Alein williams

1592631799

HP Printer Troubleshooting Guide +1-855-788-2810 Fix Problems

HP printer’s users commonly face the problem when their printer just refuses to print anything. This problem can arise due to various reasons ranging from connectivity issues to faulty configurations or drivers. If you are facing any such problem, the following HP Printer troubleshooting guide will help you get rid of your printer won’t print problem.

Go for basic troubleshooting

In case your HP printer stops working, the first thing to do id to check the status of the connection between your printer and your computer. Make sure that all your devices are connected properly to one another, and the network or the cable that you use to connect these devices is working.

You can also take a chance at restarting your HP printer. Turn it off for a couple of minutes, unplug the cordand leave it for a few minutes. Now, plug the cord to the printer and power it on. See if your problem is resolved.

Update or reinstall the required drivers
More often than not, printers show problem because of faulty drivers. You may be required to update or reinstall these drivers to fix your printing issue.

Set your printer to default

When you try to print something, your computer will automatically assign that printing task to the default printer unless you manually choose to do it with some other printer. So, your HP printer won’t be able to print anything if you have neither set it as your default printer nor select it as the printer to print.

If your HP printer is not set as default then follow these steps to make it your default printer:

  • Press Window key along with the R key, both at the same time. This will open the Run dialog box. Type Control Panel in the dialog box and hit Enter to open the Control Panel.
  • Select Devices and Printers from the Control Panel.
  • In the Printers section, right click on your HP printer logo and select Set as default printer. Click yes if prompted.
  • Now, you can see a tick below your HP printer This means that your printer is now set as default printer.
  • Cancel all printing jobs

Another common problem that leaves your printer not working is the stuck print queue. If there are failed print jobs in your print queue, then it may restrict the normal functioning of your printer. Clear all your print jobs to get your printer back to normal.

  • Go to Control Panel and open Devices and Printers.
  • Right click on your HP printerin the Printers section and select See what’s printing.
  • Open the Printer menu and select Open as Administrator.
  • Once again open the Printer menu and select Cancel All Documents.
  • When prompt window opens, Confirm your action.
  • Check your printer status

If the above mentioned troubleshooting methods do not work for you, then check for any hardware issue with your printer.

Make sure that your printer has enough paper, ink or toner, and it is not on paper jam.

Why My HP printer is Offline

That depends on what you mean by “go offline”.
If the machine itself loses network connectivity, you should troubleshoot the issue exactly like when any other network equipment loses connectivity:

  • Ping the printer from a PC to verify that it actually is offline.
  • Check cables.
  • Check the settings.
  • Check for duplicate IPs on the network.
  • Google for more network troubleshooting assistance

If you mean that Windows is reporting the printer as offline, it is just saying that it receives no status updates from the printer. This is a Windows/printer port communication issue and is rarely related to the printer it self.

I would recommend you either reinstall the driver or go in to the Printer Properties -> Ports and set up a new TCP/IP port with the IP address of the printer.

If the issue persists, something is likely blocking trafic on port 9100 on your network. This is often the case if the PC is connected to a wireless network and the printer is on a cabled network. Sometimes this can be solved in the accesspoint/router setup.

If you cannot solve the issue, you can work around it by selecting the newly created TCP/IP port, click the “Configure Port” button and from there disable the “SNMP Status Enable” checkbox. This will cause Windows to no longer attempt to monitor the status of the printer and it should therefor never report the printer as offline.So Whenever you are searhcing for my hp printer is offline its a serious issue and get online help asap for this problem

#hp #printer #troubleshooting #offline

What is GEEK

Buddha Community

HP Printer Troubleshooting Guide +1-855-788-2810 Fix Problems

Testing the cables is a common practice that must be followed first. It’s likely that the problem is actually due to loose connections or worn-out cables. Check that all cables are connected correctly and that the printer is switched on. If the cable stops working, you should try putting it into a different USB port on your device or removing it. If the PC is connected via Ethernet, double-check that the Ethernet port is operational and that the connection between the PC and the printer is safe. Make sure your printer is connected to your PC network if you’re using a wireless network. Additionally, make sure the printer is connected to a functioning wall outlet. Restart the Wi-Fi router if you’re using a wireless printer. The “HP Printer Offline Fix” problem may also be triggered by a Wi-Fi router that isn’t working properly.
HP Printer says Offline

A Wrapper for Sembast and SQFlite to Enable Easy

FHIR_DB

This is really just a wrapper around Sembast_SQFLite - so all of the heavy lifting was done by Alex Tekartik. I highly recommend that if you have any questions about working with this package that you take a look at Sembast. He's also just a super nice guy, and even answered a question for me when I was deciding which sembast version to use. As usual, ResoCoder also has a good tutorial.

I have an interest in low-resource settings and thus a specific reason to be able to store data offline. To encourage this use, there are a number of other packages I have created based around the data format FHIR. FHIR® is the registered trademark of HL7 and is used with the permission of HL7. Use of the FHIR trademark does not constitute endorsement of this product by HL7.

Using the Db

So, while not absolutely necessary, I highly recommend that you use some sort of interface class. This adds the benefit of more easily handling errors, plus if you change to a different database in the future, you don't have to change the rest of your app, just the interface.

