

Github

You can manually download all the releases in zip format from the GitHub releases page.

Usage

Our typical helloworld.csx might look like this:

Console.WriteLine("Hello world!");

That is all it takes and we can execute the script. Args are accessible via the global Args array.

dotnet script helloworld.csx

Scaffolding

Simply create a folder somewhere on your system and issue the following command.

dotnet script init

This will create main.csx along with the launch configuration needed to debug the script in VS Code.

.
├── .vscode
│   └── launch.json
├── main.csx
└── omnisharp.json

We can also initialize a folder using a custom filename.

dotnet script init custom.csx

Instead of main.csx which is the default, we now have a file named custom.csx.

.
├── .vscode
│   └── launch.json
├── custom.csx
└── omnisharp.json

Note: Executing dotnet script init inside a folder that already contains one or more script files will not create the main.csx file.

Running scripts

Scripts can be executed directly from the shell as if they were executables.

foo.csx arg1 arg2 arg3

OSX/Linux

Just like all scripts, on OSX/Linux you need to have a #! and mark the file as executable via chmod +x foo.csx. If you use dotnet script init to create your csx it will automatically have the #! directive and be marked as executable.

The OSX/Linux shebang directive should be #!/usr/bin/env dotnet-script

#!/usr/bin/env dotnet-script
Console.WriteLine("Hello world");

You can execute your script using dotnet script or dotnet-script, which allows you to pass arguments to control your script execution more.

foo.csx arg1 arg2 arg3
dotnet script foo.csx -- arg1 arg2 arg3
dotnet-script foo.csx -- arg1 arg2 arg3

Passing arguments to scripts

All arguments after -- are passed to the script in the following way:

dotnet script foo.csx -- arg1 arg2 arg3

Then you can access the arguments in the script context using the global Args collection:

foreach (var arg in Args)
{
    Console.WriteLine(arg);
}

All arguments before -- are processed by dotnet script. For example, the following command-line

dotnet script -d foo.csx -- -d

will pass the -d before -- to dotnet script and enable the debug mode whereas the -d after -- is passed to script for its own interpretation of the argument.

NuGet Packages

dotnet script has built-in support for referencing NuGet packages directly from within the script.

#r "nuget: AutoMapper, 6.1.0"

Note: Omnisharp needs to be restarted after adding a new package reference

Package Sources

We can define package sources using a NuGet.Config file in the script root folder. In addition to being used during execution of the script, it will also be used by OmniSharp that provides language services for packages resolved from these package sources.

As an alternative to maintaining a local NuGet.Config file we can define these package sources globally either at the user level or at the computer level as described in Configuring NuGet Behaviour

It is also possible to specify packages sources when executing the script.

dotnet script foo.csx -s https://SomePackageSource

Multiple packages sources can be specified like this:

dotnet script foo.csx -s https://SomePackageSource -s https://AnotherPackageSource

Creating DLLs or Exes from a CSX file

Dotnet-Script can create a standalone executable or DLL for your script.

Switch	Long switch	description
-o	--output	Directory where the published executable should be placed. Defaults to a 'publish' folder in the current directory.
-n	--name	The name for the generated DLL (executable not supported at this time). Defaults to the name of the script.
	--dll	Publish to a .dll instead of an executable.
-c	--configuration	Configuration to use for publishing the script [Release/Debug]. Default is "Debug"
-d	--debug	Enables debug output.
-r	--runtime	The runtime used when publishing the self contained executable. Defaults to your current runtime.

The executable you can run directly independent of dotnet install, while the DLL can be run using the dotnet CLI like this:

dotnet script exec {path_to_dll} -- arg1 arg2

Caching

We provide two types of caching, the dependency cache and the execution cache which is explained in detail below. In order for any of these caches to be enabled, it is required that all NuGet package references are specified using an exact version number. The reason for this constraint is that we need to make sure that we don't execute a script with a stale dependency graph.

