How to Call Any Existing AWS Lambda Function in the Future

aws-lambda-scheduler

aws-lambda-scheduler lets you call any existing AWS Lambda Function you have in the future.

This functionality is achieved by dynamically managing the EventBridge Rules.

aws-lambda-scheduler also has optimizations you can configure and extend yourself. AWS allows maximum of 300 EventBridge rules in a region. If you are expecting to create more than 300 rules, check out Optimizations section below.

Example Usage

When you set up the aws-lambda-scheduler in your AWS environment, you can simply call it with a json data like this:

{
    "datetime_utc": "2030-12-30 20:20:20",
    "lambda_function": "arn:aws:lambda:...........",
    "data": {
        "any": "json",
        "is": "allowed"
    }
}

aws-lambda-scheduler will create a EventBridge rule, and AWS will run the specified lambda_function at the datetime_utc with the given data.

It's that simple. Just remember to convert your datetime to UTC+0 timezone. That's the timezone supported by EventBridge Rules.

Installation

1. Create a IAM Role with AWS managed AmazonEventBridgeFullAccess and AWSLambdaBasicExecutionRole Roles.
2. Create a Lambda Function with Python runtime and attach the role you've created to it.
3. Upload the aws-lambda-scheduler.zip file to your Lambda Function.

How it works

EventBridge Rules are basically cron jobs of AWS. EventBridge Rules must have a schedule, data, and minimum of one target -- in this case the target is a lambda function.

Rules schedule can be fixed rate of minutes, or a cron job schedule expression. aws-lambda-scheduler takes advantage of cronjob schedule expression and creates a Rule that will run only one time.

what happens on runtime

1. aws-lambda-scheduler will create a EventBridge Rule with the date of datetime_utc, target of lambda_function and targets Constant Json Data being data.
2. aws-lambda-scheduler will delete the expired EventBridge Rules it previously created.

Basic Configuration

Environment Variable	Default Value	Description
RULE_PREFIX	AUTO_	EventBridge Rule names will be prefixed with this value. Please be careful to have this value constant from the start or expired rule deletion will not function properly as it depends on the prefixes.

Optimizations

aws-lambda-scheduler optimizations can be enabled if the specified lambda invocation times do not have to be punctual.

These optimizations lets you work around the maximum of 300 EventBridge Rules limitation. You can always request a quota increase for EventBridge Rules if these optimizations are not enough for your needs or if you need to be definitely punctual with your lambda calls.

Lets examine the EventBridge Rule limitations before diving into the optimization options.

About EventBridge Rules

EventBridge Rules has to have:

1. schedule expression (cronjob schedule expression)
2. target (lambda function)
3. json data to call the lambda with

• EventBridge lets you create maximum of 300 Rules per region.
• EventBridge lets you define maximum of 5 targets per Rule, and targets will be invoked concurrently.

Optimization Configuration Overview

Environment Variable	Default Value	Optimized Values
ALLOWED_T_MINUS_MINUTES	None	You specify. Setting this value to any integer will enable optimizations.
RULE_TARGET_ADDING_STRATEGY	CONCURRENT_LAMBDA_TARGETS	INPUT_CONCATENATOR
INPUT_CONCATENATOR_MODULE_NAME	input_concatenators	You specify.
INPUT_CONCATENATOR_CLASS_NAME	None	You have to extend a new class.

config: ALLOWED_T_MINUS_MINUTES

Environment variable ALLOWED_T_MINUS_MINUTES defaults to nothing. If you set it as an environment variable, optimizations are enabled for aws-lambda-scheduler.

Let's say you have called the aws-lambda-scheduler and created a rule.

Rule Name	Target	Data	Detail
AUTO_2030-12-30--20-20	test-lambda	{"data":"first-rule"}	Note: Rule names are consisted of RULE_PREFIX and datetime its going to run.

If you were to create another rule that would run 5 minutes after the previously created rule, without the optimizations enabled, aws-lambda-scheduler would create a new Rule for it.

Rule Name	Target	Data	Detail
AUTO_2030-12-30--20-20	test-lambda	{"data":"first-rule"}
AUTO_2030-12-30--20-25	test-lambda	{"data":"second-rule"}

When ALLOWED_T_MINUS_MINUTES is set to an integer, aws-lambda-scheduler will look for a Rule with its date just before ALLOWED_T_MINUS_MINUTES in minutes. If there is a rule close-by, it will just add a new target to the existing rule.

Lets say ALLOWED_T_MINUS_MINUTES is set to 6 and we are adding rules that are 5 minutes apart.

Rule Name	Target	Data	Detail
AUTO_2030-12-30--20-20	test-lambda	{"data":"first-rule"}	first rule is created
AUTO_2030-12-30--20-20	test-lambda	{"data":"second-rule"}	second rule is appended to first rule with a new target. It would've been AUTO_2030-12-30--20-25 if the optimizations weren't enabled.
AUTO_2030-12-30--20-30	test-lambda	{"data":"third-rule"}	There's 10 minutes of difference, so it's created as a new rule.

Great, we've reduced our number of Rules. But this solution creates another problem: what happens if there is more than 5 targets per rule?

Simply, aws-lambda-scheduler will raise an exception.

If you think you will have more than 5 targets per Rule, please continue with the other optimizations below.

Possible solution: We can combine the inputs of the same Lambda targets. This solution would require to implement two things:

1. a way to combine target lambdas json data (combining all the inputs of all targets)
2. Target lambda should be able to process combined data

Other optimizations can help us with these newly emerged problems. Lets continue.

config: RULE_TARGET_ADDING_STRATEGY

We know that we can't add more than 5 targets to a Rule.

Environment variable RULE_TARGET_ADDING_STRATEGY defaults to CONCURRENT_LAMBDA_TARGETS. With this configuration aws-lambda-scheduler will create more targets when we are appending an existing Rule.

Other possible value for RULE_TARGET_ADDING_STRATEGY is  INPUT_CONCATENATOR.

Setting up the INPUT_CONCATENATOR configuration basically lets you combine two different input json data together for the same lambda targets. And you can implement your logic of input concatenation by extending the input_concatenators.EventBridgeInputConcatenator abstract class.

You only have to implement the following function and set the environment variables accordingly.

def concatenate_inputs(self, existing_data, new_data):
    pass

There's also a ready-to-use implementation of the EventBridgeInputConcatenator called EventBridgeSingleArrayInput.

EventBridgeSingleArrayInput is developed to extend array inputs with the same keys of the json input. You can read more about how it works in the class comments.

Setting INPUT_CONCATENATOR value requires two other variables present in the environment variables: INPUT_CONCATENATOR_MODULE_NAME and INPUT_CONCATENATOR_CLASS_NAME.

Config	Detail	Values for below example
INPUT_CONCATENATOR_MODULE_NAME	filename of your implementation of the abstract class.	input_concatenators
INPUT_CONCATENATOR_CLASS_NAME	name of your implementation of abstact class	EventBridgeSingleArrayInput

Lets say we've added to rules for two different lambda targets for the same date.

Rule Name	Target	Data	Detail
AUTO_2030-12-30--20-20	test-lambda	{"data":"first-rule"}	first target is for test-lambda is created
AUTO_2030-12-30--20-20	other-test-lambda	{"data":"different-rule"}	first target for other-test-lambda is created

Lets add a new target for test-lambda with the same datetime_utc. The third target looks like this before creation:

Rule Name	Target	Data	Detail
AUTO_2030-12-30--20-20	test-lambda	{"data":"third-rule"}	we have our INPUT_CONCATENATOR optimization enabled, and we are about to add a new target to the same rule.

When we run aws-lambda-scheduler the rules get updated as this:

Rule Name	Target	Data	Detail
AUTO_2030-12-30--20-20	test-lambda	{"data":["first-rule", "third-rule"]}	EventBridgeSingleArrayInput made a list of the same keys available in the json input of the same target.
AUTO_2030-12-30--20-20	other-test-lambda	{"data":"different-rule"}	remains the same.

In summary, we wanted to add 3 targets for the same rule:

• different lambda targets registered as new target for the same rule
• same lambda targets got its data updated, and no new target or rule is created. Input combination logic is defined by the EventBridgeSingleArrayInput. You can implement your own class to count for different kinds of input concatenations for your needs.

 

Download Details:
 

Author: oguzhan-yilmaz
Download Link: Download The Source Code
Official Website: https://github.com/oguzhan-yilmaz/aws-lambda-scheduler 
License: CC0-1.0 License

 

What is GEEK

Buddha Community

A Collection Of Swift Tips & Tricks That I've Shared on Twitter

⚠️ This list is no longer being updated. For my latest Swift tips, checkout the "Tips" section on Swift by Sundell.

Swift tips & tricks ⚡️

One of the things I really love about Swift is how I keep finding interesting ways to use it in various situations, and when I do - I usually share them on Twitter. Here's a collection of all the tips & tricks that I've shared so far. Each entry has a link to the original tweet, if you want to respond with some feedback or question, which is always super welcome! 🚀

Also make sure to check out all of my other Swift content:

• 📖 My weekly articles, with a new post about Swift every Sunday!
• 🎧 My podcast which features special guests from around the community.
• 📬 My monthly newsletter - rounding up all of my content, including these tips, on the 1st of every month.

#102 Making async tests faster and more stable

🚀 Here are some quick tips to make async tests faster & more stable:

• 😴 Avoid sleep() - use expectations instead
• ⏱ Use generous timeouts to avoid flakiness on CI
• 🧐 Put all assertions at the end of each test, not inside closures

// BEFORE:

class MentionDetectorTests: XCTestCase {
    func testDetectingMention() {
        let detector = MentionDetector()
        let string = "This test was written by @johnsundell."

        detector.detectMentions(in: string) { mentions in
            XCTAssertEqual(mentions, ["johnsundell"])
        }
        
        sleep(2)
    }
}

// AFTER:

class MentionDetectorTests: XCTestCase {
    func testDetectingMention() {
        let detector = MentionDetector()
        let string = "This test was written by @johnsundell."

        var mentions: [String]?
        let expectation = self.expectation(description: #function)

        detector.detectMentions(in: string) {
            mentions = $0
            expectation.fulfill()
        }

        waitForExpectations(timeout: 10)
        XCTAssertEqual(mentions, ["johnsundell"])
    }
}

For more on async testing, check out "Unit testing asynchronous Swift code".

#101 Adding support for Apple Pencil double-taps

✍️ Adding support for the new Apple Pencil double-tap feature is super easy! All you have to do is to create a UIPencilInteraction, add it to a view, and implement one delegate method. Hopefully all pencil-compatible apps will soon adopt this.

let interaction = UIPencilInteraction()
interaction.delegate = self
view.addInteraction(interaction)

extension ViewController: UIPencilInteractionDelegate {
    func pencilInteractionDidTap(_ interaction: UIPencilInteraction) {
        // Handle pencil double-tap
    }
}

For more on using this and other iPad Pro features, check out "Building iPad Pro features in Swift".

#100 Combining values with functions

😎 Here's a cool function that combines a value with a function to return a closure that captures that value, so that it can be called without any arguments. Super useful when working with closure-based APIs and we want to use some of our properties without having to capture self.

func combine<A, B>(_ value: A, with closure: @escaping (A) -> B) -> () -> B {
    return { closure(value) }
}

// BEFORE:

class ProductViewController: UIViewController {
    override func viewDidLoad() {
        super.viewDidLoad()

        buyButton.handler = { [weak self] in
            guard let self = self else {
                return
            }
            
            self.productManager.startCheckout(for: self.product)
        }
    }
}

// AFTER:

class ProductViewController: UIViewController {
    override func viewDidLoad() {
        super.viewDidLoad()

        buyButton.handler = combine(product, with: productManager.startCheckout)
    }
}

#99 Dependency injection using functions

💉 When I'm only using a single function from a dependency, I love to inject that function as a closure, instead of having to create a protocol and inject the whole object. Makes dependency injection & testing super simple.

final class ArticleLoader {
    typealias Networking = (Endpoint) -> Future<Data>
    
    private let networking: Networking
    
    init(networking: @escaping Networking = URLSession.shared.load) {
        self.networking = networking
    }
    
    func loadLatest() -> Future<[Article]> {
        return networking(.latestArticles).decode()
    }
}

For more on this technique, check out "Simple Swift dependency injection with functions".

#98 Using a custom exception handler

💥 It's cool that you can easily assign a closure as a custom NSException handler. This is super useful when building things in Playgrounds - since you can't use breakpoints - so instead of just signal SIGABRT, you'll get the full exception description if something goes wrong.

NSSetUncaughtExceptionHandler { exception in
    print(exception)
}

#97 Using type aliases to give semantic meaning to primitives

❤️ I love that in Swift, we can use the type system to make our code so much more self-documenting - one way of doing so is to use type aliases to give the primitive types that we use a more semantic meaning.

extension List.Item {
    // Using type aliases, we can give semantic meaning to the
    // primitive types that we use, without having to introduce
    // wrapper types.
    typealias Index = Int
}

extension List {
    enum Mutation {
        // Our enum cases now become a lot more self-documenting,
        // without having to add additional parameter labels to
        // explain them.
        case add(Item, Item.Index)
        case update(Item, Item.Index)
        case remove(Item.Index)
    }
}

For more on self-documenting code, check out "Writing self-documenting Swift code".

#96 Specializing protocols using constraints

🤯 A little late night prototyping session reveals that protocol constraints can not only be applied to extensions - they can also be added to protocol definitions!

This is awesome, since it lets us easily define specialized protocols based on more generic ones.

protocol Component {
    associatedtype Container
    func add(to container: Container)
}

// Protocols that inherit from other protocols can include
// constraints to further specialize them.
protocol ViewComponent: Component where Container == UIView {
    associatedtype View: UIView
    var view: View { get }
}

extension ViewComponent {
    func add(to container: UIView) {
        container.addSubview(view)
    }
}

For more on specializing protocols, check out "Specializing protocols in Swift".

#95 Unwrapping an optional or throwing an error

📦 Here's a super handy extension on Swift's Optional type, which gives us a really nice API for easily unwrapping an optional, or throwing an error in case the value turned out to be nil:

extension Optional {
    func orThrow(_ errorExpression: @autoclosure () -> Error) throws -> Wrapped {
        switch self {
        case .some(let value):
            return value
        case .none:
            throw errorExpression()
        }
    }
}

let file = try loadFile(at: path).orThrow(MissingFileError())

For more ways that optionals can be extended, check out "Extending optionals in Swift".

#94 Testing code that uses static APIs

👩‍🔬 Testing code that uses static APIs can be really tricky, but there's a way that it can often be done - using Swift's first class function capabilities!

Instead of accessing that static API directly, we can inject the function we want to use, which enables us to mock it!

// BEFORE

class FriendsLoader {
    func loadFriends(then handler: @escaping (Result<[Friend]>) -> Void) {
        Networking.loadData(from: .friends) { result in
            ...
        }
    }
}

// AFTER

class FriendsLoader {
    typealias Handler<T> = (Result<T>) -> Void
    typealias DataLoadingFunction = (Endpoint, @escaping Handler<Data>) -> Void

    func loadFriends(using dataLoading: DataLoadingFunction = Networking.loadData,
                     then handler: @escaping Handler<[Friend]>) {
        dataLoading(.friends) { result in
            ...
        }
    }
}

// MOCKING IN TESTS

let dataLoading: FriendsLoader.DataLoadingFunction = { _, handler in
    handler(.success(mockData))
}

friendsLoader.loadFriends(using: dataLoading) { result in
    ...
}

#93 Matching multiple enum cases with associated values

🐾 Swift's pattern matching capabilities are so powerful! Two enum cases with associated values can even be matched and handled by the same switch case - which is super useful when handling state changes with similar data.

enum DownloadState {
    case inProgress(progress: Double)
    case paused(progress: Double)
    case cancelled
    case finished(Data)
}

func downloadStateDidChange(to state: DownloadState) {
    switch state {
    case .inProgress(let progress), .paused(let progress):
        updateProgressView(with: progress)
    case .cancelled:
        showCancelledMessage()
    case .finished(let data):
        process(data)
    }
}

#92 Multiline string literals

🅰 One really nice benefit of Swift multiline string literals - even for single lines of text - is that they don't require quotes to be escaped. Perfect when working with things like HTML, or creating a custom description for an object.

let html = highlighter.highlight("Array<String>")

XCTAssertEqual(html, """
<span class="type">Array</span>&lt;<span class="type">String</span>&gt;
""")

#91 Reducing sequences

💎 While it's very common in functional programming, the reduce function might be a bit of a hidden gem in Swift. It provides a super useful way to transform a sequence into a single value.

extension Sequence where Element: Equatable {
    func numberOfOccurrences(of target: Element) -> Int {
        return reduce(0) { result, element in
            guard element == target else {
                return result
            }

            return result + 1
        }
    }
}

You can read more about transforming collections in "Transforming collections in Swift".

#90 Avoiding manual Codable implementations

📦 When I use Codable in Swift, I want to avoid manual implementations as much as possible, even when there's a mismatch between my code structure and the JSON I'm decoding.

One way that can often be achieved is to use private data containers combined with computed properties.

struct User: Codable {
    let name: String
    let age: Int

    var homeTown: String { return originPlace.name }

    private let originPlace: Place
}

private extension User {
    struct Place: Codable {
        let name: String
    }
}

extension User {
    struct Container: Codable {
        let user: User
    }
}

#89 Using feature flags instead of feature branches

🚢 Instead of using feature branches, I merge almost all of my code directly into master - and then I use feature flags to conditionally enable features when they're ready. That way I can avoid merge conflicts and keep shipping!

extension ListViewController {
    func addSearchIfNeeded() {
        // Rather than having to keep maintaining a separate
        // feature branch for a new feature, we can use a flag
        // to conditionally turn it on.
        guard FeatureFlags.searchEnabled else {
            return
        }

        let resultsVC = SearchResultsViewController()
        let searchVC = UISearchController(
            searchResultsController: resultsVC
        )

        searchVC.searchResultsUpdater = resultsVC
        navigationItem.searchController = searchVC
    }
}

You can read more about feature flags in "Feature flags in Swift".

#88 Lightweight data hierarchies using tuples

💾 Here I'm using tuples to create a lightweight hierarchy for my data, giving me a nice structure without having to introduce any additional types.

struct CodeSegment {
    var tokens: (
        previous: String?,
        current: String
    )

    var delimiters: (
        previous: Character?
        next: Character?
    )
}

handle(segment.tokens.current)

You can read more about tuples in "Using tuples as lightweight types in Swift"

#87 The rule of threes

3️⃣ Whenever I have 3 properties or local variables that share the same prefix, I usually try to extract them into their own method or type. That way I can avoid massive types & methods, and also increase readability, without falling into a "premature optimization" trap.

