Tools and Images to Build a Raspberry Pi n8n server

n8n-pi

Tools and Images to Build a Raspberry Pi n8n server

Introduction

The purpose of this project is to create a Raspberry Pi image preconfigured with n8n so that it runs out of the box.

What is n8n?

n8n is a no-code/low code environment used to connect and automate different systems and services. It is programmed using a series of connected nodes that receive, transform, and then transmit date from and to other nodes. Each node represents a service or system allowing these different entities to interact. All of this is done using a WebUI.

Why n8n-pi?

Whevever a new technology is released, two common barriers often prevent potential users from trying out the technology:

  1. System costs
  2. Installation & configuration challenges

The n8n-pi project eliminates these two roadblocks by preconfiguring a working system that runs on easily available, low cost hardware. For as little as $40 and a few minutes, they can have a full n8n system up and running.

Thanks!

This project would not be possible if it was not for the help of the following:

Documentation

All documentation for this project can be found at http://n8n-pi.tephlon.xyz.

Download Details:

Author: TephlonDude

GitHub: https://github.com/TephlonDude/n8n-pi

#pi #raspberry pi #raspberry #raspberry-pi

What is GEEK

Buddha Community

Tools and Images to Build a Raspberry Pi n8n server
Queenie  Davis

Queenie Davis

1653123600

EasyMDE: Simple, Beautiful and Embeddable JavaScript Markdown Editor

EasyMDE - Markdown Editor 

This repository is a fork of SimpleMDE, made by Sparksuite. Go to the dedicated section for more information.

A drop-in JavaScript text area replacement for writing beautiful and understandable Markdown. EasyMDE allows users who may be less experienced with Markdown to use familiar toolbar buttons and shortcuts.

In addition, the syntax is rendered while editing to clearly show the expected result. Headings are larger, emphasized words are italicized, links are underlined, etc.

EasyMDE also features both built-in auto saving and spell checking. The editor is entirely customizable, from theming to toolbar buttons and javascript hooks.

Try the demo

Preview

Quick access

Install EasyMDE

Via npm:

npm install easymde

Via the UNPKG CDN:

<link rel="stylesheet" href="https://unpkg.com/easymde/dist/easymde.min.css">
<script src="https://unpkg.com/easymde/dist/easymde.min.js"></script>

Or jsDelivr:

<link rel="stylesheet" href="https://cdn.jsdelivr.net/npm/easymde/dist/easymde.min.css">
<script src="https://cdn.jsdelivr.net/npm/easymde/dist/easymde.min.js"></script>

How to use

Loading the editor

After installing and/or importing the module, you can load EasyMDE onto the first textarea element on the web page:

<textarea></textarea>
<script>
const easyMDE = new EasyMDE();
</script>

Alternatively you can select a specific textarea, via JavaScript:

<textarea id="my-text-area"></textarea>
<script>
const easyMDE = new EasyMDE({element: document.getElementById('my-text-area')});
</script>

Editor functions

Use easyMDE.value() to get the content of the editor:

<script>
easyMDE.value();
</script>

Use easyMDE.value(val) to set the content of the editor:

<script>
easyMDE.value('New input for **EasyMDE**');
</script>

Configuration

Options list

  • autoDownloadFontAwesome: If set to true, force downloads Font Awesome (used for icons). If set to false, prevents downloading. Defaults to undefined, which will intelligently check whether Font Awesome has already been included, then download accordingly.
  • autofocus: If set to true, focuses the editor automatically. Defaults to false.
  • autosave: Saves the text that's being written and will load it back in the future. It will forget the text when the form it's contained in is submitted.
    • enabled: If set to true, saves the text automatically. Defaults to false.
    • delay: Delay between saves, in milliseconds. Defaults to 10000 (10 seconds).
    • submit_delay: Delay before assuming that submit of the form failed and saving the text, in milliseconds. Defaults to autosave.delay or 10000 (10 seconds).
    • uniqueId: You must set a unique string identifier so that EasyMDE can autosave. Something that separates this from other instances of EasyMDE elsewhere on your website.
    • timeFormat: Set DateTimeFormat. More information see DateTimeFormat instances. Default locale: en-US, format: hour:minute.
    • text: Set text for autosave.
  • autoRefresh: Useful, when initializing the editor in a hidden DOM node. If set to { delay: 300 }, it will check every 300 ms if the editor is visible and if positive, call CodeMirror's refresh().
  • blockStyles: Customize how certain buttons that style blocks of text behave.
    • bold: Can be set to ** or __. Defaults to **.
    • code: Can be set to ``` or ~~~. Defaults to ```.
    • italic: Can be set to * or _. Defaults to *.
  • unorderedListStyle: can be *, - or +. Defaults to *.
  • scrollbarStyle: Chooses a scrollbar implementation. The default is "native", showing native scrollbars. The core library also provides the "null" style, which completely hides the scrollbars. Addons can implement additional scrollbar models.
  • element: The DOM element for the textarea element to use. Defaults to the first textarea element on the page.
  • forceSync: If set to true, force text changes made in EasyMDE to be immediately stored in original text area. Defaults to false.
  • hideIcons: An array of icon names to hide. Can be used to hide specific icons shown by default without completely customizing the toolbar.
  • indentWithTabs: If set to false, indent using spaces instead of tabs. Defaults to true.
  • initialValue: If set, will customize the initial value of the editor.
  • previewImagesInEditor: - EasyMDE will show preview of images, false by default, preview for images will appear only for images on separate lines.
  • imagesPreviewHandler: - A custom function for handling the preview of images. Takes the parsed string between the parantheses of the image markdown ![]( ) as argument and returns a string that serves as the src attribute of the <img> tag in the preview. Enables dynamic previewing of images in the frontend without having to upload them to a server, allows copy-pasting of images to the editor with preview.
  • insertTexts: Customize how certain buttons that insert text behave. Takes an array with two elements. The first element will be the text inserted before the cursor or highlight, and the second element will be inserted after. For example, this is the default link value: ["[", "](http://)"].
    • horizontalRule
    • image
    • link
    • table
  • lineNumbers: If set to true, enables line numbers in the editor.
  • lineWrapping: If set to false, disable line wrapping. Defaults to true.
  • minHeight: Sets the minimum height for the composition area, before it starts auto-growing. Should be a string containing a valid CSS value like "500px". Defaults to "300px".
  • maxHeight: Sets fixed height for the composition area. minHeight option will be ignored. Should be a string containing a valid CSS value like "500px". Defaults to undefined.
  • onToggleFullScreen: A function that gets called when the editor's full screen mode is toggled. The function will be passed a boolean as parameter, true when the editor is currently going into full screen mode, or false.
  • parsingConfig: Adjust settings for parsing the Markdown during editing (not previewing).
    • allowAtxHeaderWithoutSpace: If set to true, will render headers without a space after the #. Defaults to false.
    • strikethrough: If set to false, will not process GFM strikethrough syntax. Defaults to true.
    • underscoresBreakWords: If set to true, let underscores be a delimiter for separating words. Defaults to false.
  • overlayMode: Pass a custom codemirror overlay mode to parse and style the Markdown during editing.
    • mode: A codemirror mode object.
    • combine: If set to false, will replace CSS classes returned by the default Markdown mode. Otherwise the classes returned by the custom mode will be combined with the classes returned by the default mode. Defaults to true.
  • placeholder: If set, displays a custom placeholder message.
  • previewClass: A string or array of strings that will be applied to the preview screen when activated. Defaults to "editor-preview".
  • previewRender: Custom function for parsing the plaintext Markdown and returning HTML. Used when user previews.
  • promptURLs: If set to true, a JS alert window appears asking for the link or image URL. Defaults to false.
  • promptTexts: Customize the text used to prompt for URLs.
    • image: The text to use when prompting for an image's URL. Defaults to URL of the image:.
    • link: The text to use when prompting for a link's URL. Defaults to URL for the link:.
  • uploadImage: If set to true, enables the image upload functionality, which can be triggered by drag and drop, copy-paste and through the browse-file window (opened when the user click on the upload-image icon). Defaults to false.
  • imageMaxSize: Maximum image size in bytes, checked before upload (note: never trust client, always check the image size at server-side). Defaults to 1024 * 1024 * 2 (2 MB).
  • imageAccept: A comma-separated list of mime-types used to check image type before upload (note: never trust client, always check file types at server-side). Defaults to image/png, image/jpeg.
  • imageUploadFunction: A custom function for handling the image upload. Using this function will render the options imageMaxSize, imageAccept, imageUploadEndpoint and imageCSRFToken ineffective.
    • The function gets a file and onSuccess and onError callback functions as parameters. onSuccess(imageUrl: string) and onError(errorMessage: string)
  • imageUploadEndpoint: The endpoint where the images data will be sent, via an asynchronous POST request. The server is supposed to save this image, and return a JSON response.
    • if the request was successfully processed (HTTP 200 OK): {"data": {"filePath": "<filePath>"}} where filePath is the path of the image (absolute if imagePathAbsolute is set to true, relative if otherwise);
    • otherwise: {"error": "<errorCode>"}, where errorCode can be noFileGiven (HTTP 400 Bad Request), typeNotAllowed (HTTP 415 Unsupported Media Type), fileTooLarge (HTTP 413 Payload Too Large) or importError (see errorMessages below). If errorCode is not one of the errorMessages, it is alerted unchanged to the user. This allows for server-side error messages. No default value.
  • imagePathAbsolute: If set to true, will treat imageUrl from imageUploadFunction and filePath returned from imageUploadEndpoint as an absolute rather than relative path, i.e. not prepend window.location.origin to it.
  • imageCSRFToken: CSRF token to include with AJAX call to upload image. For various instances like Django, Spring and Laravel.
  • imageCSRFName: CSRF token filed name to include with AJAX call to upload image, applied when imageCSRFToken has value, defaults to csrfmiddlewaretoken.
  • imageCSRFHeader: If set to true, passing CSRF token via header. Defaults to false, which pass CSRF through request body.
  • imageTexts: Texts displayed to the user (mainly on the status bar) for the import image feature, where #image_name#, #image_size# and #image_max_size# will replaced by their respective values, that can be used for customization or internationalization:
    • sbInit: Status message displayed initially if uploadImage is set to true. Defaults to Attach files by drag and dropping or pasting from clipboard..
    • sbOnDragEnter: Status message displayed when the user drags a file to the text area. Defaults to Drop image to upload it..
    • sbOnDrop: Status message displayed when the user drops a file in the text area. Defaults to Uploading images #images_names#.
    • sbProgress: Status message displayed to show uploading progress. Defaults to Uploading #file_name#: #progress#%.
    • sbOnUploaded: Status message displayed when the image has been uploaded. Defaults to Uploaded #image_name#.
    • sizeUnits: A comma-separated list of units used to display messages with human-readable file sizes. Defaults to B, KB, MB (example: 218 KB). You can use B,KB,MB instead if you prefer without whitespaces (218KB).
  • errorMessages: Errors displayed to the user, using the errorCallback option, where #image_name#, #image_size# and #image_max_size# will replaced by their respective values, that can be used for customization or internationalization:
    • noFileGiven: The server did not receive any file from the user. Defaults to You must select a file..
    • typeNotAllowed: The user send a file type which doesn't match the imageAccept list, or the server returned this error code. Defaults to This image type is not allowed..
    • fileTooLarge: The size of the image being imported is bigger than the imageMaxSize, or if the server returned this error code. Defaults to Image #image_name# is too big (#image_size#).\nMaximum file size is #image_max_size#..
    • importError: An unexpected error occurred when uploading the image. Defaults to Something went wrong when uploading the image #image_name#..
  • errorCallback: A callback function used to define how to display an error message. Defaults to (errorMessage) => alert(errorMessage).
  • renderingConfig: Adjust settings for parsing the Markdown during previewing (not editing).
    • codeSyntaxHighlighting: If set to true, will highlight using highlight.js. Defaults to false. To use this feature you must include highlight.js on your page or pass in using the hljs option. For example, include the script and the CSS files like:
      <script src="https://cdn.jsdelivr.net/highlight.js/latest/highlight.min.js"></script>
      <link rel="stylesheet" href="https://cdn.jsdelivr.net/highlight.js/latest/styles/github.min.css">
    • hljs: An injectible instance of highlight.js. If you don't want to rely on the global namespace (window.hljs), you can provide an instance here. Defaults to undefined.
    • markedOptions: Set the internal Markdown renderer's options. Other renderingConfig options will take precedence.
    • singleLineBreaks: If set to false, disable parsing GitHub Flavored Markdown (GFM) single line breaks. Defaults to true.
    • sanitizerFunction: Custom function for sanitizing the HTML output of Markdown renderer.
  • shortcuts: Keyboard shortcuts associated with this instance. Defaults to the array of shortcuts.
  • showIcons: An array of icon names to show. Can be used to show specific icons hidden by default without completely customizing the toolbar.
  • spellChecker: If set to false, disable the spell checker. Defaults to true. Optionally pass a CodeMirrorSpellChecker-compliant function.
  • inputStyle: textarea or contenteditable. Defaults to textarea for desktop and contenteditable for mobile. contenteditable option is necessary to enable nativeSpellcheck.
  • nativeSpellcheck: If set to false, disable native spell checker. Defaults to true.
  • sideBySideFullscreen: If set to false, allows side-by-side editing without going into fullscreen. Defaults to true.
  • status: If set to false, hide the status bar. Defaults to the array of built-in status bar items.
    • Optionally, you can set an array of status bar items to include, and in what order. You can even define your own custom status bar items.
  • styleSelectedText: If set to false, remove the CodeMirror-selectedtext class from selected lines. Defaults to true.
  • syncSideBySidePreviewScroll: If set to false, disable syncing scroll in side by side mode. Defaults to true.
  • tabSize: If set, customize the tab size. Defaults to 2.
  • theme: Override the theme. Defaults to easymde.
  • toolbar: If set to false, hide the toolbar. Defaults to the array of icons.
  • toolbarTips: If set to false, disable toolbar button tips. Defaults to true.
  • direction: rtl or ltr. Changes text direction to support right-to-left languages. Defaults to ltr.

Options example

Most options demonstrate the non-default behavior:

const editor = new EasyMDE({
    autofocus: true,
    autosave: {
        enabled: true,
        uniqueId: "MyUniqueID",
        delay: 1000,
        submit_delay: 5000,
        timeFormat: {
            locale: 'en-US',
            format: {
                year: 'numeric',
                month: 'long',
                day: '2-digit',
                hour: '2-digit',
                minute: '2-digit',
            },
        },
        text: "Autosaved: "
    },
    blockStyles: {
        bold: "__",
        italic: "_",
    },
    unorderedListStyle: "-",
    element: document.getElementById("MyID"),
    forceSync: true,
    hideIcons: ["guide", "heading"],
    indentWithTabs: false,
    initialValue: "Hello world!",
    insertTexts: {
        horizontalRule: ["", "\n\n-----\n\n"],
        image: ["![](http://", ")"],
        link: ["[", "](https://)"],
        table: ["", "\n\n| Column 1 | Column 2 | Column 3 |\n| -------- | -------- | -------- |\n| Text     | Text      | Text     |\n\n"],
    },
    lineWrapping: false,
    minHeight: "500px",
    parsingConfig: {
        allowAtxHeaderWithoutSpace: true,
        strikethrough: false,
        underscoresBreakWords: true,
    },
    placeholder: "Type here...",

    previewClass: "my-custom-styling",
    previewClass: ["my-custom-styling", "more-custom-styling"],

    previewRender: (plainText) => customMarkdownParser(plainText), // Returns HTML from a custom parser
    previewRender: (plainText, preview) => { // Async method
        setTimeout(() => {
            preview.innerHTML = customMarkdownParser(plainText);
        }, 250);

        return "Loading...";
    },
    promptURLs: true,
    promptTexts: {
        image: "Custom prompt for URL:",
        link: "Custom prompt for URL:",
    },
    renderingConfig: {
        singleLineBreaks: false,
        codeSyntaxHighlighting: true,
        sanitizerFunction: (renderedHTML) => {
            // Using DOMPurify and only allowing <b> tags
            return DOMPurify.sanitize(renderedHTML, {ALLOWED_TAGS: ['b']})
        },
    },
    shortcuts: {
        drawTable: "Cmd-Alt-T"
    },
    showIcons: ["code", "table"],
    spellChecker: false,
    status: false,
    status: ["autosave", "lines", "words", "cursor"], // Optional usage
    status: ["autosave", "lines", "words", "cursor", {
        className: "keystrokes",
        defaultValue: (el) => {
            el.setAttribute('data-keystrokes', 0);
        },
        onUpdate: (el) => {
            const keystrokes = Number(el.getAttribute('data-keystrokes')) + 1;
            el.innerHTML = `${keystrokes} Keystrokes`;
            el.setAttribute('data-keystrokes', keystrokes);
        },
    }], // Another optional usage, with a custom status bar item that counts keystrokes
    styleSelectedText: false,
    sideBySideFullscreen: false,
    syncSideBySidePreviewScroll: false,
    tabSize: 4,
    toolbar: false,
    toolbarTips: false,
});

Toolbar icons

Below are the built-in toolbar icons (only some of which are enabled by default), which can be reorganized however you like. "Name" is the name of the icon, referenced in the JavaScript. "Action" is either a function or a URL to open. "Class" is the class given to the icon. "Tooltip" is the small tooltip that appears via the title="" attribute. Note that shortcut hints are added automatically and reflect the specified action if it has a key bind assigned to it (i.e. with the value of action set to bold and that of tooltip set to Bold, the final text the user will see would be "Bold (Ctrl-B)").

Additionally, you can add a separator between any icons by adding "|" to the toolbar array.

