Cyril Parisian

Cyril Parisian

1618622460

Recursion: to the end of the stack, and back-

As a programmer, one of the most key attributes you can have is optimization. In programming, this can be put into practice in a wide variety of ways, and the more you incorporate, the better of a progammer you will be.

Some recommended optimization practices include being able to explain an algorithm in as few words as possible and getting it through, whiteboarding clearly and as educationally as possible, and efficient coding that prevents over use of system memory. With small programs, the total run time may not be an issue, but with bigger programs it may become a hassle if the code bulks the system and runs slow — a.k.a is not optimal.

#c #recursion #programming #c#

What is GEEK

Buddha Community

Recursion: to the end of the stack, and back-
Hermann Frami

Hermann Frami

1651383480

A Simple Wrapper Around Amplify AppSync Simulator

This serverless plugin is a wrapper for amplify-appsync-simulator made for testing AppSync APIs built with serverless-appsync-plugin.

Install

npm install serverless-appsync-simulator
# or
yarn add serverless-appsync-simulator

Usage

This plugin relies on your serverless yml file and on the serverless-offline plugin.

plugins:
  - serverless-dynamodb-local # only if you need dynamodb resolvers and you don't have an external dynamodb
  - serverless-appsync-simulator
  - serverless-offline

Note: Order is important serverless-appsync-simulator must go before serverless-offline

To start the simulator, run the following command:

sls offline start

You should see in the logs something like:

...
Serverless: AppSync endpoint: http://localhost:20002/graphql
Serverless: GraphiQl: http://localhost:20002
...

Configuration

Put options under custom.appsync-simulator in your serverless.yml file

| option | default | description | | ------------------------ | -------------------------- | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | --------- | | apiKey | 0123456789 | When using API_KEY as authentication type, the key to authenticate to the endpoint. | | port | 20002 | AppSync operations port; if using multiple APIs, the value of this option will be used as a starting point, and each other API will have a port of lastPort + 10 (e.g. 20002, 20012, 20022, etc.) | | wsPort | 20003 | AppSync subscriptions port; if using multiple APIs, the value of this option will be used as a starting point, and each other API will have a port of lastPort + 10 (e.g. 20003, 20013, 20023, etc.) | | location | . (base directory) | Location of the lambda functions handlers. | | refMap | {} | A mapping of resource resolutions for the Ref function | | getAttMap | {} | A mapping of resource resolutions for the GetAtt function | | importValueMap | {} | A mapping of resource resolutions for the ImportValue function | | functions | {} | A mapping of external functions for providing invoke url for external fucntions | | dynamoDb.endpoint | http://localhost:8000 | Dynamodb endpoint. Specify it if you're not using serverless-dynamodb-local. Otherwise, port is taken from dynamodb-local conf | | dynamoDb.region | localhost | Dynamodb region. Specify it if you're connecting to a remote Dynamodb intance. | | dynamoDb.accessKeyId | DEFAULT_ACCESS_KEY | AWS Access Key ID to access DynamoDB | | dynamoDb.secretAccessKey | DEFAULT_SECRET | AWS Secret Key to access DynamoDB | | dynamoDb.sessionToken | DEFAULT_ACCESS_TOKEEN | AWS Session Token to access DynamoDB, only if you have temporary security credentials configured on AWS | | dynamoDb.* | | You can add every configuration accepted by DynamoDB SDK | | rds.dbName | | Name of the database | | rds.dbHost | | Database host | | rds.dbDialect | | Database dialect. Possible values (mysql | postgres) | | rds.dbUsername | | Database username | | rds.dbPassword | | Database password | | rds.dbPort | | Database port | | watch | - *.graphql
- *.vtl | Array of glob patterns to watch for hot-reloading. |

Example:

custom:
  appsync-simulator:
    location: '.webpack/service' # use webpack build directory
    dynamoDb:
      endpoint: 'http://my-custom-dynamo:8000'

Hot-reloading

By default, the simulator will hot-relad when changes to *.graphql or *.vtl files are detected. Changes to *.yml files are not supported (yet? - this is a Serverless Framework limitation). You will need to restart the simulator each time you change yml files.

Hot-reloading relies on watchman. Make sure it is installed on your system.