Dependency Cache

In order to resolve the dependencies for a script, a dotnet restore is executed under the hood to produce a project.assets.json file from which we can figure out all the dependencies we need to add to the compilation. This is an out-of-process operation and represents a significant overhead to the script execution. So this cache works by looking at all the dependencies specified in the script(s) either in the form of NuGet package references or assembly file references. If these dependencies matches the dependencies from the last script execution, we skip the restore and read the dependencies from the already generated project.assets.json file. If any of the dependencies has changed, we must restore again to obtain the new dependency graph.

Execution cache

In order to execute a script it needs to be compiled first and since that is a CPU and time consuming operation, we make sure that we only compile when the source code has changed. This works by creating a SHA256 hash from all the script files involved in the execution. This hash is written to a temporary location along with the DLL that represents the result of the script compilation. When a script is executed the hash is computed and compared with the hash from the previous compilation. If they match there is no need to recompile and we run from the already compiled DLL. If the hashes don't match, the cache is invalidated and we recompile.

You can override this automatic caching by passing --no-cache flag, which will bypass both caches and cause dependency resolution and script compilation to happen every time we execute the script.

Cache Location

The temporary location used for caches is a sub-directory named dotnet-script under (in order of priority):

1. The path specified for the value of the environment variable named DOTNET_SCRIPT_CACHE_LOCATION, if defined and value is not empty.
2. Linux distributions only: $XDG_CACHE_HOME if defined otherwise $HOME/.cache
3. macOS only: ~/Library/Caches
4. The value returned by Path.GetTempPath for the platform.

 

Debugging

The days of debugging scripts using Console.WriteLine are over. One major feature of dotnet script is the ability to debug scripts directly in VS Code. Just set a breakpoint anywhere in your script file(s) and hit F5(start debugging)

Script Packages

Script packages are a way of organizing reusable scripts into NuGet packages that can be consumed by other scripts. This means that we now can leverage scripting infrastructure without the need for any kind of bootstrapping.

Creating a script package

A script package is just a regular NuGet package that contains script files inside the content or contentFiles folder.

The following example shows how the scripts are laid out inside the NuGet package according to the standard convention .

└── contentFiles
    └── csx
        └── netstandard2.0
            └── main.csx

This example contains just the main.csx file in the root folder, but packages may have multiple script files either in the root folder or in subfolders below the root folder.

When loading a script package we will look for an entry point script to be loaded. This entry point script is identified by one of the following.

• A script called main.csx in the root folder
• A single script file in the root folder

If the entry point script cannot be determined, we will simply load all the scripts files in the package.

The advantage with using an entry point script is that we can control loading other scripts from the package.

Consuming a script package

To consume a script package all we need to do specify the NuGet package in the #loaddirective.

The following example loads the simple-targets package that contains script files to be included in our script.

#load "nuget:simple-targets-csx, 6.0.0"

using static SimpleTargets;
var targets = new TargetDictionary();

targets.Add("default", () => Console.WriteLine("Hello, world!"));

Run(Args, targets);

Note: Debugging also works for script packages so that we can easily step into the scripts that are brought in using the #load directive.

Remote Scripts

Scripts don't actually have to exist locally on the machine. We can also execute scripts that are made available on an http(s) endpoint.

This means that we can create a Gist on Github and execute it just by providing the URL to the Gist.

This Gist contains a script that prints out "Hello World"

We can execute the script like this

dotnet script https://gist.githubusercontent.com/seesharper/5d6859509ea8364a1fdf66bbf5b7923d/raw/0a32bac2c3ea807f9379a38e251d93e39c8131cb/HelloWorld.csx

That is a pretty long URL, so why don't make it a TinyURL like this:

dotnet script https://tinyurl.com/y8cda9zt

Script Location

A pretty common scenario is that we have logic that is relative to the script path. We don't want to require the user to be in a certain directory for these paths to resolve correctly so here is how to provide the script path and the script folder regardless of the current working directory.

public static string GetScriptPath([CallerFilePath] string path = null) => path;
public static string GetScriptFolder([CallerFilePath] string path = null) => Path.GetDirectoryName(path);

Tip: Put these methods as top level methods in a separate script file and #load that file wherever access to the script path and/or folder is needed.