NameActionTooltip
Class
boldtoggleBoldBold
fa fa-bold
italictoggleItalicItalic
fa fa-italic
strikethroughtoggleStrikethroughStrikethrough
fa fa-strikethrough
headingtoggleHeadingSmallerHeading
fa fa-header
heading-smallertoggleHeadingSmallerSmaller Heading
fa fa-header
heading-biggertoggleHeadingBiggerBigger Heading
fa fa-lg fa-header
heading-1toggleHeading1Big Heading
fa fa-header header-1
heading-2toggleHeading2Medium Heading
fa fa-header header-2
heading-3toggleHeading3Small Heading
fa fa-header header-3
codetoggleCodeBlockCode
fa fa-code
quotetoggleBlockquoteQuote
fa fa-quote-left
unordered-listtoggleUnorderedListGeneric List
fa fa-list-ul
ordered-listtoggleOrderedListNumbered List
fa fa-list-ol
clean-blockcleanBlockClean block
fa fa-eraser
linkdrawLinkCreate Link
fa fa-link
imagedrawImageInsert Image
fa fa-picture-o
tabledrawTableInsert Table
fa fa-table
horizontal-ruledrawHorizontalRuleInsert Horizontal Line
fa fa-minus
previewtogglePreviewToggle Preview
fa fa-eye no-disable
side-by-sidetoggleSideBySideToggle Side by Side
fa fa-columns no-disable no-mobile
fullscreentoggleFullScreenToggle Fullscreen
fa fa-arrows-alt no-disable no-mobile
guideThis linkMarkdown Guide
fa fa-question-circle
undoundoUndo
fa fa-undo
redoredoRedo
fa fa-redo

Toolbar customization

Customize the toolbar using the toolbar option.

Only the order of existing buttons:

const easyMDE = new EasyMDE({
    toolbar: ["bold", "italic", "heading", "|", "quote"]
});

All information and/or add your own icons

const easyMDE = new EasyMDE({
    toolbar: [
        {
            name: "bold",
            action: EasyMDE.toggleBold,
            className: "fa fa-bold",
            title: "Bold",
        },
        "italics", // shortcut to pre-made button
        {
            name: "custom",
            action: (editor) => {
                // Add your own code
            },
            className: "fa fa-star",
            title: "Custom Button",
            attributes: { // for custom attributes
                id: "custom-id",
                "data-value": "custom value" // HTML5 data-* attributes need to be enclosed in quotation marks ("") because of the dash (-) in its name.
            }
        },
        "|" // Separator
        // [, ...]
    ]
});

Put some buttons on dropdown menu

const easyMDE = new EasyMDE({
    toolbar: [{
                name: "heading",
                action: EasyMDE.toggleHeadingSmaller,
                className: "fa fa-header",
                title: "Headers",
            },
            "|",
            {
                name: "others",
                className: "fa fa-blind",
                title: "others buttons",
                children: [
                    {
                        name: "image",
                        action: EasyMDE.drawImage,
                        className: "fa fa-picture-o",
                        title: "Image",
                    },
                    {
                        name: "quote",
                        action: EasyMDE.toggleBlockquote,
                        className: "fa fa-percent",
                        title: "Quote",
                    },
                    {
                        name: "link",
                        action: EasyMDE.drawLink,
                        className: "fa fa-link",
                        title: "Link",
                    }
                ]
            },
        // [, ...]
    ]
});

Keyboard shortcuts

EasyMDE comes with an array of predefined keyboard shortcuts, but they can be altered with a configuration option. The list of default ones is as follows:

Shortcut (Windows / Linux)Shortcut (macOS)Action
Ctrl-'Cmd-'"toggleBlockquote"
Ctrl-BCmd-B"toggleBold"
Ctrl-ECmd-E"cleanBlock"
Ctrl-HCmd-H"toggleHeadingSmaller"
Ctrl-ICmd-I"toggleItalic"
Ctrl-KCmd-K"drawLink"
Ctrl-LCmd-L"toggleUnorderedList"
Ctrl-PCmd-P"togglePreview"
Ctrl-Alt-CCmd-Alt-C"toggleCodeBlock"
Ctrl-Alt-ICmd-Alt-I"drawImage"
Ctrl-Alt-LCmd-Alt-L"toggleOrderedList"
Shift-Ctrl-HShift-Cmd-H"toggleHeadingBigger"
F9F9"toggleSideBySide"
F11F11"toggleFullScreen"

Here is how you can change a few, while leaving others untouched:

const editor = new EasyMDE({
    shortcuts: {
        "toggleOrderedList": "Ctrl-Alt-K", // alter the shortcut for toggleOrderedList
        "toggleCodeBlock": null, // unbind Ctrl-Alt-C
        "drawTable": "Cmd-Alt-T", // bind Cmd-Alt-T to drawTable action, which doesn't come with a default shortcut
    }
});

Shortcuts are automatically converted between platforms. If you define a shortcut as "Cmd-B", on PC that shortcut will be changed to "Ctrl-B". Conversely, a shortcut defined as "Ctrl-B" will become "Cmd-B" for Mac users.

The list of actions that can be bound is the same as the list of built-in actions available for toolbar buttons.

Advanced use

Event handling

You can catch the following list of events: https://codemirror.net/doc/manual.html#events

const easyMDE = new EasyMDE();
easyMDE.codemirror.on("change", () => {
    console.log(easyMDE.value());
});

Removing EasyMDE from text area

You can revert to the initial text area by calling the toTextArea method. Note that this clears up the autosave (if enabled) associated with it. The text area will retain any text from the destroyed EasyMDE instance.

const easyMDE = new EasyMDE();
// ...
easyMDE.toTextArea();
easyMDE = null;

If you need to remove registered event listeners (when the editor is not needed anymore), call easyMDE.cleanup().

Useful methods

The following self-explanatory methods may be of use while developing with EasyMDE.

const easyMDE = new EasyMDE();
easyMDE.isPreviewActive(); // returns boolean
easyMDE.isSideBySideActive(); // returns boolean
easyMDE.isFullscreenActive(); // returns boolean
easyMDE.clearAutosavedValue(); // no returned value

How it works

EasyMDE is a continuation of SimpleMDE.

SimpleMDE began as an improvement of lepture's Editor project, but has now taken on an identity of its own. It is bundled with CodeMirror and depends on Font Awesome.

CodeMirror is the backbone of the project and parses much of the Markdown syntax as it's being written. This allows us to add styles to the Markdown that's being written. Additionally, a toolbar and status bar have been added to the top and bottom, respectively. Previews are rendered by Marked using GitHub Flavored Markdown (GFM).

SimpleMDE fork

I originally made this fork to implement FontAwesome 5 compatibility into SimpleMDE. When that was done I submitted a pull request, which has not been accepted yet. This, and the project being inactive since May 2017, triggered me to make more changes and try to put new life into the project.

Changes include:

  • FontAwesome 5 compatibility
  • Guide button works when editor is in preview mode
  • Links are now https:// by default
  • Small styling changes
  • Support for Node 8 and beyond
  • Lots of refactored code
  • Links in preview will open in a new tab by default
  • TypeScript support

My intention is to continue development on this project, improving it and keeping it alive.

Hacking EasyMDE

You may want to edit this library to adapt its behavior to your needs. This can be done in some quick steps:

  1. Follow the prerequisites and installation instructions in the contribution guide;
  2. Do your changes;
  3. Run gulp command, which will generate files: dist/easymde.min.css and dist/easymde.min.js;
  4. Copy-paste those files to your code base, and you are done.

Contributing

Want to contribute to EasyMDE? Thank you! We have a contribution guide just for you!


Author: Ionaru
Source Code: https://github.com/Ionaru/easy-markdown-editor
License: MIT license

#react-native #react 

Tools and Images to Build a Raspberry Pi n8n server

n8n-pi

Tools and Images to Build a Raspberry Pi n8n server

Introduction

The purpose of this project is to create a Raspberry Pi image preconfigured with n8n so that it runs out of the box.

What is n8n?

n8n is a no-code/low code environment used to connect and automate different systems and services. It is programmed using a series of connected nodes that receive, transform, and then transmit date from and to other nodes. Each node represents a service or system allowing these different entities to interact. All of this is done using a WebUI.

Why n8n-pi?

Whevever a new technology is released, two common barriers often prevent potential users from trying out the technology:

  1. System costs
  2. Installation & configuration challenges

The n8n-pi project eliminates these two roadblocks by preconfiguring a working system that runs on easily available, low cost hardware. For as little as $40 and a few minutes, they can have a full n8n system up and running.

Thanks!

This project would not be possible if it was not for the help of the following:

Documentation

All documentation for this project can be found at http://n8n-pi.tephlon.xyz.

Download Details:

Author: TephlonDude

GitHub: https://github.com/TephlonDude/n8n-pi

#pi #raspberry pi #raspberry #raspberry-pi

Daniel  Hughes

Daniel Hughes

1649214000

LaravelS: Glue for using Swoole in Laravel Or Lumen.

🚀 LaravelS is an out-of-the-box adapter between Swoole and Laravel/Lumen.

Please Watch this repository to get the latest updates.

中文文档

Table of Contents

Features

Built-in Http/WebSocket server

Multi-port mixed protocol

Custom process

Memory resident

Asynchronous event listening

Asynchronous task queue

Millisecond cron job

Common Components

Gracefully reload

Automatically reload after modifying code

Support Laravel/Lumen both, good compatibility

Simple & Out of the box

Benchmark

Which is the fastest web framework?

TechEmpower Framework Benchmarks

Requirements

DependencyRequirement
PHP>= 5.5.9 Recommend PHP7+
Swoole>= 1.7.19 No longer support PHP5 since 2.0.12 Recommend 4.5.0+
Laravel/Lumen>= 5.1 Recommend 8.0+

Install

1.Require package via Composer(packagist).

composer require "hhxsv5/laravel-s:~3.7.0" -vvv
# Make sure that your composer.lock file is under the VCS

2.Register service provider(pick one of two).

Laravel: in config/app.php file, Laravel 5.5+ supports package discovery automatically, you should skip this step

'providers' => [
    //...
    Hhxsv5\LaravelS\Illuminate\LaravelSServiceProvider::class,
],

Lumen: in bootstrap/app.php file

$app->register(Hhxsv5\LaravelS\Illuminate\LaravelSServiceProvider::class);

3.Publish configuration and binaries.

After upgrading LaravelS, you need to republish; click here to see the change notes of each version.

php artisan laravels publish
# Configuration: config/laravels.php
# Binary: bin/laravels bin/fswatch bin/inotify

4.Change config/laravels.php: listen_ip, listen_port, refer Settings.

5.Performance tuning

Adjust kernel parameters

Number of Workers: LaravelS uses Swoole's Synchronous IO mode, the larger the worker_num setting, the better the concurrency performance, but it will cause more memory usage and process switching overhead. If one request takes 100ms, in order to provide 1000QPS concurrency, at least 100 Worker processes need to be configured. The calculation method is: worker_num = 1000QPS/(1s/1ms) = 100, so incremental pressure testing is needed to calculate the best worker_num.

Number of Task Workers

Run

Please read the notices carefully before running, Important notices(IMPORTANT).

  • Commands: php bin/laravels {start|stop|restart|reload|info|help}.
CommandDescription
startStart LaravelS, list the processes by "ps -ef|grep laravels"
stopStop LaravelS, and trigger the method onStop of Custom process
restartRestart LaravelS: Stop gracefully before starting; The service is unavailable until startup is complete
reloadReload all Task/Worker/Timer processes which contain your business codes, and trigger the method onReload of Custom process, CANNOT reload Master/Manger processes. After modifying config/laravels.php, you only have to call restart to restart
infoDisplay component version information
helpDisplay help information
  • Boot options for the commands start and restart.
OptionDescription
-d|--daemonizeRun as a daemon, this option will override the swoole.daemonize setting in laravels.php
-e|--envThe environment the command should run under, such as --env=testing will use the configuration file .env.testing firstly, this feature requires Laravel 5.2+
-i|--ignoreIgnore checking PID file of Master process
-x|--x-versionThe version(branch) of the current project, stored in $_ENV/$_SERVER, access via $_ENV['X_VERSION'] $_SERVER['X_VERSION'] $request->server->get('X_VERSION')
  • Runtime files: start will automatically execute php artisan laravels config and generate these files, developers generally don't need to pay attention to them, it's recommended to add them to .gitignore.
FileDescription
storage/laravels.confLaravelS's runtime configuration file
storage/laravels.pidPID file of Master process
storage/laravels-timer-process.pidPID file of the Timer process
storage/laravels-custom-processes.pidPID file of all custom processes

Deploy

It is recommended to supervise the main process through Supervisord, the premise is without option -d and to set swoole.daemonize to false.

[program:laravel-s-test]
directory=/var/www/laravel-s-test
command=/usr/local/bin/php bin/laravels start -i
numprocs=1
autostart=true
autorestart=true
startretries=3
user=www-data
redirect_stderr=true
stdout_logfile=/var/log/supervisor/%(program_name)s.log

Cooperate with Nginx (Recommended)

Demo.

gzip on;
gzip_min_length 1024;
gzip_comp_level 2;
gzip_types text/plain text/css text/javascript application/json application/javascript application/x-javascript application/xml application/x-httpd-php image/jpeg image/gif image/png font/ttf font/otf image/svg+xml;
gzip_vary on;
gzip_disable "msie6";
upstream swoole {
    # Connect IP:Port
    server 127.0.0.1:5200 weight=5 max_fails=3 fail_timeout=30s;
    # Connect UnixSocket Stream file, tips: put the socket file in the /dev/shm directory to get better performance
    #server unix:/yourpath/laravel-s-test/storage/laravels.sock weight=5 max_fails=3 fail_timeout=30s;
    #server 192.168.1.1:5200 weight=3 max_fails=3 fail_timeout=30s;
    #server 192.168.1.2:5200 backup;
    keepalive 16;
}
server {
    listen 80;
    # Don't forget to bind the host
    server_name laravels.com;
    root /yourpath/laravel-s-test/public;
    access_log /yourpath/log/nginx/$server_name.access.log  main;
    autoindex off;
    index index.html index.htm;
    # Nginx handles the static resources(recommend enabling gzip), LaravelS handles the dynamic resource.
    location / {
        try_files $uri @laravels;
    }
    # Response 404 directly when request the PHP file, to avoid exposing public/*.php
    #location ~* \.php$ {
    #    return 404;
    #}
    location @laravels {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout 120s;
        proxy_http_version 1.1;
        proxy_set_header Connection "";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        # "swoole" is the upstream
        proxy_pass http://swoole;
    }
}

Cooperate with Apache

LoadModule proxy_module /yourpath/modules/mod_proxy.so
LoadModule proxy_balancer_module /yourpath/modules/mod_proxy_balancer.so
LoadModule lbmethod_byrequests_module /yourpath/modules/mod_lbmethod_byrequests.so
LoadModule proxy_http_module /yourpath/modules/mod_proxy_http.so
LoadModule slotmem_shm_module /yourpath/modules/mod_slotmem_shm.so
LoadModule rewrite_module /yourpath/modules/mod_rewrite.so
LoadModule remoteip_module /yourpath/modules/mod_remoteip.so
LoadModule deflate_module /yourpath/modules/mod_deflate.so

<IfModule deflate_module>
    SetOutputFilter DEFLATE
    DeflateCompressionLevel 2
    AddOutputFilterByType DEFLATE text/html text/plain text/css text/javascript application/json application/javascript application/x-javascript application/xml application/x-httpd-php image/jpeg image/gif image/png font/ttf font/otf image/svg+xml
</IfModule>

<VirtualHost *:80>
    # Don't forget to bind the host
    ServerName www.laravels.com
    ServerAdmin hhxsv5@sina.com

    DocumentRoot /yourpath/laravel-s-test/public;
    DirectoryIndex index.html index.htm
    <Directory "/">
        AllowOverride None
        Require all granted
    </Directory>

    RemoteIPHeader X-Forwarded-For

    ProxyRequests Off
    ProxyPreserveHost On
    <Proxy balancer://laravels>  
        BalancerMember http://192.168.1.1:5200 loadfactor=7
        #BalancerMember http://192.168.1.2:5200 loadfactor=3
        #BalancerMember http://192.168.1.3:5200 loadfactor=1 status=+H
        ProxySet lbmethod=byrequests
    </Proxy>
    #ProxyPass / balancer://laravels/
    #ProxyPassReverse / balancer://laravels/

    # Apache handles the static resources, LaravelS handles the dynamic resource.
    RewriteEngine On
    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} !-d
    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} !-f
    RewriteRule ^/(.*)$ balancer://laravels%{REQUEST_URI} [P,L]

    ErrorLog ${APACHE_LOG_DIR}/www.laravels.com.error.log
    CustomLog ${APACHE_LOG_DIR}/www.laravels.com.access.log combined
</VirtualHost>

Enable WebSocket server

The Listening address of WebSocket Sever is the same as Http Server.