I've used something like this in my projects:

class IFhirDb {
  IFhirDb();
  final ResourceDao resourceDao = ResourceDao();

  Future<Either<DbFailure, Resource>> save(Resource resource) async {
    Resource resultResource;
    try {
      resultResource = await resourceDao.save(resource);
    } catch (error) {
      return left(DbFailure.unableToSave(error: error.toString()));
    }
    return right(resultResource);
  }

  Future<Either<DbFailure, List<Resource>>> returnListOfSingleResourceType(
      String resourceType) async {
    List<Resource> resultList;
    try {
      resultList =
          await resourceDao.getAllSortedById(resourceType: resourceType);
    } catch (error) {
      return left(DbFailure.unableToObtainList(error: error.toString()));
    }
    return right(resultList);
  }

  Future<Either<DbFailure, List<Resource>>> searchFunction(
      String resourceType, String searchString, String reference) async {
    List<Resource> resultList;
    try {
      resultList =
          await resourceDao.searchFor(resourceType, searchString, reference);
    } catch (error) {
      return left(DbFailure.unableToObtainList(error: error.toString()));
    }
    return right(resultList);
  }
}

I like this because in case there's an i/o error or something, it won't crash your app. Then, you can call this interface in your app like the following:

final patient = Patient(
    resourceType: 'Patient',
    name: [HumanName(text: 'New Patient Name')],
    birthDate: Date(DateTime.now()),
);

final saveResult = await IFhirDb().save(patient);

This will save your newly created patient to the locally embedded database.

IMPORTANT: this database will expect that all previously created resources have an id. When you save a resource, it will check to see if that resource type has already been stored. (Each resource type is saved in it's own store in the database). It will then check if there is an ID. If there's no ID, it will create a new one for that resource (along with metadata on version number and creation time). It will save it, and return the resource. If it already has an ID, it will copy the the old version of the resource into a _history store. It will then update the metadata of the new resource and save that version into the appropriate store for that resource. If, for instance, we have a previously created patient:

{
    "resourceType": "Patient",
    "id": "fhirfli-294057507-6811107",
    "meta": {
        "versionId": "1",
        "lastUpdated": "2020-10-16T19:41:28.054369Z"
    },
    "name": [
        {
            "given": ["New"],
            "family": "Patient"
        }
    ],
    "birthDate": "2020-10-16"
}

And we update the last name to 'Provider'. The above version of the patient will be kept in _history, while in the 'Patient' store in the db, we will have the updated version:

{
    "resourceType": "Patient",
    "id": "fhirfli-294057507-6811107",
    "meta": {
        "versionId": "2",
        "lastUpdated": "2020-10-16T19:45:07.316698Z"
    },
    "name": [
        {
            "given": ["New"],
            "family": "Provider"
        }
    ],
    "birthDate": "2020-10-16"
}

This way we can keep track of all previous version of all resources (which is obviously important in medicine).

For most of the interactions (saving, deleting, etc), they work the way you'd expect. The only difference is search. Because Sembast is NoSQL, we can search on any of the fields in a resource. If in our interface class, we have the following function:

  Future<Either<DbFailure, List<Resource>>> searchFunction(
      String resourceType, String searchString, String reference) async {
    List<Resource> resultList;
    try {
      resultList =
          await resourceDao.searchFor(resourceType, searchString, reference);
    } catch (error) {
      return left(DbFailure.unableToObtainList(error: error.toString()));
    }
    return right(resultList);
  }

You can search for all immunizations of a certain patient:

searchFunction(
        'Immunization', 'patient.reference', 'Patient/$patientId');

This function will search through all entries in the 'Immunization' store. It will look at all 'patient.reference' fields, and return any that match 'Patient/$patientId'.

The last thing I'll mention is that this is a password protected db, using AES-256 encryption (although it can also use Salsa20). Anytime you use the db, you have the option of using a password for encryption/decryption. Remember, if you setup the database using encryption, you will only be able to access it using that same password. When you're ready to change the password, you will need to call the update password function. If we again assume we created a change password method in our interface, it might look something like this:

class IFhirDb {
  IFhirDb();
  final ResourceDao resourceDao = ResourceDao();
  ...
    Future<Either<DbFailure, Unit>> updatePassword(String oldPassword, String newPassword) async {
    try {
      await resourceDao.updatePw(oldPassword, newPassword);
    } catch (error) {
      return left(DbFailure.unableToUpdatePassword(error: error.toString()));
    }
    return right(Unit);
  }

You don't have to use a password, and in that case, it will save the db file as plain text. If you want to add a password later, it will encrypt it at that time.

General Store

After using this for a while in an app, I've realized that it needs to be able to store data apart from just FHIR resources, at least on occasion. For this, I've added a second class for all versions of the database called GeneralDao. This is similar to the ResourceDao, but fewer options. So, in order to save something, it would look like this:

await GeneralDao().save('password', {'new':'map'});
await GeneralDao().save('password', {'new':'map'}, 'key');

The difference between these two options is that the first one will generate a key for the map being stored, while the second will store the map using the key provided. Both will return the key after successfully storing the map.

Other functions available include:

// deletes everything in the general store
await GeneralDao().deleteAllGeneral('password'); 

// delete specific entry
await GeneralDao().delete('password','key'); 

// returns map with that key
await GeneralDao().find('password', 'key'); 

FHIR® is a registered trademark of Health Level Seven International (HL7) and its use does not constitute an endorsement of products by HL7®