Before

public func generate() throws {
    let contentFolder = try folder.subfolder(named: "content")

    let articleFolder = try contentFolder.subfolder(named: "posts")
    let articleProcessor = ContentProcessor(folder: articleFolder)
    let articles = try articleProcessor.process()

    ...
}

After

public func generate() throws {
    let contentFolder = try folder.subfolder(named: "content")
    let articles = try processArticles(in: contentFolder)
    ...
}

private func processArticles(in folder: Folder) throws -> [ContentItem] {
    let folder = try folder.subfolder(named: "posts")
    let processor = ContentProcessor(folder: folder)
    return try processor.process()
}

#86 Useful Codable extensions

👨‍🔧 Here's two extensions that I always add to the Encodable & Decodable protocols, which for me really make the Codable API nicer to use. By using type inference for decoding, a lot of boilerplate can be removed when the compiler is already able to infer the resulting type.

extension Encodable {
    func encoded() throws -> Data {
        return try JSONEncoder().encode(self)
    }
}

extension Data {
    func decoded<T: Decodable>() throws -> T {
        return try JSONDecoder().decode(T.self, from: self)
    }
}

let data = try user.encoded()

// By using a generic type in the decoded() method, the
// compiler can often infer the type we want to decode
// from the current context.
try userDidLogin(data.decoded())

// And if not, we can always supply the type, still making
// the call site read very nicely.
let otherUser = try data.decoded() as User

#85 Using shared UserDefaults suites

📦 UserDefaults is a lot more powerful than what it first might seem like. Not only can it store more complex values (like dates & dictionaries) and parse command line arguments - it also enables easy sharing of settings & lightweight data between apps in the same App Group.

let sharedDefaults = UserDefaults(suiteName: "my-app-group")!
let useDarkMode = sharedDefaults.bool(forKey: "dark-mode")

// This value is put into the shared suite.
sharedDefaults.set(true, forKey: "dark-mode")

// If you want to treat the shared settings as read-only (and add
// local overrides on top of them), you can simply add the shared
// suite to the standard UserDefaults.
let combinedDefaults = UserDefaults.standard
combinedDefaults.addSuite(named: "my-app-group")

// This value is a local override, not added to the shared suite.
combinedDefaults.set(true, forKey: "app-specific-override")

#84 Custom UIView backing layers

🎨 By overriding layerClass you can tell UIKit what CALayer class to use for a UIView's backing layer. That way you can reduce the amount of layers, and don't have to do any manual layout.

final class GradientView: UIView {
    override class var layerClass: AnyClass { return CAGradientLayer.self }

    var colors: (start: UIColor, end: UIColor)? {
        didSet { updateLayer() }
    }

    private func updateLayer() {
        let layer = self.layer as! CAGradientLayer
        layer.colors = colors.map { [$0.start.cgColor, $0.end.cgColor] }
    }
}

#83 Auto-Equatable enums with associated values

✅ That the compiler now automatically synthesizes Equatable conformances is such a huge upgrade for Swift! And the cool thing is that it works for all kinds of types - even for enums with associated values! Especially useful when using enums for verification in unit tests.

struct Article: Equatable {
    let title: String
    let text: String
}

struct User: Equatable {
    let name: String
    let age: Int
}

extension Navigator {
    enum Destination: Equatable {
        case profile(User)
        case article(Article)
    }
}

func testNavigatingToArticle() {
    let article = Article(title: "Title", text: "Text")
    controller.select(article)
    XCTAssertEqual(navigator.destinations, [.article(article)])
}

#82 Defaults for associated types

🤝 Associated types can have defaults in Swift - which is super useful for types that are not easily inferred (for example when they're not used for a specific instance method or property).

protocol Identifiable {
    associatedtype RawIdentifier: Codable = String

    var id: Identifier<Self> { get }
}

struct User: Identifiable {
    let id: Identifier<User>
    let name: String
}

struct Group: Identifiable {
    typealias RawIdentifier = Int

    let id: Identifier<Group>
    let name: String
}

#81 Creating a dedicated identifier type

🆔 If you want to avoid using plain strings as identifiers (which can increase both type safety & readability), it's really easy to create a custom Identifier type that feels just like a native Swift type, thanks to protocols!

More on this topic in "Type-safe identifiers in Swift".

struct Identifier: Hashable {
    let string: String
}

extension Identifier: ExpressibleByStringLiteral {
    init(stringLiteral value: String) {
        string = value
    }
}

extension Identifier: CustomStringConvertible {
    var description: String {
        return string
    }
}

extension Identifier: Codable {
    init(from decoder: Decoder) throws {
        let container = try decoder.singleValueContainer()
        string = try container.decode(String.self)
    }

    func encode(to encoder: Encoder) throws {
        var container = encoder.singleValueContainer()
        try container.encode(string)
    }
}

struct Article: Codable {
    let id: Identifier
    let title: String
}

let article = Article(id: "my-article", title: "Hello world!")

#80 Assigning optional tuple members to variables

🙌 A really cool thing about using tuples to model the internal state of a Swift type, is that you can unwrap an optional tuple's members directly into local variables.

Very useful in order to group multiple optional values together for easy unwrapping & handling.

class ImageTransformer {
    private var queue = [(image: UIImage, transform: Transform)]()

    private func processNext() {
        // When unwrapping an optional tuple, you can assign the members
        // directly to local variables.
        guard let (image, transform) = queue.first else {
            return
        }

        let context = Context()
        context.draw(image)
        context.apply(transform)
        ...
    }
}

#79 Struct convenience initializers

❤️ I love to structure my code using extensions in Swift. One big benefit of doing so when it comes to struct initializers, is that defining a convenience initializer doesn't remove the default one the compiler generates - best of both worlds!

struct Article {
    let date: Date
    var title: String
    var text: String
    var comments: [Comment]
}

extension Article {
    init(title: String, text: String) {
        self.init(date: Date(), title: title, text: text, comments: [])
    }
}

let articleA = Article(title: "Best Cupcake Recipe", text: "...")

let articleB = Article(
    date: Date(),
    title: "Best Cupcake Recipe",
    text: "...",
    comments: [
        Comment(user: currentUser, text: "Yep, can confirm!")
    ]
)

#78 Usages of throwing functions

🏈 A big benefit of using throwing functions for synchronous Swift APIs is that the caller can decide whether they want to treat the return value as optional (try?) or required (try).

func loadFile(named name: String) throws -> File {
    guard let url = urlForFile(named: name) else {
        throw File.Error.missing
    }

    do {
        let data = try Data(contentsOf: url)
        return File(url: url, data: data)
    } catch {
        throw File.Error.invalidData(error)
    }
}

let requiredFile = try loadFile(named: "AppConfig.json")

let optionalFile = try? loadFile(named: "UserSettings.json")

#77 Nested generic types

🐝 Types that are nested in generics automatically inherit their parent's generic types - which is super useful when defining accessory types (for things like states or outcomes).

struct Task<Input, Output> {
    typealias Closure = (Input) throws -> Output

    let closure: Closure
}

extension Task {
    enum Result {
        case success(Output)
        case failure(Error)
    }
}

#76 Equatable & Hashable structures

🤖 Now that the Swift compiler automatically synthesizes Equatable & Hashable conformances for value types, it's easier than ever to setup model structures with nested types that are all Equatable/Hashable!

typealias Value = Hashable & Codable

struct User: Value {
    var name: String
    var age: Int
    var lastLoginDate: Date?
    var settings: Settings
}

extension User {
    struct Settings: Value {
        var itemsPerPage: Int
        var theme: Theme
    }
}

extension User.Settings {
    enum Theme: String, Value {
        case light
        case dark
    }
}

You can read more about using nested types in Swift here.

#75 Conditional conformances

🎉 Swift 4.1 is here! One of the key features it brings is conditional conformances, which lets you have a type only conform to a protocol under certain constraints.

protocol UnboxTransformable {
    associatedtype RawValue

    static func transform(_ value: RawValue) throws -> Self?
}

extension Array: UnboxTransformable where Element: UnboxTransformable {
    typealias RawValue = [Element.RawValue]

    static func transform(_ value: RawValue) throws -> [Element]? {
        return try value.compactMap(Element.transform)
    }
}

I also have an article with lots of more info on conditional conformances here. Paul Hudson also has a great overview of all Swift 4.1 features here.

#74 Generic type aliases

🕵️‍♀️ A cool thing about Swift type aliases is that they can be generic! Combine that with tuples and you can easily define simple generic types.

typealias Pair<T> = (T, T)

extension Game {
    func calculateScore(for players: Pair<Player>) -> Int {
        ...
    }
}

You can read more about using tuples as lightweight types here.

#73 Parsing command line arguments using UserDefaults

☑️ A really cool "hidden" feature of UserDefaults is that it contains any arguments that were passed to the app at launch!

Super useful both in Swift command line tools & scripts, but also to temporarily override a value when debugging iOS apps.

let defaults = UserDefaults.standard
let query = defaults.string(forKey: "query")
let resultCount = defaults.integer(forKey: "results")

#72 Using the & operator

👏 Swift's & operator is awesome! Not only can you use it to compose protocols, you can compose other types too! Very useful if you want to hide concrete types & implementation details.

protocol LoadableFromURL {
    func load(from url: URL)
}

class ContentViewController: UIViewController, LoadableFromURL {
    func load(from url: URL) {
        ...
    }
}

class ViewControllerFactory {
    func makeContentViewController() -> UIViewController & LoadableFromURL {
        return ContentViewController()
    }
}

#71 Capturing multiple values in mocks

🤗 When capturing values in mocks, using an array (instead of just a single value) makes it easy to verify that only a certain number of values were passed.

Perfect for protecting against "over-calling" something.

class UserManagerTests: XCTestCase {
    func testObserversCalledWhenUserFirstLogsIn() {
        let manager = UserManager()

        let observer = ObserverMock()
        manager.addObserver(observer)

        // First login, observers should be notified
        let user = User(id: 123, name: "John")
        manager.userDidLogin(user)
        XCTAssertEqual(observer.users, [user])

        // If the same user logs in again, observers shouldn't be notified
        manager.userDidLogin(user)
        XCTAssertEqual(observer.users, [user])
    }
}

private extension UserManagerTests {
    class ObserverMock: UserManagerObserver {
        private(set) var users = [User]()

        func userDidChange(to user: User) {
            users.append(user)
        }
    }
}

#70 Reducing the need for mocks

👋 When writing tests, you don't always need to create mocks - you can create stubs using real instances of things like errors, URLs & UserDefaults.

Here's how to do that for some common tasks/object types in Swift:

// Create errors using NSError (#function can be used to reference the name of the test)
let error = NSError(domain: #function, code: 1, userInfo: nil)

// Create non-optional URLs using file paths
let url = URL(fileURLWithPath: "Some/URL")

// Reference the test bundle using Bundle(for:)
let bundle = Bundle(for: type(of: self))

// Create an explicit UserDefaults object (instead of having to use a mock)
let userDefaults = UserDefaults(suiteName: #function)

// Create queues to control/await concurrent operations
let queue = DispatchQueue(label: #function)

For when you actually do need mocking, check out "Mocking in Swift".

#69 Using "then" as an external parameter label for closures

⏱ I've started using "then" as an external parameter label for completion handlers. Makes the call site read really nicely (Because I do ❤️ conversational API design) regardless of whether trailing closure syntax is used or not.

protocol DataLoader {
    // Adding type aliases to protocols can be a great way to
    // reduce verbosity for parameter types.
    typealias Handler = (Result<Data>) -> Void
    associatedtype Endpoint

    func loadData(from endpoint: Endpoint, then handler: @escaping Handler)
}

loader.loadData(from: .messages) { result in
    ...
}

loader.loadData(from: .messages, then: { result in
    ...
})

#68 Combining lazily evaluated sequences with the builder pattern

😴 Combining lazily evaluated sequences with builder pattern-like properties can lead to some pretty sweet APIs for configurable sequences in Swift.

Also useful for queries & other things you "build up" and then execute.

// Extension adding builder pattern-like properties that return
// a new sequence value with the given configuration applied
extension FileSequence {
    var recursive: FileSequence {
        var sequence = self
        sequence.isRecursive = true
        return sequence
    }

    var includingHidden: FileSequence {
        var sequence = self
        sequence.includeHidden = true
        return sequence
    }
}

// BEFORE

let files = folder.makeFileSequence(recursive: true, includeHidden: true)

// AFTER

let files = folder.files.recursive.includingHidden

Want an intro to lazy sequences? Check out "Swift sequences: The art of being lazy".

#67 Faster & more stable UI tests

My top 3 tips for faster & more stable UI tests:

📱 Reset the app's state at the beginning of every test.

🆔 Use accessibility identifiers instead of UI strings.

⏱ Use expectations instead of waiting time.

func testOpeningArticle() {
    // Launch the app with an argument that tells it to reset its state
    let app = XCUIApplication()
    app.launchArguments.append("--uitesting")
    app.launch()
    
    // Check that the app is displaying an activity indicator
    let activityIndicator = app.activityIndicator.element
    XCTAssertTrue(activityIndicator.exists)
    
    // Wait for the loading indicator to disappear = content is ready
    expectation(for: NSPredicate(format: "exists == 0"),
                evaluatedWith: activityIndicator)
                
    // Use a generous timeout in case the network is slow
    waitForExpectations(timeout: 10)
    
    // Tap the cell for the first article
    app.tables.cells["Article.0"].tap()
    
    // Assert that a label with the accessibility identifier "Article.Title" exists
    let label = app.staticTexts["Article.Title"]
    XCTAssertTrue(label.exists)
}

#66 Accessing the clipboard from a Swift script

📋 It's super easy to access the contents of the clipboard from a Swift script. A big benefit of Swift scripting is being able to use Cocoa's powerful APIs for Mac apps.

import Cocoa

let clipboard = NSPasteboard.general.string(forType: .string)

#65 Using tuples for view state

🎯 Using Swift tuples for view state can be a super nice way to group multiple properties together and render them reactively using the layout system.

By using a tuple we don't have to either introduce a new type or make our view model-aware.

class TextView: UIView {
    var state: (title: String?, text: String?) {
        // By telling UIKit that our view needs layout and binding our
        // state in layoutSubviews, we can react to state changes without
        // doing unnecessary layout work.
        didSet { setNeedsLayout() }
    }

    private let titleLabel = UILabel()
    private let textLabel = UILabel()

    override func layoutSubviews() {
        super.layoutSubviews()

        titleLabel.text = state.title
        textLabel.text = state.text

        ...
    }
}

#64 Throwing tests and LocalizedError

⚾️ Swift tests can throw, which is super useful in order to avoid complicated logic or force unwrapping. By making errors conform to LocalizedError, you can also get a nice error message in Xcode if there's a failure.

class ImageCacheTests: XCTestCase {
    func testCachingAndLoadingImage() throws {
        let bundle = Bundle(for: type(of: self))
        let cache = ImageCache(bundle: bundle)
        
        // Bonus tip: You can easily load images from your test
        // bundle using this UIImage initializer
        let image = try require(UIImage(named: "sample", in: bundle, compatibleWith: nil))
        try cache.cache(image, forKey: "key")
        
        let cachedImage = try cache.image(forKey: "key")
        XCTAssertEqual(image, cachedImage)
    }
}

enum ImageCacheError {
    case emptyKey
    case dataConversionFailed
}

// When using throwing tests, making your errors conform to
// LocalizedError will render a much nicer error message in
// Xcode (per default only the error code is shown).
extension ImageCacheError: LocalizedError {
    var errorDescription: String? {
        switch self {
        case .emptyKey:
            return "An empty key was given"
        case .dataConversionFailed:
            return "Failed to convert the given image to Data"
        }
    }
}

For more information, and the implementation of the require method used above, check out "Avoiding force unwrapping in Swift unit tests".

#63 The difference between static and class properties

✍️ Unlike static properties, class properties can be overridden by subclasses (however, they can't be stored, only computed).

class TableViewCell: UITableViewCell {
    class var preferredHeight: CGFloat { return 60 }
}

class TallTableViewCell: TableViewCell {
    override class var preferredHeight: CGFloat { return 100 }
}

#62 Creating extensions with static factory methods

👨‍🎨 Creating extensions with static factory methods can be a great alternative to subclassing in Swift, especially for things like setting up UIViews, CALayers or other kinds of styling.

It also lets you remove a lot of styling & setup from your view controllers.

extension UILabel {
    static func makeForTitle() -> UILabel {
        let label = UILabel()
        label.font = .boldSystemFont(ofSize: 24)
        label.textColor = .darkGray
        label.adjustsFontSizeToFitWidth = true
        label.minimumScaleFactor = 0.75
        return label
    }

    static func makeForText() -> UILabel {
        let label = UILabel()
        label.font = .systemFont(ofSize: 16)
        label.textColor = .black
        label.numberOfLines = 0
        return label
    }
}

class ArticleViewController: UIViewController {
    lazy var titleLabel = UILabel.makeForTitle()
    lazy var textLabel = UILabel.makeForText()
}

#61 Child view controller auto-resizing

🧒 An awesome thing about child view controllers is that they're automatically resized to match their parent, making them a super nice solution for things like loading & error views.

class ListViewController: UIViewController {
    func loadItems() {
        let loadingViewController = LoadingViewController()
        add(loadingViewController)

        dataLoader.loadItems { [weak self] result in
            loadingViewController.remove()
            self?.handle(result)
        }
    }
}

For more about child view controller (including the add and remove methods used above), check out "Using child view controllers as plugins in Swift".

#60 Using zip

🤐 Using the zip function in Swift you can easily combine two sequences. Super useful when using two sequences to do some work, since zip takes care of all the bounds-checking.

func render(titles: [String]) {
    for (label, text) in zip(titleLabels, titles) {
        print(text)
        label.text = text
    }
}

#59 Defining custom option sets

🎛 The awesome thing about option sets in Swift is that they can automatically either be passed as a single member or as a set. Even cooler is that you can easily define your own option sets as well, perfect for options and other non-exclusive values.