REPL

This release contains a C# REPL (Read-Evaluate-Print-Loop). The REPL mode ("interactive mode") is started by executing dotnet-script without any arguments.

The interactive mode allows you to supply individual C# code blocks and have them executed as soon as you press Enter. The REPL is configured with the same default set of assembly references and using statements as regular CSX script execution.

Basic usage

Once dotnet-script starts you will see a prompt for input. You can start typing C# code there.

~$ dotnet script
> var x = 1;
> x+x
2

If you submit an unterminated expression into the REPL (no ; at the end), it will be evaluated and the result will be serialized using a formatter and printed in the output. This is a bit more interesting than just calling ToString() on the object, because it attempts to capture the actual structure of the object. For example:

~$ dotnet script
> var x = new List<string>();
> x.Add("foo");
> x
List<string>(1) { "foo" }
> x.Add("bar");
> x
List<string>(2) { "foo", "bar" }
>

Inline Nuget packages

REPL also supports inline Nuget packages - meaning the Nuget packages can be installed into the REPL from within the REPL. This is done via our #r and #load from Nuget support and uses identical syntax.

~$ dotnet script
> #r "nuget: Automapper, 6.1.1"
> using AutoMapper;
> typeof(MapperConfiguration)
[AutoMapper.MapperConfiguration]
> #load "nuget: simple-targets-csx, 6.0.0";
> using static SimpleTargets;
> typeof(TargetDictionary)
[Submission#0+SimpleTargets+TargetDictionary]

Multiline mode

Using Roslyn syntax parsing, we also support multiline REPL mode. This means that if you have an uncompleted code block and press Enter, we will automatically enter the multiline mode. The mode is indicated by the * character. This is particularly useful for declaring classes and other more complex constructs.

~$ dotnet script
> class Foo {
* public string Bar {get; set;}
* }
> var foo = new Foo();

REPL commands

Aside from the regular C# script code, you can invoke the following commands (directives) from within the REPL:

Command	Description
#load	Load a script into the REPL (same as #load usage in CSX)
#r	Load an assembly into the REPL (same as #r usage in CSX)
#reset	Reset the REPL back to initial state (without restarting it)
#cls	Clear the console screen without resetting the REPL state
#exit	Exits the REPL

Seeding REPL with a script

You can execute a CSX script and, at the end of it, drop yourself into the context of the REPL. This way, the REPL becomes "seeded" with your code - all the classes, methods or variables are available in the REPL context. This is achieved by running a script with an -i flag.

For example, given the following CSX script:

var msg = "Hello World";
Console.WriteLine(msg);

When you run this with the -i flag, Hello World is printed, REPL starts and msg variable is available in the REPL context.

~$ dotnet script foo.csx -i
Hello World
>

You can also seed the REPL from inside the REPL - at any point - by invoking a #load directive pointed at a specific file. For example:

~$ dotnet script
> #load "foo.csx"
Hello World
>

Piping

The following example shows how we can pipe data in and out of a script.

The UpperCase.csx script simply converts the standard input to upper case and writes it back out to standard output.

using (var streamReader = new StreamReader(Console.OpenStandardInput()))
{
    Write(streamReader.ReadToEnd().ToUpper());
}

We can now simply pipe the output from one command into our script like this.

echo "This is some text" | dotnet script UpperCase.csx
THIS IS SOME TEXT

Debugging

The first thing we need to do add the following to the launch.config file that allows VS Code to debug a running process.