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add fhir_db

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:
  fhir_db: ^0.4.3

Alternatively, your editor might support or flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:fhir_db/dstu2.dart';
import 'package:fhir_db/dstu2/fhir_db.dart';
import 'package:fhir_db/dstu2/general_dao.dart';
import 'package:fhir_db/dstu2/resource_dao.dart';
import 'package:fhir_db/encrypt/aes.dart';
import 'package:fhir_db/encrypt/salsa.dart';
import 'package:fhir_db/r4.dart';
import 'package:fhir_db/r4/fhir_db.dart';
import 'package:fhir_db/r4/general_dao.dart';
import 'package:fhir_db/r4/resource_dao.dart';
import 'package:fhir_db/r5.dart';
import 'package:fhir_db/r5/fhir_db.dart';
import 'package:fhir_db/r5/general_dao.dart';
import 'package:fhir_db/r5/resource_dao.dart';
import 'package:fhir_db/stu3.dart';
import 'package:fhir_db/stu3/fhir_db.dart';
import 'package:fhir_db/stu3/general_dao.dart';
import 'package:fhir_db/stu3/resource_dao.dart'; 

example/lib/main.dart

import 'package:fhir/r4.dart';
import 'package:fhir_db/r4.dart';
import 'package:flutter/material.dart';
import 'package:test/test.dart';

Future<void> main() async {
  WidgetsFlutterBinding.ensureInitialized();

  final resourceDao = ResourceDao();

  // await resourceDao.updatePw('newPw', null);
  await resourceDao.deleteAllResources(null);

  group('Playing with passwords', () {
    test('Playing with Passwords', () async {
      final patient = Patient(id: Id('1'));

      final saved = await resourceDao.save(null, patient);

      await resourceDao.updatePw(null, 'newPw');
      final search1 = await resourceDao.find('newPw',
          resourceType: R4ResourceType.Patient, id: Id('1'));
      expect(saved, search1[0]);

      await resourceDao.updatePw('newPw', 'newerPw');
      final search2 = await resourceDao.find('newerPw',
          resourceType: R4ResourceType.Patient, id: Id('1'));
      expect(saved, search2[0]);

      await resourceDao.updatePw('newerPw', null);
      final search3 = await resourceDao.find(null,
          resourceType: R4ResourceType.Patient, id: Id('1'));
      expect(saved, search3[0]);

      await resourceDao.deleteAllResources(null);
    });
  });

  final id = Id('12345');
  group('Saving Things:', () {
    test('Save Patient', () async {
      final humanName = HumanName(family: 'Atreides', given: ['Duke']);
      final patient = Patient(id: id, name: [humanName]);
      final saved = await resourceDao.save(null, patient);

      expect(saved.id, id);

      expect((saved as Patient).name?[0], humanName);
    });

    test('Save Organization', () async {
      final organization = Organization(id: id, name: 'FhirFli');
      final saved = await resourceDao.save(null, organization);

      expect(saved.id, id);

      expect((saved as Organization).name, 'FhirFli');
    });

    test('Save Observation1', () async {
      final observation1 = Observation(
        id: Id('obs1'),
        code: CodeableConcept(text: 'Observation #1'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save(null, observation1);

      expect(saved.id, Id('obs1'));

      expect((saved as Observation).code.text, 'Observation #1');
    });

    test('Save Observation1 Again', () async {
      final observation1 = Observation(
          id: Id('obs1'),
          code: CodeableConcept(text: 'Observation #1 - Updated'));
      final saved = await resourceDao.save(null, observation1);

      expect(saved.id, Id('obs1'));

      expect((saved as Observation).code.text, 'Observation #1 - Updated');

      expect(saved.meta?.versionId, Id('2'));
    });

    test('Save Observation2', () async {
      final observation2 = Observation(
        id: Id('obs2'),
        code: CodeableConcept(text: 'Observation #2'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save(null, observation2);

      expect(saved.id, Id('obs2'));

      expect((saved as Observation).code.text, 'Observation #2');
    });

    test('Save Observation3', () async {
      final observation3 = Observation(
        id: Id('obs3'),
        code: CodeableConcept(text: 'Observation #3'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save(null, observation3);

      expect(saved.id, Id('obs3'));

      expect((saved as Observation).code.text, 'Observation #3');
    });
  });

  group('Finding Things:', () {
    test('Find 1st Patient', () async {
      final search = await resourceDao.find(null,
          resourceType: R4ResourceType.Patient, id: id);
      final humanName = HumanName(family: 'Atreides', given: ['Duke']);

      expect(search.length, 1);

      expect((search[0] as Patient).name?[0], humanName);
    });

    test('Find 3rd Observation', () async {
      final search = await resourceDao.find(null,
          resourceType: R4ResourceType.Observation, id: Id('obs3'));

      expect(search.length, 1);

      expect(search[0].id, Id('obs3'));

      expect((search[0] as Observation).code.text, 'Observation #3');
    });

    test('Find All Observations', () async {
      final search = await resourceDao.getResourceType(
        null,
        resourceTypes: [R4ResourceType.Observation],
      );

      expect(search.length, 3);

      final idList = [];
      for (final obs in search) {
        idList.add(obs.id.toString());
      }

      expect(idList.contains('obs1'), true);

      expect(idList.contains('obs2'), true);

      expect(idList.contains('obs3'), true);
    });

    test('Find All (non-historical) Resources', () async {
      final search = await resourceDao.getAll(null);

      expect(search.length, 5);
      final patList = search.toList();
      final orgList = search.toList();
      final obsList = search.toList();
      patList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Patient);
      orgList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Organization);
      obsList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Observation);

      expect(patList.length, 1);

      expect(orgList.length, 1);

      expect(obsList.length, 3);
    });
  });

  group('Deleting Things:', () {
    test('Delete 2nd Observation', () async {
      await resourceDao.delete(
          null, null, R4ResourceType.Observation, Id('obs2'), null, null);

      final search = await resourceDao.getResourceType(
        null,
        resourceTypes: [R4ResourceType.Observation],
      );

      expect(search.length, 2);

      final idList = [];
      for (final obs in search) {
        idList.add(obs.id.toString());
      }

      expect(idList.contains('obs1'), true);