1.Create WebSocket Handler class, and implement interface WebSocketHandlerInterface.The instant is automatically instantiated when start, you do not need to manually create it.

namespace App\Services;
use Hhxsv5\LaravelS\Swoole\WebSocketHandlerInterface;
use Swoole\Http\Request;
use Swoole\Http\Response;
use Swoole\WebSocket\Frame;
use Swoole\WebSocket\Server;
/**
 * @see https://www.swoole.co.uk/docs/modules/swoole-websocket-server
 */
class WebSocketService implements WebSocketHandlerInterface
{
    // Declare constructor without parameters
    public function __construct()
    {
    }
    // public function onHandShake(Request $request, Response $response)
    // {
           // Custom handshake: https://www.swoole.co.uk/docs/modules/swoole-websocket-server-on-handshake
           // The onOpen event will be triggered automatically after a successful handshake
    // }
    public function onOpen(Server $server, Request $request)
    {
        // Before the onOpen event is triggered, the HTTP request to establish the WebSocket has passed the Laravel route,
        // so Laravel's Request, Auth information are readable, Session is readable and writable, but only in the onOpen event.
        // \Log::info('New WebSocket connection', [$request->fd, request()->all(), session()->getId(), session('xxx'), session(['yyy' => time()])]);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $server->push($request->fd, 'Welcome to LaravelS');
    }
    public function onMessage(Server $server, Frame $frame)
    {
        // \Log::info('Received message', [$frame->fd, $frame->data, $frame->opcode, $frame->finish]);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $server->push($frame->fd, date('Y-m-d H:i:s'));
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

2.Modify config/laravels.php.

// ...
'websocket'      => [
    'enable'  => true, // Note: set enable to true
    'handler' => \App\Services\WebSocketService::class,
],
'swoole'         => [
    //...
    // Must set dispatch_mode in (2, 4, 5), see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
    'dispatch_mode' => 2,
    //...
],
// ...

3.Use SwooleTable to bind FD & UserId, optional, Swoole Table Demo. Also you can use the other global storage services, like Redis/Memcached/MySQL, but be careful that FD will be possible conflicting between multiple Swoole Servers.

4.Cooperate with Nginx (Recommended)

Refer WebSocket Proxy

map $http_upgrade $connection_upgrade {
    default upgrade;
    ''      close;
}
upstream swoole {
    # Connect IP:Port
    server 127.0.0.1:5200 weight=5 max_fails=3 fail_timeout=30s;
    # Connect UnixSocket Stream file, tips: put the socket file in the /dev/shm directory to get better performance
    #server unix:/yourpath/laravel-s-test/storage/laravels.sock weight=5 max_fails=3 fail_timeout=30s;
    #server 192.168.1.1:5200 weight=3 max_fails=3 fail_timeout=30s;
    #server 192.168.1.2:5200 backup;
    keepalive 16;
}
server {
    listen 80;
    # Don't forget to bind the host
    server_name laravels.com;
    root /yourpath/laravel-s-test/public;
    access_log /yourpath/log/nginx/$server_name.access.log  main;
    autoindex off;
    index index.html index.htm;
    # Nginx handles the static resources(recommend enabling gzip), LaravelS handles the dynamic resource.
    location / {
        try_files $uri @laravels;
    }
    # Response 404 directly when request the PHP file, to avoid exposing public/*.php
    #location ~* \.php$ {
    #    return 404;
    #}
    # Http and WebSocket are concomitant, Nginx identifies them by "location"
    # !!! The location of WebSocket is "/ws"
    # Javascript: var ws = new WebSocket("ws://laravels.com/ws");
    location =/ws {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout: Nginx will close the connection if the proxied server does not send data to Nginx in 60 seconds; At the same time, this close behavior is also affected by heartbeat setting of Swoole.
        # proxy_read_timeout 60s;
        proxy_http_version 1.1;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection $connection_upgrade;
        proxy_pass http://swoole;
    }
    location @laravels {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout 60s;
        proxy_http_version 1.1;
        proxy_set_header Connection "";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_pass http://swoole;
    }
}

5.Heartbeat setting

Heartbeat setting of Swoole

// config/laravels.php
'swoole' => [
    //...
    // All connections are traversed every 60 seconds. If a connection does not send any data to the server within 600 seconds, the connection will be forced to close.
    'heartbeat_idle_time'      => 600,
    'heartbeat_check_interval' => 60,
    //...
],

Proxy read timeout of Nginx

# Nginx will close the connection if the proxied server does not send data to Nginx in 60 seconds
proxy_read_timeout 60s;

6.Push data in controller

namespace App\Http\Controllers;
class TestController extends Controller
{
    public function push()
    {
        $fd = 1; // Find fd by userId from a map [userId=>fd].
        /**@var \Swoole\WebSocket\Server $swoole */
        $swoole = app('swoole');
        $success = $swoole->push($fd, 'Push data to fd#1 in Controller');
        var_dump($success);
    }
}

Listen events

System events

Usually, you can reset/destroy some global/static variables, or change the current Request/Response object.

laravels.received_request After LaravelS parsed Swoole\Http\Request to Illuminate\Http\Request, before Laravel's Kernel handles this request.

// Edit file `app/Providers/EventServiceProvider.php`, add the following code into method `boot`
// If no variable $events, you can also call Facade \Event::listen(). 
$events->listen('laravels.received_request', function (\Illuminate\Http\Request $req, $app) {
    $req->query->set('get_key', 'hhxsv5');// Change query of request
    $req->request->set('post_key', 'hhxsv5'); // Change post of request
});

laravels.generated_response After Laravel's Kernel handled the request, before LaravelS parses Illuminate\Http\Response to Swoole\Http\Response.

// Edit file `app/Providers/EventServiceProvider.php`, add the following code into method `boot`
// If no variable $events, you can also call Facade \Event::listen(). 
$events->listen('laravels.generated_response', function (\Illuminate\Http\Request $req, \Symfony\Component\HttpFoundation\Response $rsp, $app) {
    $rsp->headers->set('header-key', 'hhxsv5');// Change header of response
});

Customized asynchronous events

This feature depends on AsyncTask of Swoole, your need to set swoole.task_worker_num in config/laravels.php firstly. The performance of asynchronous event processing is influenced by number of Swoole task process, you need to set task_worker_num appropriately.

1.Create event class.

use Hhxsv5\LaravelS\Swoole\Task\Event;
class TestEvent extends Event
{
    protected $listeners = [
        // Listener list
        TestListener1::class,
        // TestListener2::class,
    ];
    private $data;
    public function __construct($data)
    {
        $this->data = $data;
    }
    public function getData()
    {
        return $this->data;
    }
}

2.Create listener class.

use Hhxsv5\LaravelS\Swoole\Task\Task;
use Hhxsv5\LaravelS\Swoole\Task\Listener;
class TestListener1 extends Listener
{
    /**
     * @var TestEvent
     */
    protected $event;
    
    public function handle()
    {
        \Log::info(__CLASS__ . ':handle start', [$this->event->getData()]);
        sleep(2);// Simulate the slow codes
        // Deliver task in CronJob, but NOT support callback finish() of task.
        // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
        $ret = Task::deliver(new TestTask('task data'));
        var_dump($ret);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

3.Fire event.

// Create instance of event and fire it, "fire" is asynchronous.
use Hhxsv5\LaravelS\Swoole\Task\Event;
$event = new TestEvent('event data');
// $event->delay(10); // Delay 10 seconds to fire event
// $event->setTries(3); // When an error occurs, try 3 times in total
$success = Event::fire($event);
var_dump($success);// Return true if sucess, otherwise false

Asynchronous task queue

This feature depends on AsyncTask of Swoole, your need to set swoole.task_worker_num in config/laravels.php firstly. The performance of task processing is influenced by number of Swoole task process, you need to set task_worker_num appropriately.

1.Create task class.

use Hhxsv5\LaravelS\Swoole\Task\Task;
class TestTask extends Task
{
    private $data;
    private $result;
    public function __construct($data)
    {
        $this->data = $data;
    }
    // The logic of task handling, run in task process, CAN NOT deliver task
    public function handle()
    {
        \Log::info(__CLASS__ . ':handle start', [$this->data]);
        sleep(2);// Simulate the slow codes
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $this->result = 'the result of ' . $this->data;
    }
    // Optional, finish event, the logic of after task handling, run in worker process, CAN deliver task 
    public function finish()
    {
        \Log::info(__CLASS__ . ':finish start', [$this->result]);
        Task::deliver(new TestTask2('task2 data')); // Deliver the other task
    }
}

2.Deliver task.

// Create instance of TestTask and deliver it, "deliver" is asynchronous.
use Hhxsv5\LaravelS\Swoole\Task\Task;
$task = new TestTask('task data');
// $task->delay(3);// delay 3 seconds to deliver task
// $task->setTries(3); // When an error occurs, try 3 times in total
$ret = Task::deliver($task);
var_dump($ret);// Return true if sucess, otherwise false

Millisecond cron job

Wrapper cron job base on Swoole's Millisecond Timer, replace Linux Crontab.

1.Create cron job class.

namespace App\Jobs\Timer;
use App\Tasks\TestTask;
use Swoole\Coroutine;
use Hhxsv5\LaravelS\Swoole\Task\Task;
use Hhxsv5\LaravelS\Swoole\Timer\CronJob;
class TestCronJob extends CronJob
{
    protected $i = 0;
    // !!! The `interval` and `isImmediate` of cron job can be configured in two ways(pick one of two): one is to overload the corresponding method, and the other is to pass parameters when registering cron job.
    // --- Override the corresponding method to return the configuration: begin
    public function interval()
    {
        return 1000;// Run every 1000ms
    }
    public function isImmediate()
    {
        return false;// Whether to trigger `run` immediately after setting up
    }
    // --- Override the corresponding method to return the configuration: end
    public function run()
    {
        \Log::info(__METHOD__, ['start', $this->i, microtime(true)]);
        // do something
        // sleep(1); // Swoole < 2.1
        Coroutine::sleep(1); // Swoole>=2.1 Coroutine will be automatically created for run().
        $this->i++;
        \Log::info(__METHOD__, ['end', $this->i, microtime(true)]);

        if ($this->i >= 10) { // Run 10 times only
            \Log::info(__METHOD__, ['stop', $this->i, microtime(true)]);
            $this->stop(); // Stop this cron job, but it will run again after restart/reload.
            // Deliver task in CronJob, but NOT support callback finish() of task.
            // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
            $ret = Task::deliver(new TestTask('task data'));
            var_dump($ret);
        }
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

2.Register cron job.

// Register cron jobs in file "config/laravels.php"
[
    // ...
    'timer'          => [
        'enable' => true, // Enable Timer
        'jobs'   => [ // The list of cron job
            // Enable LaravelScheduleJob to run `php artisan schedule:run` every 1 minute, replace Linux Crontab
            // \Hhxsv5\LaravelS\Illuminate\LaravelScheduleJob::class,
            // Two ways to configure parameters:
            // [\App\Jobs\Timer\TestCronJob::class, [1000, true]], // Pass in parameters when registering
            \App\Jobs\Timer\TestCronJob::class, // Override the corresponding method to return the configuration
        ],
        'max_wait_time' => 5, // Max waiting time of reloading
        // Enable the global lock to ensure that only one instance starts the timer when deploying multiple instances. This feature depends on Redis, please see https://laravel.com/docs/7.x/redis
        'global_lock'     => false,
        'global_lock_key' => config('app.name', 'Laravel'),
    ],
    // ...
];

3.Note: it will launch multiple timers when build the server cluster, so you need to make sure that launch one timer only to avoid running repetitive task.

4.LaravelS v3.4.0 starts to support the hot restart [Reload] Timer process. After LaravelS receives the SIGUSR1 signal, it waits for max_wait_time(default 5) seconds to end the process, then the Manager process will pull up the Timer process again.

5.If you only need to use minute-level scheduled tasks, it is recommended to enable Hhxsv5\LaravelS\Illuminate\LaravelScheduleJob instead of Linux Crontab, so that you can follow the coding habits of Laravel task scheduling and configure Kernel.

// app/Console/Kernel.php
protected function schedule(Schedule $schedule)
{
    // runInBackground() will start a new child process to execute the task. This is asynchronous and will not affect the execution timing of other tasks.
    $schedule->command(TestCommand::class)->runInBackground()->everyMinute();
}

Automatically reload after modifying code

Via inotify, support Linux only.

1.Install inotify extension.

2.Turn on the switch in Settings.

3.Notice: Modify the file only in Linux to receive the file change events. It's recommended to use the latest Docker. Vagrant Solution.

Via fswatch, support OS X/Linux/Windows.

1.Install fswatch.

2.Run command in your project root directory.

# Watch current directory
./bin/fswatch
# Watch app directory
./bin/fswatch ./app

Via inotifywait, support Linux.

1.Install inotify-tools.

2.Run command in your project root directory.

# Watch current directory
./bin/inotify
# Watch app directory
./bin/inotify ./app

When the above methods does not work, the ultimate solution: set max_request=1,worker_num=1, so that Worker process will restart after processing a request. The performance of this method is very poor, so only development environment use.

Get the instance of SwooleServer in your project

/**
 * $swoole is the instance of `Swoole\WebSocket\Server` if enable WebSocket server, otherwise `Swoole\Http\Server`
 * @var \Swoole\WebSocket\Server|\Swoole\Http\Server $swoole
 */
$swoole = app('swoole');
var_dump($swoole->stats());
$swoole->push($fd, 'Push WebSocket message');

Use SwooleTable

1.Define Table, support multiple.

All defined tables will be created before Swoole starting.

// in file "config/laravels.php"
[
    // ...
    'swoole_tables'  => [
        // Scene:bind UserId & FD in WebSocket
        'ws' => [// The Key is table name, will add suffix "Table" to avoid naming conflicts. Here defined a table named "wsTable"
            'size'   => 102400,// The max size
            'column' => [// Define the columns
                ['name' => 'value', 'type' => \Swoole\Table::TYPE_INT, 'size' => 8],
            ],
        ],
        //...Define the other tables
    ],
    // ...
];

2.Access Table: all table instances will be bound on SwooleServer, access by app('swoole')->xxxTable.

namespace App\Services;
use Hhxsv5\LaravelS\Swoole\WebSocketHandlerInterface;
use Swoole\Http\Request;
use Swoole\WebSocket\Frame;
use Swoole\WebSocket\Server;
class WebSocketService implements WebSocketHandlerInterface
{
    /**@var \Swoole\Table $wsTable */
    private $wsTable;
    public function __construct()
    {
        $this->wsTable = app('swoole')->wsTable;
    }
    // Scene:bind UserId & FD in WebSocket
    public function onOpen(Server $server, Request $request)
    {
        // var_dump(app('swoole') === $server);// The same instance
        /**
         * Get the currently logged in user
         * This feature requires that the path to establish a WebSocket connection go through middleware such as Authenticate.
         * E.g:
         * Browser side: var ws = new WebSocket("ws://127.0.0.1:5200/ws");
         * Then the /ws route in Laravel needs to add the middleware like Authenticate.
         * Route::get('/ws', function () {
         *     // Respond any content with status code 200
         *     return 'websocket';
         * })->middleware(['auth']);
         */
        // $user = Auth::user();
        // $userId = $user ? $user->id : 0; // 0 means a guest user who is not logged in
        $userId = mt_rand(1000, 10000);
        // if (!$userId) {
        //     // Disconnect the connections of unlogged users
        //     $server->disconnect($request->fd);
        //     return;
        // }
        $this->wsTable->set('uid:' . $userId, ['value' => $request->fd]);// Bind map uid to fd
        $this->wsTable->set('fd:' . $request->fd, ['value' => $userId]);// Bind map fd to uid
        $server->push($request->fd, "Welcome to LaravelS #{$request->fd}");
    }
    public function onMessage(Server $server, Frame $frame)
    {
        // Broadcast
        foreach ($this->wsTable as $key => $row) {
            if (strpos($key, 'uid:') === 0 && $server->isEstablished($row['value'])) {
                $content = sprintf('Broadcast: new message "%s" from #%d', $frame->data, $frame->fd);
                $server->push($row['value'], $content);
            }
        }
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        $uid = $this->wsTable->get('fd:' . $fd);
        if ($uid !== false) {
            $this->wsTable->del('uid:' . $uid['value']); // Unbind uid map
        }
        $this->wsTable->del('fd:' . $fd);// Unbind fd map
        $server->push($fd, "Goodbye #{$fd}");
    }
}

Multi-port mixed protocol

For more information, please refer to Swoole Server AddListener

To make our main server support more protocols not just Http and WebSocket, we bring the feature multi-port mixed protocol of Swoole in LaravelS and name it Socket. Now, you can build TCP/UDP applications easily on top of Laravel.

Create Socket handler class, and extend Hhxsv5\LaravelS\Swoole\Socket\{TcpSocket|UdpSocket|Http|WebSocket}.

namespace App\Sockets;
use Hhxsv5\LaravelS\Swoole\Socket\TcpSocket;
use Swoole\Server;
class TestTcpSocket extends TcpSocket
{
    public function onConnect(Server $server, $fd, $reactorId)
    {
        \Log::info('New TCP connection', [$fd]);
        $server->send($fd, 'Welcome to LaravelS.');
    }
    public function onReceive(Server $server, $fd, $reactorId, $data)
    {
        \Log::info('Received data', [$fd, $data]);
        $server->send($fd, 'LaravelS: ' . $data);
        if ($data === "quit\r\n") {
            $server->send($fd, 'LaravelS: bye' . PHP_EOL);
            $server->close($fd);
        }
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        \Log::info('Close TCP connection', [$fd]);
        $server->send($fd, 'Goodbye');
    }
}

These Socket connections share the same worker processes with your HTTP/WebSocket connections. So it won't be a problem at all if you want to deliver tasks, use SwooleTable, even Laravel components such as DB, Eloquent and so on. At the same time, you can access Swoole\Server\Port object directly by member property swoolePort.

public function onReceive(Server $server, $fd, $reactorId, $data)
{
    $port = $this->swoolePort; // Get the `Swoole\Server\Port` object
}
namespace App\Http\Controllers;
class TestController extends Controller
{
    public function test()
    {
        /**@var \Swoole\Http\Server|\Swoole\WebSocket\Server $swoole */
        $swoole = app('swoole');
        // $swoole->ports: Traverse all Port objects, https://www.swoole.co.uk/docs/modules/swoole-server/multiple-ports
        $port = $swoole->ports[0]; // Get the `Swoole\Server\Port` object, $port[0] is the port of the main server
        foreach ($port->connections as $fd) { // Traverse all connections
            // $swoole->send($fd, 'Send tcp message');
            // if($swoole->isEstablished($fd)) {
            //     $swoole->push($fd, 'Send websocket message');
            // }
        }
    }
}

Register Sockets.