// Option sets are awesome, because you can easily pass them
// both using dot syntax and array literal syntax, like when
// using the UIView animation API:
UIView.animate(withDuration: 0.3,
               delay: 0,
               options: .allowUserInteraction,
               animations: animations)

UIView.animate(withDuration: 0.3,
               delay: 0,
               options: [.allowUserInteraction, .layoutSubviews],
               animations: animations)

// The cool thing is that you can easily define your own option
// sets as well, by defining a struct that has an Int rawValue,
// that will be used as a bit mask.
extension Cache {
    struct Options: OptionSet {
        static let saveToDisk = Options(rawValue: 1)
        static let clearOnMemoryWarning = Options(rawValue: 1 << 1)
        static let clearDaily = Options(rawValue: 1 << 2)

        let rawValue: Int
    }
}

// We can now use Cache.Options just like UIViewAnimationOptions:
Cache(options: .saveToDisk)
Cache(options: [.saveToDisk, .clearDaily])

#58 Using the where clause with associated types

🙌 Using the where clause when designing protocol-oriented APIs in Swift can let your implementations (or others' if it's open source) have a lot more freedom, especially when it comes to collections.

See "Using generic type constraints in Swift 4" for more info.

public protocol PathFinderMap {
    associatedtype Node
    // Using the 'where' clause for associated types, we can
    // ensure that a type meets certain requirements (in this
    // case that it's a sequence with Node elements).
    associatedtype NodeSequence: Sequence where NodeSequence.Element == Node

    // Instead of using a concrete type (like [Node]) here, we
    // give implementors of this protocol more freedom while
    // still meeting our requirements. For example, one
    // implementation might use Set<Node>.
    func neighbors(of node: Node) -> NodeSequence
}

#57 Using first class functions when iterating over a dictionary

👨‍🍳 Combine first class functions in Swift with the fact that Dictionary elements are (Key, Value) tuples and you can build yourself some pretty awesome functional chains when iterating over a Dictionary.

func makeActor(at coordinate: Coordinate, for building: Building) -> Actor {
    let actor = Actor()
    actor.position = coordinate.point
    actor.animation = building.animation
    return actor
}

func render(_ buildings: [Coordinate : Building]) {
    buildings.map(makeActor).forEach(add)
}

#56 Calling instance methods as static functions

😎 In Swift, you can call any instance method as a static function and it will return a closure representing that method. This is how running tests using SPM on Linux works.

More about this topic in my blog post "First class functions in Swift".

// This produces a '() -> Void' closure which is a reference to the
// given view's 'removeFromSuperview' method.
let closure = UIView.removeFromSuperview(view)

// We can now call it just like we would any other closure, and it
// will run 'view.removeFromSuperview()'
closure()

// This is how running tests using the Swift Package Manager on Linux
// works, you return your test functions as closures:
extension UserManagerTests {
    static var allTests = [
        ("testLoggingIn", testLoggingIn),
        ("testLoggingOut", testLoggingOut),
        ("testUserPermissions", testUserPermissions)
    ]
}

#55 Dropping suffixes from method names to support multiple arguments

👏 One really nice benefit of dropping suffixes from method names (and just using verbs, when possible) is that it becomes super easy to support both single and multiple arguments, and it works really well semantically.

extension UIView {
    func add(_ subviews: UIView...) {
        subviews.forEach(addSubview)
    }
}

view.add(button)
view.add(label)

// By dropping the "Subview" suffix from the method name, both
// single and multiple arguments work really well semantically.
view.add(button, label)

#54 Constraining protocols to classes to ensure mutability

👽 Using the AnyObject (or class) constraint on protocols is not only useful when defining delegates (or other weak references), but also when you always want instances to be mutable without copying.

// By constraining a protocol with 'AnyObject' it can only be adopted
// by classes, which means all instances will always be mutable, and
// that it's the original instance (not a copy) that will be mutated.
protocol DataContainer: AnyObject {
    var data: Data? { get set }
}

class UserSettingsManager {
    private var settings: Settings
    private let dataContainer: DataContainer

    // Since DataContainer is a protocol, we an easily mock it in
    // tests if we use dependency injection
    init(settings: Settings, dataContainer: DataContainer) {
        self.settings = settings
        self.dataContainer = dataContainer
    }

    func saveSettings() throws {
        let data = try settings.serialize()

        // We can now assign properties on an instance of our protocol
        // because the compiler knows it's always going to be a class
        dataContainer.data = data
    }
}

#53 String-based enums in string interpolation

🍣 Even if you define a custom raw value for a string-based enum in Swift, the full case name will be used in string interpolation.

Super useful when using separate raw values for JSON, while still wanting to use the full case name in other contexts.

extension Building {
    // This enum has custom raw values that are used when decoding
    // a value, for example from JSON.
    enum Kind: String {
        case castle = "C"
        case town = "T"
        case barracks = "B"
        case goldMine = "G"
        case camp = "CA"
        case blacksmith = "BL"
    }

    var animation: Animation {
        return Animation(
            // When used in string interpolation, the full case name is still used.
            // For 'castle' this will be 'buildings/castle'.
            name: "buildings/\(kind)",
            frameCount: frameCount,
            frameDuration: frameDuration
        )
    }
}

#52 Expressively comparing a value with a list of candidates

👨‍🔬 Continuing to experiment with expressive ways of comparing a value with a list of candidates in Swift. Adding an extension on Equatable is probably my favorite approach so far.

extension Equatable {
    func isAny(of candidates: Self...) -> Bool {
        return candidates.contains(self)
    }
}

let isHorizontal = direction.isAny(of: .left, .right)

See tip #35 for my previous experiment.

#51 UIView bounds and transforms

📐 A really interesting side-effect of a UIView's bounds being its rect within its own coordinate system is that transforms don't affect it at all. That's why it's usually a better fit than frame when doing layout calculations of subviews.

let view = UIView()
view.frame.size = CGSize(width: 100, height: 100)
view.transform = CGAffineTransform(scaleX: 2, y: 2)

print(view.frame) // (-50.0, -50.0, 200.0, 200.0)
print(view.bounds) // (0.0, 0.0, 100.0, 100.0)

#50 UIKit default arguments

👏 It's awesome that many UIKit APIs with completion handlers and other optional parameters import into Swift with default arguments (even though they are written in Objective-C). Getting rid of all those nil arguments is so nice!

// BEFORE: All parameters are specified, just like in Objective-C

viewController.present(modalViewController, animated: true, completion: nil)

modalViewController.dismiss(animated: true, completion: nil)

viewController.transition(from: loadingViewController,
                          to: contentViewController,
                          duration: 0.3,
                          options: [],
                          animations: animations,
                          completion: nil)

// AFTER: Since many UIKit APIs with completion handlers and other
// optional parameters import into Swift with default arguments,
// we can make our calls shorter

viewController.present(modalViewController, animated: true)

modalViewController.dismiss(animated: true)

viewController.transition(from: loadingViewController,
                          to: contentViewController,
                          duration: 0.3,
                          animations: animations)

#49 Avoiding Massive View Controllers

✂️ Avoiding Massive View Controllers is all about finding the right levels of abstraction and splitting things up.

My personal rule of thumb is that as soon as I have 3 methods or properties that have the same prefix, I break them out into their own type.

// BEFORE

class LoginViewController: UIViewController {
    private lazy var signUpLabel = UILabel()
    private lazy var signUpImageView = UIImageView()
    private lazy var signUpButton = UIButton()
}

// AFTER

class LoginViewController: UIViewController {
    private lazy var signUpView = SignUpView()
}

class SignUpView: UIView {
    private lazy var label = UILabel()
    private lazy var imageView = UIImageView()
    private lazy var button = UIButton()
}

#48 Extending optionals

❤️ I love the fact that optionals are enums in Swift - it makes it so easy to extend them with convenience APIs for certain types. Especially useful when doing things like data validation on optional values.

func validateTextFields() -> Bool {
    guard !usernameTextField.text.isNilOrEmpty else {
        return false
    }

    ...

    return true
}

// Since all optionals are actual enum values in Swift, we can easily
// extend them for certain types, to add our own convenience APIs

extension Optional where Wrapped == String {
    var isNilOrEmpty: Bool {
        switch self {
        case let string?:
            return string.isEmpty
        case nil:
            return true
        }
    }
}

// Since strings are now Collections in Swift 4, you can even
// add this property to all optional collections:

extension Optional where Wrapped: Collection {
    var isNilOrEmpty: Bool {
        switch self {
        case let collection?:
            return collection.isEmpty
        case nil:
            return true
        }
    }
}

#47 Using where with for-loops

🗺 Using the where keyword can be a super nice way to quickly apply a filter in a for-loop in Swift. You can of course use map, filter and forEach, or guard, but for simple loops I think this is very expressive and nice.

func archiveMarkedPosts() {
    for post in posts where post.isMarked {
        archive(post)
    }
}

func healAllies() {
    for player in players where player.isAllied(to: currentPlayer) {
        player.heal()
    }
}

#46 Variable shadowing

👻 Variable shadowing can be super useful in Swift, especially when you want to create a local copy of a parameter value in order to use it as state within a closure.

init(repeatMode: RepeatMode, closure: @escaping () -> UpdateOutcome) {
    // Shadow the argument with a local, mutable copy
    var repeatMode = repeatMode
    
    self.closure = {
        // With shadowing, there's no risk of accidentially
        // referring to the immutable version
        switch repeatMode {
        case .forever:
            break
        case .times(let count):
            guard count > 0 else {
                return .finished
            }
            
            // We can now capture the mutable version and use
            // it for state in a closure
            repeatMode = .times(count - 1)
        }
        
        return closure()
    }
}

#45 Using dot syntax for static properties and initializers

✒️ Dot syntax is one of my favorite features of Swift. What's really cool is that it's not only for enums, any static method or property can be used with dot syntax - even initializers! Perfect for convenience APIs and default parameters.

public enum RepeatMode {
    case times(Int)
    case forever
}

public extension RepeatMode {
    static var never: RepeatMode {
        return .times(0)
    }

    static var once: RepeatMode {
        return .times(1)
    }
}

view.perform(animation, repeated: .once)

// To make default parameters more compact, you can even use init with dot syntax

class ImageLoader {
    init(cache: Cache = .init(), decoder: ImageDecoder = .init()) {
        ...
    }
}

#44 Calling functions as closures with a tuple as parameters

🚀 One really cool aspect of Swift having first class functions is that you can pass any function (or even initializer) as a closure, and even call it with a tuple containing its parameters!

// This function lets us treat any "normal" function or method as
// a closure and run it with a tuple that contains its parameters
func call<Input, Output>(_ function: (Input) -> Output, with input: Input) -> Output {
    return function(input)
}

class ViewFactory {
    func makeHeaderView() -> HeaderView {
        // We can now pass an initializer as a closure, and a tuple
        // containing its parameters
        return call(HeaderView.init, with: loadTextStyles())
    }
    
    private func loadTextStyles() -> (font: UIFont, color: UIColor) {
        return (theme.font, theme.textColor)
    }
}

class HeaderView {
    init(font: UIFont, textColor: UIColor) {
        ...
    }
}

#43 Enabling static dependency injection

💉 If you've been struggling to test code that uses static APIs, here's a technique you can use to enable static dependency injection without having to modify any call sites:

// Before: Almost impossible to test due to the use of singletons

class Analytics {
    static func log(_ event: Event) {
        Database.shared.save(event)
        
        let dictionary = event.serialize()
        NetworkManager.shared.post(dictionary, to: eventURL)
    }
}

// After: Much easier to test, since we can inject mocks as arguments

class Analytics {
    static func log(_ event: Event,
                    database: Database = .shared,
                    networkManager: NetworkManager = .shared) {
        database.save(event)
        
        let dictionary = event.serialize()
        networkManager.post(dictionary, to: eventURL)
    }
}

#42 Type inference for lazy properties in Swift 4

🎉 In Swift 4, type inference works for lazy properties and you don't need to explicitly refer to self!

// Swift 3

class PurchaseView: UIView {
    private lazy var buyButton: UIButton = self.makeBuyButton()
    
    private func makeBuyButton() -> UIButton {
        let button = UIButton()
        button.setTitle("Buy", for: .normal)
        button.setTitleColor(.blue, for: .normal)
        return button
    }
}

// Swift 4

class PurchaseView: UIView {
    private lazy var buyButton = makeBuyButton()
    
    private func makeBuyButton() -> UIButton {
        let button = UIButton()
        button.setTitle("Buy", for: .normal)
        button.setTitleColor(.blue, for: .normal)
        return button
    }
}

#41 Converting Swift errors to NSError

😎 You can turn any Swift Error into an NSError, which is super useful when pattern matching with a code 👍. Also, switching on optionals is pretty cool!

let task = urlSession.dataTask(with: url) { data, _, error in
    switch error {
    case .some(let error as NSError) where error.code == NSURLErrorNotConnectedToInternet:
        presenter.showOfflineView()
    case .some(let error):
        presenter.showGenericErrorView()
    case .none:
        presenter.renderContent(from: data)
    }
}

task.resume()

Also make sure to check out Kostas Kremizas' tip about how you can pattern match directly against a member of URLError.

#40 Making UIImage macOS compatible

🖥 Here's an easy way to make iOS model code that uses UIImage macOS compatible - like me and Gui Rambo discussed on the Swift by Sundell Podcast.

// Either put this in a separate file that you only include in your macOS target or wrap the code in #if os(macOS) / #endif

import Cocoa

// Step 1: Typealias UIImage to NSImage
typealias UIImage = NSImage

// Step 2: You might want to add these APIs that UIImage has but NSImage doesn't.
extension NSImage {
    var cgImage: CGImage? {
        var proposedRect = CGRect(origin: .zero, size: size)

        return cgImage(forProposedRect: &proposedRect,
                       context: nil,
                       hints: nil)
    }

    convenience init?(named name: String) {
        self.init(named: Name(name))
    }
}

// Step 3: Profit - you can now make your model code that uses UIImage cross-platform!
struct User {
    let name: String
    let profileImage: UIImage
}

#39 Internally mutable protocol-oriented APIs

🤖 You can easily define a protocol-oriented API that can only be mutated internally, by using an internal protocol that extends a public one.

// Declare a public protocol that acts as your immutable API
public protocol ModelHolder {
    associatedtype Model
    var model: Model { get }
}

// Declare an extended, internal protocol that provides a mutable API
internal protocol MutableModelHolder: ModelHolder {
    var model: Model { get set }
}

// You can now implement the requirements using 'public internal(set)'
public class UserHolder: MutableModelHolder {
    public internal(set) var model: User

    internal init(model: User) {
        self.model = model
    }
}

#38 Switching on a set

🎛 You can switch on a set using array literals as cases in Swift! Can be really useful to avoid many if/else if statements.

class RoadTile: Tile {
    var connectedDirections = Set<Direction>()

    func render() {
        switch connectedDirections {
        case [.up, .down]:
            image = UIImage(named: "road-vertical")
        case [.left, .right]:
            image = UIImage(named: "road-horizontal")
        default:
            image = UIImage(named: "road")
        }
    }
}

#37 Adding the current locale to cache keys

🌍 When caching localized content in an app, it's a good idea to add the current locale to all keys, to prevent bugs when switching languages.

func cache(_ content: Content, forKey key: String) throws {
    let data = try wrap(content) as Data
    let key = localize(key: key)
    try storage.store(data, forKey: key)
}

func loadCachedContent(forKey key: String) -> Content? {
    let key = localize(key: key)
    let data = storage.loadData(forKey: key)
    return data.flatMap { try? unbox(data: $0) }
}

private func localize(key: String) -> String {
    return key + "-" + Bundle.main.preferredLocalizations[0]
}

#36 Setting up tests to avoid retain cycles with weak references

🚳 Here's an easy way to setup a test to avoid accidental retain cycles with object relationships (like weak delegates & observers) in Swift:

func testDelegateNotRetained() {
    // Assign the delegate (weak) and also retain it using a local var
    var delegate: Delegate? = DelegateMock()
    controller.delegate = delegate
    XCTAssertNotNil(controller.delegate)
    
    // Release the local var, which should also release the weak reference
    delegate = nil
    XCTAssertNil(controller.delegate)
}

#35 Expressively matching a value against a list of candidates

👨‍🔬 Playing around with an expressive way to check if a value matches any of a list of candidates in Swift:

// Instead of multiple conditions like this:

if string == "One" || string == "Two" || string == "Three" {

}

// You can now do:

if string == any(of: "One", "Two", "Three") {

}

You can find a gist with the implementation here.

#34 Organizing code using extensions

👪 APIs in a Swift extension automatically inherit its access control level, making it a neat way to organize public, internal & private APIs.

public extension Animation {
    init(textureNamed textureName: String) {
        frames = [Texture(name: textureName)]
    }
    
    init(texturesNamed textureNames: [String], frameDuration: TimeInterval = 1) {
        frames = textureNames.map(Texture.init)
        self.frameDuration = frameDuration
    }
    
    init(image: Image) {
        frames = [Texture(image: image)]
    }
}

internal extension Animation {
    func loadFrameImages() -> [Image] {
        return frames.map { $0.loadImageIfNeeded() }
    }
}

#33 Using map to transform an optional into a Result type

🗺 Using map you can transform an optional value into an optional Result type by simply passing in the enum case.

enum Result<Value> {
    case value(Value)
    case error(Error)
}

class Promise<Value> {
    private var result: Result<Value>?
    
    init(value: Value? = nil) {
        result = value.map(Result.value)
    }
}

#32 Assigning to self in struct initializers

👌 It's so nice that you can assign directly to self in struct initializers in Swift. Very useful when adding conformance to protocols.

extension Bool: AnswerConvertible {
    public init(input: String) throws {
        switch input.lowercased() {
        case "y", "yes", "👍":
            self = true
        default:
            self = false
        }
    }
}

#31 Recursively calling closures as inline functions

☎️ Defining Swift closures as inline functions enables you to recursively call them, which is super useful in things like custom sequences.

class Database {
    func records(matching query: Query) -> AnySequence<Record> {
        var recordIterator = loadRecords().makeIterator()
        
        func iterate() -> Record? {
            guard let nextRecord = recordIterator.next() else {
                return nil
            }
            
            guard nextRecord.matches(query) else {
                // Since the closure is an inline function, it can be recursively called,
                // in this case in order to advance to the next item.
                return iterate()
            }
            
            return nextRecord
        }
        
        // AnySequence/AnyIterator are part of the standard library and provide an easy way
        // to define custom sequences using closures.
        return AnySequence { AnyIterator(iterate) }
    }
}

Rob Napier points out that using the above might cause crashes if used on a large databaset, since Swift has no guaranteed Tail Call Optimization (TCO).

Slava Pestov also points out that another benefit of inline functions vs closures is that they can have their own generic parameter list.