You can change the files being watched with the watch option, which is then passed to watchman as the match expression.

e.g.

custom:
  appsync-simulator:
    watch:
      - ["match", "handlers/**/*.vtl", "wholename"] # => array is interpreted as the literal match expression
      - "*.graphql"                                 # => string like this is equivalent to `["match", "*.graphql"]`

Or you can opt-out by leaving an empty array or set the option to false

Note: Functions should not require hot-reloading, unless you are using a transpiler or a bundler (such as webpack, babel or typescript), un which case you should delegate hot-reloading to that instead.

Resource CloudFormation functions resolution

This plugin supports some resources resolution from the Ref, Fn::GetAtt and Fn::ImportValue functions in your yaml file. It also supports some other Cfn functions such as Fn::Join, Fb::Sub, etc.

Note: Under the hood, this features relies on the cfn-resolver-lib package. For more info on supported cfn functions, refer to the documentation

Basic usage

You can reference resources in your functions' environment variables (that will be accessible from your lambda functions) or datasource definitions. The plugin will automatically resolve them for you.

provider:
  environment:
    BUCKET_NAME:
      Ref: MyBucket # resolves to `my-bucket-name`

resources:
  Resources:
    MyDbTable:
      Type: AWS::DynamoDB::Table
      Properties:
        TableName: myTable
      ...
    MyBucket:
      Type: AWS::S3::Bucket
      Properties:
        BucketName: my-bucket-name
    ...

# in your appsync config
dataSources:
  - type: AMAZON_DYNAMODB
    name: dynamosource
    config:
      tableName:
        Ref: MyDbTable # resolves to `myTable`

Override (or mock) values

Sometimes, some references cannot be resolved, as they come from an Output from Cloudformation; or you might want to use mocked values in your local environment.

In those cases, you can define (or override) those values using the refMap, getAttMap and importValueMap options.

  • refMap takes a mapping of resource name to value pairs
  • getAttMap takes a mapping of resource name to attribute/values pairs
  • importValueMap takes a mapping of import name to values pairs

Example:

custom:
  appsync-simulator:
    refMap:
      # Override `MyDbTable` resolution from the previous example.
      MyDbTable: 'mock-myTable'
    getAttMap:
      # define ElasticSearchInstance DomainName
      ElasticSearchInstance:
        DomainEndpoint: 'localhost:9200'
    importValueMap:
      other-service-api-url: 'https://other.api.url.com/graphql'

# in your appsync config
dataSources:
  - type: AMAZON_ELASTICSEARCH
    name: elasticsource
    config:
      # endpoint resolves as 'http://localhost:9200'
      endpoint:
        Fn::Join:
          - ''
          - - https://
            - Fn::GetAtt:
                - ElasticSearchInstance
                - DomainEndpoint

Key-value mock notation

In some special cases you will need to use key-value mock nottation. Good example can be case when you need to include serverless stage value (${self:provider.stage}) in the import name.

This notation can be used with all mocks - refMap, getAttMap and importValueMap

provider:
  environment:
    FINISH_ACTIVITY_FUNCTION_ARN:
      Fn::ImportValue: other-service-api-${self:provider.stage}-url

custom:
  serverless-appsync-simulator:
    importValueMap:
      - key: other-service-api-${self:provider.stage}-url
        value: 'https://other.api.url.com/graphql'

Limitations

This plugin only tries to resolve the following parts of the yml tree:

  • provider.environment
  • functions[*].environment
  • custom.appSync

If you have the need of resolving others, feel free to open an issue and explain your use case.

For now, the supported resources to be automatically resovled by Ref: are:

  • DynamoDb tables
  • S3 Buckets

Feel free to open a PR or an issue to extend them as well.

External functions

When a function is not defined withing the current serverless file you can still call it by providing an invoke url which should point to a REST method. Make sure you specify "get" or "post" for the method. Default is "get", but you probably want "post".

custom:
  appsync-simulator:
    functions:
      addUser:
        url: http://localhost:3016/2015-03-31/functions/addUser/invocations
        method: post
      addPost:
        url: https://jsonplaceholder.typicode.com/posts
        method: post

Supported Resolver types

This plugin supports resolvers implemented by amplify-appsync-simulator, as well as custom resolvers.