// Edit `config/laravels.php`
//...
'sockets' => [
    [
        'host'     => '127.0.0.1',
        'port'     => 5291,
        'type'     => SWOOLE_SOCK_TCP,// Socket type: SWOOLE_SOCK_TCP/SWOOLE_SOCK_TCP6/SWOOLE_SOCK_UDP/SWOOLE_SOCK_UDP6/SWOOLE_UNIX_DGRAM/SWOOLE_UNIX_STREAM
        'settings' => [// Swoole settings:https://www.swoole.co.uk/docs/modules/swoole-server-methods#swoole_server-addlistener
            'open_eof_check' => true,
            'package_eof'    => "\r\n",
        ],
        'handler'  => \App\Sockets\TestTcpSocket::class,
        'enable'   => true, // whether to enable, default true
    ],
],

About the heartbeat configuration, it can only be set on the main server and cannot be configured on Socket, but the Socket inherits the heartbeat configuration of the main server.

For TCP socket, onConnect and onClose events will be blocked when dispatch_mode of Swoole is 1/3, so if you want to unblock these two events please set dispatch_mode to 2/4/5.

'swoole' => [
    //...
    'dispatch_mode' => 2,
    //...
];

Test.

TCP: telnet 127.0.0.1 5291

UDP: [Linux] echo "Hello LaravelS" > /dev/udp/127.0.0.1/5292

Register example of other protocols.

  • UDP
'sockets' => [
    [
        'host'     => '0.0.0.0',
        'port'     => 5292,
        'type'     => SWOOLE_SOCK_UDP,
        'settings' => [
            'open_eof_check' => true,
            'package_eof'    => "\r\n",
        ],
        'handler'  => \App\Sockets\TestUdpSocket::class,
    ],
],
  • Http
'sockets' => [
    [
        'host'     => '0.0.0.0',
        'port'     => 5293,
        'type'     => SWOOLE_SOCK_TCP,
        'settings' => [
            'open_http_protocol' => true,
        ],
        'handler'  => \App\Sockets\TestHttp::class,
    ],
],
  • WebSocket: The main server must turn on WebSocket, that is, set websocket.enable to true.
'sockets' => [
    [
        'host'     => '0.0.0.0',
        'port'     => 5294,
        'type'     => SWOOLE_SOCK_TCP,
        'settings' => [
            'open_http_protocol'      => true,
            'open_websocket_protocol' => true,
        ],
        'handler'  => \App\Sockets\TestWebSocket::class,
    ],
],

Coroutine

Swoole Coroutine

Warning: The order of code execution in the coroutine is out of order. The data of the request level should be isolated by the coroutine ID. However, there are many singleton and static attributes in Laravel/Lumen, the data between different requests will affect each other, it's Unsafe. For example, the database connection is a singleton, the same database connection shares the same PDO resource. This is fine in the synchronous blocking mode, but it does not work in the asynchronous coroutine mode. Each query needs to create different connections and maintain IO state of different connections, which requires a connection pool.

DO NOT enable the coroutine, only the custom process can use the coroutine.

Custom process

Support developers to create special work processes for monitoring, reporting, or other special tasks. Refer addProcess.

Create Proccess class, implements CustomProcessInterface.

namespace App\Processes;
use App\Tasks\TestTask;
use Hhxsv5\LaravelS\Swoole\Process\CustomProcessInterface;
use Hhxsv5\LaravelS\Swoole\Task\Task;
use Swoole\Coroutine;
use Swoole\Http\Server;
use Swoole\Process;
class TestProcess implements CustomProcessInterface
{
    /**
     * @var bool Quit tag for Reload updates
     */
    private static $quit = false;

    public static function callback(Server $swoole, Process $process)
    {
        // The callback method cannot exit. Once exited, Manager process will automatically create the process 
        while (!self::$quit) {
            \Log::info('Test process: running');
            // sleep(1); // Swoole < 2.1
            Coroutine::sleep(1); // Swoole>=2.1: Coroutine & Runtime will be automatically enabled for callback().
             // Deliver task in custom process, but NOT support callback finish() of task.
            // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
            $ret = Task::deliver(new TestTask('task data'));
            var_dump($ret);
            // The upper layer will catch the exception thrown in the callback and record it in the Swoole log, and then this process will exit. The Manager process will re-create the process after 3 seconds, so developers need to try/catch to catch the exception by themselves to avoid frequent process creation.
            // throw new \Exception('an exception');
        }
    }
    // Requirements: LaravelS >= v3.4.0 & callback() must be async non-blocking program.
    public static function onReload(Server $swoole, Process $process)
    {
        // Stop the process...
        // Then end process
        \Log::info('Test process: reloading');
        self::$quit = true;
        // $process->exit(0); // Force exit process
    }
    // Requirements: LaravelS >= v3.7.4 & callback() must be async non-blocking program.
    public static function onStop(Server $swoole, Process $process)
    {
        // Stop the process...
        // Then end process
        \Log::info('Test process: stopping');
        self::$quit = true;
        // $process->exit(0); // Force exit process
    }
}

Register TestProcess.

// Edit `config/laravels.php`
// ...
'processes' => [
    'test' => [ // Key name is process name
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false, // Whether redirect stdin/stdout, true or false
        'pipe'     => 0,     // The type of pipeline, 0: no pipeline 1: SOCK_STREAM 2: SOCK_DGRAM
        'enable'   => true,  // Whether to enable, default true
        //'num'    => 3   // To create multiple processes of this class, default is 1
        //'queue'    => [ // Enable message queue as inter-process communication, configure empty array means use default parameters
        //    'msg_key'  => 0,    // The key of the message queue. Default: ftok(__FILE__, 1).
        //    'mode'     => 2,    // Communication mode, default is 2, which means contention mode
        //    'capacity' => 8192, // The length of a single message, is limited by the operating system kernel parameters. The default is 8192, and the maximum is 65536
        //],
        //'restart_interval' => 5, // After the process exits abnormally, how many seconds to wait before restarting the process, default 5 seconds
    ],
],

Note: The callback() cannot quit. If quit, the Manager process will re-create the process.

Example: Write data to a custom process.

// config/laravels.php
'processes' => [
    'test' => [
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false,
        'pipe'     => 1,
    ],
],
// app/Processes/TestProcess.php
public static function callback(Server $swoole, Process $process)
{
    while ($data = $process->read()) {
        \Log::info('TestProcess: read data', [$data]);
        $process->write('TestProcess: ' . $data);
    }
}
// app/Http/Controllers/TestController.php
public function testProcessWrite()
{
    /**@var \Swoole\Process $process */
    $process = app('swoole')->customProcesses['test'];
    $process->write('TestController: write data' . time());
    var_dump($process->read());
}

Common components

Apollo

LaravelS will pull the Apollo configuration and write it to the .env file when starting. At the same time, LaravelS will start the custom process apollo to monitor the configuration and automatically reload when the configuration changes.

Enable Apollo: add --enable-apollo and Apollo parameters to the startup parameters.

php bin/laravels start --enable-apollo --apollo-server=http://127.0.0.1:8080 --apollo-app-id=LARAVEL-S-TEST

Support hot updates(optional).

// Edit `config/laravels.php`
'processes' => Hhxsv5\LaravelS\Components\Apollo\Process::getDefinition(),
// When there are other custom process configurations
'processes' => [
    'test' => [
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false,
        'pipe'     => 1,
    ],
    // ...
] + Hhxsv5\LaravelS\Components\Apollo\Process::getDefinition(),

List of available parameters.

ParameterDescriptionDefaultDemo
apollo-serverApollo server URL---apollo-server=http://127.0.0.1:8080
apollo-app-idApollo APP ID---apollo-app-id=LARAVEL-S-TEST
apollo-namespacesThe namespace to which the APP belongs, support specify the multipleapplication--apollo-namespaces=application --apollo-namespaces=env
apollo-clusterThe cluster to which the APP belongsdefault--apollo-cluster=default
apollo-client-ipIP of current instance, can also be used for grayscale publishingLocal intranet IP--apollo-client-ip=10.2.1.83
apollo-pull-timeoutTimeout time(seconds) when pulling configuration5--apollo-pull-timeout=5
apollo-backup-old-envWhether to backup the old configuration file when updating the configuration file .envfalse--apollo-backup-old-env

Prometheus

Support Prometheus monitoring and alarm, Grafana visually view monitoring metrics. Please refer to Docker Compose for the environment construction of Prometheus and Grafana.

Require extension APCu >= 5.0.0, please install it by pecl install apcu.

Copy the configuration file prometheus.php to the config directory of your project. Modify the configuration as appropriate.

# Execute commands in the project root directory
cp vendor/hhxsv5/laravel-s/config/prometheus.php config/

If your project is Lumen, you also need to manually load the configuration $app->configure('prometheus'); in bootstrap/app.php.

Configure global middleware: Hhxsv5\LaravelS\Components\Prometheus\RequestMiddleware::class. In order to count the request time consumption as accurately as possible, RequestMiddleware must be the first global middleware, which needs to be placed in front of other middleware.

Register ServiceProvider: Hhxsv5\LaravelS\Components\Prometheus\ServiceProvider::class.

Configure the CollectorProcess in config/laravels.php to collect the metrics of Swoole Worker/Task/Timer processes regularly.

'processes' => Hhxsv5\LaravelS\Components\Prometheus\CollectorProcess::getDefinition(),

Create the route to output metrics.

use Hhxsv5\LaravelS\Components\Prometheus\Exporter;

Route::get('/actuator/prometheus', function () {
    $result = app(Exporter::class)->render();
    return response($result, 200, ['Content-Type' => Exporter::REDNER_MIME_TYPE]);
});

Complete the configuration of Prometheus and start it.

global:
  scrape_interval: 5s
  scrape_timeout: 5s
  evaluation_interval: 30s
scrape_configs:
- job_name: laravel-s-test
  honor_timestamps: true
  metrics_path: /actuator/prometheus
  scheme: http
  follow_redirects: true
  static_configs:
  - targets:
    - 127.0.0.1:5200 # The ip and port of the monitored service
# Dynamically discovered using one of the supported service-discovery mechanisms
# https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config
# - job_name: laravels-eureka
#   honor_timestamps: true
#   scrape_interval: 5s
#   metrics_path: /actuator/prometheus
#   scheme: http
#   follow_redirects: true
  # eureka_sd_configs:
  # - server: http://127.0.0.1:8080/eureka
  #   follow_redirects: true
  #   refresh_interval: 5s

Start Grafana, then import panel json.

Grafana Dashboard

Other features

Configure Swoole events

Supported events:

EventInterfaceWhen happened
ServerStartHhxsv5\LaravelS\Swoole\Events\ServerStartInterfaceOccurs when the Master process is starting, this event should not handle complex business logic, and can only do some simple work of initialization.
ServerStopHhxsv5\LaravelS\Swoole\Events\ServerStopInterfaceOccurs when the server exits normally, CANNOT use async or coroutine related APIs in this event.
WorkerStartHhxsv5\LaravelS\Swoole\Events\WorkerStartInterfaceOccurs after the Worker/Task process is started, and the Laravel initialization has been completed.
WorkerStopHhxsv5\LaravelS\Swoole\Events\WorkerStopInterfaceOccurs after the Worker/Task process exits normally
WorkerErrorHhxsv5\LaravelS\Swoole\Events\WorkerErrorInterfaceOccurs when an exception or fatal error occurs in the Worker/Task process

1.Create an event class to implement the corresponding interface.

namespace App\Events;
use Hhxsv5\LaravelS\Swoole\Events\ServerStartInterface;
use Swoole\Atomic;
use Swoole\Http\Server;
class ServerStartEvent implements ServerStartInterface
{
    public function __construct()
    {
    }
    public function handle(Server $server)
    {
        // Initialize a global counter (available across processes)
        $server->atomicCount = new Atomic(2233);

        // Invoked in controller: app('swoole')->atomicCount->get();
    }
}
namespace App\Events;
use Hhxsv5\LaravelS\Swoole\Events\WorkerStartInterface;
use Swoole\Http\Server;
class WorkerStartEvent implements WorkerStartInterface
{
    public function __construct()
    {
    }
    public function handle(Server $server, $workerId)
    {
        // Initialize a database connection pool
        // DatabaseConnectionPool::init();
    }
}

2.Configuration.

// Edit `config/laravels.php`
'event_handlers' => [
    'ServerStart' => [\App\Events\ServerStartEvent::class], // Trigger events in array order
    'WorkerStart' => [\App\Events\WorkerStartEvent::class],
],

Serverless

Alibaba Cloud Function Compute

Function Compute.

1.Modify bootstrap/app.php and set the storage directory. Because the project directory is read-only, the /tmp directory can only be read and written.

$app->useStoragePath(env('APP_STORAGE_PATH', '/tmp/storage'));

2.Create a shell script laravels_bootstrap and grant executable permission.

#!/usr/bin/env bash
set +e

# Create storage-related directories
mkdir -p /tmp/storage/app/public
mkdir -p /tmp/storage/framework/cache
mkdir -p /tmp/storage/framework/sessions
mkdir -p /tmp/storage/framework/testing
mkdir -p /tmp/storage/framework/views
mkdir -p /tmp/storage/logs

# Set the environment variable APP_STORAGE_PATH, please make sure it's the same as APP_STORAGE_PATH in .env
export APP_STORAGE_PATH=/tmp/storage

# Start LaravelS
php bin/laravels start

3.Configure template.xml.

ROSTemplateFormatVersion: '2015-09-01'
Transform: 'Aliyun::Serverless-2018-04-03'
Resources:
  laravel-s-demo:
    Type: 'Aliyun::Serverless::Service'
    Properties:
      Description: 'LaravelS Demo for Serverless'
    fc-laravel-s:
      Type: 'Aliyun::Serverless::Function'
      Properties:
        Handler: laravels.handler
        Runtime: custom
        MemorySize: 512
        Timeout: 30
        CodeUri: ./
        InstanceConcurrency: 10
        EnvironmentVariables:
          BOOTSTRAP_FILE: laravels_bootstrap

Important notices

Singleton Issue

Under FPM mode, singleton instances will be instantiated and recycled in every request, request start=>instantiate instance=>request end=>recycled instance.

Under Swoole Server, All singleton instances will be held in memory, different lifetime from FPM, request start=>instantiate instance=>request end=>do not recycle singleton instance. So need developer to maintain status of singleton instances in every request.

Common solutions:

Write a XxxCleaner class to clean up the singleton object state. This class implements the interface Hhxsv5\LaravelS\Illuminate\Cleaners\CleanerInterface and then registers it in cleaners of laravels.php.

Reset status of singleton instances by Middleware.

Re-register ServiceProvider, add XxxServiceProvider into register_providers of file laravels.php. So that reinitialize singleton instances in every request Refer.

Cleaners

Configuration cleaners.

Known issues

Known issues: a package of known issues and solutions.

Debugging method

Logging; if you want to output to the console, you can use stderr, Log::channel('stderr')->debug('debug message').

Laravel Dump Server(Laravel 5.7 has been integrated by default).

Read request

Read request by Illuminate\Http\Request Object, $_ENV is readable, $_SERVER is partially readable, CANNOT USE $_GET/$_POST/$_FILES/$_COOKIE/$_REQUEST/$_SESSION/$GLOBALS.

public function form(\Illuminate\Http\Request $request)
{
    $name = $request->input('name');
    $all = $request->all();
    $sessionId = $request->cookie('sessionId');
    $photo = $request->file('photo');
    // Call getContent() to get the raw POST body, instead of file_get_contents('php://input')
    $rawContent = $request->getContent();
    //...
}

Output response

Respond by Illuminate\Http\Response Object, compatible with echo/vardump()/print_r(),CANNOT USE functions dd()/exit()/die()/header()/setcookie()/http_response_code().

public function json()
{
    return response()->json(['time' => time()])->header('header1', 'value1')->withCookie('c1', 'v1');
}

Persistent connection

Singleton connection will be resident in memory, it is recommended to turn on persistent connection for better performance.

  1. Database connection, it will reconnect automatically immediately after disconnect.
// config/database.php
'connections' => [
    'my_conn' => [
        'driver'    => 'mysql',
        'host'      => env('DB_MY_CONN_HOST', 'localhost'),
        'port'      => env('DB_MY_CONN_PORT', 3306),
        'database'  => env('DB_MY_CONN_DATABASE', 'forge'),
        'username'  => env('DB_MY_CONN_USERNAME', 'forge'),
        'password'  => env('DB_MY_CONN_PASSWORD', ''),
        'charset'   => 'utf8mb4',
        'collation' => 'utf8mb4_unicode_ci',
        'prefix'    => '',
        'strict'    => false,
        'options'   => [
            // Enable persistent connection
            \PDO::ATTR_PERSISTENT => true,
        ],
    ],
],
  1. Redis connection, it won't reconnect automatically immediately after disconnect, and will throw an exception about lost connection, reconnect next time. You need to make sure that SELECT DB correctly before operating Redis every time.
// config/database.php
'redis' => [
    'client' => env('REDIS_CLIENT', 'phpredis'), // It is recommended to use phpredis for better performance.
    'default' => [
        'host'       => env('REDIS_HOST', 'localhost'),
        'password'   => env('REDIS_PASSWORD', null),
        'port'       => env('REDIS_PORT', 6379),
        'database'   => 0,
        'persistent' => true, // Enable persistent connection
    ],
],

About memory leaks

Avoid using global variables. If necessary, please clean or reset them manually.