      expect(idList.contains('obs2'), false);

      expect(idList.contains('obs3'), true);
    });

    test('Delete All Observations', () async {
      await resourceDao.deleteSingleType(null,
          resourceType: R4ResourceType.Observation);

      final search = await resourceDao.getAll(null);

      expect(search.length, 2);

      final patList = search.toList();
      final orgList = search.toList();
      patList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Patient);
      orgList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Organization);

      expect(patList.length, 1);

      expect(patList.length, 1);
    });

    test('Delete All Resources', () async {
      await resourceDao.deleteAllResources(null);

      final search = await resourceDao.getAll(null);

      expect(search.length, 0);
    });
  });

  group('Password - Saving Things:', () {
    test('Save Patient', () async {
      await resourceDao.updatePw(null, 'newPw');
      final humanName = HumanName(family: 'Atreides', given: ['Duke']);
      final patient = Patient(id: id, name: [humanName]);
      final saved = await resourceDao.save('newPw', patient);

      expect(saved.id, id);

      expect((saved as Patient).name?[0], humanName);
    });

    test('Save Organization', () async {
      final organization = Organization(id: id, name: 'FhirFli');
      final saved = await resourceDao.save('newPw', organization);

      expect(saved.id, id);

      expect((saved as Organization).name, 'FhirFli');
    });

    test('Save Observation1', () async {
      final observation1 = Observation(
        id: Id('obs1'),
        code: CodeableConcept(text: 'Observation #1'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save('newPw', observation1);

      expect(saved.id, Id('obs1'));

      expect((saved as Observation).code.text, 'Observation #1');
    });

    test('Save Observation1 Again', () async {
      final observation1 = Observation(
          id: Id('obs1'),
          code: CodeableConcept(text: 'Observation #1 - Updated'));
      final saved = await resourceDao.save('newPw', observation1);

      expect(saved.id, Id('obs1'));

      expect((saved as Observation).code.text, 'Observation #1 - Updated');

      expect(saved.meta?.versionId, Id('2'));
    });

    test('Save Observation2', () async {
      final observation2 = Observation(
        id: Id('obs2'),
        code: CodeableConcept(text: 'Observation #2'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save('newPw', observation2);

      expect(saved.id, Id('obs2'));

      expect((saved as Observation).code.text, 'Observation #2');
    });

    test('Save Observation3', () async {
      final observation3 = Observation(
        id: Id('obs3'),
        code: CodeableConcept(text: 'Observation #3'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save('newPw', observation3);

      expect(saved.id, Id('obs3'));

      expect((saved as Observation).code.text, 'Observation #3');
    });
  });

  group('Password - Finding Things:', () {
    test('Find 1st Patient', () async {
      final search = await resourceDao.find('newPw',
          resourceType: R4ResourceType.Patient, id: id);
      final humanName = HumanName(family: 'Atreides', given: ['Duke']);

      expect(search.length, 1);

      expect((search[0] as Patient).name?[0], humanName);
    });

    test('Find 3rd Observation', () async {
      final search = await resourceDao.find('newPw',
          resourceType: R4ResourceType.Observation, id: Id('obs3'));

      expect(search.length, 1);

      expect(search[0].id, Id('obs3'));

      expect((search[0] as Observation).code.text, 'Observation #3');
    });

    test('Find All Observations', () async {
      final search = await resourceDao.getResourceType(
        'newPw',
        resourceTypes: [R4ResourceType.Observation],
      );

      expect(search.length, 3);

      final idList = [];
      for (final obs in search) {
        idList.add(obs.id.toString());
      }

      expect(idList.contains('obs1'), true);

      expect(idList.contains('obs2'), true);

      expect(idList.contains('obs3'), true);
    });

    test('Find All (non-historical) Resources', () async {
      final search = await resourceDao.getAll('newPw');

      expect(search.length, 5);
      final patList = search.toList();
      final orgList = search.toList();
      final obsList = search.toList();
      patList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Patient);
      orgList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Organization);
      obsList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Observation);

      expect(patList.length, 1);

      expect(orgList.length, 1);

      expect(obsList.length, 3);
    });
  });

  group('Password - Deleting Things:', () {
    test('Delete 2nd Observation', () async {
      await resourceDao.delete(
          'newPw', null, R4ResourceType.Observation, Id('obs2'), null, null);

      final search = await resourceDao.getResourceType(
        'newPw',
        resourceTypes: [R4ResourceType.Observation],
      );

      expect(search.length, 2);

      final idList = [];
      for (final obs in search) {
        idList.add(obs.id.toString());
      }

      expect(idList.contains('obs1'), true);

      expect(idList.contains('obs2'), false);

      expect(idList.contains('obs3'), true);
    });

    test('Delete All Observations', () async {
      await resourceDao.deleteSingleType('newPw',
          resourceType: R4ResourceType.Observation);

      final search = await resourceDao.getAll('newPw');

      expect(search.length, 2);

      final patList = search.toList();
      final orgList = search.toList();
      patList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Patient);
      orgList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Organization);

      expect(patList.length, 1);

      expect(patList.length, 1);
    });

    test('Delete All Resources', () async {
      await resourceDao.deleteAllResources('newPw');

      final search = await resourceDao.getAll('newPw');

      expect(search.length, 0);

      await resourceDao.updatePw('newPw', null);
    });
  });
} 

Download Details:

Author: MayJuun

Source Code: https://github.com/MayJuun/fhir/tree/main/fhir_db

#sqflite  #dart  #flutter 

Alein williams

1592631799

HP Printer Troubleshooting Guide +1-855-788-2810 Fix Problems

HP printer’s users commonly face the problem when their printer just refuses to print anything. This problem can arise due to various reasons ranging from connectivity issues to faulty configurations or drivers. If you are facing any such problem, the following HP Printer troubleshooting guide will help you get rid of your printer won’t print problem.