{
    "name": ".NET Core Attach",
    "type": "coreclr",
    "request": "attach",
    "processId": "${command:pickProcess}"
}

To debug this script we need a way to attach the debugger in VS Code and the simplest thing we can do here is to wait for the debugger to attach by adding this method somewhere.

public static void WaitForDebugger()
{
    Console.WriteLine("Attach Debugger (VS Code)");
    while(!Debugger.IsAttached)
    {
    }
}

To debug the script when executing it from the command line we can do something like

WaitForDebugger();
using (var streamReader = new StreamReader(Console.OpenStandardInput()))
{
    Write(streamReader.ReadToEnd().ToUpper()); // <- SET BREAKPOINT HERE
}

Now when we run the script from the command line we will get

$ echo "This is some text" | dotnet script UpperCase.csx
Attach Debugger (VS Code)

This now gives us a chance to attach the debugger before stepping into the script and from VS Code, select the .NET Core Attach debugger and pick the process that represents the executing script.

Once that is done we should see our breakpoint being hit.

Configuration(Debug/Release)

By default, scripts will be compiled using the debug configuration. This is to ensure that we can debug a script in VS Code as well as attaching a debugger for long running scripts.

There are however situations where we might need to execute a script that is compiled with the release configuration. For instance, running benchmarks using BenchmarkDotNet is not possible unless the script is compiled with the release configuration.

We can specify this when executing the script.

dotnet script foo.csx -c release

 

Nullable reference types

Starting from version 0.50.0, dotnet-script supports .Net Core 3.0 and all the C# 8 features. The way we deal with nullable references types in dotnet-script is that we turn every warning related to nullable reference types into compiler errors. This means every warning between CS8600 and CS8655 are treated as an error when compiling the script.

Nullable references types are turned off by default and the way we enable it is using the #nullable enable compiler directive. This means that existing scripts will continue to work, but we can now opt-in on this new feature.

#!/usr/bin/env dotnet-script

#nullable enable

string name = null;

Trying to execute the script will result in the following error

main.csx(5,15): error CS8625: Cannot convert null literal to non-nullable reference type.

We will also see this when working with scripts in VS Code under the problems panel.

Download Details:
Author: filipw
Source Code: https://github.com/filipw/dotnet-script
License: MIT License

#dotnet  #aspdotnet  #csharp 

Software Testing 101: Regression Tests, Unit Tests, Integration Tests

Automation and segregation can help you build better software
If you write automated tests and deliver them to the customer, he can make sure the software is working properly. And, at the end of the day, he paid for it.

Ok. We can segregate or separate the tests according to some criteria. For example, “white box” tests are used to measure the internal quality of the software, in addition to the expected results. They are very useful to know the percentage of lines of code executed, the cyclomatic complexity and several other software metrics. Unit tests are white box tests.

#testing #software testing #regression tests #unit tests #integration tests

How to Do API Testing?

Nowadays API testing is an integral part of testing. There are a lot of tools like postman, insomnia, etc. There are many articles that ask what is API, What is API testing, but the problem is How to do API testing? What I need to validate.

Note: In this article, I am going to use postman assertions for all the examples since it is the most popular tool. But this article is not intended only for the postman tool.

Let’s directly jump to the topic.

Let’s consider you have an API endpoint example http://dzone.com/getuserDetails/{{username}} when you send the get request to that URL it returns the JSON response.

My API endpoint is http://dzone.com/getuserDetails/{{username}}

The response is in JSON format like below

JSON

{
  "jobTitle": "string",
  "userid": "string",
  "phoneNumber": "string",
  "password": "string",
  "email": "user@example.com",
  "firstName": "string",
  "lastName": "string",
  "userName": "string",
  "country": "string",
  "region": "string",
  "city": "string",
  "department": "string",
  "userType": 0
}

In the JSON we can see there are properties and associated values.

Now, For example, if we need details of the user with the username ‘ganeshhegde’ we need to send a **GET **request to **http://dzone.com/getuserDetails/ganeshhegde **

Now there are two scenarios.

1. Valid Usecase: User is available in the database and it returns user details with status code 200

2. Invalid Usecase: User is Unavailable/Invalid user in this case it returns status with code 404 with not found message.

#tutorial #performance #api #test automation #api testing #testing and qa #application programming interface #testing as a service #testing tutorial #api test