Infinitely appending element into static/global variable will lead to OOM(Out of Memory).

class Test
{
    public static $array = [];
    public static $string = '';
}

// Controller
public function test(Request $req)
{
    // Out of Memory
    Test::$array[] = $req->input('param1');
    Test::$string .= $req->input('param2');
}

Memory leak detection method

Modify config/laravels.php: worker_num=1, max_request=1000000, remember to change it back after test;

Add routing /debug-memory-leak without route middleware to observe the memory changes of the Worker process;

Route::get('/debug-memory-leak', function () {
    global $previous;
    $current = memory_get_usage();
    $stats = [
        'prev_mem' => $previous,
        'curr_mem' => $current,
        'diff_mem' => $current - $previous,
    ];
    $previous = $current;
    return $stats;
});

Start LaravelS and request /debug-memory-leak until diff_mem is less than or equal to zero; if diff_mem is always greater than zero, it means that there may be a memory leak in Global Middleware or Laravel Framework;

After completing Step 3, alternately request the business routes and /debug-memory-leak (It is recommended to use ab/wrk to make a large number of requests for business routes), the initial increase in memory is normal. After a large number of requests for the business routes, if diff_mem is always greater than zero and curr_mem continues to increase, there is a high probability of memory leak; If curr_mem always changes within a certain range and does not continue to increase, there is a low probability of memory leak.

If you still can't solve it, max_request is the last guarantee.

Linux kernel parameter adjustment

Linux kernel parameter adjustment

Pressure test

Pressure test


Author: hhxsv5
Source Code: https://github.com/hhxsv5/laravel-s
License: MIT License

#laravel #php 

Veronica  Roob

Veronica Roob

1648869960

LaravelS: An Out-Of-The-Box Adapter Between Swoole and Laravel/Lumen

 _                               _  _____ 
| |                             | |/ ____|
| |     __ _ _ __ __ ___   _____| | (___  
| |    / _` | '__/ _` \ \ / / _ \ |\___ \ 
| |___| (_| | | | (_| |\ V /  __/ |____) |
|______\__,_|_|  \__,_| \_/ \___|_|_____/ 
                                           

🚀 LaravelS is an out-of-the-box adapter between Swoole and Laravel/Lumen.

Please Watch this repository to get the latest updates.

中文文档

Features

Built-in Http/WebSocket server

Multi-port mixed protocol

Custom process

Memory resident

Asynchronous event listening

Asynchronous task queue

Millisecond cron job

Common Components

Gracefully reload

Automatically reload after modifying code

Support Laravel/Lumen both, good compatibility

Simple & Out of the box

Benchmark

Which is the fastest web framework?

TechEmpower Framework Benchmarks

Requirements

DependencyRequirement
PHP>= 5.5.9 Recommend PHP7+
Swoole>= 1.7.19 No longer support PHP5 since 2.0.12 Recommend 4.5.0+
Laravel/Lumen>= 5.1 Recommend 8.0+

Install

1.Require package via Composer(packagist).

composer require "hhxsv5/laravel-s:~3.7.0" -vvv
# Make sure that your composer.lock file is under the VCS

2.Register service provider(pick one of two).

Laravel: in config/app.php file, Laravel 5.5+ supports package discovery automatically, you should skip this step

'providers' => [
    //...
    Hhxsv5\LaravelS\Illuminate\LaravelSServiceProvider::class,
],

Lumen: in bootstrap/app.php file

$app->register(Hhxsv5\LaravelS\Illuminate\LaravelSServiceProvider::class);

3.Publish configuration and binaries.

After upgrading LaravelS, you need to republish; click here to see the change notes of each version.

php artisan laravels publish
# Configuration: config/laravels.php
# Binary: bin/laravels bin/fswatch bin/inotify

4.Change config/laravels.php: listen_ip, listen_port, refer Settings.

5.Performance tuning

Adjust kernel parameters

Number of Workers: LaravelS uses Swoole's Synchronous IO mode, the larger the worker_num setting, the better the concurrency performance, but it will cause more memory usage and process switching overhead. If one request takes 100ms, in order to provide 1000QPS concurrency, at least 100 Worker processes need to be configured. The calculation method is: worker_num = 1000QPS/(1s/1ms) = 100, so incremental pressure testing is needed to calculate the best worker_num.

Number of Task Workers

Run

Please read the notices carefully before running, Important notices(IMPORTANT).

  • Commands: php bin/laravels {start|stop|restart|reload|info|help}.
CommandDescription
startStart LaravelS, list the processes by "ps -ef|grep laravels"
stopStop LaravelS, and trigger the method onStop of Custom process
restartRestart LaravelS: Stop gracefully before starting; The service is unavailable until startup is complete
reloadReload all Task/Worker/Timer processes which contain your business codes, and trigger the method onReload of Custom process, CANNOT reload Master/Manger processes. After modifying config/laravels.php, you only have to call restart to restart
infoDisplay component version information
helpDisplay help information
  • Boot options for the commands start and restart.
OptionDescription
-d|--daemonizeRun as a daemon, this option will override the swoole.daemonize setting in laravels.php
-e|--envThe environment the command should run under, such as --env=testing will use the configuration file .env.testing firstly, this feature requires Laravel 5.2+
-i|--ignoreIgnore checking PID file of Master process
-x|--x-versionThe version(branch) of the current project, stored in $_ENV/$_SERVER, access via $_ENV['X_VERSION'] $_SERVER['X_VERSION'] $request->server->get('X_VERSION')
  • Runtime files: start will automatically execute php artisan laravels config and generate these files, developers generally don't need to pay attention to them, it's recommended to add them to .gitignore.
FileDescription
storage/laravels.confLaravelS's runtime configuration file
storage/laravels.pidPID file of Master process
storage/laravels-timer-process.pidPID file of the Timer process
storage/laravels-custom-processes.pidPID file of all custom processes

Deploy

It is recommended to supervise the main process through Supervisord, the premise is without option -d and to set swoole.daemonize to false.

[program:laravel-s-test]
directory=/var/www/laravel-s-test
command=/usr/local/bin/php bin/laravels start -i
numprocs=1
autostart=true
autorestart=true
startretries=3
user=www-data
redirect_stderr=true
stdout_logfile=/var/log/supervisor/%(program_name)s.log

Cooperate with Nginx (Recommended)

Demo.

gzip on;
gzip_min_length 1024;
gzip_comp_level 2;
gzip_types text/plain text/css text/javascript application/json application/javascript application/x-javascript application/xml application/x-httpd-php image/jpeg image/gif image/png font/ttf font/otf image/svg+xml;
gzip_vary on;
gzip_disable "msie6";
upstream swoole {
    # Connect IP:Port
    server 127.0.0.1:5200 weight=5 max_fails=3 fail_timeout=30s;
    # Connect UnixSocket Stream file, tips: put the socket file in the /dev/shm directory to get better performance
    #server unix:/yourpath/laravel-s-test/storage/laravels.sock weight=5 max_fails=3 fail_timeout=30s;
    #server 192.168.1.1:5200 weight=3 max_fails=3 fail_timeout=30s;
    #server 192.168.1.2:5200 backup;
    keepalive 16;
}
server {
    listen 80;
    # Don't forget to bind the host
    server_name laravels.com;
    root /yourpath/laravel-s-test/public;
    access_log /yourpath/log/nginx/$server_name.access.log  main;
    autoindex off;
    index index.html index.htm;
    # Nginx handles the static resources(recommend enabling gzip), LaravelS handles the dynamic resource.
    location / {
        try_files $uri @laravels;
    }
    # Response 404 directly when request the PHP file, to avoid exposing public/*.php
    #location ~* \.php$ {
    #    return 404;
    #}
    location @laravels {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout 120s;
        proxy_http_version 1.1;
        proxy_set_header Connection "";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        # "swoole" is the upstream
        proxy_pass http://swoole;
    }
}

Cooperate with Apache

LoadModule proxy_module /yourpath/modules/mod_proxy.so
LoadModule proxy_balancer_module /yourpath/modules/mod_proxy_balancer.so
LoadModule lbmethod_byrequests_module /yourpath/modules/mod_lbmethod_byrequests.so
LoadModule proxy_http_module /yourpath/modules/mod_proxy_http.so
LoadModule slotmem_shm_module /yourpath/modules/mod_slotmem_shm.so
LoadModule rewrite_module /yourpath/modules/mod_rewrite.so
LoadModule remoteip_module /yourpath/modules/mod_remoteip.so
LoadModule deflate_module /yourpath/modules/mod_deflate.so

<IfModule deflate_module>
    SetOutputFilter DEFLATE
    DeflateCompressionLevel 2
    AddOutputFilterByType DEFLATE text/html text/plain text/css text/javascript application/json application/javascript application/x-javascript application/xml application/x-httpd-php image/jpeg image/gif image/png font/ttf font/otf image/svg+xml
</IfModule>

<VirtualHost *:80>
    # Don't forget to bind the host
    ServerName www.laravels.com
    ServerAdmin hhxsv5@sina.com

    DocumentRoot /yourpath/laravel-s-test/public;
    DirectoryIndex index.html index.htm
    <Directory "/">
        AllowOverride None
        Require all granted
    </Directory>

    RemoteIPHeader X-Forwarded-For

    ProxyRequests Off
    ProxyPreserveHost On
    <Proxy balancer://laravels>  
        BalancerMember http://192.168.1.1:5200 loadfactor=7
        #BalancerMember http://192.168.1.2:5200 loadfactor=3
        #BalancerMember http://192.168.1.3:5200 loadfactor=1 status=+H
        ProxySet lbmethod=byrequests
    </Proxy>
    #ProxyPass / balancer://laravels/
    #ProxyPassReverse / balancer://laravels/

    # Apache handles the static resources, LaravelS handles the dynamic resource.
    RewriteEngine On
    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} !-d
    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} !-f
    RewriteRule ^/(.*)$ balancer://laravels%{REQUEST_URI} [P,L]

    ErrorLog ${APACHE_LOG_DIR}/www.laravels.com.error.log
    CustomLog ${APACHE_LOG_DIR}/www.laravels.com.access.log combined
</VirtualHost>

Enable WebSocket server

The Listening address of WebSocket Sever is the same as Http Server.

1.Create WebSocket Handler class, and implement interface WebSocketHandlerInterface.The instant is automatically instantiated when start, you do not need to manually create it.

namespace App\Services;
use Hhxsv5\LaravelS\Swoole\WebSocketHandlerInterface;
use Swoole\Http\Request;
use Swoole\Http\Response;
use Swoole\WebSocket\Frame;
use Swoole\WebSocket\Server;
/**
 * @see https://www.swoole.co.uk/docs/modules/swoole-websocket-server
 */
class WebSocketService implements WebSocketHandlerInterface
{
    // Declare constructor without parameters
    public function __construct()
    {
    }
    // public function onHandShake(Request $request, Response $response)
    // {
           // Custom handshake: https://www.swoole.co.uk/docs/modules/swoole-websocket-server-on-handshake
           // The onOpen event will be triggered automatically after a successful handshake
    // }
    public function onOpen(Server $server, Request $request)
    {
        // Before the onOpen event is triggered, the HTTP request to establish the WebSocket has passed the Laravel route,
        // so Laravel's Request, Auth information are readable, Session is readable and writable, but only in the onOpen event.
        // \Log::info('New WebSocket connection', [$request->fd, request()->all(), session()->getId(), session('xxx'), session(['yyy' => time()])]);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $server->push($request->fd, 'Welcome to LaravelS');
    }
    public function onMessage(Server $server, Frame $frame)
    {
        // \Log::info('Received message', [$frame->fd, $frame->data, $frame->opcode, $frame->finish]);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $server->push($frame->fd, date('Y-m-d H:i:s'));
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

2.Modify config/laravels.php.

// ...
'websocket'      => [
    'enable'  => true, // Note: set enable to true
    'handler' => \App\Services\WebSocketService::class,
],
'swoole'         => [
    //...
    // Must set dispatch_mode in (2, 4, 5), see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
    'dispatch_mode' => 2,
    //...
],
// ...

3.Use SwooleTable to bind FD & UserId, optional, Swoole Table Demo. Also you can use the other global storage services, like Redis/Memcached/MySQL, but be careful that FD will be possible conflicting between multiple Swoole Servers.

4.Cooperate with Nginx (Recommended)

Refer WebSocket Proxy

map $http_upgrade $connection_upgrade {
    default upgrade;
    ''      close;
}
upstream swoole {
    # Connect IP:Port
    server 127.0.0.1:5200 weight=5 max_fails=3 fail_timeout=30s;
    # Connect UnixSocket Stream file, tips: put the socket file in the /dev/shm directory to get better performance
    #server unix:/yourpath/laravel-s-test/storage/laravels.sock weight=5 max_fails=3 fail_timeout=30s;
    #server 192.168.1.1:5200 weight=3 max_fails=3 fail_timeout=30s;
    #server 192.168.1.2:5200 backup;
    keepalive 16;
}
server {
    listen 80;
    # Don't forget to bind the host
    server_name laravels.com;
    root /yourpath/laravel-s-test/public;
    access_log /yourpath/log/nginx/$server_name.access.log  main;
    autoindex off;
    index index.html index.htm;
    # Nginx handles the static resources(recommend enabling gzip), LaravelS handles the dynamic resource.
    location / {
        try_files $uri @laravels;
    }
    # Response 404 directly when request the PHP file, to avoid exposing public/*.php
    #location ~* \.php$ {
    #    return 404;
    #}
    # Http and WebSocket are concomitant, Nginx identifies them by "location"
    # !!! The location of WebSocket is "/ws"
    # Javascript: var ws = new WebSocket("ws://laravels.com/ws");
    location =/ws {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout: Nginx will close the connection if the proxied server does not send data to Nginx in 60 seconds; At the same time, this close behavior is also affected by heartbeat setting of Swoole.
        # proxy_read_timeout 60s;
        proxy_http_version 1.1;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection $connection_upgrade;
        proxy_pass http://swoole;
    }
    location @laravels {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout 60s;
        proxy_http_version 1.1;
        proxy_set_header Connection "";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_pass http://swoole;
    }
}

5.Heartbeat setting

Heartbeat setting of Swoole

// config/laravels.php
'swoole' => [
    //...
    // All connections are traversed every 60 seconds. If a connection does not send any data to the server within 600 seconds, the connection will be forced to close.
    'heartbeat_idle_time'      => 600,
    'heartbeat_check_interval' => 60,
    //...
],

Proxy read timeout of Nginx

# Nginx will close the connection if the proxied server does not send data to Nginx in 60 seconds
proxy_read_timeout 60s;

6.Push data in controller

namespace App\Http\Controllers;
class TestController extends Controller
{
    public function push()
    {
        $fd = 1; // Find fd by userId from a map [userId=>fd].
        /**@var \Swoole\WebSocket\Server $swoole */
        $swoole = app('swoole');
        $success = $swoole->push($fd, 'Push data to fd#1 in Controller');
        var_dump($success);
    }
}

Listen events

System events

Usually, you can reset/destroy some global/static variables, or change the current Request/Response object.

laravels.received_request After LaravelS parsed Swoole\Http\Request to Illuminate\Http\Request, before Laravel's Kernel handles this request.

// Edit file `app/Providers/EventServiceProvider.php`, add the following code into method `boot`
// If no variable $events, you can also call Facade \Event::listen(). 
$events->listen('laravels.received_request', function (\Illuminate\Http\Request $req, $app) {
    $req->query->set('get_key', 'hhxsv5');// Change query of request
    $req->request->set('post_key', 'hhxsv5'); // Change post of request
});

laravels.generated_response After Laravel's Kernel handled the request, before LaravelS parses Illuminate\Http\Response to Swoole\Http\Response.

// Edit file `app/Providers/EventServiceProvider.php`, add the following code into method `boot`
// If no variable $events, you can also call Facade \Event::listen(). 
$events->listen('laravels.generated_response', function (\Illuminate\Http\Request $req, \Symfony\Component\HttpFoundation\Response $rsp, $app) {
    $rsp->headers->set('header-key', 'hhxsv5');// Change header of response
});

Customized asynchronous events

This feature depends on AsyncTask of Swoole, your need to set swoole.task_worker_num in config/laravels.php firstly. The performance of asynchronous event processing is influenced by number of Swoole task process, you need to set task_worker_num appropriately.

1.Create event class.

use Hhxsv5\LaravelS\Swoole\Task\Event;
class TestEvent extends Event
{
    protected $listeners = [
        // Listener list
        TestListener1::class,
        // TestListener2::class,
    ];
    private $data;
    public function __construct($data)
    {
        $this->data = $data;
    }
    public function getData()
    {
        return $this->data;
    }
}

2.Create listener class.

use Hhxsv5\LaravelS\Swoole\Task\Task;
use Hhxsv5\LaravelS\Swoole\Task\Listener;
class TestListener1 extends Listener
{
    /**
     * @var TestEvent
     */
    protected $event;
    
    public function handle()
    {
        \Log::info(__CLASS__ . ':handle start', [$this->event->getData()]);
        sleep(2);// Simulate the slow codes
        // Deliver task in CronJob, but NOT support callback finish() of task.
        // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
        $ret = Task::deliver(new TestTask('task data'));
        var_dump($ret);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

3.Fire event.