Go for basic troubleshooting

In case your HP printer stops working, the first thing to do id to check the status of the connection between your printer and your computer. Make sure that all your devices are connected properly to one another, and the network or the cable that you use to connect these devices is working.

You can also take a chance at restarting your HP printer. Turn it off for a couple of minutes, unplug the cordand leave it for a few minutes. Now, plug the cord to the printer and power it on. See if your problem is resolved.

Update or reinstall the required drivers
More often than not, printers show problem because of faulty drivers. You may be required to update or reinstall these drivers to fix your printing issue.

Set your printer to default

When you try to print something, your computer will automatically assign that printing task to the default printer unless you manually choose to do it with some other printer. So, your HP printer won’t be able to print anything if you have neither set it as your default printer nor select it as the printer to print.

If your HP printer is not set as default then follow these steps to make it your default printer:

  • Press Window key along with the R key, both at the same time. This will open the Run dialog box. Type Control Panel in the dialog box and hit Enter to open the Control Panel.
  • Select Devices and Printers from the Control Panel.
  • In the Printers section, right click on your HP printer logo and select Set as default printer. Click yes if prompted.
  • Now, you can see a tick below your HP printer This means that your printer is now set as default printer.
  • Cancel all printing jobs

Another common problem that leaves your printer not working is the stuck print queue. If there are failed print jobs in your print queue, then it may restrict the normal functioning of your printer. Clear all your print jobs to get your printer back to normal.

  • Go to Control Panel and open Devices and Printers.
  • Right click on your HP printerin the Printers section and select See what’s printing.
  • Open the Printer menu and select Open as Administrator.
  • Once again open the Printer menu and select Cancel All Documents.
  • When prompt window opens, Confirm your action.
  • Check your printer status

If the above mentioned troubleshooting methods do not work for you, then check for any hardware issue with your printer.

Make sure that your printer has enough paper, ink or toner, and it is not on paper jam.

Why My HP printer is Offline

That depends on what you mean by “go offline”.
If the machine itself loses network connectivity, you should troubleshoot the issue exactly like when any other network equipment loses connectivity:

  • Ping the printer from a PC to verify that it actually is offline.
  • Check cables.
  • Check the settings.
  • Check for duplicate IPs on the network.
  • Google for more network troubleshooting assistance

If you mean that Windows is reporting the printer as offline, it is just saying that it receives no status updates from the printer. This is a Windows/printer port communication issue and is rarely related to the printer it self.

I would recommend you either reinstall the driver or go in to the Printer Properties -> Ports and set up a new TCP/IP port with the IP address of the printer.

If the issue persists, something is likely blocking trafic on port 9100 on your network. This is often the case if the PC is connected to a wireless network and the printer is on a cabled network. Sometimes this can be solved in the accesspoint/router setup.

If you cannot solve the issue, you can work around it by selecting the newly created TCP/IP port, click the “Configure Port” button and from there disable the “SNMP Status Enable” checkbox. This will cause Windows to no longer attempt to monitor the status of the printer and it should therefor never report the printer as offline.So Whenever you are searhcing for my hp printer is offline its a serious issue and get online help asap for this problem

#hp #printer #troubleshooting #offline

Broris Holt

Broris Holt

1623333715

How to Fix the Error If "HP Printer is in Error State”?

“HP printer is in an error state” this error generally flashes on screen when HP Printer user tries to connect Printer to the device or print from the device. But this is not the only reason behind HP printer is in error state message or error code, It can also be caused by changes in software, such as Windows Update, that lead to an increase in communication between your system and the attached printer.

However, if you are looking for some quick method to resolve HP Printer in Error State then you should need to have a look at the below-explained tips: How do I get my HP Printer out of error state?

What do you do if Your HP Printer is in Error State?

Method 1: Run troubleshooter.

Method 2: Check Wi-Fi or Cable make sure any other cables are not connected to the printer as well.

Method 3: Check if there are any new updates on software.

Method 4: Make sure that your printer should be directly connected to the wall outlet and not to any surge protectors.

Method 5: If the printer is in Offline state, follow the below steps to make it Online.

  1. Click Windows + X, go to Control Panel and click on Devices and printers.
  2. Click Printer.
  3. If the Printer is offline, it shows “Offline” status. If the Printer is online it shows “Ready”.
  4. If the Printer is offline, set it to online.
  5. Right-click on the printer and select “Use Printer Online”.
  6. The display should change to ready when the printer is set to online.

Method 6: Download HP Print and Scan Doctor software to resolve the problem of the printer drivers

Method 7: If the problem still persists then reinstall the printer driver.

Method 8: Check Your Connection And Restart Your Devices:

Windows 10 user can also fix this issue in short time of span look here for detailed method to fix HP Printer Error State Windows 10.

#hp printer is in an error state #hp printer is in error state #printer in error state hp #printer is in an error state hp #hp printer in error state

Error Code

1618305449

Follow & Fix HP Printer Driver Install Error $ 1603 Effortlessly

This is image title
The HP is an international brand and used by millions of users around the world to get amazing prints and printers are not the only things that HP is popular for. However, the HP printers are simply awesome and work amazingly for everyone. The users of the HP printers can choose the printers to form the wide range of the printers the HP offer for the users, but sometimes while Install HP Printer Driver, the users come across a fatal error 1603.