#30 Passing self to required Objective-C dependencies

🏖 Using lazy properties in Swift, you can pass self to required Objective-C dependencies without having to use force-unwrapped optionals.

class DataLoader: NSObject {
    lazy var urlSession: URLSession = self.makeURLSession()
    
    private func makeURLSession() -> URLSession {
        return URLSession(configuration: .default, delegate: self, delegateQueue: .main)
    }
}

class Renderer {
    lazy var displayLink: CADisplayLink = self.makeDisplayLink()
    
    private func makeDisplayLink() -> CADisplayLink {
        return CADisplayLink(target: self, selector: #selector(screenDidRefresh))
    }
}

#29 Making weak or lazy properties readonly

👓 If you have a property in Swift that needs to be weak or lazy, you can still make it readonly by using private(set).

class Node {
    private(set) weak var parent: Node?
    private(set) lazy var children = [Node]()

    func add(child: Node) {
        children.append(child)
        child.parent = self
    }
}

#28 Defining static URLs using string literals

🌏 Tired of using URL(string: "url")! for static URLs? Make URL conform to ExpressibleByStringLiteral and you can now simply use "url" instead.

extension URL: ExpressibleByStringLiteral {
    // By using 'StaticString' we disable string interpolation, for safety
    public init(stringLiteral value: StaticString) {
        self = URL(string: "\(value)").require(hint: "Invalid URL string literal: \(value)")
    }
}

// We can now define URLs using static string literals 🎉
let url: URL = "https://www.swiftbysundell.com"
let task = URLSession.shared.dataTask(with: "https://www.swiftbysundell.com")

// In Swift 3 or earlier, you also have to implement 2 additional initializers
extension URL {
    public init(extendedGraphemeClusterLiteral value: StaticString) {
        self.init(stringLiteral: value)
    }

    public init(unicodeScalarLiteral value: StaticString) {
        self.init(stringLiteral: value)
    }
}

To find the extension that adds the require() method on Optional that I use above, check out Require.

#27 Manipulating points, sizes and frames using math operators

✚ I'm always careful with operator overloading, but for manipulating things like sizes, points & frames I find them super useful.

extension CGSize {
    static func *(lhs: CGSize, rhs: CGFloat) -> CGSize {
        return CGSize(width: lhs.width * rhs, height: lhs.height * rhs)
    }
}

button.frame.size = image.size * 2

If you like the above idea, check out CGOperators, which contains math operator overloads for all Core Graphics' vector types.

#26 Using closure types in generic constraints

🔗 You can use closure types in generic constraints in Swift. Enables nice APIs for handling sequences of closures.

extension Sequence where Element == () -> Void {
    func callAll() {
        forEach { $0() }
    }
}

extension Sequence where Element == () -> String {
    func joinedResults(separator: String) -> String {
        return map { $0() }.joined(separator: separator)
    }
}

callbacks.callAll()
let names = nameProviders.joinedResults(separator: ", ")

(If you're using Swift 3, you have to change Element to Iterator.Element)

#25 Using associated enum values to avoid state-specific optionals

🎉 Using associated enum values is a super nice way to encapsulate mutually exclusive state info (and avoiding state-specific optionals).

// BEFORE: Lots of state-specific, optional properties

class Player {
    var isWaitingForMatchMaking: Bool
    var invitingUser: User?
    var numberOfLives: Int
    var playerDefeatedBy: Player?
    var roundDefeatedIn: Int?
}

// AFTER: All state-specific information is encapsulated in enum cases

class Player {
    enum State {
        case waitingForMatchMaking
        case waitingForInviteResponse(from: User)
        case active(numberOfLives: Int)
        case defeated(by: Player, roundNumber: Int)
    }
    
    var state: State
}

#24 Using enums for async result types

👍 I really like using enums for all async result types, even boolean ones. Self-documenting, and makes the call site a lot nicer to read too!

protocol PushNotificationService {
    // Before
    func enablePushNotifications(completionHandler: @escaping (Bool) -> Void)
    
    // After
    func enablePushNotifications(completionHandler: @escaping (PushNotificationStatus) -> Void)
}

enum PushNotificationStatus {
    case enabled
    case disabled
}

service.enablePushNotifications { status in
    if status == .enabled {
        enableNotificationsButton.removeFromSuperview()
    }
}

#23 Working on async code in a playground

🏃 Want to work on your async code in a Swift Playground? Just set needsIndefiniteExecution to true to keep it running:

import PlaygroundSupport

PlaygroundPage.current.needsIndefiniteExecution = true

DispatchQueue.main.asyncAfter(deadline: .now() + 3) {
    let greeting = "Hello after 3 seconds"
    print(greeting)
}

To stop the playground from executing, simply call PlaygroundPage.current.finishExecution().

#22 Overriding self with a weak reference

💦 Avoid memory leaks when accidentially refering to self in closures by overriding it locally with a weak reference:

Swift >= 4.2

dataLoader.loadData(from: url) { [weak self] result in
    guard let self = self else { 
        return 
    }

    self.cache(result)
    
    ...

Swift < 4.2

dataLoader.loadData(from: url) { [weak self] result in
    guard let `self` = self else {
        return
    }

    self.cache(result)
    
    ...

Note that the reason the above currently works is because of a compiler bug (which I hope gets turned into a properly supported feature soon).

#21 Using DispatchWorkItem

🕓 Using dispatch work items you can easily cancel a delayed asynchronous GCD task if you no longer need it:

let workItem = DispatchWorkItem {
    // Your async code goes in here
}

// Execute the work item after 1 second
DispatchQueue.main.asyncAfter(deadline: .now() + 1, execute: workItem)

// You can cancel the work item if you no longer need it
workItem.cancel()

#20 Combining a sequence of functions

➕ While working on a new Swift developer tool (to be open sourced soon 😉), I came up with a pretty neat way of organizing its sequence of operations, by combining their functions into a closure:

internal func +<A, B, C>(lhs: @escaping (A) throws -> B,
                         rhs: @escaping (B) throws -> C) -> (A) throws -> C {
    return { try rhs(lhs($0)) }
}

public func run() throws {
    try (determineTarget + build + analyze + output)()
}

If you're familiar with the functional programming world, you might know the above technique as the pipe operator (thanks to Alexey Demedreckiy for pointing this out!)

#19 Chaining optionals with map() and flatMap()

🗺 Using map() and flatMap() on optionals you can chain multiple operations without having to use lengthy if lets or guards:

// BEFORE

guard let string = argument(at: 1) else {
    return
}

guard let url = URL(string: string) else {
    return
}

handle(url)

// AFTER

argument(at: 1).flatMap(URL.init).map(handle)

#18 Using self-executing closures for lazy properties

🚀 Using self-executing closures is a great way to encapsulate lazy property initialization:

class StoreViewController: UIViewController {
    private lazy var collectionView: UICollectionView = {
        let layout = UICollectionViewFlowLayout()
        let view = UICollectionView(frame: self.view.bounds, collectionViewLayout: layout)
        view.delegate = self
        view.dataSource = self
        return view
    }()
    
    override func viewDidLoad() {
        super.viewDidLoad()
        view.addSubview(collectionView)
    }
}

#17 Speeding up Swift package tests

⚡️ You can speed up your Swift package tests using the --parallel flag. For Marathon, the tests execute 3 times faster that way!

swift test --parallel

#16 Avoiding mocking UserDefaults

🛠 Struggling with mocking UserDefaults in a test? The good news is: you don't need mocking - just create a real instance:

class LoginTests: XCTestCase {
    private var userDefaults: UserDefaults!
    private var manager: LoginManager!
    
    override func setUp() {
        super.setup()
        
        userDefaults = UserDefaults(suiteName: #file)
        userDefaults.removePersistentDomain(forName: #file)
        
        manager = LoginManager(userDefaults: userDefaults)
    }
}

#15 Using variadic parameters

👍 Using variadic parameters in Swift, you can create some really nice APIs that take a list of objects without having to use an array:

extension Canvas {
    func add(_ shapes: Shape...) {
        shapes.forEach(add)
    }
}

let circle = Circle(center: CGPoint(x: 5, y: 5), radius: 5)
let lineA = Line(start: .zero, end: CGPoint(x: 10, y: 10))
let lineB = Line(start: CGPoint(x: 0, y: 10), end: CGPoint(x: 10, y: 0))

let canvas = Canvas()
canvas.add(circle, lineA, lineB)
canvas.render()

#14 Referring to enum cases with associated values as closures

😮 Just like you can refer to a Swift function as a closure, you can do the same thing with enum cases with associated values:

enum UnboxPath {
    case key(String)
    case keyPath(String)
}

struct UserSchema {
    static let name = key("name")
    static let age = key("age")
    static let posts = key("posts")
    
    private static let key = UnboxPath.key
}

#13 Using the === operator to compare objects by instance

📈 The === operator lets you check if two objects are the same instance. Very useful when verifying that an array contains an instance in a test:

protocol InstanceEquatable: class, Equatable {}

extension InstanceEquatable {
    static func ==(lhs: Self, rhs: Self) -> Bool {
        return lhs === rhs
    }
}

extension Enemy: InstanceEquatable {}

func testDestroyingEnemy() {
    player.attack(enemy)
    XCTAssertTrue(player.destroyedEnemies.contains(enemy))
}

#12 Calling initializers with dot syntax and passing them as closures

😎 Cool thing about Swift initializers: you can call them using dot syntax and pass them as closures! Perfect for mocking dates in tests.

class Logger {
    private let storage: LogStorage
    private let dateProvider: () -> Date
    
    init(storage: LogStorage = .init(), dateProvider: @escaping () -> Date = Date.init) {
        self.storage = storage
        self.dateProvider = dateProvider
    }
    
    func log(event: Event) {
        storage.store(event: event, date: dateProvider())
    }
}

#11 Structuring UI tests as extensions on XCUIApplication

📱 Most of my UI testing logic is now categories on XCUIApplication. Makes the test cases really easy to read:

func testLoggingInAndOut() {
    XCTAssertFalse(app.userIsLoggedIn)
    
    app.launch()
    app.login()
    XCTAssertTrue(app.userIsLoggedIn)
    
    app.logout()
    XCTAssertFalse(app.userIsLoggedIn)
}

func testDisplayingCategories() {
    XCTAssertFalse(app.isDisplayingCategories)
    
    app.launch()
    app.login()
    app.goToCategories()
    XCTAssertTrue(app.isDisplayingCategories)
}

#10 Avoiding default cases in switch statements

🙂 It’s a good idea to avoid “default” cases when switching on Swift enums - it’ll “force you” to update your logic when a new case is added:

enum State {
    case loggedIn
    case loggedOut
    case onboarding
}

func handle(_ state: State) {
    switch state {
    case .loggedIn:
        showMainUI()
    case .loggedOut:
        showLoginUI()
    // Compiler error: Switch must be exhaustive
    }
}

#9 Using the guard statement in many different scopes

💂 It's really cool that you can use Swift's 'guard' statement to exit out of pretty much any scope, not only return from functions:

// You can use the 'guard' statement to...

for string in strings {
    // ...continue an iteration
    guard shouldProcess(string) else {
        continue
    }
    
    // ...or break it
    guard !shouldBreak(for: string) else {
        break
    }
    
    // ...or return
    guard !shouldReturn(for: string) else {
        return
    }
    
    // ..or throw an error
    guard string.isValid else {
        throw StringError.invalid(string)
    }
    
    // ...or exit the program
    guard !shouldExit(for: string) else {
        exit(1)
    }
}

#8 Passing functions & operators as closures

❤️ Love how you can pass functions & operators as closures in Swift. For example, it makes the syntax for sorting arrays really nice!

let array = [3, 9, 1, 4, 6, 2]
let sorted = array.sorted(by: <)

#7 Using #function for UserDefaults key consistency

🗝 Here's a neat little trick I use to get UserDefault key consistency in Swift (#function expands to the property name in getters/setters). Just remember to write a good suite of tests that'll guard you against bugs when changing property names.

extension UserDefaults {
    var onboardingCompleted: Bool {
        get { return bool(forKey: #function) }
        set { set(newValue, forKey: #function) }
    }
}

#6 Using a name already taken by the standard library

📛 Want to use a name already taken by the standard library for a nested type? No problem - just use Swift. to disambiguate:

extension Command {
    enum Error: Swift.Error {
        case missing
        case invalid(String)
    }
}

#5 Using Wrap to implement Equatable

📦 Playing around with using Wrap to implement Equatable for any type, primarily for testing:

protocol AutoEquatable: Equatable {}

extension AutoEquatable {
    static func ==(lhs: Self, rhs: Self) -> Bool {
        let lhsData = try! wrap(lhs) as Data
        let rhsData = try! wrap(rhs) as Data
        return lhsData == rhsData
    }
}

#4 Using typealiases to reduce the length of method signatures

📏 One thing that I find really useful in Swift is to use typealiases to reduce the length of method signatures in generic types:

public class PathFinder<Object: PathFinderObject> {
    public typealias Map = Object.Map
    public typealias Node = Map.Node
    public typealias Path = PathFinderPath<Object>
    
    public static func possiblePaths(for object: Object, at rootNode: Node, on map: Map) -> Path.Sequence {
        return .init(object: object, rootNode: rootNode, map: map)
    }
}

#3 Referencing either external or internal parameter name when writing docs

📖 You can reference either the external or internal parameter label when writing Swift docs - and they get parsed the same:

// EITHER:

class Foo {
    /**
    *   - parameter string: A string
    */
    func bar(with string: String) {}
}

// OR:

class Foo {
    /**
    *   - parameter with: A string
    */
    func bar(with string: String) {}
}

#2 Using auto closures

👍 Finding more and more uses for auto closures in Swift. Can enable some pretty nice APIs:

extension Dictionary {
    mutating func value(for key: Key, orAdd valueClosure: @autoclosure () -> Value) -> Value {
        if let value = self[key] {
            return value
        }
        
        let value = valueClosure()
        self[key] = value
        return value
    }
}

#1 Namespacing with nested types

🚀 I’ve started to become a really big fan of nested types in Swift. Love the additional namespacing it gives you!

public struct Map {
    public struct Model {
        public let size: Size
        public let theme: Theme
        public var terrain: [Position : Terrain.Model]
        public var units: [Position : Unit.Model]
        public var buildings: [Position : Building.Model]
    }
    
    public enum Direction {
        case up
        case right
        case down
        case left
    }
    
    public struct Position {
        public var x: Int
        public var y: Int
    }
    
    public enum Size: String {
        case small = "S"
        case medium = "M"
        case large = "L"
        case extraLarge = "XL"
    }
}

---

Download Details:

Author: JohnSundell
Source code: https://github.com/JohnSundell/SwiftTips

License: MIT license
#swift 

A Collection Of Swift Tips & Tricks That I've Shared on Twitter

Swift tips & tricks ⚡️

One of the things I really love about Swift is how I keep finding interesting ways to use it in various situations, and when I do - I usually share them on Twitter. Here's a collection of all the tips & tricks that I've shared so far. Each entry has a link to the original tweet, if you want to respond with some feedback or question, which is always super welcome! 🚀

⚠️ This list is no longer being updated. For my latest Swift tips, checkout the "Tips" section on Swift by Sundell.

Also make sure to check out all of my other Swift content:

• 📖 My weekly articles, with a new post about Swift every Sunday!
• 🎧 My podcast which features special guests from around the community.
• 📬 My monthly newsletter - rounding up all of my content, including these tips, on the 1st of every month.

102 Making async tests faster and more stable

🚀 Here are some quick tips to make async tests faster & more stable:

• 😴 Avoid sleep() - use expectations instead
• ⏱ Use generous timeouts to avoid flakiness on CI
• 🧐 Put all assertions at the end of each test, not inside closures

// BEFORE:

class MentionDetectorTests: XCTestCase {
    func testDetectingMention() {
        let detector = MentionDetector()
        let string = "This test was written by @johnsundell."

        detector.detectMentions(in: string) { mentions in
            XCTAssertEqual(mentions, ["johnsundell"])
        }
        
        sleep(2)
    }
}

// AFTER:

class MentionDetectorTests: XCTestCase {
    func testDetectingMention() {
        let detector = MentionDetector()
        let string = "This test was written by @johnsundell."

        var mentions: [String]?
        let expectation = self.expectation(description: #function)

        detector.detectMentions(in: string) {
            mentions = $0
            expectation.fulfill()
        }

        waitForExpectations(timeout: 10)
        XCTAssertEqual(mentions, ["johnsundell"])
    }
}

For more on async testing, check out "Unit testing asynchronous Swift code".

101 Adding support for Apple Pencil double-taps

✍️ Adding support for the new Apple Pencil double-tap feature is super easy! All you have to do is to create a UIPencilInteraction, add it to a view, and implement one delegate method. Hopefully all pencil-compatible apps will soon adopt this.

let interaction = UIPencilInteraction()
interaction.delegate = self
view.addInteraction(interaction)

extension ViewController: UIPencilInteractionDelegate {
    func pencilInteractionDidTap(_ interaction: UIPencilInteraction) {
        // Handle pencil double-tap
    }
}

For more on using this and other iPad Pro features, check out "Building iPad Pro features in Swift".

100 Combining values with functions

😎 Here's a cool function that combines a value with a function to return a closure that captures that value, so that it can be called without any arguments. Super useful when working with closure-based APIs and we want to use some of our properties without having to capture self.

func combine<A, B>(_ value: A, with closure: @escaping (A) -> B) -> () -> B {
    return { closure(value) }
}

// BEFORE:

class ProductViewController: UIViewController {
    override func viewDidLoad() {
        super.viewDidLoad()

        buyButton.handler = { [weak self] in
            guard let self = self else {
                return
            }
            
            self.productManager.startCheckout(for: self.product)
        }
    }
}

// AFTER:

class ProductViewController: UIViewController {
    override func viewDidLoad() {
        super.viewDidLoad()

        buyButton.handler = combine(product, with: productManager.startCheckout)
    }
}

99 Dependency injection using functions

💉 When I'm only using a single function from a dependency, I love to inject that function as a closure, instead of having to create a protocol and inject the whole object. Makes dependency injection & testing super simple.

final class ArticleLoader {
    typealias Networking = (Endpoint) -> Future<Data>
    
    private let networking: Networking
    
    init(networking: @escaping Networking = URLSession.shared.load) {
        self.networking = networking
    }
    
    func loadLatest() -> Future<[Article]> {
        return networking(.latestArticles).decode()
    }
}

For more on this technique, check out "Simple Swift dependency injection with functions".

98 Using a custom exception handler

💥 It's cool that you can easily assign a closure as a custom NSException handler. This is super useful when building things in Playgrounds - since you can't use breakpoints - so instead of just signal SIGABRT, you'll get the full exception description if something goes wrong.