// Create instance of event and fire it, "fire" is asynchronous.
use Hhxsv5\LaravelS\Swoole\Task\Event;
$event = new TestEvent('event data');
// $event->delay(10); // Delay 10 seconds to fire event
// $event->setTries(3); // When an error occurs, try 3 times in total
$success = Event::fire($event);
var_dump($success);// Return true if sucess, otherwise false

Asynchronous task queue

This feature depends on AsyncTask of Swoole, your need to set swoole.task_worker_num in config/laravels.php firstly. The performance of task processing is influenced by number of Swoole task process, you need to set task_worker_num appropriately.

1.Create task class.

use Hhxsv5\LaravelS\Swoole\Task\Task;
class TestTask extends Task
{
    private $data;
    private $result;
    public function __construct($data)
    {
        $this->data = $data;
    }
    // The logic of task handling, run in task process, CAN NOT deliver task
    public function handle()
    {
        \Log::info(__CLASS__ . ':handle start', [$this->data]);
        sleep(2);// Simulate the slow codes
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $this->result = 'the result of ' . $this->data;
    }
    // Optional, finish event, the logic of after task handling, run in worker process, CAN deliver task 
    public function finish()
    {
        \Log::info(__CLASS__ . ':finish start', [$this->result]);
        Task::deliver(new TestTask2('task2 data')); // Deliver the other task
    }
}

2.Deliver task.

// Create instance of TestTask and deliver it, "deliver" is asynchronous.
use Hhxsv5\LaravelS\Swoole\Task\Task;
$task = new TestTask('task data');
// $task->delay(3);// delay 3 seconds to deliver task
// $task->setTries(3); // When an error occurs, try 3 times in total
$ret = Task::deliver($task);
var_dump($ret);// Return true if sucess, otherwise false

Millisecond cron job

Wrapper cron job base on Swoole's Millisecond Timer, replace Linux Crontab.

1.Create cron job class.

namespace App\Jobs\Timer;
use App\Tasks\TestTask;
use Swoole\Coroutine;
use Hhxsv5\LaravelS\Swoole\Task\Task;
use Hhxsv5\LaravelS\Swoole\Timer\CronJob;
class TestCronJob extends CronJob
{
    protected $i = 0;
    // !!! The `interval` and `isImmediate` of cron job can be configured in two ways(pick one of two): one is to overload the corresponding method, and the other is to pass parameters when registering cron job.
    // --- Override the corresponding method to return the configuration: begin
    public function interval()
    {
        return 1000;// Run every 1000ms
    }
    public function isImmediate()
    {
        return false;// Whether to trigger `run` immediately after setting up
    }
    // --- Override the corresponding method to return the configuration: end
    public function run()
    {
        \Log::info(__METHOD__, ['start', $this->i, microtime(true)]);
        // do something
        // sleep(1); // Swoole < 2.1
        Coroutine::sleep(1); // Swoole>=2.1 Coroutine will be automatically created for run().
        $this->i++;
        \Log::info(__METHOD__, ['end', $this->i, microtime(true)]);

        if ($this->i >= 10) { // Run 10 times only
            \Log::info(__METHOD__, ['stop', $this->i, microtime(true)]);
            $this->stop(); // Stop this cron job, but it will run again after restart/reload.
            // Deliver task in CronJob, but NOT support callback finish() of task.
            // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
            $ret = Task::deliver(new TestTask('task data'));
            var_dump($ret);
        }
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

2.Register cron job.

// Register cron jobs in file "config/laravels.php"
[
    // ...
    'timer'          => [
        'enable' => true, // Enable Timer
        'jobs'   => [ // The list of cron job
            // Enable LaravelScheduleJob to run `php artisan schedule:run` every 1 minute, replace Linux Crontab
            // \Hhxsv5\LaravelS\Illuminate\LaravelScheduleJob::class,
            // Two ways to configure parameters:
            // [\App\Jobs\Timer\TestCronJob::class, [1000, true]], // Pass in parameters when registering
            \App\Jobs\Timer\TestCronJob::class, // Override the corresponding method to return the configuration
        ],
        'max_wait_time' => 5, // Max waiting time of reloading
        // Enable the global lock to ensure that only one instance starts the timer when deploying multiple instances. This feature depends on Redis, please see https://laravel.com/docs/7.x/redis
        'global_lock'     => false,
        'global_lock_key' => config('app.name', 'Laravel'),
    ],
    // ...
];

3.Note: it will launch multiple timers when build the server cluster, so you need to make sure that launch one timer only to avoid running repetitive task.

4.LaravelS v3.4.0 starts to support the hot restart [Reload] Timer process. After LaravelS receives the SIGUSR1 signal, it waits for max_wait_time(default 5) seconds to end the process, then the Manager process will pull up the Timer process again.

5.If you only need to use minute-level scheduled tasks, it is recommended to enable Hhxsv5\LaravelS\Illuminate\LaravelScheduleJob instead of Linux Crontab, so that you can follow the coding habits of Laravel task scheduling and configure Kernel.

// app/Console/Kernel.php
protected function schedule(Schedule $schedule)
{
    // runInBackground() will start a new child process to execute the task. This is asynchronous and will not affect the execution timing of other tasks.
    $schedule->command(TestCommand::class)->runInBackground()->everyMinute();
}

Automatically reload after modifying code

Via inotify, support Linux only.

1.Install inotify extension.

2.Turn on the switch in Settings.

3.Notice: Modify the file only in Linux to receive the file change events. It's recommended to use the latest Docker. Vagrant Solution.

Via fswatch, support OS X/Linux/Windows.

1.Install fswatch.

2.Run command in your project root directory.

# Watch current directory
./bin/fswatch
# Watch app directory
./bin/fswatch ./app

Via inotifywait, support Linux.

1.Install inotify-tools.

2.Run command in your project root directory.

# Watch current directory
./bin/inotify
# Watch app directory
./bin/inotify ./app

When the above methods does not work, the ultimate solution: set max_request=1,worker_num=1, so that Worker process will restart after processing a request. The performance of this method is very poor, so only development environment use.

Get the instance of SwooleServer in your project

/**
 * $swoole is the instance of `Swoole\WebSocket\Server` if enable WebSocket server, otherwise `Swoole\Http\Server`
 * @var \Swoole\WebSocket\Server|\Swoole\Http\Server $swoole
 */
$swoole = app('swoole');
var_dump($swoole->stats());
$swoole->push($fd, 'Push WebSocket message');

Use SwooleTable

1.Define Table, support multiple.

All defined tables will be created before Swoole starting.

// in file "config/laravels.php"
[
    // ...
    'swoole_tables'  => [
        // Scene:bind UserId & FD in WebSocket
        'ws' => [// The Key is table name, will add suffix "Table" to avoid naming conflicts. Here defined a table named "wsTable"
            'size'   => 102400,// The max size
            'column' => [// Define the columns
                ['name' => 'value', 'type' => \Swoole\Table::TYPE_INT, 'size' => 8],
            ],
        ],
        //...Define the other tables
    ],
    // ...
];

2.Access Table: all table instances will be bound on SwooleServer, access by app('swoole')->xxxTable.

namespace App\Services;
use Hhxsv5\LaravelS\Swoole\WebSocketHandlerInterface;
use Swoole\Http\Request;
use Swoole\WebSocket\Frame;
use Swoole\WebSocket\Server;
class WebSocketService implements WebSocketHandlerInterface
{
    /**@var \Swoole\Table $wsTable */
    private $wsTable;
    public function __construct()
    {
        $this->wsTable = app('swoole')->wsTable;
    }
    // Scene:bind UserId & FD in WebSocket
    public function onOpen(Server $server, Request $request)
    {
        // var_dump(app('swoole') === $server);// The same instance
        /**
         * Get the currently logged in user
         * This feature requires that the path to establish a WebSocket connection go through middleware such as Authenticate.
         * E.g:
         * Browser side: var ws = new WebSocket("ws://127.0.0.1:5200/ws");
         * Then the /ws route in Laravel needs to add the middleware like Authenticate.
         * Route::get('/ws', function () {
         *     // Respond any content with status code 200
         *     return 'websocket';
         * })->middleware(['auth']);
         */
        // $user = Auth::user();
        // $userId = $user ? $user->id : 0; // 0 means a guest user who is not logged in
        $userId = mt_rand(1000, 10000);
        // if (!$userId) {
        //     // Disconnect the connections of unlogged users
        //     $server->disconnect($request->fd);
        //     return;
        // }
        $this->wsTable->set('uid:' . $userId, ['value' => $request->fd]);// Bind map uid to fd
        $this->wsTable->set('fd:' . $request->fd, ['value' => $userId]);// Bind map fd to uid
        $server->push($request->fd, "Welcome to LaravelS #{$request->fd}");
    }
    public function onMessage(Server $server, Frame $frame)
    {
        // Broadcast
        foreach ($this->wsTable as $key => $row) {
            if (strpos($key, 'uid:') === 0 && $server->isEstablished($row['value'])) {
                $content = sprintf('Broadcast: new message "%s" from #%d', $frame->data, $frame->fd);
                $server->push($row['value'], $content);
            }
        }
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        $uid = $this->wsTable->get('fd:' . $fd);
        if ($uid !== false) {
            $this->wsTable->del('uid:' . $uid['value']); // Unbind uid map
        }
        $this->wsTable->del('fd:' . $fd);// Unbind fd map
        $server->push($fd, "Goodbye #{$fd}");
    }
}

Multi-port mixed protocol

For more information, please refer to Swoole Server AddListener

To make our main server support more protocols not just Http and WebSocket, we bring the feature multi-port mixed protocol of Swoole in LaravelS and name it Socket. Now, you can build TCP/UDP applications easily on top of Laravel.

Create Socket handler class, and extend Hhxsv5\LaravelS\Swoole\Socket\{TcpSocket|UdpSocket|Http|WebSocket}.

namespace App\Sockets;
use Hhxsv5\LaravelS\Swoole\Socket\TcpSocket;
use Swoole\Server;
class TestTcpSocket extends TcpSocket
{
    public function onConnect(Server $server, $fd, $reactorId)
    {
        \Log::info('New TCP connection', [$fd]);
        $server->send($fd, 'Welcome to LaravelS.');
    }
    public function onReceive(Server $server, $fd, $reactorId, $data)
    {
        \Log::info('Received data', [$fd, $data]);
        $server->send($fd, 'LaravelS: ' . $data);
        if ($data === "quit\r\n") {
            $server->send($fd, 'LaravelS: bye' . PHP_EOL);
            $server->close($fd);
        }
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        \Log::info('Close TCP connection', [$fd]);
        $server->send($fd, 'Goodbye');
    }
}

These Socket connections share the same worker processes with your HTTP/WebSocket connections. So it won't be a problem at all if you want to deliver tasks, use SwooleTable, even Laravel components such as DB, Eloquent and so on. At the same time, you can access Swoole\Server\Port object directly by member property swoolePort.

public function onReceive(Server $server, $fd, $reactorId, $data)
{
    $port = $this->swoolePort; // Get the `Swoole\Server\Port` object
}
namespace App\Http\Controllers;
class TestController extends Controller
{
    public function test()
    {
        /**@var \Swoole\Http\Server|\Swoole\WebSocket\Server $swoole */
        $swoole = app('swoole');
        // $swoole->ports: Traverse all Port objects, https://www.swoole.co.uk/docs/modules/swoole-server/multiple-ports
        $port = $swoole->ports[0]; // Get the `Swoole\Server\Port` object, $port[0] is the port of the main server
        foreach ($port->connections as $fd) { // Traverse all connections
            // $swoole->send($fd, 'Send tcp message');
            // if($swoole->isEstablished($fd)) {
            //     $swoole->push($fd, 'Send websocket message');
            // }
        }
    }
}

Register Sockets.

// Edit `config/laravels.php`
//...
'sockets' => [
    [
        'host'     => '127.0.0.1',
        'port'     => 5291,
        'type'     => SWOOLE_SOCK_TCP,// Socket type: SWOOLE_SOCK_TCP/SWOOLE_SOCK_TCP6/SWOOLE_SOCK_UDP/SWOOLE_SOCK_UDP6/SWOOLE_UNIX_DGRAM/SWOOLE_UNIX_STREAM
        'settings' => [// Swoole settings:https://www.swoole.co.uk/docs/modules/swoole-server-methods#swoole_server-addlistener
            'open_eof_check' => true,
            'package_eof'    => "\r\n",
        ],
        'handler'  => \App\Sockets\TestTcpSocket::class,
        'enable'   => true, // whether to enable, default true
    ],
],

About the heartbeat configuration, it can only be set on the main server and cannot be configured on Socket, but the Socket inherits the heartbeat configuration of the main server.

For TCP socket, onConnect and onClose events will be blocked when dispatch_mode of Swoole is 1/3, so if you want to unblock these two events please set dispatch_mode to 2/4/5.

'swoole' => [
    //...
    'dispatch_mode' => 2,
    //...
];

Test.

TCP: telnet 127.0.0.1 5291

UDP: [Linux] echo "Hello LaravelS" > /dev/udp/127.0.0.1/5292

Register example of other protocols.

  • UDP
  • Http
  • WebSocket: The main server must turn on WebSocket, that is, set websocket.enable to true.

Coroutine

Swoole Coroutine

Warning: The order of code execution in the coroutine is out of order. The data of the request level should be isolated by the coroutine ID. However, there are many singleton and static attributes in Laravel/Lumen, the data between different requests will affect each other, it's Unsafe. For example, the database connection is a singleton, the same database connection shares the same PDO resource. This is fine in the synchronous blocking mode, but it does not work in the asynchronous coroutine mode. Each query needs to create different connections and maintain IO state of different connections, which requires a connection pool.

DO NOT enable the coroutine, only the custom process can use the coroutine.

Custom process

Support developers to create special work processes for monitoring, reporting, or other special tasks. Refer addProcess.

Create Proccess class, implements CustomProcessInterface.

namespace App\Processes;
use App\Tasks\TestTask;
use Hhxsv5\LaravelS\Swoole\Process\CustomProcessInterface;
use Hhxsv5\LaravelS\Swoole\Task\Task;
use Swoole\Coroutine;
use Swoole\Http\Server;
use Swoole\Process;
class TestProcess implements CustomProcessInterface
{
    /**
     * @var bool Quit tag for Reload updates
     */
    private static $quit = false;

    public static function callback(Server $swoole, Process $process)
    {
        // The callback method cannot exit. Once exited, Manager process will automatically create the process 
        while (!self::$quit) {
            \Log::info('Test process: running');
            // sleep(1); // Swoole < 2.1
            Coroutine::sleep(1); // Swoole>=2.1: Coroutine & Runtime will be automatically enabled for callback().
             // Deliver task in custom process, but NOT support callback finish() of task.
            // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
            $ret = Task::deliver(new TestTask('task data'));
            var_dump($ret);
            // The upper layer will catch the exception thrown in the callback and record it in the Swoole log, and then this process will exit. The Manager process will re-create the process after 3 seconds, so developers need to try/catch to catch the exception by themselves to avoid frequent process creation.
            // throw new \Exception('an exception');
        }
    }
    // Requirements: LaravelS >= v3.4.0 & callback() must be async non-blocking program.
    public static function onReload(Server $swoole, Process $process)
    {
        // Stop the process...
        // Then end process
        \Log::info('Test process: reloading');
        self::$quit = true;
        // $process->exit(0); // Force exit process
    }
    // Requirements: LaravelS >= v3.7.4 & callback() must be async non-blocking program.
    public static function onStop(Server $swoole, Process $process)
    {
        // Stop the process...
        // Then end process
        \Log::info('Test process: stopping');
        self::$quit = true;
        // $process->exit(0); // Force exit process
    }
}

Register TestProcess.

// Edit `config/laravels.php`
// ...
'processes' => [
    'test' => [ // Key name is process name
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false, // Whether redirect stdin/stdout, true or false
        'pipe'     => 0,     // The type of pipeline, 0: no pipeline 1: SOCK_STREAM 2: SOCK_DGRAM
        'enable'   => true,  // Whether to enable, default true
        //'num'    => 3   // To create multiple processes of this class, default is 1
        //'queue'    => [ // Enable message queue as inter-process communication, configure empty array means use default parameters
        //    'msg_key'  => 0,    // The key of the message queue. Default: ftok(__FILE__, 1).
        //    'mode'     => 2,    // Communication mode, default is 2, which means contention mode
        //    'capacity' => 8192, // The length of a single message, is limited by the operating system kernel parameters. The default is 8192, and the maximum is 65536
        //],
        //'restart_interval' => 5, // After the process exits abnormally, how many seconds to wait before restarting the process, default 5 seconds
    ],
],

Note: The callback() cannot quit. If quit, the Manager process will re-create the process.

Example: Write data to a custom process.

// config/laravels.php
'processes' => [
    'test' => [
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false,
        'pipe'     => 1,
    ],
],
// app/Processes/TestProcess.php
public static function callback(Server $swoole, Process $process)
{
    while ($data = $process->read()) {
        \Log::info('TestProcess: read data', [$data]);
        $process->write('TestProcess: ' . $data);
    }
}
// app/Http/Controllers/TestController.php
public function testProcessWrite()
{
    /**@var \Swoole\Process $process */
    $process = app('swoole')->customProcesses['test'];
    $process->write('TestController: write data' . time());
    var_dump($process->read());
}

Common components

Apollo

LaravelS will pull the Apollo configuration and write it to the .env file when starting. At the same time, LaravelS will start the custom process apollo to monitor the configuration and automatically reload when the configuration changes.

Enable Apollo: add --enable-apollo and Apollo parameters to the startup parameters.

php bin/laravels start --enable-apollo --apollo-server=http://127.0.0.1:8080 --apollo-app-id=LARAVEL-S-TEST

Support hot updates(optional).