About HP Printer Error 1603:

The HP Printer Install Error 1603 is the error that interrupts the users of the HP printers when they are installing software of the HP printers on the Windows OS and the Windows is trying to install more than one program at one time. The users have no option other than resolving the issue so that they can use the HP printer without any delay.

Here are the Easiest Steps To Fix HP Printer Driver Install Error 1603:

Given here are the quick steps in which you can resolve HP Error Code 1603 instantly.

  1.   The best way to eradicate this error code is to uninstall the driver. After a while, install it again to make it function well. Here are the steps to do so.
    
  2.   First of all, sign in the administrator mode, and then search for the Control panel.
    
  3.   When you open the control panel, you will look an option there named Add or delete programs. In this option, you’ve to look for the all over history of your printer.
    
  4.   When you select your entry, right click on it. Now it is the time to uninstall the driver. After uninstalling it, give a restart.
    
  5.   Now, look for your HP printer driver and install it again for the smooth work of the printer.
    
  6.   If you run a troubleshooter, then it will help you to resolve your issue immediately. The best is to run a Hardware Troubleshooter. Here are the steps to know how to run it.
    
  7.   On your computer, go to the control panel. There you will look an option to view for large icons.
    
  8.   Now, you have to for the troubleshooting. Open it and there is an option for hardware and sound. Select it.
    
  9.   When you open that folder, an option to setup a device will be there. Hit it. Then you will look a lot of instructions on your screen, follow all those to run a troubleshooter.
    

The next step is to run a printer driver in a simple mode

  1.   To run the printer fleetly, would like to} need the newest printer driver. Install it to your printer to run it effectively.
    
  2.   After putting in the updated printer driver, do a right click on the setup file. when doing therefore, you'll see the properties choice there.
    
  3.   When you click on the properties tab, AN choice of compatibility is there. Click thereon. enable it to run in a very compatibility manner. once you did it, it's higher to restart your system to implement all the specified changes. Now, check if the error is mounted or not.
    

Resolve HP Driver Install Error 1603 with the assistance of system

  1.   You will see the safety tab on the device home screen. therein tab, AN choice of Add are there. Click thereon.
    
  2.   After clicking the Add choice, AN choice can seem, termed Name. Click thereon. At the time you click it, another choice of Add are there. Hit it afterwards click on the OK button.
    
  3.   When you click the ok button, AN choice of permissions can crop up. Hit the enable choice, afterwards, click Full management and in conclusion, click on the Advanced tab.
    
  4.   Now, click on all the choices that return up with a box that you simply ought to tick by touching thereon box.
    
  5.   This checking mark isn't for all the software users, if you access Windows XP, you'll be simply asked to hit the OK button.
    
  6.   When you do all the higher than procedures, a box can seem on your screen wherever it'll raise you to click affirmative.
    
  7.   The installer package that has a slip, you would like to double-click thereon.
    

Dial Error Code Expert Toll-Free Number for Instant Assistance:

If the problem is still there than the user needs to temporarily disable the services and then reinstall the HP software. When the HP software is installed once again, then enable all the services that user disabled before. The user needs to contact experts at HP Support Assistance Number +1-866-231-0111 if the problem is still there.
Source: https://sites.google.com/view/resetchangeverizonmailpasswod/blogs/hp-printer-driver-install-error-1603

#hp printer driver install error 1603 #hp printer error 1603 #hp printer driver install errors #install hp printer driver, #hp support assistance

Best Review

1629825646

Design Beast Review & OTO Link

Design Beast Review & OTOs + $20k Bonuses

CHECK BONUSES & GRAB IT AT: https://bit.ly/3yhtcqi

Welcome to my Design Beast Review A Very warm welcome to my DesignBeast Review Here You Will Find Honest Opinion About The Design Beast Whether It is A Right Fit For You or not also I Have Covered All Working processes of DesignBeast, Live Video Demo, features Pros & Cons & All Design Beast OTO details.

Govind Rana Here Stay Till the End Of This Review I Have included $20k Bonuses At the end Of DesignBeast Review

DesignBeast Review – World finest graphic designing & animation software that will come into existence in some days. If you are searching for DesignBeast Review then this is the right platform to get in-depth information and the truth for Design Beast Review. An AI-based designing software that enables the 3D designing technology to you.

I am pretty much excited to share my point of view about the design beast. and this is because I want to meet you to the high technology graphics software.

This software is going to launch on 26 Aug. 2021 by the very famous vendor Paul Ponna and this time he is launching is 2 years of efforts on this amazing app. So do believe me without any doubt, here I only share the actual facts for Designbeast Review.

At this time the limited information is available on the web so I have included the creator of DesignBeast, Paul Ponna’s previous launches, what is DesignBeast, features & benefits, examples, who will best fit for this app, pros & cons, included with a huge bonuses.

Discount will be rolling out from 26th August

(fingers crossed till its launch because it is the launch beyond expectations)

Design Beast Review – Overview

  • Creator: Paul Ponna
  • Product Name: DesignBeast
  • Launch Date – 2021-Aug-24
  • Launch Timing – 11:00 EDT
  • Pricing – $67
  • Official Website – Visit
  • Money-Back Guarantee- Information Not Available
  • Category – Graphic Designing
  • Training – Yes, Available
  • Bonuses – Techevoke Special Bonuses Available

About Paul Ponna the vendor & Creator of DesignBeast

Paul Ponna is an entrepreneur and a digital geek in the internet marketing niche. His previous launches were hit the market products and were evergreen. No comparison of his products because he knows what is a need in today’s market and how online marketers will get benefited from online technologies.

So let’s have a look at Paul Ponna’s previous hits in the saas industry.