From Aws Amplify:

  • NONE
  • AWS_LAMBDA
  • AMAZON_DYNAMODB
  • PIPELINE

Implemented by this plugin

  • AMAZON_ELASTIC_SEARCH
  • HTTP
  • RELATIONAL_DATABASE

Relational Database

Sample VTL for a create mutation

#set( $cols = [] )
#set( $vals = [] )
#foreach( $entry in $ctx.args.input.keySet() )
  #set( $regex = "([a-z])([A-Z]+)")
  #set( $replacement = "$1_$2")
  #set( $toSnake = $entry.replaceAll($regex, $replacement).toLowerCase() )
  #set( $discard = $cols.add("$toSnake") )
  #if( $util.isBoolean($ctx.args.input[$entry]) )
      #if( $ctx.args.input[$entry] )
        #set( $discard = $vals.add("1") )
      #else
        #set( $discard = $vals.add("0") )
      #end
  #else
      #set( $discard = $vals.add("'$ctx.args.input[$entry]'") )
  #end
#end
#set( $valStr = $vals.toString().replace("[","(").replace("]",")") )
#set( $colStr = $cols.toString().replace("[","(").replace("]",")") )
#if ( $valStr.substring(0, 1) != '(' )
  #set( $valStr = "($valStr)" )
#end
#if ( $colStr.substring(0, 1) != '(' )
  #set( $colStr = "($colStr)" )
#end
{
  "version": "2018-05-29",
  "statements":   ["INSERT INTO <name-of-table> $colStr VALUES $valStr", "SELECT * FROM    <name-of-table> ORDER BY id DESC LIMIT 1"]
}

Sample VTL for an update mutation

#set( $update = "" )
#set( $equals = "=" )
#foreach( $entry in $ctx.args.input.keySet() )
  #set( $cur = $ctx.args.input[$entry] )
  #set( $regex = "([a-z])([A-Z]+)")
  #set( $replacement = "$1_$2")
  #set( $toSnake = $entry.replaceAll($regex, $replacement).toLowerCase() )
  #if( $util.isBoolean($cur) )
      #if( $cur )
        #set ( $cur = "1" )
      #else
        #set ( $cur = "0" )
      #end
  #end
  #if ( $util.isNullOrEmpty($update) )
      #set($update = "$toSnake$equals'$cur'" )
  #else
      #set($update = "$update,$toSnake$equals'$cur'" )
  #end
#end
{
  "version": "2018-05-29",
  "statements":   ["UPDATE <name-of-table> SET $update WHERE id=$ctx.args.input.id", "SELECT * FROM <name-of-table> WHERE id=$ctx.args.input.id"]
}

Sample resolver for delete mutation

{
  "version": "2018-05-29",
  "statements":   ["UPDATE <name-of-table> set deleted_at=NOW() WHERE id=$ctx.args.id", "SELECT * FROM <name-of-table> WHERE id=$ctx.args.id"]
}

Sample mutation response VTL with support for handling AWSDateTime

#set ( $index = -1)
#set ( $result = $util.parseJson($ctx.result) )
#set ( $meta = $result.sqlStatementResults[1].columnMetadata)
#foreach ($column in $meta)
    #set ($index = $index + 1)
    #if ( $column["typeName"] == "timestamptz" )
        #set ($time = $result["sqlStatementResults"][1]["records"][0][$index]["stringValue"] )
        #set ( $nowEpochMillis = $util.time.parseFormattedToEpochMilliSeconds("$time.substring(0,19)+0000", "yyyy-MM-dd HH:mm:ssZ") )
        #set ( $isoDateTime = $util.time.epochMilliSecondsToISO8601($nowEpochMillis) )
        $util.qr( $result["sqlStatementResults"][1]["records"][0][$index].put("stringValue", "$isoDateTime") )
    #end
#end
#set ( $res = $util.parseJson($util.rds.toJsonString($util.toJson($result)))[1][0] )
#set ( $response = {} )
#foreach($mapKey in $res.keySet())
    #set ( $s = $mapKey.split("_") )
    #set ( $camelCase="" )
    #set ( $isFirst=true )
    #foreach($entry in $s)
        #if ( $isFirst )
          #set ( $first = $entry.substring(0,1) )
        #else
          #set ( $first = $entry.substring(0,1).toUpperCase() )
        #end
        #set ( $isFirst=false )
        #set ( $stringLength = $entry.length() )
        #set ( $remaining = $entry.substring(1, $stringLength) )
        #set ( $camelCase = "$camelCase$first$remaining" )
    #end
    $util.qr( $response.put("$camelCase", $res[$mapKey]) )
#end
$utils.toJson($response)

Using Variable Map

Variable map support is limited and does not differentiate numbers and strings data types, please inject them directly if needed.