// Edit `config/laravels.php`
'processes' => Hhxsv5\LaravelS\Components\Apollo\Process::getDefinition(),
// When there are other custom process configurations
'processes' => [
    'test' => [
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false,
        'pipe'     => 1,
    ],
    // ...
] + Hhxsv5\LaravelS\Components\Apollo\Process::getDefinition(),

List of available parameters.

ParameterDescriptionDefaultDemo
apollo-serverApollo server URL---apollo-server=http://127.0.0.1:8080
apollo-app-idApollo APP ID---apollo-app-id=LARAVEL-S-TEST
apollo-namespacesThe namespace to which the APP belongs, support specify the multipleapplication--apollo-namespaces=application --apollo-namespaces=env
apollo-clusterThe cluster to which the APP belongsdefault--apollo-cluster=default
apollo-client-ipIP of current instance, can also be used for grayscale publishingLocal intranet IP--apollo-client-ip=10.2.1.83
apollo-pull-timeoutTimeout time(seconds) when pulling configuration5--apollo-pull-timeout=5
apollo-backup-old-envWhether to backup the old configuration file when updating the configuration file .envfalse--apollo-backup-old-env

Prometheus

Support Prometheus monitoring and alarm, Grafana visually view monitoring metrics. Please refer to Docker Compose for the environment construction of Prometheus and Grafana.

Require extension APCu >= 5.0.0, please install it by pecl install apcu.

Copy the configuration file prometheus.php to the config directory of your project. Modify the configuration as appropriate.

# Execute commands in the project root directory
cp vendor/hhxsv5/laravel-s/config/prometheus.php config/

If your project is Lumen, you also need to manually load the configuration $app->configure('prometheus'); in bootstrap/app.php.

Configure global middleware: Hhxsv5\LaravelS\Components\Prometheus\RequestMiddleware::class. In order to count the request time consumption as accurately as possible, RequestMiddleware must be the first global middleware, which needs to be placed in front of other middleware.

Register ServiceProvider: Hhxsv5\LaravelS\Components\Prometheus\ServiceProvider::class.

Configure the CollectorProcess in config/laravels.php to collect the metrics of Swoole Worker/Task/Timer processes regularly.

'processes' => Hhxsv5\LaravelS\Components\Prometheus\CollectorProcess::getDefinition(),

Create the route to output metrics.

use Hhxsv5\LaravelS\Components\Prometheus\Exporter;

Route::get('/actuator/prometheus', function () {
    $result = app(Exporter::class)->render();
    return response($result, 200, ['Content-Type' => Exporter::REDNER_MIME_TYPE]);
});

Complete the configuration of Prometheus and start it.

global:
  scrape_interval: 5s
  scrape_timeout: 5s
  evaluation_interval: 30s
scrape_configs:
- job_name: laravel-s-test
  honor_timestamps: true
  metrics_path: /actuator/prometheus
  scheme: http
  follow_redirects: true
  static_configs:
  - targets:
    - 127.0.0.1:5200 # The ip and port of the monitored service
# Dynamically discovered using one of the supported service-discovery mechanisms
# https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config
# - job_name: laravels-eureka
#   honor_timestamps: true
#   scrape_interval: 5s
#   metrics_path: /actuator/prometheus
#   scheme: http
#   follow_redirects: true
  # eureka_sd_configs:
  # - server: http://127.0.0.1:8080/eureka
  #   follow_redirects: true
  #   refresh_interval: 5s

Start Grafana, then import panel json.

Grafana Dashboard

Other features

Configure Swoole events

Supported events:

EventInterfaceWhen happened
ServerStartHhxsv5\LaravelS\Swoole\Events\ServerStartInterfaceOccurs when the Master process is starting, this event should not handle complex business logic, and can only do some simple work of initialization.
ServerStopHhxsv5\LaravelS\Swoole\Events\ServerStopInterfaceOccurs when the server exits normally, CANNOT use async or coroutine related APIs in this event.
WorkerStartHhxsv5\LaravelS\Swoole\Events\WorkerStartInterfaceOccurs after the Worker/Task process is started, and the Laravel initialization has been completed.
WorkerStopHhxsv5\LaravelS\Swoole\Events\WorkerStopInterfaceOccurs after the Worker/Task process exits normally
WorkerErrorHhxsv5\LaravelS\Swoole\Events\WorkerErrorInterfaceOccurs when an exception or fatal error occurs in the Worker/Task process

1.Create an event class to implement the corresponding interface.

namespace App\Events;
use Hhxsv5\LaravelS\Swoole\Events\ServerStartInterface;
use Swoole\Atomic;
use Swoole\Http\Server;
class ServerStartEvent implements ServerStartInterface
{
    public function __construct()
    {
    }
    public function handle(Server $server)
    {
        // Initialize a global counter (available across processes)
        $server->atomicCount = new Atomic(2233);

        // Invoked in controller: app('swoole')->atomicCount->get();
    }
}
namespace App\Events;
use Hhxsv5\LaravelS\Swoole\Events\WorkerStartInterface;
use Swoole\Http\Server;
class WorkerStartEvent implements WorkerStartInterface
{
    public function __construct()
    {
    }
    public function handle(Server $server, $workerId)
    {
        // Initialize a database connection pool
        // DatabaseConnectionPool::init();
    }
}

2.Configuration.

// Edit `config/laravels.php`
'event_handlers' => [
    'ServerStart' => [\App\Events\ServerStartEvent::class], // Trigger events in array order
    'WorkerStart' => [\App\Events\WorkerStartEvent::class],
],

Serverless

Alibaba Cloud Function Compute

Function Compute.

1.Modify bootstrap/app.php and set the storage directory. Because the project directory is read-only, the /tmp directory can only be read and written.

$app->useStoragePath(env('APP_STORAGE_PATH', '/tmp/storage'));

2.Create a shell script laravels_bootstrap and grant executable permission.

#!/usr/bin/env bash
set +e

# Create storage-related directories
mkdir -p /tmp/storage/app/public
mkdir -p /tmp/storage/framework/cache
mkdir -p /tmp/storage/framework/sessions
mkdir -p /tmp/storage/framework/testing
mkdir -p /tmp/storage/framework/views
mkdir -p /tmp/storage/logs

# Set the environment variable APP_STORAGE_PATH, please make sure it's the same as APP_STORAGE_PATH in .env
export APP_STORAGE_PATH=/tmp/storage

# Start LaravelS
php bin/laravels start

3.Configure template.xml.

ROSTemplateFormatVersion: '2015-09-01'
Transform: 'Aliyun::Serverless-2018-04-03'
Resources:
  laravel-s-demo:
    Type: 'Aliyun::Serverless::Service'
    Properties:
      Description: 'LaravelS Demo for Serverless'
    fc-laravel-s:
      Type: 'Aliyun::Serverless::Function'
      Properties:
        Handler: laravels.handler
        Runtime: custom
        MemorySize: 512
        Timeout: 30
        CodeUri: ./
        InstanceConcurrency: 10
        EnvironmentVariables:
          BOOTSTRAP_FILE: laravels_bootstrap

Important notices

Singleton Issue

Under FPM mode, singleton instances will be instantiated and recycled in every request, request start=>instantiate instance=>request end=>recycled instance.

Under Swoole Server, All singleton instances will be held in memory, different lifetime from FPM, request start=>instantiate instance=>request end=>do not recycle singleton instance. So need developer to maintain status of singleton instances in every request.

Common solutions:

Write a XxxCleaner class to clean up the singleton object state. This class implements the interface Hhxsv5\LaravelS\Illuminate\Cleaners\CleanerInterface and then registers it in cleaners of laravels.php.

Reset status of singleton instances by Middleware.

Re-register ServiceProvider, add XxxServiceProvider into register_providers of file laravels.php. So that reinitialize singleton instances in every request Refer.

Cleaners

Configuration cleaners.

Known issues

Known issues: a package of known issues and solutions.

Debugging method

Logging; if you want to output to the console, you can use stderr, Log::channel('stderr')->debug('debug message').

Laravel Dump Server(Laravel 5.7 has been integrated by default).

Read request

Read request by Illuminate\Http\Request Object, $_ENV is readable, $_SERVER is partially readable, CANNOT USE $_GET/$_POST/$_FILES/$_COOKIE/$_REQUEST/$_SESSION/$GLOBALS.

public function form(\Illuminate\Http\Request $request)
{
    $name = $request->input('name');
    $all = $request->all();
    $sessionId = $request->cookie('sessionId');
    $photo = $request->file('photo');
    // Call getContent() to get the raw POST body, instead of file_get_contents('php://input')
    $rawContent = $request->getContent();
    //...
}

Output response

Respond by Illuminate\Http\Response Object, compatible with echo/vardump()/print_r(),CANNOT USE functions dd()/exit()/die()/header()/setcookie()/http_response_code().

public function json()
{
    return response()->json(['time' => time()])->header('header1', 'value1')->withCookie('c1', 'v1');
}

Persistent connection

Singleton connection will be resident in memory, it is recommended to turn on persistent connection for better performance.

Database connection, it will reconnect automatically immediately after disconnect.

// config/database.php
'connections' => [
    'my_conn' => [
        'driver'    => 'mysql',
        'host'      => env('DB_MY_CONN_HOST', 'localhost'),
        'port'      => env('DB_MY_CONN_PORT', 3306),
        'database'  => env('DB_MY_CONN_DATABASE', 'forge'),
        'username'  => env('DB_MY_CONN_USERNAME', 'forge'),
        'password'  => env('DB_MY_CONN_PASSWORD', ''),
        'charset'   => 'utf8mb4',
        'collation' => 'utf8mb4_unicode_ci',
        'prefix'    => '',
        'strict'    => false,
        'options'   => [
            // Enable persistent connection
            \PDO::ATTR_PERSISTENT => true,
        ],
    ],
],

Redis connection, it won't reconnect automatically immediately after disconnect, and will throw an exception about lost connection, reconnect next time. You need to make sure that SELECT DB correctly before operating Redis every time.

// config/database.php
'redis' => [
    'client' => env('REDIS_CLIENT', 'phpredis'), // It is recommended to use phpredis for better performance.
    'default' => [
        'host'       => env('REDIS_HOST', 'localhost'),
        'password'   => env('REDIS_PASSWORD', null),
        'port'       => env('REDIS_PORT', 6379),
        'database'   => 0,
        'persistent' => true, // Enable persistent connection
    ],
],

About memory leaks

Avoid using global variables. If necessary, please clean or reset them manually.

Infinitely appending element into static/global variable will lead to OOM(Out of Memory).

class Test
{
    public static $array = [];
    public static $string = '';
}

// Controller
public function test(Request $req)
{
    // Out of Memory
    Test::$array[] = $req->input('param1');
    Test::$string .= $req->input('param2');
}

Memory leak detection method

Modify config/laravels.php: worker_num=1, max_request=1000000, remember to change it back after test;

Add routing /debug-memory-leak without route middleware to observe the memory changes of the Worker process;

Start LaravelS and request /debug-memory-leak until diff_mem is less than or equal to zero; if diff_mem is always greater than zero, it means that there may be a memory leak in Global Middleware or Laravel Framework;

After completing Step 3, alternately request the business routes and /debug-memory-leak (It is recommended to use ab/wrk to make a large number of requests for business routes), the initial increase in memory is normal. After a large number of requests for the business routes, if diff_mem is always greater than zero and curr_mem continues to increase, there is a high probability of memory leak; If curr_mem always changes within a certain range and does not continue to increase, there is a low probability of memory leak.

If you still can't solve it, max_request is the last guarantee.

Linux kernel parameter adjustment

Linux kernel parameter adjustment

Pressure test

Pressure test

Alternatives

Sponsor

PayPal

BTC

Gitee

License

MIT

Author: hhxsv5
Source Code: https://github.com/hhxsv5/laravel-s
License: MIT License

#php #laravel 

LaravelS: Glue for using Swoole in Laravel Or Lumen

🚀 LaravelS is an out-of-the-box adapter between Swoole and Laravel/Lumen.

Please Watch this repository to get the latest updates.

 _                               _  _____ 
| |                             | |/ ____|
| |     __ _ _ __ __ ___   _____| | (___  
| |    / _` | '__/ _` \ \ / / _ \ |\___ \ 
| |___| (_| | | | (_| |\ V /  __/ |____) |
|______\__,_|_|  \__,_| \_/ \___|_|_____/ 

中文文档

Features

Built-in Http/WebSocket server

Multi-port mixed protocol

Custom process

Memory resident

Asynchronous event listening

Asynchronous task queue

Millisecond cron job

Common Components

Gracefully reload

Automatically reload after modifying code

Support Laravel/Lumen both, good compatibility

Simple & Out of the box

Benchmark

Which is the fastest web framework?

TechEmpower Framework Benchmarks

Requirements

DependencyRequirement
PHP>= 5.5.9 Recommend PHP7+
Swoole>= 1.7.19 No longer support PHP5 since 2.0.12 Recommend 4.5.0+
Laravel/Lumen>= 5.1 Recommend 8.0+

Install

1.Require package via Composer(packagist).

composer require "hhxsv5/laravel-s:~3.7.0" -vvv
# Make sure that your composer.lock file is under the VCS

2.Register service provider(pick one of two).

Laravel: in config/app.php file, Laravel 5.5+ supports package discovery automatically, you should skip this step

'providers' => [
    //...
    Hhxsv5\LaravelS\Illuminate\LaravelSServiceProvider::class,
],

Lumen: in bootstrap/app.php file

$app->register(Hhxsv5\LaravelS\Illuminate\LaravelSServiceProvider::class);

3.Publish configuration and binaries.

After upgrading LaravelS, you need to republish; click here to see the change notes of each version.

php artisan laravels publish
# Configuration: config/laravels.php
# Binary: bin/laravels bin/fswatch bin/inotify

4.Change config/laravels.php: listen_ip, listen_port, refer Settings.

5.Performance tuning

Adjust kernel parameters

Number of Workers: LaravelS uses Swoole's Synchronous IO mode, the larger the worker_num setting, the better the concurrency performance, but it will cause more memory usage and process switching overhead. If one request takes 100ms, in order to provide 1000QPS concurrency, at least 100 Worker processes need to be configured. The calculation method is: worker_num = 1000QPS/(1s/1ms) = 100, so incremental pressure testing is needed to calculate the best worker_num.

Number of Task Workers

Run

Please read the notices carefully before running, Important notices(IMPORTANT).

  • Commands: php bin/laravels {start|stop|restart|reload|info|help}.
CommandDescription
startStart LaravelS, list the processes by "ps -ef|grep laravels"
stopStop LaravelS, and trigger the method onStop of Custom process
restartRestart LaravelS: Stop gracefully before starting; The service is unavailable until startup is complete
reloadReload all Task/Worker/Timer processes which contain your business codes, and trigger the method onReload of Custom process, CANNOT reload Master/Manger processes. After modifying config/laravels.php, you only have to call restart to restart
infoDisplay component version information
helpDisplay help information
  • Boot options for the commands start and restart.
OptionDescription
-d|--daemonizeRun as a daemon, this option will override the swoole.daemonize setting in laravels.php
-e|--envThe environment the command should run under, such as --env=testing will use the configuration file .env.testing firstly, this feature requires Laravel 5.2+
-i|--ignoreIgnore checking PID file of Master process
-x|--x-versionThe version(branch) of the current project, stored in $_ENV/$_SERVER, access via $_ENV['X_VERSION'] $_SERVER['X_VERSION'] $request->server->get('X_VERSION')
  • Runtime files: start will automatically execute php artisan laravels config and generate these files, developers generally don't need to pay attention to them, it's recommended to add them to .gitignore.
FileDescription
storage/laravels.confLaravelS's runtime configuration file
storage/laravels.pidPID file of Master process
storage/laravels-timer-process.pidPID file of the Timer process
storage/laravels-custom-processes.pidPID file of all custom processes

Deploy

It is recommended to supervise the main process through Supervisord, the premise is without option -d and to set swoole.daemonize to false.