NSSetUncaughtExceptionHandler { exception in
    print(exception)
}

97 Using type aliases to give semantic meaning to primitives

❤️ I love that in Swift, we can use the type system to make our code so much more self-documenting - one way of doing so is to use type aliases to give the primitive types that we use a more semantic meaning.

extension List.Item {
    // Using type aliases, we can give semantic meaning to the
    // primitive types that we use, without having to introduce
    // wrapper types.
    typealias Index = Int
}

extension List {
    enum Mutation {
        // Our enum cases now become a lot more self-documenting,
        // without having to add additional parameter labels to
        // explain them.
        case add(Item, Item.Index)
        case update(Item, Item.Index)
        case remove(Item.Index)
    }
}

For more on self-documenting code, check out "Writing self-documenting Swift code".

96 Specializing protocols using constraints

🤯 A little late night prototyping session reveals that protocol constraints can not only be applied to extensions - they can also be added to protocol definitions!

This is awesome, since it lets us easily define specialized protocols based on more generic ones.

protocol Component {
    associatedtype Container
    func add(to container: Container)
}

// Protocols that inherit from other protocols can include
// constraints to further specialize them.
protocol ViewComponent: Component where Container == UIView {
    associatedtype View: UIView
    var view: View { get }
}

extension ViewComponent {
    func add(to container: UIView) {
        container.addSubview(view)
    }
}

For more on specializing protocols, check out "Specializing protocols in Swift".

95 Unwrapping an optional or throwing an error

📦 Here's a super handy extension on Swift's Optional type, which gives us a really nice API for easily unwrapping an optional, or throwing an error in case the value turned out to be nil:

extension Optional {
    func orThrow(_ errorExpression: @autoclosure () -> Error) throws -> Wrapped {
        switch self {
        case .some(let value):
            return value
        case .none:
            throw errorExpression()
        }
    }
}

let file = try loadFile(at: path).orThrow(MissingFileError())

For more ways that optionals can be extended, check out "Extending optionals in Swift".

94 Testing code that uses static APIs

👩‍🔬 Testing code that uses static APIs can be really tricky, but there's a way that it can often be done - using Swift's first class function capabilities!

Instead of accessing that static API directly, we can inject the function we want to use, which enables us to mock it!

// BEFORE

class FriendsLoader {
    func loadFriends(then handler: @escaping (Result<[Friend]>) -> Void) {
        Networking.loadData(from: .friends) { result in
            ...
        }
    }
}

// AFTER

class FriendsLoader {
    typealias Handler<T> = (Result<T>) -> Void
    typealias DataLoadingFunction = (Endpoint, @escaping Handler<Data>) -> Void

    func loadFriends(using dataLoading: DataLoadingFunction = Networking.loadData,
                     then handler: @escaping Handler<[Friend]>) {
        dataLoading(.friends) { result in
            ...
        }
    }
}

// MOCKING IN TESTS

let dataLoading: FriendsLoader.DataLoadingFunction = { _, handler in
    handler(.success(mockData))
}

friendsLoader.loadFriends(using: dataLoading) { result in
    ...
}

93 Matching multiple enum cases with associated values

🐾 Swift's pattern matching capabilities are so powerful! Two enum cases with associated values can even be matched and handled by the same switch case - which is super useful when handling state changes with similar data.

enum DownloadState {
    case inProgress(progress: Double)
    case paused(progress: Double)
    case cancelled
    case finished(Data)
}

func downloadStateDidChange(to state: DownloadState) {
    switch state {
    case .inProgress(let progress), .paused(let progress):
        updateProgressView(with: progress)
    case .cancelled:
        showCancelledMessage()
    case .finished(let data):
        process(data)
    }
}

92 Multiline string literals

🅰 One really nice benefit of Swift multiline string literals - even for single lines of text - is that they don't require quotes to be escaped. Perfect when working with things like HTML, or creating a custom description for an object.

let html = highlighter.highlight("Array<String>")

XCTAssertEqual(html, """
<span class="type">Array</span>&lt;<span class="type">String</span>&gt;
""")

91 Reducing sequences

💎 While it's very common in functional programming, the reduce function might be a bit of a hidden gem in Swift. It provides a super useful way to transform a sequence into a single value.

extension Sequence where Element: Equatable {
    func numberOfOccurrences(of target: Element) -> Int {
        return reduce(0) { result, element in
            guard element == target else {
                return result
            }

            return result + 1
        }
    }
}

You can read more about transforming collections in "Transforming collections in Swift".

90 Avoiding manual Codable implementations

📦 When I use Codable in Swift, I want to avoid manual implementations as much as possible, even when there's a mismatch between my code structure and the JSON I'm decoding.

One way that can often be achieved is to use private data containers combined with computed properties.

struct User: Codable {
    let name: String
    let age: Int

    var homeTown: String { return originPlace.name }

    private let originPlace: Place
}

private extension User {
    struct Place: Codable {
        let name: String
    }
}

extension User {
    struct Container: Codable {
        let user: User
    }
}

89 Using feature flags instead of feature branches

🚢 Instead of using feature branches, I merge almost all of my code directly into master - and then I use feature flags to conditionally enable features when they're ready. That way I can avoid merge conflicts and keep shipping!

extension ListViewController {
    func addSearchIfNeeded() {
        // Rather than having to keep maintaining a separate
        // feature branch for a new feature, we can use a flag
        // to conditionally turn it on.
        guard FeatureFlags.searchEnabled else {
            return
        }

        let resultsVC = SearchResultsViewController()
        let searchVC = UISearchController(
            searchResultsController: resultsVC
        )

        searchVC.searchResultsUpdater = resultsVC
        navigationItem.searchController = searchVC
    }
}

You can read more about feature flags in "Feature flags in Swift".

88 Lightweight data hierarchies using tuples

💾 Here I'm using tuples to create a lightweight hierarchy for my data, giving me a nice structure without having to introduce any additional types.

struct CodeSegment {
    var tokens: (
        previous: String?,
        current: String
    )

    var delimiters: (
        previous: Character?
        next: Character?
    )
}

handle(segment.tokens.current)

You can read more about tuples in "Using tuples as lightweight types in Swift"

87 The rule of threes

3️⃣ Whenever I have 3 properties or local variables that share the same prefix, I usually try to extract them into their own method or type. That way I can avoid massive types & methods, and also increase readability, without falling into a "premature optimization" trap.

Before

public func generate() throws {
    let contentFolder = try folder.subfolder(named: "content")

    let articleFolder = try contentFolder.subfolder(named: "posts")
    let articleProcessor = ContentProcessor(folder: articleFolder)
    let articles = try articleProcessor.process()

    ...
}

After

public func generate() throws {
    let contentFolder = try folder.subfolder(named: "content")
    let articles = try processArticles(in: contentFolder)
    ...
}

private func processArticles(in folder: Folder) throws -> [ContentItem] {
    let folder = try folder.subfolder(named: "posts")
    let processor = ContentProcessor(folder: folder)
    return try processor.process()
}

86 Useful Codable extensions

👨‍🔧 Here's two extensions that I always add to the Encodable & Decodable protocols, which for me really make the Codable API nicer to use. By using type inference for decoding, a lot of boilerplate can be removed when the compiler is already able to infer the resulting type.

extension Encodable {
    func encoded() throws -> Data {
        return try JSONEncoder().encode(self)
    }
}

extension Data {
    func decoded<T: Decodable>() throws -> T {
        return try JSONDecoder().decode(T.self, from: self)
    }
}

let data = try user.encoded()

// By using a generic type in the decoded() method, the
// compiler can often infer the type we want to decode
// from the current context.
try userDidLogin(data.decoded())

// And if not, we can always supply the type, still making
// the call site read very nicely.
let otherUser = try data.decoded() as User

85 Using shared UserDefaults suites

📦 UserDefaults is a lot more powerful than what it first might seem like. Not only can it store more complex values (like dates & dictionaries) and parse command line arguments - it also enables easy sharing of settings & lightweight data between apps in the same App Group.

let sharedDefaults = UserDefaults(suiteName: "my-app-group")!
let useDarkMode = sharedDefaults.bool(forKey: "dark-mode")

// This value is put into the shared suite.
sharedDefaults.set(true, forKey: "dark-mode")

// If you want to treat the shared settings as read-only (and add
// local overrides on top of them), you can simply add the shared
// suite to the standard UserDefaults.
let combinedDefaults = UserDefaults.standard
combinedDefaults.addSuite(named: "my-app-group")

// This value is a local override, not added to the shared suite.
combinedDefaults.set(true, forKey: "app-specific-override")

84 Custom UIView backing layers

🎨 By overriding layerClass you can tell UIKit what CALayer class to use for a UIView's backing layer. That way you can reduce the amount of layers, and don't have to do any manual layout.

final class GradientView: UIView {
    override class var layerClass: AnyClass { return CAGradientLayer.self }

    var colors: (start: UIColor, end: UIColor)? {
        didSet { updateLayer() }
    }

    private func updateLayer() {
        let layer = self.layer as! CAGradientLayer
        layer.colors = colors.map { [$0.start.cgColor, $0.end.cgColor] }
    }
}

83 Auto-Equatable enums with associated values

✅ That the compiler now automatically synthesizes Equatable conformances is such a huge upgrade for Swift! And the cool thing is that it works for all kinds of types - even for enums with associated values! Especially useful when using enums for verification in unit tests.

struct Article: Equatable {
    let title: String
    let text: String
}

struct User: Equatable {
    let name: String
    let age: Int
}

extension Navigator {
    enum Destination: Equatable {
        case profile(User)
        case article(Article)
    }
}

func testNavigatingToArticle() {
    let article = Article(title: "Title", text: "Text")
    controller.select(article)
    XCTAssertEqual(navigator.destinations, [.article(article)])
}

82 Defaults for associated types

🤝 Associated types can have defaults in Swift - which is super useful for types that are not easily inferred (for example when they're not used for a specific instance method or property).

protocol Identifiable {
    associatedtype RawIdentifier: Codable = String

    var id: Identifier<Self> { get }
}

struct User: Identifiable {
    let id: Identifier<User>
    let name: String
}

struct Group: Identifiable {
    typealias RawIdentifier = Int

    let id: Identifier<Group>
    let name: String
}

81 Creating a dedicated identifier type

🆔 If you want to avoid using plain strings as identifiers (which can increase both type safety & readability), it's really easy to create a custom Identifier type that feels just like a native Swift type, thanks to protocols!

More on this topic in "Type-safe identifiers in Swift".

struct Identifier: Hashable {
    let string: String
}

extension Identifier: ExpressibleByStringLiteral {
    init(stringLiteral value: String) {
        string = value
    }
}

extension Identifier: CustomStringConvertible {
    var description: String {
        return string
    }
}

extension Identifier: Codable {
    init(from decoder: Decoder) throws {
        let container = try decoder.singleValueContainer()
        string = try container.decode(String.self)
    }

    func encode(to encoder: Encoder) throws {
        var container = encoder.singleValueContainer()
        try container.encode(string)
    }
}

struct Article: Codable {
    let id: Identifier
    let title: String
}

let article = Article(id: "my-article", title: "Hello world!")

80 Assigning optional tuple members to variables

🙌 A really cool thing about using tuples to model the internal state of a Swift type, is that you can unwrap an optional tuple's members directly into local variables.

Very useful in order to group multiple optional values together for easy unwrapping & handling.

class ImageTransformer {
    private var queue = [(image: UIImage, transform: Transform)]()

    private func processNext() {
        // When unwrapping an optional tuple, you can assign the members
        // directly to local variables.
        guard let (image, transform) = queue.first else {
            return
        }

        let context = Context()
        context.draw(image)
        context.apply(transform)
        ...
    }
}

79 Struct convenience initializers

❤️ I love to structure my code using extensions in Swift. One big benefit of doing so when it comes to struct initializers, is that defining a convenience initializer doesn't remove the default one the compiler generates - best of both worlds!

struct Article {
    let date: Date
    var title: String
    var text: String
    var comments: [Comment]
}

extension Article {
    init(title: String, text: String) {
        self.init(date: Date(), title: title, text: text, comments: [])
    }
}

let articleA = Article(title: "Best Cupcake Recipe", text: "...")

let articleB = Article(
    date: Date(),
    title: "Best Cupcake Recipe",
    text: "...",
    comments: [
        Comment(user: currentUser, text: "Yep, can confirm!")
    ]
)

78 Usages of throwing functions

🏈 A big benefit of using throwing functions for synchronous Swift APIs is that the caller can decide whether they want to treat the return value as optional (try?) or required (try).

func loadFile(named name: String) throws -> File {
    guard let url = urlForFile(named: name) else {
        throw File.Error.missing
    }

    do {
        let data = try Data(contentsOf: url)
        return File(url: url, data: data)
    } catch {
        throw File.Error.invalidData(error)
    }
}

let requiredFile = try loadFile(named: "AppConfig.json")

let optionalFile = try? loadFile(named: "UserSettings.json")

77 Nested generic types

🐝 Types that are nested in generics automatically inherit their parent's generic types - which is super useful when defining accessory types (for things like states or outcomes).

struct Task<Input, Output> {
    typealias Closure = (Input) throws -> Output

    let closure: Closure
}

extension Task {
    enum Result {
        case success(Output)
        case failure(Error)
    }
}

76 Equatable & Hashable structures

🤖 Now that the Swift compiler automatically synthesizes Equatable & Hashable conformances for value types, it's easier than ever to setup model structures with nested types that are all Equatable/Hashable!

typealias Value = Hashable & Codable

struct User: Value {
    var name: String
    var age: Int
    var lastLoginDate: Date?
    var settings: Settings
}

extension User {
    struct Settings: Value {
        var itemsPerPage: Int
        var theme: Theme
    }
}

extension User.Settings {
    enum Theme: String, Value {
        case light
        case dark
    }
}

You can read more about using nested types in Swift here.

75 Conditional conformances

🎉 Swift 4.1 is here! One of the key features it brings is conditional conformances, which lets you have a type only conform to a protocol under certain constraints.

protocol UnboxTransformable {
    associatedtype RawValue

    static func transform(_ value: RawValue) throws -> Self?
}

extension Array: UnboxTransformable where Element: UnboxTransformable {
    typealias RawValue = [Element.RawValue]

    static func transform(_ value: RawValue) throws -> [Element]? {
        return try value.compactMap(Element.transform)
    }
}

I also have an article with lots of more info on conditional conformances here. Paul Hudson also has a great overview of all Swift 4.1 features here.

74 Generic type aliases

🕵️‍♀️ A cool thing about Swift type aliases is that they can be generic! Combine that with tuples and you can easily define simple generic types.

typealias Pair<T> = (T, T)

extension Game {
    func calculateScore(for players: Pair<Player>) -> Int {
        ...
    }
}

You can read more about using tuples as lightweight types here.

73 Parsing command line arguments using UserDefaults

☑️ A really cool "hidden" feature of UserDefaults is that it contains any arguments that were passed to the app at launch!

Super useful both in Swift command line tools & scripts, but also to temporarily override a value when debugging iOS apps.

let defaults = UserDefaults.standard
let query = defaults.string(forKey: "query")
let resultCount = defaults.integer(forKey: "results")

72 Using the & operator

👏 Swift's & operator is awesome! Not only can you use it to compose protocols, you can compose other types too! Very useful if you want to hide concrete types & implementation details.

protocol LoadableFromURL {
    func load(from url: URL)
}

class ContentViewController: UIViewController, LoadableFromURL {
    func load(from url: URL) {
        ...
    }
}

class ViewControllerFactory {
    func makeContentViewController() -> UIViewController & LoadableFromURL {
        return ContentViewController()
    }
}

71 Capturing multiple values in mocks

🤗 When capturing values in mocks, using an array (instead of just a single value) makes it easy to verify that only a certain number of values were passed.

Perfect for protecting against "over-calling" something.

class UserManagerTests: XCTestCase {
    func testObserversCalledWhenUserFirstLogsIn() {
        let manager = UserManager()

        let observer = ObserverMock()
        manager.addObserver(observer)

        // First login, observers should be notified
        let user = User(id: 123, name: "John")
        manager.userDidLogin(user)
        XCTAssertEqual(observer.users, [user])

        // If the same user logs in again, observers shouldn't be notified
        manager.userDidLogin(user)
        XCTAssertEqual(observer.users, [user])
    }
}

private extension UserManagerTests {
    class ObserverMock: UserManagerObserver {
        private(set) var users = [User]()

        func userDidChange(to user: User) {
            users.append(user)
        }
    }
}

70 Reducing the need for mocks

👋 When writing tests, you don't always need to create mocks - you can create stubs using real instances of things like errors, URLs & UserDefaults.

Here's how to do that for some common tasks/object types in Swift:

// Create errors using NSError (#function can be used to reference the name of the test)
let error = NSError(domain: #function, code: 1, userInfo: nil)

// Create non-optional URLs using file paths
let url = URL(fileURLWithPath: "Some/URL")

// Reference the test bundle using Bundle(for:)
let bundle = Bundle(for: type(of: self))

// Create an explicit UserDefaults object (instead of having to use a mock)
let userDefaults = UserDefaults(suiteName: #function)

// Create queues to control/await concurrent operations
let queue = DispatchQueue(label: #function)

For when you actually do need mocking, check out "Mocking in Swift".

69 Using "then" as an external parameter label for closures

⏱ I've started using "then" as an external parameter label for completion handlers. Makes the call site read really nicely (Because I do ❤️ conversational API design) regardless of whether trailing closure syntax is used or not.

protocol DataLoader {
    // Adding type aliases to protocols can be a great way to
    // reduce verbosity for parameter types.
    typealias Handler = (Result<Data>) -> Void
    associatedtype Endpoint

    func loadData(from endpoint: Endpoint, then handler: @escaping Handler)
}

loader.loadData(from: .messages) { result in
    ...
}

loader.loadData(from: .messages, then: { result in
    ...
})

68 Combining lazily evaluated sequences with the builder pattern

😴 Combining lazily evaluated sequences with builder pattern-like properties can lead to some pretty sweet APIs for configurable sequences in Swift.

Also useful for queries & other things you "build up" and then execute.

// Extension adding builder pattern-like properties that return
// a new sequence value with the given configuration applied
extension FileSequence {
    var recursive: FileSequence {
        var sequence = self
        sequence.isRecursive = true
        return sequence
    }

    var includingHidden: FileSequence {
        var sequence = self
        sequence.includeHidden = true
        return sequence
    }
}

// BEFORE

let files = folder.makeFileSequence(recursive: true, includeHidden: true)

// AFTER

let files = folder.files.recursive.includingHidden

Want an intro to lazy sequences? Check out "Swift sequences: The art of being lazy".