  1. DoodleMaker – This is the doodle video maker and the popular software on JVZoo that is the biggest launch in the history of internet marketing software. With a doodle maker, you can create studio-quality doodle videos with this application.
  2. VideoCreator – A readymade video editing app that is more authentic than existing video editing software. No more templates creation is required and no extra efforts to make and you can make exciting effects with videocreator.
  3. There is more software that has been launched by Paul Ponna…
  • DoodleMaker
  • Avatar Builder
  • VideoCreator
  • DesignBeast (available on 26th Aug)

Paul Ponna is a tech entrepreneur and he was started his journey from his 18 and with a website and hosting spending only $20. And he is a millionaire and frequently launches products that are really amazing and useful.

So not further delays let come to the designbeast review and let’s talk about what will be this software and how can you get benefited from this.

What is Design Beast?

Design beast is a software that comes with 6 world-class designing technology, and with those 6 modules, you can fulfill your graphics needs in just 1 price tag.

DesignBeast is a software that is responsible for multipurpose designs and better technology including these below-mentioned modules.

  1. Design Automation App #1– All in One Design and Mockup Engine
  2. Design Automation App #1– 3D Live Motion Photos
  3. Design Automation App #1– Magic Object Remover
  4. Design Automation App #1– 1-Click Background Removal
  5. Design Automation App #1– Slick Image Editor
  6. Design Automation App #1– AI Logo Creator

This is app bundle is fully loaded with advanced graphics features that are essential for making high-quality posts, infographics, motion pictures, 3D banners, and more.

Here are all modules explanations of DesignBeast

So this is clear this app has various technologies that are responsible for advanced editing and professional graphical designs. So here is the module’s explanation.

  1. All in One Design and mockup Engine

This is a designs library, not an ordinary image or premade design library. All elements are customizable and you can create any of your imagination with this design and mockup engine.

7000+ ready-to-use customizable designs and mockups are available in this module. Just head over to the DesignBeast software and you will get the professional DFY designs and mockups for your graphics need.

There are for all social apps, means available in various sizes.

2. 3D Live Motion Photos

Now you can convert a still, boring photo to a live, 3D effect photo with the A.I. technology of DesignBeast. With this effect, you can engage with your audience in a more effective manner.

And you all know that a moving object with a visual effect is 10x more engaging than an ordinary graphical image. with this technology, you can grab the attention of your customers and get more clicks on your sales platform.

3. Magic Object Removal Tool

Most of the time we need to remove some object or any person from any of the selected images and this module will give you access to select the required object or person and the remove that thing is just one click.

The feature Paul Ponna offers in his software is rarely available on any other software. With only one click the magic happens and the object will be removed.

4. 1-Click Background Removal

Because the software has technology that is based on AI and Machine Learning. So it auto-detects the edges and objects in your photos and automatically erases the background from any photo.

You don’t need to make extra effects just select the 1 click background removal option and click on the image background and it will vanish within seconds.

5. Slick Image Editor

This has the multi-feature of basic editing for any photo. Just like edit, crop, short, effects, blur, and more. You don’t need to go for different apps to perform different tasks every time.

You can convert any still normal photo to a high-class visual and ready-to-use, ready-to-print photo with this module.

6. Artificial Intelligence Logo Creator

An AI logo creator, not just a free tool that is available in the online market but it is quite effective and useful for you to generate any kind of logo. You can now bulk-create 50 logo variations for any brand in 3 easy steps.

All designs are fully customizable, also a single object is customizable with this app.

How DesignBeast will fire in the saas market?

In this section of DesignBeast Review, I am sharing its popularity, hype, and the vendor name-fame with you, so that you can evaluate its worth.

Just because you need a better, time-saving, authentic, graphic designing and animation software that will fulfill your professional graphics need for online marketing.

Because paul Ponna is a tech entrepreneur and he knows what is write to tab the market and what should be the next useful tool for every marketer.

DesignBeast is now going to be a popular one from the software list of its vendor. No matter what competitors of DesignBeast will say about this software. But as a consumer and a digital marketer, I am pretty much excited for its official launch.

DesignBeast Features & Benefits

If you want to create designs for Social media, websites, e-commerce sites, local businesses, promos, and advertising then focus on the features & benefits of DesignBeast Review, so that you can evaluate its actual strength.

 A.I. & Machine Learning Technology

This is the platform that suggests automatically the designs, objects, effects & more things that are based on your needs and the design frame you choose.

Automate design tasks with machine learning and artificial intelligence to leapfrog your competition and maximize revenues.

 6 Apps in the Price of One

There is no comparison of this app in the online market because the bundle of 6 apps and those apps are highly authentic useful in today’s competitive marketing world.

You can replace multiple graphics apps from one that is DesignBeast and you need to replace it if you want to save your money and time.

 Multilingual

This app is available in multi-languages, and with this feature, it doesn’t matter from where you are in this world.

It enables you to sell your service towards the globe and also give you the access to create graphical content in your local language.

 Commercial and resell rights available

Commercial licensing brings you to another stage of selling your services to clients. Now you can freely sell all generated content to your clients in the market. Also charge extra fees according to your skills and set your service on commercial platforms.

 Copywrite free assets and resources

Assets that are really expensive and everyone even I needs to purchase from the online market and those services are very expensive for all of us. But now all are available at one place that is design beast, you will get premium royalty-free images, icons, backgrounds & animations.

 Save Time and money

You can build world-class designs in minutes and all designs are professional, in starting you need to learn some lessons and practice to perform with DesignBeast membersarea.

 Dynamic Visual Effects

The effects offered by this software is so amazing and fully customizable so that I have given the term dynamic. All things are editable and ready to use.