Will be escaped properly: null, true, and false values.

{
  "version": "2018-05-29",
  "statements":   [
    "UPDATE <name-of-table> set deleted_at=NOW() WHERE id=:ID",
    "SELECT * FROM <name-of-table> WHERE id=:ID and unix_timestamp > $ctx.args.newerThan"
  ],
  variableMap: {
    ":ID": $ctx.args.id,
##    ":TIMESTAMP": $ctx.args.newerThan -- This will be handled as a string!!!
  }
}

Requires

Author: Serverless-appsync
Source Code: https://github.com/serverless-appsync/serverless-appsync-simulator 
License: MIT License

#serverless #sync #graphql 

Chesley Labadie

Chesley Labadie

1648972740

Generis: Versatile Go Code Generator

Generis

Versatile Go code generator.

Description

Generis is a lightweight code preprocessor adding the following features to the Go language :

  • Generics.
  • Free-form macros.
  • Conditional compilation.
  • HTML templating.
  • Allman style conversion.

Sample

package main;

// -- IMPORTS

import (
    "html"
    "io"
    "log"
    "net/http"
    "net/url"
    "strconv"
    );

// -- DEFINITIONS

#define DebugMode
#as true

// ~~

#define HttpPort
#as 8080

// ~~

#define WriteLine( {{text}} )
#as log.Println( {{text}} )

// ~~

#define local {{variable}} : {{type}};
#as var {{variable}} {{type}};

// ~~

#define DeclareStack( {{type}}, {{name}} )
#as
    // -- TYPES

    type {{name}}Stack struct
    {
        ElementArray []{{type}};
    }

    // -- INQUIRIES

    func ( stack * {{name}}Stack ) IsEmpty(
        ) bool
    {
        return len( stack.ElementArray ) == 0;
    }

    // -- OPERATIONS

    func ( stack * {{name}}Stack ) Push(
        element {{type}}
        )
    {
        stack.ElementArray = append( stack.ElementArray, element );
    }

    // ~~

    func ( stack * {{name}}Stack ) Pop(
        ) {{type}}
    {
        local
            element : {{type}};

        element = stack.ElementArray[ len( stack.ElementArray ) - 1 ];

        stack.ElementArray = stack.ElementArray[ : len( stack.ElementArray ) - 1 ];

        return element;
    }
#end

// ~~

#define DeclareStack( {{type}} )
#as DeclareStack( {{type}}, {{type:PascalCase}} )

// -- TYPES

DeclareStack( string )
DeclareStack( int32 )

// -- FUNCTIONS

func HandleRootPage(
    response_writer http.ResponseWriter,
    request * http.Request
    )
{
    local
        boolean : bool;
    local
        natural : uint;
    local
        integer : int;
    local
        real : float64;
    local
        escaped_html_text,
        escaped_url_text,
        text : string;
    local
        integer_stack : Int32Stack;

    boolean = true;
    natural = 10;
    integer = 20;
    real = 30.0;
    text = "text";
    escaped_url_text = "&escaped text?";
    escaped_html_text = "<escaped text/>";

    integer_stack.Push( 10 );
    integer_stack.Push( 20 );
    integer_stack.Push( 30 );

    #write response_writer
        <!DOCTYPE html>
        <html lang="en">
            <head>
                <meta charset="utf-8">
                <title><%= request.URL.Path %></title>
            </head>
            <body>
                <% if ( boolean ) { %>
                    <%= "URL : " + request.URL.Path %>
                    <br/>
                    <%@ natural %>
                    <%# integer %>
                    <%& real %>
                    <br/>
                    <%~ text %>
                    <%^ escaped_url_text %>
                    <%= escaped_html_text %>
                    <%= "<%% ignored %%>" %>
                    <%% ignored %%>
                <% } %>
                <br/>
                Stack :
                <br/>
                <% for !integer_stack.IsEmpty() { %>
                    <%# integer_stack.Pop() %>
                <% } %>
            </body>
        </html>
    #end
}