67 Faster & more stable UI tests

My top 3 tips for faster & more stable UI tests:

📱 Reset the app's state at the beginning of every test.

🆔 Use accessibility identifiers instead of UI strings.

⏱ Use expectations instead of waiting time.

func testOpeningArticle() {
    // Launch the app with an argument that tells it to reset its state
    let app = XCUIApplication()
    app.launchArguments.append("--uitesting")
    app.launch()
    
    // Check that the app is displaying an activity indicator
    let activityIndicator = app.activityIndicator.element
    XCTAssertTrue(activityIndicator.exists)
    
    // Wait for the loading indicator to disappear = content is ready
    expectation(for: NSPredicate(format: "exists == 0"),
                evaluatedWith: activityIndicator)
                
    // Use a generous timeout in case the network is slow
    waitForExpectations(timeout: 10)
    
    // Tap the cell for the first article
    app.tables.cells["Article.0"].tap()
    
    // Assert that a label with the accessibility identifier "Article.Title" exists
    let label = app.staticTexts["Article.Title"]
    XCTAssertTrue(label.exists)
}

66 Accessing the clipboard from a Swift script

📋 It's super easy to access the contents of the clipboard from a Swift script. A big benefit of Swift scripting is being able to use Cocoa's powerful APIs for Mac apps.

import Cocoa

let clipboard = NSPasteboard.general.string(forType: .string)

65 Using tuples for view state

🎯 Using Swift tuples for view state can be a super nice way to group multiple properties together and render them reactively using the layout system.

By using a tuple we don't have to either introduce a new type or make our view model-aware.

class TextView: UIView {
    var state: (title: String?, text: String?) {
        // By telling UIKit that our view needs layout and binding our
        // state in layoutSubviews, we can react to state changes without
        // doing unnecessary layout work.
        didSet { setNeedsLayout() }
    }

    private let titleLabel = UILabel()
    private let textLabel = UILabel()

    override func layoutSubviews() {
        super.layoutSubviews()

        titleLabel.text = state.title
        textLabel.text = state.text

        ...
    }
}

64 Throwing tests and LocalizedError

⚾️ Swift tests can throw, which is super useful in order to avoid complicated logic or force unwrapping. By making errors conform to LocalizedError, you can also get a nice error message in Xcode if there's a failure.

class ImageCacheTests: XCTestCase {
    func testCachingAndLoadingImage() throws {
        let bundle = Bundle(for: type(of: self))
        let cache = ImageCache(bundle: bundle)
        
        // Bonus tip: You can easily load images from your test
        // bundle using this UIImage initializer
        let image = try require(UIImage(named: "sample", in: bundle, compatibleWith: nil))
        try cache.cache(image, forKey: "key")
        
        let cachedImage = try cache.image(forKey: "key")
        XCTAssertEqual(image, cachedImage)
    }
}

enum ImageCacheError {
    case emptyKey
    case dataConversionFailed
}

// When using throwing tests, making your errors conform to
// LocalizedError will render a much nicer error message in
// Xcode (per default only the error code is shown).
extension ImageCacheError: LocalizedError {
    var errorDescription: String? {
        switch self {
        case .emptyKey:
            return "An empty key was given"
        case .dataConversionFailed:
            return "Failed to convert the given image to Data"
        }
    }
}

For more information, and the implementation of the require method used above, check out "Avoiding force unwrapping in Swift unit tests".

63 The difference between static and class properties

✍️ Unlike static properties, class properties can be overridden by subclasses (however, they can't be stored, only computed).

class TableViewCell: UITableViewCell {
    class var preferredHeight: CGFloat { return 60 }
}

class TallTableViewCell: TableViewCell {
    override class var preferredHeight: CGFloat { return 100 }
}

62 Creating extensions with static factory methods

👨‍🎨 Creating extensions with static factory methods can be a great alternative to subclassing in Swift, especially for things like setting up UIViews, CALayers or other kinds of styling.

It also lets you remove a lot of styling & setup from your view controllers.

extension UILabel {
    static func makeForTitle() -> UILabel {
        let label = UILabel()
        label.font = .boldSystemFont(ofSize: 24)
        label.textColor = .darkGray
        label.adjustsFontSizeToFitWidth = true
        label.minimumScaleFactor = 0.75
        return label
    }

    static func makeForText() -> UILabel {
        let label = UILabel()
        label.font = .systemFont(ofSize: 16)
        label.textColor = .black
        label.numberOfLines = 0
        return label
    }
}

class ArticleViewController: UIViewController {
    lazy var titleLabel = UILabel.makeForTitle()
    lazy var textLabel = UILabel.makeForText()
}

61 Child view controller auto-resizing

🧒 An awesome thing about child view controllers is that they're automatically resized to match their parent, making them a super nice solution for things like loading & error views.

class ListViewController: UIViewController {
    func loadItems() {
        let loadingViewController = LoadingViewController()
        add(loadingViewController)

        dataLoader.loadItems { [weak self] result in
            loadingViewController.remove()
            self?.handle(result)
        }
    }
}

For more about child view controller (including the add and remove methods used above), check out "Using child view controllers as plugins in Swift".

60 Using zip

🤐 Using the zip function in Swift you can easily combine two sequences. Super useful when using two sequences to do some work, since zip takes care of all the bounds-checking.

func render(titles: [String]) {
    for (label, text) in zip(titleLabels, titles) {
        print(text)
        label.text = text
    }
}

59 Defining custom option sets

🎛 The awesome thing about option sets in Swift is that they can automatically either be passed as a single member or as a set. Even cooler is that you can easily define your own option sets as well, perfect for options and other non-exclusive values.

// Option sets are awesome, because you can easily pass them
// both using dot syntax and array literal syntax, like when
// using the UIView animation API:
UIView.animate(withDuration: 0.3,
               delay: 0,
               options: .allowUserInteraction,
               animations: animations)

UIView.animate(withDuration: 0.3,
               delay: 0,
               options: [.allowUserInteraction, .layoutSubviews],
               animations: animations)

// The cool thing is that you can easily define your own option
// sets as well, by defining a struct that has an Int rawValue,
// that will be used as a bit mask.
extension Cache {
    struct Options: OptionSet {
        static let saveToDisk = Options(rawValue: 1)
        static let clearOnMemoryWarning = Options(rawValue: 1 << 1)
        static let clearDaily = Options(rawValue: 1 << 2)

        let rawValue: Int
    }
}

// We can now use Cache.Options just like UIViewAnimationOptions:
Cache(options: .saveToDisk)
Cache(options: [.saveToDisk, .clearDaily])

58 Using the where clause with associated types

🙌 Using the where clause when designing protocol-oriented APIs in Swift can let your implementations (or others' if it's open source) have a lot more freedom, especially when it comes to collections.

See "Using generic type constraints in Swift 4" for more info.

public protocol PathFinderMap {
    associatedtype Node
    // Using the 'where' clause for associated types, we can
    // ensure that a type meets certain requirements (in this
    // case that it's a sequence with Node elements).
    associatedtype NodeSequence: Sequence where NodeSequence.Element == Node

    // Instead of using a concrete type (like [Node]) here, we
    // give implementors of this protocol more freedom while
    // still meeting our requirements. For example, one
    // implementation might use Set<Node>.
    func neighbors(of node: Node) -> NodeSequence
}

57 Using first class functions when iterating over a dictionary

👨‍🍳 Combine first class functions in Swift with the fact that Dictionary elements are (Key, Value) tuples and you can build yourself some pretty awesome functional chains when iterating over a Dictionary.

func makeActor(at coordinate: Coordinate, for building: Building) -> Actor {
    let actor = Actor()
    actor.position = coordinate.point
    actor.animation = building.animation
    return actor
}

func render(_ buildings: [Coordinate : Building]) {
    buildings.map(makeActor).forEach(add)
}

56 Calling instance methods as static functions

😎 In Swift, you can call any instance method as a static function and it will return a closure representing that method. This is how running tests using SPM on Linux works.

More about this topic in my blog post "First class functions in Swift".

// This produces a '() -> Void' closure which is a reference to the
// given view's 'removeFromSuperview' method.
let closure = UIView.removeFromSuperview(view)

// We can now call it just like we would any other closure, and it
// will run 'view.removeFromSuperview()'
closure()

// This is how running tests using the Swift Package Manager on Linux
// works, you return your test functions as closures:
extension UserManagerTests {
    static var allTests = [
        ("testLoggingIn", testLoggingIn),
        ("testLoggingOut", testLoggingOut),
        ("testUserPermissions", testUserPermissions)
    ]
}

55 Dropping suffixes from method names to support multiple arguments

👏 One really nice benefit of dropping suffixes from method names (and just using verbs, when possible) is that it becomes super easy to support both single and multiple arguments, and it works really well semantically.

extension UIView {
    func add(_ subviews: UIView...) {
        subviews.forEach(addSubview)
    }
}

view.add(button)
view.add(label)

// By dropping the "Subview" suffix from the method name, both
// single and multiple arguments work really well semantically.
view.add(button, label)

54 Constraining protocols to classes to ensure mutability

👽 Using the AnyObject (or class) constraint on protocols is not only useful when defining delegates (or other weak references), but also when you always want instances to be mutable without copying.

// By constraining a protocol with 'AnyObject' it can only be adopted
// by classes, which means all instances will always be mutable, and
// that it's the original instance (not a copy) that will be mutated.
protocol DataContainer: AnyObject {
    var data: Data? { get set }
}

class UserSettingsManager {
    private var settings: Settings
    private let dataContainer: DataContainer

    // Since DataContainer is a protocol, we an easily mock it in
    // tests if we use dependency injection
    init(settings: Settings, dataContainer: DataContainer) {
        self.settings = settings
        self.dataContainer = dataContainer
    }

    func saveSettings() throws {
        let data = try settings.serialize()

        // We can now assign properties on an instance of our protocol
        // because the compiler knows it's always going to be a class
        dataContainer.data = data
    }
}

53 String-based enums in string interpolation

🍣 Even if you define a custom raw value for a string-based enum in Swift, the full case name will be used in string interpolation.

Super useful when using separate raw values for JSON, while still wanting to use the full case name in other contexts.

extension Building {
    // This enum has custom raw values that are used when decoding
    // a value, for example from JSON.
    enum Kind: String {
        case castle = "C"
        case town = "T"
        case barracks = "B"
        case goldMine = "G"
        case camp = "CA"
        case blacksmith = "BL"
    }

    var animation: Animation {
        return Animation(
            // When used in string interpolation, the full case name is still used.
            // For 'castle' this will be 'buildings/castle'.
            name: "buildings/\(kind)",
            frameCount: frameCount,
            frameDuration: frameDuration
        )
    }
}

52 Expressively comparing a value with a list of candidates

👨‍🔬 Continuing to experiment with expressive ways of comparing a value with a list of candidates in Swift. Adding an extension on Equatable is probably my favorite approach so far.

extension Equatable {
    func isAny(of candidates: Self...) -> Bool {
        return candidates.contains(self)
    }
}

let isHorizontal = direction.isAny(of: .left, .right)

See tip 35 for my previous experiment.

51 UIView bounds and transforms

📐 A really interesting side-effect of a UIView's bounds being its rect within its own coordinate system is that transforms don't affect it at all. That's why it's usually a better fit than frame when doing layout calculations of subviews.

let view = UIView()
view.frame.size = CGSize(width: 100, height: 100)
view.transform = CGAffineTransform(scaleX: 2, y: 2)

print(view.frame) // (-50.0, -50.0, 200.0, 200.0)
print(view.bounds) // (0.0, 0.0, 100.0, 100.0)

50 UIKit default arguments

👏 It's awesome that many UIKit APIs with completion handlers and other optional parameters import into Swift with default arguments (even though they are written in Objective-C). Getting rid of all those nil arguments is so nice!

// BEFORE: All parameters are specified, just like in Objective-C

viewController.present(modalViewController, animated: true, completion: nil)

modalViewController.dismiss(animated: true, completion: nil)

viewController.transition(from: loadingViewController,
                          to: contentViewController,
                          duration: 0.3,
                          options: [],
                          animations: animations,
                          completion: nil)

// AFTER: Since many UIKit APIs with completion handlers and other
// optional parameters import into Swift with default arguments,
// we can make our calls shorter

viewController.present(modalViewController, animated: true)

modalViewController.dismiss(animated: true)

viewController.transition(from: loadingViewController,
                          to: contentViewController,
                          duration: 0.3,
                          animations: animations)

49 Avoiding Massive View Controllers

✂️ Avoiding Massive View Controllers is all about finding the right levels of abstraction and splitting things up.

My personal rule of thumb is that as soon as I have 3 methods or properties that have the same prefix, I break them out into their own type.

// BEFORE

class LoginViewController: UIViewController {
    private lazy var signUpLabel = UILabel()
    private lazy var signUpImageView = UIImageView()
    private lazy var signUpButton = UIButton()
}

// AFTER

class LoginViewController: UIViewController {
    private lazy var signUpView = SignUpView()
}

class SignUpView: UIView {
    private lazy var label = UILabel()
    private lazy var imageView = UIImageView()
    private lazy var button = UIButton()
}

48 Extending optionals

❤️ I love the fact that optionals are enums in Swift - it makes it so easy to extend them with convenience APIs for certain types. Especially useful when doing things like data validation on optional values.

func validateTextFields() -> Bool {
    guard !usernameTextField.text.isNilOrEmpty else {
        return false
    }

    ...

    return true
}

// Since all optionals are actual enum values in Swift, we can easily
// extend them for certain types, to add our own convenience APIs

extension Optional where Wrapped == String {
    var isNilOrEmpty: Bool {
        switch self {
        case let string?:
            return string.isEmpty
        case nil:
            return true
        }
    }
}

// Since strings are now Collections in Swift 4, you can even
// add this property to all optional collections:

extension Optional where Wrapped: Collection {
    var isNilOrEmpty: Bool {
        switch self {
        case let collection?:
            return collection.isEmpty
        case nil:
            return true
        }
    }
}

47 Using where with for-loops

🗺 Using the where keyword can be a super nice way to quickly apply a filter in a for-loop in Swift. You can of course use map, filter and forEach, or guard, but for simple loops I think this is very expressive and nice.

func archiveMarkedPosts() {
    for post in posts where post.isMarked {
        archive(post)
    }
}

func healAllies() {
    for player in players where player.isAllied(to: currentPlayer) {
        player.heal()
    }
}

46 Variable shadowing

👻 Variable shadowing can be super useful in Swift, especially when you want to create a local copy of a parameter value in order to use it as state within a closure.

init(repeatMode: RepeatMode, closure: @escaping () -> UpdateOutcome) {
    // Shadow the argument with a local, mutable copy
    var repeatMode = repeatMode
    
    self.closure = {
        // With shadowing, there's no risk of accidentially
        // referring to the immutable version
        switch repeatMode {
        case .forever:
            break
        case .times(let count):
            guard count > 0 else {
                return .finished
            }
            
            // We can now capture the mutable version and use
            // it for state in a closure
            repeatMode = .times(count - 1)
        }
        
        return closure()
    }
}

45 Using dot syntax for static properties and initializers

✒️ Dot syntax is one of my favorite features of Swift. What's really cool is that it's not only for enums, any static method or property can be used with dot syntax - even initializers! Perfect for convenience APIs and default parameters.

public enum RepeatMode {
    case times(Int)
    case forever
}

public extension RepeatMode {
    static var never: RepeatMode {
        return .times(0)
    }

    static var once: RepeatMode {
        return .times(1)
    }
}

view.perform(animation, repeated: .once)

// To make default parameters more compact, you can even use init with dot syntax

class ImageLoader {
    init(cache: Cache = .init(), decoder: ImageDecoder = .init()) {
        ...
    }
}

44 Calling functions as closures with a tuple as parameters

🚀 One really cool aspect of Swift having first class functions is that you can pass any function (or even initializer) as a closure, and even call it with a tuple containing its parameters!

// This function lets us treat any "normal" function or method as
// a closure and run it with a tuple that contains its parameters
func call<Input, Output>(_ function: (Input) -> Output, with input: Input) -> Output {
    return function(input)
}

class ViewFactory {
    func makeHeaderView() -> HeaderView {
        // We can now pass an initializer as a closure, and a tuple
        // containing its parameters
        return call(HeaderView.init, with: loadTextStyles())
    }
    
    private func loadTextStyles() -> (font: UIFont, color: UIColor) {
        return (theme.font, theme.textColor)
    }
}

class HeaderView {
    init(font: UIFont, textColor: UIColor) {
        ...
    }
}

43 Enabling static dependency injection

💉 If you've been struggling to test code that uses static APIs, here's a technique you can use to enable static dependency injection without having to modify any call sites:

// Before: Almost impossible to test due to the use of singletons

class Analytics {
    static func log(_ event: Event) {
        Database.shared.save(event)
        
        let dictionary = event.serialize()
        NetworkManager.shared.post(dictionary, to: eventURL)
    }
}

// After: Much easier to test, since we can inject mocks as arguments

class Analytics {
    static func log(_ event: Event,
                    database: Database = .shared,
                    networkManager: NetworkManager = .shared) {
        database.save(event)
        
        let dictionary = event.serialize()
        networkManager.post(dictionary, to: eventURL)
    }
}

42 Type inference for lazy properties in Swift 4

🎉 In Swift 4, type inference works for lazy properties and you don't need to explicitly refer to self!

// Swift 3

class PurchaseView: UIView {
    private lazy var buyButton: UIButton = self.makeBuyButton()
    
    private func makeBuyButton() -> UIButton {
        let button = UIButton()
        button.setTitle("Buy", for: .normal)
        button.setTitleColor(.blue, for: .normal)
        return button
    }
}

// Swift 4

class PurchaseView: UIView {
    private lazy var buyButton = makeBuyButton()
    
    private func makeBuyButton() -> UIButton {
        let button = UIButton()
        button.setTitle("Buy", for: .normal)
        button.setTitleColor(.blue, for: .normal)
        return button
    }
}

41 Converting Swift errors to NSError

😎 You can turn any Swift Error into an NSError, which is super useful when pattern matching with a code 👍. Also, switching on optionals is pretty cool!

let task = urlSession.dataTask(with: url) { data, _, error in
    switch error {
    case .some(let error as NSError) where error.code == NSURLErrorNotConnectedToInternet:
        presenter.showOfflineView()
    case .some(let error):
        presenter.showGenericErrorView()
    case .none:
        presenter.renderContent(from: data)
    }
}

task.resume()

Also make sure to check out Kostas Kremizas' tip about how you can pattern match directly against a member of URLError.