Is there are any skills required to work with DesignBeast?

Designbeast is a DFY editable templates advanced graphic design software that will suggest to you the designs from its A.I. and machine learning technology. So I am sure you don’t need any advanced skills to use DesignBeast.

But to be honest, you need to work on these soft skills.

  1. Knowledge of using basic online apps.
  2. The mindset to Selecting the best
  3. Knowledge of colors
  4. Knowledge of graphics
  5. Understanding of designs
  6. Branding

And there are most soft skills required.

Design Beast Review – Who will be fit for this software?

So now in this series, it’s time to share the industry people who are best fit for this software that is Designbeast. And after lots of research and analysis, I decided to include these professionals in the DesignBeast audience. I am happy to share my point views in this DesignBeast Review.

  • Graphic Designers
  • Digital Marketers
  • Bloggers.
  • Vloggers
  • Youtubers
  • Media Agency
  • Advertising agency
  • Local Businesses
  • Ecommerce Players

DesignBeast Review – Pros & Cons

I have shared the sure short pros and cons for this revolutionary software. But there are some cons also available. After reviewing the product, as a marketer, I also realized this has lots of pros and some cons available in the market.

Pros

  • 6 modules in 1 app
  • 3d photo creation technology with AI and machine learning
  • Background and object removal technology.
  • Designs library over 7000
  • Kindly support team.
  • Trustable vendor
  • 30 Days money back gaurantee.
  • And more…

Cons

  • Some modules are more useful than 1 or 2 other modules.
  • You cannot download the software to your computer or on a desktop.
  • No more cons I have found for this software.

Design Beast OTOs/Upgrades

Here are the details of its upgrade, so that you can utilize all its advanced features. In this DesignBeast Review, I have mentioned the name and price of OTOs, and the rest of the details will be available soon.

Front End: DesignBeast Commercial

Price – $47 Onetime

  • Six Designs App For Price of One
  • Mockup Designer App
  • AI Logo Maker App
  • 1-Click Background Removal App
  • Live Motion Photos App
  • Multi-Purpose Image Editor App
  • Magic Object Removal App
  • 7000+ Ready-to-Use Templates
  • Millions of Royalty-Free Images
  • Copyright-Free Vectors & Icons
  • Hundreds of Fonts
  • Multi-Lingual Support
  • Step-by-Step Video Training
  • Commercial License
  • Sell The Designs For Profit
  • Facebook Group Access
  • Skype Mentorship Group Access
  • 8 Week Training Webinars

OTO#1: DesignBeast Elite

Price – $49 Onetime

Get access to additional features worth thousands. 10X your results, sales and profits and get ahead of the competition and other DesignBeast customers. 

  • Unlock 2,000 additional ready-to-use templates
  • Get 80 new templates added to your account each month for 1 year. (no monthly or yearly fees.)
  • Thousands of Premium Text Effects and Animations
  • Millions of Premium Royalty Free Design Assets, Icons and vectors.
  • Millions of Copyright-Free Image
  • Priority Future Software Updates

OTO#2: DesignBeast Agency

Price – $67

Sell videos for $300 to $500 each with the done-for-you agency package included. This upgrade makes it easy for everyone to find clients and sell their designs for top dollar. 

  • 5 sub accounts
  • Done-For-You Agency Marketing Bundle
  • Done-For-You Legal Client Contracts
  • Done-For-You Agency Website
  • Done-For-You Agency Sales Video

OTO#3: DesignBeast 4 in 1 Ultra.

Price – $39 OneTime

Customers get access to FOUR additional apps as part of this upgrade. 

  • Pixel Perfect
  • Instantly turn any image, even a low quality image, into ultra HD, high quality photo that can be blown up to any size – even billboard size – without any pixelation or distortion.
  • Animated Ads Builder 

Create animated ads in all languages, shapes and sizes using hundreds of ready to use design templates. Use animated ads to promote your products, create ads for clients or sell animated designs on freelancer websites like fiverr, upwork and freelancer to maximize profits. 

  • Video Resizer

With this powerful technology you can resize any video into multiple video sizes perfectly sized for all social platforms. Turn a single video into multiple dimensions and sizes within minutes and share the video onto different platforms to drive more traffic and sales!

  • Video Survey Pro

With this powerful app you can instantly collect:

* Video Testimonials

* Live video feedback from clients about your work

* Add video surveys on your websites to collect valuable information

* Have your team record video feedback about any project 

Streamline your workflows without any confusion or relying on old and outdated methods like email and text.  

OTO#4: DesignBeast Unlimited

Price $67 OneTime

With the DesignBeast basic license, you can create unlimited designs forever with one limit of 600 credits per month on each of the six apps included. 

The limits reset each month so you can continue creating amazing designs, graphics and animations forever without any monthly fees. 

This limit is put in place to prevent abuse and ensure all our customers are getting the best value for years to come at an unbeatable price.

As part of this special unlimited upgrade, you can remove all the monthly limits and restrictions for all the cutting-edge apps and technologies included. 

Design Beast Review Conclusion

From my take, this will be a good and useful tool for you if you belong to these above-mentioned professional categories. No matter you have advanced skills or not because everything will be DFY and ready to use. And the best thing is that you can customize and edit each and every pre-made effect, design, and more thing. According to my opinion, graphics designing software is ned for every marketer and business person, but everyone cannot go for photoshop, AI, and Coral, so for making it easy and useful there will be a choice in your hand that is DesignBeast.

CHECK BONUSES & GRAB IT AT: https://bit.ly/3yhtcqi

SOURCE: https://bit.ly/3Dch4KV