// ~~

func main()
{
    http.HandleFunc( "/", HandleRootPage );

    #if DebugMode
        WriteLine( "Listening on http://localhost:HttpPort" );
    #end

    log.Fatal(
        http.ListenAndServe( ":HttpPort", nil )
        );
}

Syntax

#define directive

Constants and generic code can be defined with the following syntax :

#define old code
#as new code

#define old code
#as
    new
    code
#end

#define
    old
    code
#as new code

#define
    old
    code
#as
    new
    code
#end

#define parameter

The #define directive can contain one or several parameters :

{{variable name}} : hierarchical code (with properly matching brackets and parentheses)
{{variable name#}} : statement code (hierarchical code without semicolon)
{{variable name$}} : plain code
{{variable name:boolean expression}} : conditional hierarchical code
{{variable name#:boolean expression}} : conditional statement code
{{variable name$:boolean expression}} : conditional plain code

They can have a boolean expression to require they match specific conditions :

HasText text
HasPrefix prefix
HasSuffix suffix
HasIdentifier text
false
true
!expression
expression && expression
expression || expression
( expression )

The #define directive must not start or end with a parameter.

#as parameter

The #as directive can use the value of the #define parameters :

{{variable name}}
{{variable name:filter function}}
{{variable name:filter function:filter function:...}}

Their value can be changed through one or several filter functions :

LowerCase
UpperCase
MinorCase
MajorCase
SnakeCase
PascalCase
CamelCase
RemoveComments
RemoveBlanks
PackStrings
PackIdentifiers
ReplacePrefix old_prefix new_prefix
ReplaceSuffix old_suffix new_suffix
ReplaceText old_text new_text
ReplaceIdentifier old_identifier new_identifier
AddPrefix prefix
AddSuffix suffix
RemovePrefix prefix
RemoveSuffix suffix
RemoveText text
RemoveIdentifier identifier

#if directive

Conditional code can be defined with the following syntax :

#if boolean expression
    #if boolean expression
        ...
    #else
        ...
    #end
#else
    #if boolean expression
        ...
    #else
        ...
    #end
#end

The boolean expression can use the following operators :

false
true
!expression
expression && expression
expression || expression
( expression )

#write directive

Templated HTML code can be sent to a stream writer using the following syntax :

#write writer expression
    <% code %>
    <%@ natural expression %>
    <%# integer expression %>
    <%& real expression %>
    <%~ text expression %>
    <%= escaped text expression %>
    <%! removed content %>
    <%% ignored tags %%>
#end

Limitations

  • There is no operator precedence in boolean expressions.
  • The --join option requires to end the statements with a semicolon.
  • The #writer directive is only available for the Go language.

Installation

Install the DMD 2 compiler (using the MinGW setup option on Windows).

Build the executable with the following command line :

dmd -m64 generis.d

Command line

generis [options]

Options

--prefix # : set the command prefix
--parse INPUT_FOLDER/ : parse the definitions of the Generis files in the input folder
--process INPUT_FOLDER/ OUTPUT_FOLDER/ : reads the Generis files in the input folder and writes the processed files in the output folder
--trim : trim the HTML templates
--join : join the split statements
--create : create the output folders if needed
--watch : watch the Generis files for modifications
--pause 500 : time to wait before checking the Generis files again
--tabulation 4 : set the tabulation space count
--extension .go : generate files with this extension

Examples

generis --process GS/ GO/

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder.

generis --process GS/ GO/ --create

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, creating the output folders if needed.

generis --process GS/ GO/ --create --watch

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, creating the output folders if needed and watching the Generis files for modifications.

generis --process GS/ GO/ --trim --join --create --watch

Reads the Generis files in the GS/ folder and writes Go files in the GO/ folder, trimming the HTML templates, joining the split statements, creating the output folders if needed and watching the Generis files for modifications.