40 Making UIImage macOS compatible

🖥 Here's an easy way to make iOS model code that uses UIImage macOS compatible - like me and Gui Rambo discussed on the Swift by Sundell Podcast.

// Either put this in a separate file that you only include in your macOS target or wrap the code in #if os(macOS) / #endif

import Cocoa

// Step 1: Typealias UIImage to NSImage
typealias UIImage = NSImage

// Step 2: You might want to add these APIs that UIImage has but NSImage doesn't.
extension NSImage {
    var cgImage: CGImage? {
        var proposedRect = CGRect(origin: .zero, size: size)

        return cgImage(forProposedRect: &proposedRect,
                       context: nil,
                       hints: nil)
    }

    convenience init?(named name: String) {
        self.init(named: Name(name))
    }
}

// Step 3: Profit - you can now make your model code that uses UIImage cross-platform!
struct User {
    let name: String
    let profileImage: UIImage
}

39 Internally mutable protocol-oriented APIs

🤖 You can easily define a protocol-oriented API that can only be mutated internally, by using an internal protocol that extends a public one.

// Declare a public protocol that acts as your immutable API
public protocol ModelHolder {
    associatedtype Model
    var model: Model { get }
}

// Declare an extended, internal protocol that provides a mutable API
internal protocol MutableModelHolder: ModelHolder {
    var model: Model { get set }
}

// You can now implement the requirements using 'public internal(set)'
public class UserHolder: MutableModelHolder {
    public internal(set) var model: User

    internal init(model: User) {
        self.model = model
    }
}

38 Switching on a set

🎛 You can switch on a set using array literals as cases in Swift! Can be really useful to avoid many if/else if statements.

class RoadTile: Tile {
    var connectedDirections = Set<Direction>()

    func render() {
        switch connectedDirections {
        case [.up, .down]:
            image = UIImage(named: "road-vertical")
        case [.left, .right]:
            image = UIImage(named: "road-horizontal")
        default:
            image = UIImage(named: "road")
        }
    }
}

37 Adding the current locale to cache keys

🌍 When caching localized content in an app, it's a good idea to add the current locale to all keys, to prevent bugs when switching languages.

func cache(_ content: Content, forKey key: String) throws {
    let data = try wrap(content) as Data
    let key = localize(key: key)
    try storage.store(data, forKey: key)
}

func loadCachedContent(forKey key: String) -> Content? {
    let key = localize(key: key)
    let data = storage.loadData(forKey: key)
    return data.flatMap { try? unbox(data: $0) }
}

private func localize(key: String) -> String {
    return key + "-" + Bundle.main.preferredLocalizations[0]
}

36 Setting up tests to avoid retain cycles with weak references

🚳 Here's an easy way to setup a test to avoid accidental retain cycles with object relationships (like weak delegates & observers) in Swift:

func testDelegateNotRetained() {
    // Assign the delegate (weak) and also retain it using a local var
    var delegate: Delegate? = DelegateMock()
    controller.delegate = delegate
    XCTAssertNotNil(controller.delegate)
    
    // Release the local var, which should also release the weak reference
    delegate = nil
    XCTAssertNil(controller.delegate)
}

35 Expressively matching a value against a list of candidates

👨‍🔬 Playing around with an expressive way to check if a value matches any of a list of candidates in Swift:

// Instead of multiple conditions like this:

if string == "One" || string == "Two" || string == "Three" {

}

// You can now do:

if string == any(of: "One", "Two", "Three") {

}

You can find a gist with the implementation here.

34 Organizing code using extensions

👪 APIs in a Swift extension automatically inherit its access control level, making it a neat way to organize public, internal & private APIs.

public extension Animation {
    init(textureNamed textureName: String) {
        frames = [Texture(name: textureName)]
    }
    
    init(texturesNamed textureNames: [String], frameDuration: TimeInterval = 1) {
        frames = textureNames.map(Texture.init)
        self.frameDuration = frameDuration
    }
    
    init(image: Image) {
        frames = [Texture(image: image)]
    }
}

internal extension Animation {
    func loadFrameImages() -> [Image] {
        return frames.map { $0.loadImageIfNeeded() }
    }
}

33 Using map to transform an optional into a Result type

🗺 Using map you can transform an optional value into an optional Result type by simply passing in the enum case.

enum Result<Value> {
    case value(Value)
    case error(Error)
}

class Promise<Value> {
    private var result: Result<Value>?
    
    init(value: Value? = nil) {
        result = value.map(Result.value)
    }
}

32 Assigning to self in struct initializers

👌 It's so nice that you can assign directly to self in struct initializers in Swift. Very useful when adding conformance to protocols.

extension Bool: AnswerConvertible {
    public init(input: String) throws {
        switch input.lowercased() {
        case "y", "yes", "👍":
            self = true
        default:
            self = false
        }
    }
}

31 Recursively calling closures as inline functions

☎️ Defining Swift closures as inline functions enables you to recursively call them, which is super useful in things like custom sequences.

class Database {
    func records(matching query: Query) -> AnySequence<Record> {
        var recordIterator = loadRecords().makeIterator()
        
        func iterate() -> Record? {
            guard let nextRecord = recordIterator.next() else {
                return nil
            }
            
            guard nextRecord.matches(query) else {
                // Since the closure is an inline function, it can be recursively called,
                // in this case in order to advance to the next item.
                return iterate()
            }
            
            return nextRecord
        }
        
        // AnySequence/AnyIterator are part of the standard library and provide an easy way
        // to define custom sequences using closures.
        return AnySequence { AnyIterator(iterate) }
    }
}

Rob Napier points out that using the above might cause crashes if used on a large databaset, since Swift has no guaranteed Tail Call Optimization (TCO).

Slava Pestov also points out that another benefit of inline functions vs closures is that they can have their own generic parameter list.

30 Passing self to required Objective-C dependencies

🏖 Using lazy properties in Swift, you can pass self to required Objective-C dependencies without having to use force-unwrapped optionals.

class DataLoader: NSObject {
    lazy var urlSession: URLSession = self.makeURLSession()
    
    private func makeURLSession() -> URLSession {
        return URLSession(configuration: .default, delegate: self, delegateQueue: .main)
    }
}

class Renderer {
    lazy var displayLink: CADisplayLink = self.makeDisplayLink()
    
    private func makeDisplayLink() -> CADisplayLink {
        return CADisplayLink(target: self, selector: #selector(screenDidRefresh))
    }
}

29 Making weak or lazy properties readonly

👓 If you have a property in Swift that needs to be weak or lazy, you can still make it readonly by using private(set).

class Node {
    private(set) weak var parent: Node?
    private(set) lazy var children = [Node]()

    func add(child: Node) {
        children.append(child)
        child.parent = self
    }
}

28 Defining static URLs using string literals

🌏 Tired of using URL(string: "url")! for static URLs? Make URL conform to ExpressibleByStringLiteral and you can now simply use "url" instead.

extension URL: ExpressibleByStringLiteral {
    // By using 'StaticString' we disable string interpolation, for safety
    public init(stringLiteral value: StaticString) {
        self = URL(string: "\(value)").require(hint: "Invalid URL string literal: \(value)")
    }
}

// We can now define URLs using static string literals 🎉
let url: URL = "https://www.swiftbysundell.com"
let task = URLSession.shared.dataTask(with: "https://www.swiftbysundell.com")

// In Swift 3 or earlier, you also have to implement 2 additional initializers
extension URL {
    public init(extendedGraphemeClusterLiteral value: StaticString) {
        self.init(stringLiteral: value)
    }

    public init(unicodeScalarLiteral value: StaticString) {
        self.init(stringLiteral: value)
    }
}

To find the extension that adds the require() method on Optional that I use above, check out Require.

27 Manipulating points, sizes and frames using math operators

✚ I'm always careful with operator overloading, but for manipulating things like sizes, points & frames I find them super useful.

extension CGSize {
    static func *(lhs: CGSize, rhs: CGFloat) -> CGSize {
        return CGSize(width: lhs.width * rhs, height: lhs.height * rhs)
    }
}

button.frame.size = image.size * 2

If you like the above idea, check out CGOperators, which contains math operator overloads for all Core Graphics' vector types.

26 Using closure types in generic constraints

🔗 You can use closure types in generic constraints in Swift. Enables nice APIs for handling sequences of closures.

extension Sequence where Element == () -> Void {
    func callAll() {
        forEach { $0() }
    }
}

extension Sequence where Element == () -> String {
    func joinedResults(separator: String) -> String {
        return map { $0() }.joined(separator: separator)
    }
}

callbacks.callAll()
let names = nameProviders.joinedResults(separator: ", ")

(If you're using Swift 3, you have to change Element to Iterator.Element)

25 Using associated enum values to avoid state-specific optionals

🎉 Using associated enum values is a super nice way to encapsulate mutually exclusive state info (and avoiding state-specific optionals).

// BEFORE: Lots of state-specific, optional properties

class Player {
    var isWaitingForMatchMaking: Bool
    var invitingUser: User?
    var numberOfLives: Int
    var playerDefeatedBy: Player?
    var roundDefeatedIn: Int?
}

// AFTER: All state-specific information is encapsulated in enum cases

class Player {
    enum State {
        case waitingForMatchMaking
        case waitingForInviteResponse(from: User)
        case active(numberOfLives: Int)
        case defeated(by: Player, roundNumber: Int)
    }
    
    var state: State
}

24 Using enums for async result types

👍 I really like using enums for all async result types, even boolean ones. Self-documenting, and makes the call site a lot nicer to read too!

protocol PushNotificationService {
    // Before
    func enablePushNotifications(completionHandler: @escaping (Bool) -> Void)
    
    // After
    func enablePushNotifications(completionHandler: @escaping (PushNotificationStatus) -> Void)
}

enum PushNotificationStatus {
    case enabled
    case disabled
}

service.enablePushNotifications { status in
    if status == .enabled {
        enableNotificationsButton.removeFromSuperview()
    }
}

23 Working on async code in a playground

🏃 Want to work on your async code in a Swift Playground? Just set needsIndefiniteExecution to true to keep it running:

import PlaygroundSupport

PlaygroundPage.current.needsIndefiniteExecution = true

DispatchQueue.main.asyncAfter(deadline: .now() + 3) {
    let greeting = "Hello after 3 seconds"
    print(greeting)
}

To stop the playground from executing, simply call PlaygroundPage.current.finishExecution().

22 Overriding self with a weak reference

💦 Avoid memory leaks when accidentially refering to self in closures by overriding it locally with a weak reference:

Swift >= 4.2

dataLoader.loadData(from: url) { [weak self] result in
    guard let self = self else { 
        return 
    }

    self.cache(result)
    
    ...

Swift < 4.2

dataLoader.loadData(from: url) { [weak self] result in
    guard let `self` = self else {
        return
    }

    self.cache(result)
    
    ...

Note that the reason the above currently works is because of a compiler bug (which I hope gets turned into a properly supported feature soon).

21 Using DispatchWorkItem

🕓 Using dispatch work items you can easily cancel a delayed asynchronous GCD task if you no longer need it:

let workItem = DispatchWorkItem {
    // Your async code goes in here
}

// Execute the work item after 1 second
DispatchQueue.main.asyncAfter(deadline: .now() + 1, execute: workItem)

// You can cancel the work item if you no longer need it
workItem.cancel()

20 Combining a sequence of functions

➕ While working on a new Swift developer tool (to be open sourced soon 😉), I came up with a pretty neat way of organizing its sequence of operations, by combining their functions into a closure:

internal func +<A, B, C>(lhs: @escaping (A) throws -> B,
                         rhs: @escaping (B) throws -> C) -> (A) throws -> C {
    return { try rhs(lhs($0)) }
}

public func run() throws {
    try (determineTarget + build + analyze + output)()
}

If you're familiar with the functional programming world, you might know the above technique as the pipe operator (thanks to Alexey Demedreckiy for pointing this out!)

19 Chaining optionals with map() and flatMap()

🗺 Using map() and flatMap() on optionals you can chain multiple operations without having to use lengthy if lets or guards:

// BEFORE

guard let string = argument(at: 1) else {
    return
}

guard let url = URL(string: string) else {
    return
}

handle(url)

// AFTER

argument(at: 1).flatMap(URL.init).map(handle)

18 Using self-executing closures for lazy properties

🚀 Using self-executing closures is a great way to encapsulate lazy property initialization:

class StoreViewController: UIViewController {
    private lazy var collectionView: UICollectionView = {
        let layout = UICollectionViewFlowLayout()
        let view = UICollectionView(frame: self.view.bounds, collectionViewLayout: layout)
        view.delegate = self
        view.dataSource = self
        return view
    }()
    
    override func viewDidLoad() {
        super.viewDidLoad()
        view.addSubview(collectionView)
    }
}

17 Speeding up Swift package tests

⚡️ You can speed up your Swift package tests using the --parallel flag. For Marathon, the tests execute 3 times faster that way!

swift test --parallel

16 Avoiding mocking UserDefaults

🛠 Struggling with mocking UserDefaults in a test? The good news is: you don't need mocking - just create a real instance:

class LoginTests: XCTestCase {
    private var userDefaults: UserDefaults!
    private var manager: LoginManager!
    
    override func setUp() {
        super.setup()
        
        userDefaults = UserDefaults(suiteName: #file)
        userDefaults.removePersistentDomain(forName: #file)
        
        manager = LoginManager(userDefaults: userDefaults)
    }
}

15 Using variadic parameters

👍 Using variadic parameters in Swift, you can create some really nice APIs that take a list of objects without having to use an array:

extension Canvas {
    func add(_ shapes: Shape...) {
        shapes.forEach(add)
    }
}

let circle = Circle(center: CGPoint(x: 5, y: 5), radius: 5)
let lineA = Line(start: .zero, end: CGPoint(x: 10, y: 10))
let lineB = Line(start: CGPoint(x: 0, y: 10), end: CGPoint(x: 10, y: 0))

let canvas = Canvas()
canvas.add(circle, lineA, lineB)
canvas.render()

14 Referring to enum cases with associated values as closures

😮 Just like you can refer to a Swift function as a closure, you can do the same thing with enum cases with associated values:

enum UnboxPath {
    case key(String)
    case keyPath(String)
}

struct UserSchema {
    static let name = key("name")
    static let age = key("age")
    static let posts = key("posts")
    
    private static let key = UnboxPath.key
}

13 Using the === operator to compare objects by instance

📈 The === operator lets you check if two objects are the same instance. Very useful when verifying that an array contains an instance in a test:

protocol InstanceEquatable: class, Equatable {}

extension InstanceEquatable {
    static func ==(lhs: Self, rhs: Self) -> Bool {
        return lhs === rhs
    }
}

extension Enemy: InstanceEquatable {}

func testDestroyingEnemy() {
    player.attack(enemy)
    XCTAssertTrue(player.destroyedEnemies.contains(enemy))
}

12 Calling initializers with dot syntax and passing them as closures

😎 Cool thing about Swift initializers: you can call them using dot syntax and pass them as closures! Perfect for mocking dates in tests.

class Logger {
    private let storage: LogStorage
    private let dateProvider: () -> Date
    
    init(storage: LogStorage = .init(), dateProvider: @escaping () -> Date = Date.init) {
        self.storage = storage
        self.dateProvider = dateProvider
    }
    
    func log(event: Event) {
        storage.store(event: event, date: dateProvider())
    }
}

11 Structuring UI tests as extensions on XCUIApplication

📱 Most of my UI testing logic is now categories on XCUIApplication. Makes the test cases really easy to read:

func testLoggingInAndOut() {
    XCTAssertFalse(app.userIsLoggedIn)
    
    app.launch()
    app.login()
    XCTAssertTrue(app.userIsLoggedIn)
    
    app.logout()
    XCTAssertFalse(app.userIsLoggedIn)
}

func testDisplayingCategories() {
    XCTAssertFalse(app.isDisplayingCategories)
    
    app.launch()
    app.login()
    app.goToCategories()
    XCTAssertTrue(app.isDisplayingCategories)
}

10 Avoiding default cases in switch statements

🙂 It’s a good idea to avoid “default” cases when switching on Swift enums - it’ll “force you” to update your logic when a new case is added:

enum State {
    case loggedIn
    case loggedOut
    case onboarding
}

func handle(_ state: State) {
    switch state {
    case .loggedIn:
        showMainUI()
    case .loggedOut:
        showLoginUI()
    // Compiler error: Switch must be exhaustive
    }
}

9 Using the guard statement in many different scopes

💂 It's really cool that you can use Swift's 'guard' statement to exit out of pretty much any scope, not only return from functions:

// You can use the 'guard' statement to...

for string in strings {
    // ...continue an iteration
    guard shouldProcess(string) else {
        continue
    }
    
    // ...or break it
    guard !shouldBreak(for: string) else {
        break
    }
    
    // ...or return
    guard !shouldReturn(for: string) else {
        return
    }
    
    // ..or throw an error
    guard string.isValid else {
        throw StringError.invalid(string)
    }
    
    // ...or exit the program
    guard !shouldExit(for: string) else {
        exit(1)
    }
}

8 Passing functions & operators as closures

❤️ Love how you can pass functions & operators as closures in Swift. For example, it makes the syntax for sorting arrays really nice!

let array = [3, 9, 1, 4, 6, 2]
let sorted = array.sorted(by: <)

7 Using #function for UserDefaults key consistency

🗝 Here's a neat little trick I use to get UserDefault key consistency in Swift (#function expands to the property name in getters/setters). Just remember to write a good suite of tests that'll guard you against bugs when changing property names.

extension UserDefaults {
    var onboardingCompleted: Bool {
        get { return bool(forKey: #function) }
        set { set(newValue, forKey: #function) }
    }
}

6 Using a name already taken by the standard library

📛 Want to use a name already taken by the standard library for a nested type? No problem - just use Swift. to disambiguate:

extension Command {
    enum Error: Swift.Error {
        case missing
        case invalid(String)
    }
}

5 Using Wrap to implement Equatable

📦 Playing around with using Wrap to implement Equatable for any type, primarily for testing:

protocol AutoEquatable: Equatable {}

extension AutoEquatable {
    static func ==(lhs: Self, rhs: Self) -> Bool {
        let lhsData = try! wrap(lhs) as Data
        let rhsData = try! wrap(rhs) as Data
        return lhsData == rhsData
    }
}

4 Using typealiases to reduce the length of method signatures

📏 One thing that I find really useful in Swift is to use typealiases to reduce the length of method signatures in generic types:

public class PathFinder<Object: PathFinderObject> {
    public typealias Map = Object.Map
    public typealias Node = Map.Node
    public typealias Path = PathFinderPath<Object>
    
    public static func possiblePaths(for object: Object, at rootNode: Node, on map: Map) -> Path.Sequence {
        return .init(object: object, rootNode: rootNode, map: map)
    }
}

3 Referencing either external or internal parameter name when writing docs

📖 You can reference either the external or internal parameter label when writing Swift docs - and they get parsed the same:

// EITHER:

class Foo {
    /**
    *   - parameter string: A string
    */
    func bar(with string: String) {}
}

// OR:

class Foo {
    /**
    *   - parameter with: A string
    */
    func bar(with string: String) {}
}

2 Using auto closures

👍 Finding more and more uses for auto closures in Swift. Can enable some pretty nice APIs:

extension Dictionary {
    mutating func value(for key: Key, orAdd valueClosure: @autoclosure () -> Value) -> Value {
        if let value = self[key] {
            return value
        }
        
        let value = valueClosure()
        self[key] = value
        return value
    }
}

1 Namespacing with nested types

🚀 I’ve started to become a really big fan of nested types in Swift. Love the additional namespacing it gives you!

public struct Map {
    public struct Model {
        public let size: Size
        public let theme: Theme
        public var terrain: [Position : Terrain.Model]
        public var units: [Position : Unit.Model]
        public var buildings: [Position : Building.Model]
    }
    
    public enum Direction {
        case up
        case right
        case down
        case left
    }
    
    public struct Position {
        public var x: Int
        public var y: Int
    }
    
    public enum Size: String {
        case small = "S"
        case medium = "M"
        case large = "L"
        case extraLarge = "XL"
    }
}

Download Details:

Author: JohnSundell
Source Code: https://github.com/JohnSundell/SwiftTips 
License: MIT license

#swift #tips #tricks 

Calling an AWS Lambda function from another Lambda function

In this article, I am going to explain how to create an AWS Lambda function and then call this function from another Lambda function within the same region. This is a useful scenario in which we may need to execute a second lambda function based on the outcome of some previous logic. Another scenario may be to execute a second lambda function several times by using different parameters.