Version

2.0

Author: Senselogic
Source Code: https://github.com/senselogic/GENERIS 
License: View license

#go #golang #code 

Hertha Mayer

Hertha Mayer

1595334123

Authentication In MEAN Stack - A Quick Guide

I consider myself an active StackOverflow user, despite my activity tends to vary depending on my daily workload. I enjoy answering questions with angular tag and I always try to create some working example to prove correctness of my answers.

To create angular demo I usually use either plunker or stackblitz or even jsfiddle. I like all of them but when I run into some errors I want to have a little bit more usable tool to undestand what’s going on.

Many people who ask questions on stackoverflow don’t want to isolate the problem and prepare minimal reproduction so they usually post all code to their questions on SO. They also tend to be not accurate and make a lot of mistakes in template syntax. To not waste a lot of time investigating where the error comes from I tried to create a tool that will help me to quickly find what causes the problem.

Angular demo runner
Online angular editor for building demo.
ng-run.com
<>

Let me show what I mean…

Template parser errors#

There are template parser errors that can be easy catched by stackblitz

It gives me some information but I want the error to be highlighted

#mean stack #angular 6 passport authentication #authentication in mean stack #full stack authentication #mean stack example application #mean stack login and registration angular 8 #mean stack login and registration angular 9 #mean stack tutorial #mean stack tutorial 2019 #passport.js

Kabanda Nat

Kabanda Nat

1624173495

15 Project Ideas for Front-End, Back-End, and Full-Stack Web Developers

The Color Guesser Game is a simple game where players have to guess the background color of a box on the page .The app starts by creating a series of boxes with different colors based on user input. Once the game begins, the color boxes are flipped over and their colors are hidden 
Music Playlist App
If you’ve ever thought of creating a combined playlist of songs that you and your friends think are cool , then this might be an interesting project idea for you .In this project, you can build a simple interface that allows you and anyone else to add a song to your playlist . Working on this project will deepen your understanding of DOM event handlers in JavaScript and in the framework, you are learning (React).
Number Guessing Game App
The numbers guessing game app is another interesting idea for those who want to expand their front-end development skills .

#web dev #project ideas #front-end #back-end #full-stack #web developers

Aria Barnes

Aria Barnes

1625490702

Is Full-Stack Developer A Vaccine For Startups?

There's a wise old saying: "Working with a full stack developer can lead to better technology solutions." And in recent years, this saying has proven to be true for many startups.

In the last few years, we have heard a lot about full-stack developers.

We know that a full-stack developer is a person who has complete knowledge of the different layers involved in application development. Whether you are dealing with the front or back end or working in the business layer, they take care of everything with ease.

But did you wonder why a full-stack developer is so important for a startup? 

This blog will answer all such queries. So let's get started.

The Demand for Full-Stack Developers

As per a development report published recently, it was seen that there had been a 206% increase in demand for full-stack developers from 2018 to 2020. This is because more companies seek multifaceted skills. 


Full-stack developers or a full-stack development company are able to take care of all the development needs of your project. So whether it's front-end or back-end development or enterprise layer development, they are competent to work on everything. You can always hire full-stack developers for your business needs.

What can a Full-Stack Developer Do?

In terms of software development, there are front-end developers and back-end developers. Front-end developers create the interface, while backend developers design the software. 

A full-stack developer can do everything. They take care of application design, server-side scripting, client-side coding, coding, administration, database creation, and any other project development needs.

The following are the responsibilities of a full stack developer that you hire:

  • Manage web development

  • Code applications and programs

  • Solve problems

  • Coordinate with other team members and developers

  • Think about testing techniques for web applications

In short, a full-stack developer has a strong understanding of the technologies that determine how a website looks, functions, and functions. The said developer must have a working knowledge of HTML, JavaScript, CSS, PHP, Angular, Ruby, MySQL, Node, MongoDB, Apache, etc. The knowledge to work with animations and design will add a bonus point to a candidate's portfolio.

Over time, the skills required for full-stack development have expanded and evolved. Long ago, the LAMP stack included Linux, Apache, MySQL, and PHP. It is more than MEAN and beyond today. 

Currently, a typical mean stack development service provides developers who can perform front-end development using JavaScript, HTML, CSS, and other JS frameworks; for the backend, they use Express and Node, and for databases, they follow MySQL and MongoDB.