For the sake of this article, we will consider a typical retailer application, in which we can purchase different products from a retailer site using a lambda function.

Figure 1 – Architecture Diagram

If you consider the above architecture diagram, you can see that we have an AWS lambda function – the ParentFunction, which assumes a specific role from the IAM (Invoke Other Lambda Function) and then calls another lambda function – the ChildFunction with a payload. Once the execution of the ChildFunction is completed, it returns a response, which is then passed on to the ParentFunction. The ParentFunction receives the response and handles the job accordingly.

As in this example, let us assume that the ParentFunction is going to call the ChildFunction with a payload of ProductName, Quantity, and the UnitPrice of that product. The ChildFunction, in turn, will process this payload, calculate the total sales amount, generate a transaction reference ID, and return this information to the ParentFunction.

Creating the first AWS Lambda Function – ChildFunction

Let us first go ahead and create the ChildFunction, which will process the input payload and return the results to the ParentFunction.

#aws rds #functions #aws #lambda function

Variables Globales De Python: Cómo Definir Un Ejemplo De Variable Glob

En este artículo, aprenderá los conceptos básicos de las variables globales.

Para empezar, aprenderá cómo declarar variables en Python y qué significa realmente el término 'ámbito de variable'.

Luego, aprenderá las diferencias entre variables locales y globales y comprenderá cómo definir variables globales y cómo usar la globalpalabra clave.

¿Qué son las variables en Python y cómo se crean? Una introducción para principiantes

Puede pensar en las variables como contenedores de almacenamiento .

Son contenedores de almacenamiento para almacenar datos, información y valores que le gustaría guardar en la memoria de la computadora. Luego puede hacer referencia a ellos o incluso manipularlos en algún momento a lo largo de la vida del programa.

Una variable tiene un nombre simbólico y puede pensar en ese nombre como la etiqueta en el contenedor de almacenamiento que actúa como su identificador.

El nombre de la variable será una referencia y un puntero a los datos almacenados en su interior. Por lo tanto, no es necesario recordar los detalles de sus datos e información; solo necesita hacer referencia al nombre de la variable que contiene esos datos e información.

Al dar un nombre a una variable, asegúrese de que sea descriptivo de los datos que contiene. Los nombres de las variables deben ser claros y fácilmente comprensibles tanto para usted en el futuro como para los otros desarrolladores con los que puede estar trabajando.

Ahora, veamos cómo crear una variable en Python.

Al declarar variables en Python, no necesita especificar su tipo de datos.

Por ejemplo, en el lenguaje de programación C, debe mencionar explícitamente el tipo de datos que contendrá la variable.

Entonces, si quisiera almacenar su edad, que es un número entero, o inttipo, esto es lo que tendría que hacer en C:

#include <stdio.h>
 
int main(void)
{
  int age = 28;
  // 'int' is the data type
  // 'age' is the name 
  // 'age' is capable of holding integer values
  // positive/negative whole numbers or 0
  // '=' is the assignment operator
  // '28' is the value
}

Sin embargo, así es como escribirías lo anterior en Python:

age = 28

#'age' is the variable name, or identifier
# '=' is the assignment operator
#'28' is the value assigned to the variable, so '28' is the value of 'age'

El nombre de la variable siempre está en el lado izquierdo y el valor que desea asignar va en el lado derecho después del operador de asignación.

Tenga en cuenta que puede cambiar los valores de las variables a lo largo de la vida de un programa:

my_age = 28

print(f"My age in 2022 is {my_age}.")

my_age = 29

print(f"My age in 2023 will be {my_age}.")

#output

#My age in 2022 is 28.
#My age in 2023 will be 29.

Mantienes el mismo nombre de variable my_age, pero solo cambias el valor de 28a 29.

¿Qué significa el alcance variable en Python?

El alcance de la variable se refiere a las partes y los límites de un programa de Python donde una variable está disponible, accesible y visible.

Hay cuatro tipos de alcance para las variables de Python, que también se conocen como la regla LEGB :

• local ,
• Encerrando ,
• globales ,
• Incorporado .

En el resto de este artículo, se centrará en aprender a crear variables con alcance global y comprenderá la diferencia entre los alcances de variables locales y globales.

Cómo crear variables con alcance local en Python

Las variables definidas dentro del cuerpo de una función tienen alcance local , lo que significa que solo se puede acceder a ellas dentro de esa función en particular. En otras palabras, son 'locales' para esa función.

Solo puede acceder a una variable local llamando a la función.

def learn_to_code():
    #create local variable
    coding_website = "freeCodeCamp"
    print(f"The best place to learn to code is with {coding_website}!")

#call function
learn_to_code()


#output

#The best place to learn to code is with freeCodeCamp!

Mire lo que sucede cuando trato de acceder a esa variable con un alcance local desde fuera del cuerpo de la función:

def learn_to_code():
    #create local variable
    coding_website = "freeCodeCamp"
    print(f"The best place to learn to code is with {coding_website}!")

#try to print local variable 'coding_website' from outside the function
print(coding_website)

#output

#NameError: name 'coding_website' is not defined

Plantea un NameErrorporque no es 'visible' en el resto del programa. Solo es 'visible' dentro de la función donde se definió.

Cómo crear variables con alcance global en Python

Cuando define una variable fuera de una función, como en la parte superior del archivo, tiene un alcance global y se conoce como variable global.

Se accede a una variable global desde cualquier parte del programa.

Puede usarlo dentro del cuerpo de una función, así como acceder desde fuera de una función:

#create a global variable
coding_website = "freeCodeCamp"

def learn_to_code():
    #access the variable 'coding_website' inside the function
    print(f"The best place to learn to code is with {coding_website}!")

#call the function
learn_to_code()

#access the variable 'coding_website' from outside the function
print(coding_website)

#output

#The best place to learn to code is with freeCodeCamp!
#freeCodeCamp

¿Qué sucede cuando hay una variable global y local, y ambas tienen el mismo nombre?

#global variable
city = "Athens"

def travel_plans():
    #local variable with the same name as the global variable
    city = "London"
    print(f"I want to visit {city} next year!")

#call function - this will output the value of local variable
travel_plans()

#reference global variable - this will output the value of global variable
print(f"I want to visit {city} next year!")

#output

#I want to visit London next year!
#I want to visit Athens next year!

En el ejemplo anterior, tal vez no esperaba ese resultado específico.

Tal vez pensaste que el valor de citycambiaría cuando le asignara un valor diferente dentro de la función.

Tal vez esperabas que cuando hice referencia a la variable global con la línea print(f" I want to visit {city} next year!"), la salida sería en #I want to visit London next year!lugar de #I want to visit Athens next year!.

Sin embargo, cuando se llamó a la función, imprimió el valor de la variable local.

Luego, cuando hice referencia a la variable global fuera de la función, se imprimió el valor asignado a la variable global.

No interfirieron entre sí.

Dicho esto, usar el mismo nombre de variable para variables globales y locales no se considera una buena práctica. Asegúrese de que sus variables no tengan el mismo nombre, ya que puede obtener algunos resultados confusos cuando ejecute su programa.

Cómo usar la globalpalabra clave en Python

¿Qué sucede si tiene una variable global pero desea cambiar su valor dentro de una función?

Mira lo que sucede cuando trato de hacer eso:

#global variable
city = "Athens"

def travel_plans():
    #First, this is like when I tried to access the global variable defined outside the function. 
    # This works fine on its own, as you saw earlier on.
    print(f"I want to visit {city} next year!")

    #However, when I then try to re-assign a different value to the global variable 'city' from inside the function,
    #after trying to print it,
    #it will throw an error
    city = "London"
    print(f"I want to visit {city} next year!")

#call function
travel_plans()

#output

#UnboundLocalError: local variable 'city' referenced before assignment

Por defecto, Python piensa que quieres usar una variable local dentro de una función.

Entonces, cuando intento imprimir el valor de la variable por primera vez y luego reasignar un valor a la variable a la que intento acceder, Python se confunde.

La forma de cambiar el valor de una variable global dentro de una función es usando la globalpalabra clave:

#global variable
city = "Athens"

#print value of global variable
print(f"I want to visit {city} next year!")

def travel_plans():
    global city
    #print initial value of global variable
    print(f"I want to visit {city} next year!")
    #assign a different value to global variable from within function
    city = "London"
    #print new value
    print(f"I want to visit {city} next year!")

#call function
travel_plans()

#print value of global variable
print(f"I want to visit {city} next year!")

Utilice la globalpalabra clave antes de hacer referencia a ella en la función, ya que obtendrá el siguiente error: SyntaxError: name 'city' is used prior to global declaration.

Anteriormente, vio que no podía acceder a las variables creadas dentro de las funciones ya que tienen un alcance local.

La globalpalabra clave cambia la visibilidad de las variables declaradas dentro de las funciones.

def learn_to_code():
   global coding_website
   coding_website = "freeCodeCamp"
   print(f"The best place to learn to code is with {coding_website}!")

#call function
learn_to_code()

#access variable from within the function
print(coding_website)

#output

#The best place to learn to code is with freeCodeCamp!
#freeCodeCamp

Conclusión

¡Y ahí lo tienes! Ahora conoce los conceptos básicos de las variables globales en Python y puede distinguir las diferencias entre las variables locales y globales.

Espero que hayas encontrado útil este artículo.

Comenzará desde lo básico y aprenderá de una manera interactiva y amigable para principiantes. También construirá cinco proyectos al final para poner en práctica y ayudar a reforzar lo que ha aprendido.

¡Gracias por leer y feliz codificación!

Fuente: https://www.freecodecamp.org/news/python-global-variables-examples/

#python 

Python Global Variables – How to Define a Global Variable Example

In this article, you will learn the basics of global variables.

To begin with, you will learn how to declare variables in Python and what the term 'variable scope' actually means.

Then, you will learn the differences between local and global variables and understand how to define global variables and how to use the global keyword.

What Are Variables in Python and How Do You Create Them? An Introduction for Beginners

You can think of variables as storage containers.

They are storage containers for holding data, information, and values that you would like to save in the computer's memory. You can then reference or even manipulate them at some point throughout the life of the program.

A variable has a symbolic name, and you can think of that name as the label on the storage container that acts as its identifier.

The variable name will be a reference and pointer to the data stored inside it. So, there is no need to remember the details of your data and information – you only need to reference the variable name that holds that data and information.

When giving a variable a name, make sure that it is descriptive of the data it holds. Variable names need to be clear and easily understandable both for your future self and the other developers you may be working with.

Now, let's see how to actually create a variable in Python.

When declaring variables in Python, you don't need to specify their data type.

For example, in the C programming language, you have to mention explicitly the type of data the variable will hold.

So, if you wanted to store your age which is an integer, or int type, this is what you would have to do in C:

#include <stdio.h>
 
int main(void)
{
  int age = 28;
  // 'int' is the data type
  // 'age' is the name 
  // 'age' is capable of holding integer values
  // positive/negative whole numbers or 0
  // '=' is the assignment operator
  // '28' is the value
}

However, this is how you would write the above in Python:

age = 28

#'age' is the variable name, or identifier
# '=' is the assignment operator
#'28' is the value assigned to the variable, so '28' is the value of 'age'

The variable name is always on the left-hand side, and the value you want to assign goes on the right-hand side after the assignment operator.

Keep in mind that you can change the values of variables throughout the life of a program:

my_age = 28

print(f"My age in 2022 is {my_age}.")

my_age = 29

print(f"My age in 2023 will be {my_age}.")

#output

#My age in 2022 is 28.
#My age in 2023 will be 29.

You keep the same variable name, my_age, but only change the value from 28 to 29.

What Does Variable Scope in Python Mean?

Variable scope refers to the parts and boundaries of a Python program where a variable is available, accessible, and visible.

There are four types of scope for Python variables, which are also known as the LEGB rule:

• Local,
• Enclosing,
• Global,
• Built-in.

For the rest of this article, you will focus on learning about creating variables with global scope, and you will understand the difference between the local and global variable scopes.

How to Create Variables With Local Scope in Python

Variables defined inside a function's body have local scope, which means they are accessible only within that particular function. In other words, they are 'local' to that function.

You can only access a local variable by calling the function.

def learn_to_code():
    #create local variable
    coding_website = "freeCodeCamp"
    print(f"The best place to learn to code is with {coding_website}!")

#call function
learn_to_code()


#output

#The best place to learn to code is with freeCodeCamp!

Look at what happens when I try to access that variable with a local scope from outside the function's body:

def learn_to_code():
    #create local variable
    coding_website = "freeCodeCamp"
    print(f"The best place to learn to code is with {coding_website}!")

#try to print local variable 'coding_website' from outside the function
print(coding_website)

#output

#NameError: name 'coding_website' is not defined

It raises a NameError because it is not 'visible' in the rest of the program. It is only 'visible' within the function where it was defined.

How to Create Variables With Global Scope in Python

When you define a variable outside a function, like at the top of the file, it has a global scope and it is known as a global variable.

A global variable is accessed from anywhere in the program.

You can use it inside a function's body, as well as access it from outside a function:

#create a global variable
coding_website = "freeCodeCamp"

def learn_to_code():
    #access the variable 'coding_website' inside the function
    print(f"The best place to learn to code is with {coding_website}!")

#call the function
learn_to_code()

#access the variable 'coding_website' from outside the function
print(coding_website)

#output

#The best place to learn to code is with freeCodeCamp!
#freeCodeCamp

What happens when there is a global and local variable, and they both have the same name?

#global variable
city = "Athens"

def travel_plans():
    #local variable with the same name as the global variable
    city = "London"
    print(f"I want to visit {city} next year!")

#call function - this will output the value of local variable
travel_plans()

#reference global variable - this will output the value of global variable
print(f"I want to visit {city} next year!")

#output

#I want to visit London next year!
#I want to visit Athens next year!

In the example above, maybe you were not expecting that specific output.

Maybe you thought that the value of city would change when I assigned it a different value inside the function.

Maybe you expected that when I referenced the global variable with the line print(f" I want to visit {city} next year!"), the output would be #I want to visit London next year! instead of #I want to visit Athens next year!.

However, when the function was called, it printed the value of the local variable.

Then, when I referenced the global variable outside the function, the value assigned to the global variable was printed.

They didn't interfere with one another.

That said, using the same variable name for global and local variables is not considered a best practice. Make sure that your variables don't have the same name, as you may get some confusing results when you run your program.

How to Use the global Keyword in Python

What if you have a global variable but want to change its value inside a function?

Look at what happens when I try to do that:

#global variable
city = "Athens"

def travel_plans():
    #First, this is like when I tried to access the global variable defined outside the function. 
    # This works fine on its own, as you saw earlier on.
    print(f"I want to visit {city} next year!")

    #However, when I then try to re-assign a different value to the global variable 'city' from inside the function,
    #after trying to print it,
    #it will throw an error
    city = "London"
    print(f"I want to visit {city} next year!")

#call function
travel_plans()

#output

#UnboundLocalError: local variable 'city' referenced before assignment

By default Python thinks you want to use a local variable inside a function.

So, when I first try to print the value of the variable and then re-assign a value to the variable I am trying to access, Python gets confused.

The way to change the value of a global variable inside a function is by using the global keyword:

#global variable
city = "Athens"

#print value of global variable
print(f"I want to visit {city} next year!")

def travel_plans():
    global city
    #print initial value of global variable
    print(f"I want to visit {city} next year!")
    #assign a different value to global variable from within function
    city = "London"
    #print new value
    print(f"I want to visit {city} next year!")

#call function
travel_plans()

#print value of global variable
print(f"I want to visit {city} next year!")

Use the global keyword before referencing it in the function, as you will get the following error: SyntaxError: name 'city' is used prior to global declaration.

Earlier, you saw that you couldn't access variables created inside functions since they have local scope.

The global keyword changes the visibility of variables declared inside functions.

def learn_to_code():
   global coding_website
   coding_website = "freeCodeCamp"
   print(f"The best place to learn to code is with {coding_website}!")

#call function
learn_to_code()

#access variable from within the function
print(coding_website)

#output

#The best place to learn to code is with freeCodeCamp!
#freeCodeCamp

Conclusion

And there you have it! You now know the basics of global variables in Python and can tell the differences between local and global variables.

I hope you found this article useful.

You'll start from the basics and learn in an interactive and beginner-friendly way. You'll also build five projects at the end to put into practice and help reinforce what you've learned.

Thanks for reading and happy coding!

Source: https://www.freecodecamp.org/news/python-global-variables-examples/

#python