Top Reasons to Hire Full-Stack Developers

  • Effective troubleshooting

When hiring a full-stack developer, companies are always looking for candidates who are capable of solving a problem. Full-stack developers are competent to handle all aspects of the project. They prove to be a practical solution for startups that are not willing to spend more money on many developers.

  • Wide range of technology skills

The main reason companies choose full-stack developers for their projects is their potential rather than their knowledge. Over time, companies teach them the skills they want them to have. In this way, in a few years, they learn different technological skills as the company expands.

  • Executive and management skills

Companies like to have people with business experience on board. A full-stack developer has the knowledge and expertise to work on the front-end, backend, and media architecture layers. This means that they are capable of performing better than an individual front-end or backend developer.

  • Economic

As full-stack developers can develop all aspects of a project, it is not necessary to form a team of experts. They will easily handle the project without help from anyone. This will save the right amount of money for the recruiting team.

  • Faster development process

Full-stack developers know different technologies, tools, and techniques. This means that when they take the project, they will be able to complete it faster. They will spend less time discussing and collaborating with the team on the project.

Benefits of Full-Stack Developers for Startups and Small Businesses

  • Established developers

Full-stack developers have enough experience to create outstanding features for the final product, which will be able to excite the market. They have the ability to build a complete product from scratch. If you want to gain some benefits from your product, you will have to collaborate with these experts. Remember that not all developers are capable of handling the project from a 360-degree perspective.

  • Versatility

A full-stack developer is able to work equally well on the front-end and the backend of a website or application. Front-end developers write code using JavaScript, HTML, and CSS, which are able to control the appearance of the solution and how it interacts with the browser and users. Backend developers write code that connects the website or application with other content management systems. A full-stack developer is capable of handling both tasks. They are focused on meeting customer expectations and finding solutions on their own.

 

  • Vast experience

Full-stack developers take on different web projects. This has helped them gain in-depth knowledge of various technologies and the experience to find quick solutions in web and application development. Such understanding and knowledge improve the performance of the project and its reception in the market.

  • The largest photograph

The main advantage of choosing a full-stack developer for your project is that they will come up with the complete structure of the project and offer their valuable input to the project as needed. Their services go beyond project development to maintain and optimize existing solutions.

  • Upgrades

Web design plays a crucial role in whether most people love or reject a website. Full-stack developers will make sure that the website is pretty user-friendly. They keep up with trends and technological innovations. To make sure their clients get the best interactive and responsive website, the developers implement intelligent features in their projects.

  • Troubleshooting issues

Full-stack developers have complete knowledge and experience of the different stages and aspects of website development. They are skilled enough to identify problems that may arise during the development of the project. They will propose long-term solutions to ensure that the website or application works optimally based on their findings.

  • All-inclusive

In addition to leading your web project and enabling enhancements to it, full-stack developers move to the level of representing your product to stakeholders or your company at conferences. They can move quickly from one operation to another with ease, streamlining the development process.

  • Economic

If you are on a tight budget but want to create a fantastic website, then you should consider hiring full developers for the job. You can even think about having a remote full-stack developer for the project. As such, a developer is capable of handling all aspects of project development; you won't have to hire different people for the job. This will save you a lot of money.

  • Delivery time

It will be easy for developers to share responsibilities among the team and coordinate with each other for better project progress. This will result in faster delivery of the project.

  • Project ownership

When you hire full-stack developers for your project, you can be sure that they will take care of everything. Such a developer will be able to develop MVP from start to finish. If you hire a full-stack developer in the middle of the project, even then, you'll find a way to join the flow seamlessly. Such a developer will work towards quality control of the design project.

 

 

Summing Up

So these were the advantages of hiring a full-stack developer. I hope you have noted the changes that a full-stack developer can bring to the table and in your company. However, working with a full-stack developer is the best way to work with a top full-stack development company in India.

It is a good idea that full-stack development companies bring to your projects are phenomenal and groundbreaking due to the expertise and experience that full-stack development companies bring to your projects.

If you have any other queries or suggestions, feel free to comment below.

Original source

#full stack developers #hire full stack developers #full stack development #mean stack development service #hire full stack developer india #hire full stack developer