[program:laravel-s-test]
directory=/var/www/laravel-s-test
command=/usr/local/bin/php bin/laravels start -i
numprocs=1
autostart=true
autorestart=true
startretries=3
user=www-data
redirect_stderr=true
stdout_logfile=/var/log/supervisor/%(program_name)s.log

Cooperate with Nginx (Recommended)

Demo.

gzip on;
gzip_min_length 1024;
gzip_comp_level 2;
gzip_types text/plain text/css text/javascript application/json application/javascript application/x-javascript application/xml application/x-httpd-php image/jpeg image/gif image/png font/ttf font/otf image/svg+xml;
gzip_vary on;
gzip_disable "msie6";
upstream swoole {
    # Connect IP:Port
    server 127.0.0.1:5200 weight=5 max_fails=3 fail_timeout=30s;
    # Connect UnixSocket Stream file, tips: put the socket file in the /dev/shm directory to get better performance
    #server unix:/yourpath/laravel-s-test/storage/laravels.sock weight=5 max_fails=3 fail_timeout=30s;
    #server 192.168.1.1:5200 weight=3 max_fails=3 fail_timeout=30s;
    #server 192.168.1.2:5200 backup;
    keepalive 16;
}
server {
    listen 80;
    # Don't forget to bind the host
    server_name laravels.com;
    root /yourpath/laravel-s-test/public;
    access_log /yourpath/log/nginx/$server_name.access.log  main;
    autoindex off;
    index index.html index.htm;
    # Nginx handles the static resources(recommend enabling gzip), LaravelS handles the dynamic resource.
    location / {
        try_files $uri @laravels;
    }
    # Response 404 directly when request the PHP file, to avoid exposing public/*.php
    #location ~* \.php$ {
    #    return 404;
    #}
    location @laravels {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout 120s;
        proxy_http_version 1.1;
        proxy_set_header Connection "";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        # "swoole" is the upstream
        proxy_pass http://swoole;
    }
}

Cooperate with Apache

LoadModule proxy_module /yourpath/modules/mod_proxy.so
LoadModule proxy_balancer_module /yourpath/modules/mod_proxy_balancer.so
LoadModule lbmethod_byrequests_module /yourpath/modules/mod_lbmethod_byrequests.so
LoadModule proxy_http_module /yourpath/modules/mod_proxy_http.so
LoadModule slotmem_shm_module /yourpath/modules/mod_slotmem_shm.so
LoadModule rewrite_module /yourpath/modules/mod_rewrite.so
LoadModule remoteip_module /yourpath/modules/mod_remoteip.so
LoadModule deflate_module /yourpath/modules/mod_deflate.so

<IfModule deflate_module>
    SetOutputFilter DEFLATE
    DeflateCompressionLevel 2
    AddOutputFilterByType DEFLATE text/html text/plain text/css text/javascript application/json application/javascript application/x-javascript application/xml application/x-httpd-php image/jpeg image/gif image/png font/ttf font/otf image/svg+xml
</IfModule>

<VirtualHost *:80>
    # Don't forget to bind the host
    ServerName www.laravels.com
    ServerAdmin hhxsv5@sina.com

    DocumentRoot /yourpath/laravel-s-test/public;
    DirectoryIndex index.html index.htm
    <Directory "/">
        AllowOverride None
        Require all granted
    </Directory>

    RemoteIPHeader X-Forwarded-For

    ProxyRequests Off
    ProxyPreserveHost On
    <Proxy balancer://laravels>  
        BalancerMember http://192.168.1.1:5200 loadfactor=7
        #BalancerMember http://192.168.1.2:5200 loadfactor=3
        #BalancerMember http://192.168.1.3:5200 loadfactor=1 status=+H
        ProxySet lbmethod=byrequests
    </Proxy>
    #ProxyPass / balancer://laravels/
    #ProxyPassReverse / balancer://laravels/

    # Apache handles the static resources, LaravelS handles the dynamic resource.
    RewriteEngine On
    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} !-d
    RewriteCond %{DOCUMENT_ROOT}%{REQUEST_FILENAME} !-f
    RewriteRule ^/(.*)$ balancer://laravels%{REQUEST_URI} [P,L]

    ErrorLog ${APACHE_LOG_DIR}/www.laravels.com.error.log
    CustomLog ${APACHE_LOG_DIR}/www.laravels.com.access.log combined
</VirtualHost>

Enable WebSocket server

The Listening address of WebSocket Sever is the same as Http Server.

1.Create WebSocket Handler class, and implement interface WebSocketHandlerInterface.The instant is automatically instantiated when start, you do not need to manually create it.

namespace App\Services;
use Hhxsv5\LaravelS\Swoole\WebSocketHandlerInterface;
use Swoole\Http\Request;
use Swoole\Http\Response;
use Swoole\WebSocket\Frame;
use Swoole\WebSocket\Server;
/**
 * @see https://www.swoole.co.uk/docs/modules/swoole-websocket-server
 */
class WebSocketService implements WebSocketHandlerInterface
{
    // Declare constructor without parameters
    public function __construct()
    {
    }
    // public function onHandShake(Request $request, Response $response)
    // {
           // Custom handshake: https://www.swoole.co.uk/docs/modules/swoole-websocket-server-on-handshake
           // The onOpen event will be triggered automatically after a successful handshake
    // }
    public function onOpen(Server $server, Request $request)
    {
        // Before the onOpen event is triggered, the HTTP request to establish the WebSocket has passed the Laravel route,
        // so Laravel's Request, Auth information are readable, Session is readable and writable, but only in the onOpen event.
        // \Log::info('New WebSocket connection', [$request->fd, request()->all(), session()->getId(), session('xxx'), session(['yyy' => time()])]);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $server->push($request->fd, 'Welcome to LaravelS');
    }
    public function onMessage(Server $server, Frame $frame)
    {
        // \Log::info('Received message', [$frame->fd, $frame->data, $frame->opcode, $frame->finish]);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $server->push($frame->fd, date('Y-m-d H:i:s'));
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

2.Modify config/laravels.php.

// ...
'websocket'      => [
    'enable'  => true, // Note: set enable to true
    'handler' => \App\Services\WebSocketService::class,
],
'swoole'         => [
    //...
    // Must set dispatch_mode in (2, 4, 5), see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
    'dispatch_mode' => 2,
    //...
],
// ...

3.Use SwooleTable to bind FD & UserId, optional, Swoole Table Demo. Also you can use the other global storage services, like Redis/Memcached/MySQL, but be careful that FD will be possible conflicting between multiple Swoole Servers.

4.Cooperate with Nginx (Recommended)

Refer WebSocket Proxy

map $http_upgrade $connection_upgrade {
    default upgrade;
    ''      close;
}
upstream swoole {
    # Connect IP:Port
    server 127.0.0.1:5200 weight=5 max_fails=3 fail_timeout=30s;
    # Connect UnixSocket Stream file, tips: put the socket file in the /dev/shm directory to get better performance
    #server unix:/yourpath/laravel-s-test/storage/laravels.sock weight=5 max_fails=3 fail_timeout=30s;
    #server 192.168.1.1:5200 weight=3 max_fails=3 fail_timeout=30s;
    #server 192.168.1.2:5200 backup;
    keepalive 16;
}
server {
    listen 80;
    # Don't forget to bind the host
    server_name laravels.com;
    root /yourpath/laravel-s-test/public;
    access_log /yourpath/log/nginx/$server_name.access.log  main;
    autoindex off;
    index index.html index.htm;
    # Nginx handles the static resources(recommend enabling gzip), LaravelS handles the dynamic resource.
    location / {
        try_files $uri @laravels;
    }
    # Response 404 directly when request the PHP file, to avoid exposing public/*.php
    #location ~* \.php$ {
    #    return 404;
    #}
    # Http and WebSocket are concomitant, Nginx identifies them by "location"
    # !!! The location of WebSocket is "/ws"
    # Javascript: var ws = new WebSocket("ws://laravels.com/ws");
    location =/ws {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout: Nginx will close the connection if the proxied server does not send data to Nginx in 60 seconds; At the same time, this close behavior is also affected by heartbeat setting of Swoole.
        # proxy_read_timeout 60s;
        proxy_http_version 1.1;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection $connection_upgrade;
        proxy_pass http://swoole;
    }
    location @laravels {
        # proxy_connect_timeout 60s;
        # proxy_send_timeout 60s;
        # proxy_read_timeout 60s;
        proxy_http_version 1.1;
        proxy_set_header Connection "";
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_pass http://swoole;
    }
}

5.Heartbeat setting

Heartbeat setting of Swoole

// config/laravels.php
'swoole' => [
    //...
    // All connections are traversed every 60 seconds. If a connection does not send any data to the server within 600 seconds, the connection will be forced to close.
    'heartbeat_idle_time'      => 600,
    'heartbeat_check_interval' => 60,
    //...
],

Proxy read timeout of Nginx

# Nginx will close the connection if the proxied server does not send data to Nginx in 60 seconds
proxy_read_timeout 60s;

6.Push data in controller

namespace App\Http\Controllers;
class TestController extends Controller
{
    public function push()
    {
        $fd = 1; // Find fd by userId from a map [userId=>fd].
        /**@var \Swoole\WebSocket\Server $swoole */
        $swoole = app('swoole');
        $success = $swoole->push($fd, 'Push data to fd#1 in Controller');
        var_dump($success);
    }
}

Listen events

System events

Usually, you can reset/destroy some global/static variables, or change the current Request/Response object.

laravels.received_request After LaravelS parsed Swoole\Http\Request to Illuminate\Http\Request, before Laravel's Kernel handles this request.

// Edit file `app/Providers/EventServiceProvider.php`, add the following code into method `boot`
// If no variable $events, you can also call Facade \Event::listen(). 
$events->listen('laravels.received_request', function (\Illuminate\Http\Request $req, $app) {
    $req->query->set('get_key', 'hhxsv5');// Change query of request
    $req->request->set('post_key', 'hhxsv5'); // Change post of request
});

laravels.generated_response After Laravel's Kernel handled the request, before LaravelS parses Illuminate\Http\Response to Swoole\Http\Response.

// Edit file `app/Providers/EventServiceProvider.php`, add the following code into method `boot`
// If no variable $events, you can also call Facade \Event::listen(). 
$events->listen('laravels.generated_response', function (\Illuminate\Http\Request $req, \Symfony\Component\HttpFoundation\Response $rsp, $app) {
    $rsp->headers->set('header-key', 'hhxsv5');// Change header of response
});

Customized asynchronous events

This feature depends on AsyncTask of Swoole, your need to set swoole.task_worker_num in config/laravels.php firstly. The performance of asynchronous event processing is influenced by number of Swoole task process, you need to set task_worker_num appropriately.

1.Create event class.

use Hhxsv5\LaravelS\Swoole\Task\Event;
class TestEvent extends Event
{
    protected $listeners = [
        // Listener list
        TestListener1::class,
        // TestListener2::class,
    ];
    private $data;
    public function __construct($data)
    {
        $this->data = $data;
    }
    public function getData()
    {
        return $this->data;
    }
}

2.Create listener class.

use Hhxsv5\LaravelS\Swoole\Task\Task;
use Hhxsv5\LaravelS\Swoole\Task\Listener;
class TestListener1 extends Listener
{
    /**
     * @var TestEvent
     */
    protected $event;
    
    public function handle()
    {
        \Log::info(__CLASS__ . ':handle start', [$this->event->getData()]);
        sleep(2);// Simulate the slow codes
        // Deliver task in CronJob, but NOT support callback finish() of task.
        // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
        $ret = Task::deliver(new TestTask('task data'));
        var_dump($ret);
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

3.Fire event.

// Create instance of event and fire it, "fire" is asynchronous.
use Hhxsv5\LaravelS\Swoole\Task\Event;
$event = new TestEvent('event data');
// $event->delay(10); // Delay 10 seconds to fire event
// $event->setTries(3); // When an error occurs, try 3 times in total
$success = Event::fire($event);
var_dump($success);// Return true if sucess, otherwise false

Asynchronous task queue

This feature depends on AsyncTask of Swoole, your need to set swoole.task_worker_num in config/laravels.php firstly. The performance of task processing is influenced by number of Swoole task process, you need to set task_worker_num appropriately.

1.Create task class.

use Hhxsv5\LaravelS\Swoole\Task\Task;
class TestTask extends Task
{
    private $data;
    private $result;
    public function __construct($data)
    {
        $this->data = $data;
    }
    // The logic of task handling, run in task process, CAN NOT deliver task
    public function handle()
    {
        \Log::info(__CLASS__ . ':handle start', [$this->data]);
        sleep(2);// Simulate the slow codes
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
        $this->result = 'the result of ' . $this->data;
    }
    // Optional, finish event, the logic of after task handling, run in worker process, CAN deliver task 
    public function finish()
    {
        \Log::info(__CLASS__ . ':finish start', [$this->result]);
        Task::deliver(new TestTask2('task2 data')); // Deliver the other task
    }
}

2.Deliver task.

// Create instance of TestTask and deliver it, "deliver" is asynchronous.
use Hhxsv5\LaravelS\Swoole\Task\Task;
$task = new TestTask('task data');
// $task->delay(3);// delay 3 seconds to deliver task
// $task->setTries(3); // When an error occurs, try 3 times in total
$ret = Task::deliver($task);
var_dump($ret);// Return true if sucess, otherwise false

Millisecond cron job

Wrapper cron job base on Swoole's Millisecond Timer, replace Linux Crontab.

1.Create cron job class.

namespace App\Jobs\Timer;
use App\Tasks\TestTask;
use Swoole\Coroutine;
use Hhxsv5\LaravelS\Swoole\Task\Task;
use Hhxsv5\LaravelS\Swoole\Timer\CronJob;
class TestCronJob extends CronJob
{
    protected $i = 0;
    // !!! The `interval` and `isImmediate` of cron job can be configured in two ways(pick one of two): one is to overload the corresponding method, and the other is to pass parameters when registering cron job.
    // --- Override the corresponding method to return the configuration: begin
    public function interval()
    {
        return 1000;// Run every 1000ms
    }
    public function isImmediate()
    {
        return false;// Whether to trigger `run` immediately after setting up
    }
    // --- Override the corresponding method to return the configuration: end
    public function run()
    {
        \Log::info(__METHOD__, ['start', $this->i, microtime(true)]);
        // do something
        // sleep(1); // Swoole < 2.1
        Coroutine::sleep(1); // Swoole>=2.1 Coroutine will be automatically created for run().
        $this->i++;
        \Log::info(__METHOD__, ['end', $this->i, microtime(true)]);

        if ($this->i >= 10) { // Run 10 times only
            \Log::info(__METHOD__, ['stop', $this->i, microtime(true)]);
            $this->stop(); // Stop this cron job, but it will run again after restart/reload.
            // Deliver task in CronJob, but NOT support callback finish() of task.
            // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
            $ret = Task::deliver(new TestTask('task data'));
            var_dump($ret);
        }
        // The exceptions thrown here will be caught by the upper layer and recorded in the Swoole log. Developers need to try/catch manually.
    }
}

2.Register cron job.

// Register cron jobs in file "config/laravels.php"
[
    // ...
    'timer'          => [
        'enable' => true, // Enable Timer
        'jobs'   => [ // The list of cron job
            // Enable LaravelScheduleJob to run `php artisan schedule:run` every 1 minute, replace Linux Crontab
            // \Hhxsv5\LaravelS\Illuminate\LaravelScheduleJob::class,
            // Two ways to configure parameters:
            // [\App\Jobs\Timer\TestCronJob::class, [1000, true]], // Pass in parameters when registering
            \App\Jobs\Timer\TestCronJob::class, // Override the corresponding method to return the configuration
        ],
        'max_wait_time' => 5, // Max waiting time of reloading
        // Enable the global lock to ensure that only one instance starts the timer when deploying multiple instances. This feature depends on Redis, please see https://laravel.com/docs/7.x/redis
        'global_lock'     => false,
        'global_lock_key' => config('app.name', 'Laravel'),
    ],
    // ...
];

3.Note: it will launch multiple timers when build the server cluster, so you need to make sure that launch one timer only to avoid running repetitive task.

4.LaravelS v3.4.0 starts to support the hot restart [Reload] Timer process. After LaravelS receives the SIGUSR1 signal, it waits for max_wait_time(default 5) seconds to end the process, then the Manager process will pull up the Timer process again.

5.If you only need to use minute-level scheduled tasks, it is recommended to enable Hhxsv5\LaravelS\Illuminate\LaravelScheduleJob instead of Linux Crontab, so that you can follow the coding habits of Laravel task scheduling and configure Kernel.

// app/Console/Kernel.php
protected function schedule(Schedule $schedule)
{
    // runInBackground() will start a new child process to execute the task. This is asynchronous and will not affect the execution timing of other tasks.
    $schedule->command(TestCommand::class)->runInBackground()->everyMinute();
}

Automatically reload after modifying code

Via inotify, support Linux only.

1.Install inotify extension.

2.Turn on the switch in Settings.

3.Notice: Modify the file only in Linux to receive the file change events. It's recommended to use the latest Docker. Vagrant Solution.

Via fswatch, support OS X/Linux/Windows.

1.Install fswatch.

2.Run command in your project root directory.

# Watch current directory
./bin/fswatch
# Watch app directory
./bin/fswatch ./app

Via inotifywait, support Linux.

1.Install inotify-tools.

2.Run command in your project root directory.

# Watch current directory
./bin/inotify
# Watch app directory
./bin/inotify ./app

When the above methods does not work, the ultimate solution: set max_request=1,worker_num=1, so that Worker process will restart after processing a request. The performance of this method is very poor, so only development environment use.

Get the instance of SwooleServer in your project

/**
 * $swoole is the instance of `Swoole\WebSocket\Server` if enable WebSocket server, otherwise `Swoole\Http\Server`
 * @var \Swoole\WebSocket\Server|\Swoole\Http\Server $swoole
 */
$swoole = app('swoole');
var_dump($swoole->stats());
$swoole->push($fd, 'Push WebSocket message');

Use SwooleTable

1.Define Table, support multiple.

All defined tables will be created before Swoole starting.

// in file "config/laravels.php"
[
    // ...
    'swoole_tables'  => [
        // Scene:bind UserId & FD in WebSocket
        'ws' => [// The Key is table name, will add suffix "Table" to avoid naming conflicts. Here defined a table named "wsTable"
            'size'   => 102400,// The max size
            'column' => [// Define the columns
                ['name' => 'value', 'type' => \Swoole\Table::TYPE_INT, 'size' => 8],
            ],
        ],
        //...Define the other tables
    ],
    // ...
];

2.Access Table: all table instances will be bound on SwooleServer, access by app('swoole')->xxxTable.

namespace App\Services;
use Hhxsv5\LaravelS\Swoole\WebSocketHandlerInterface;
use Swoole\Http\Request;
use Swoole\WebSocket\Frame;
use Swoole\WebSocket\Server;
class WebSocketService implements WebSocketHandlerInterface
{
    /**@var \Swoole\Table $wsTable */
    private $wsTable;
    public function __construct()
    {
        $this->wsTable = app('swoole')->wsTable;
    }
    // Scene:bind UserId & FD in WebSocket
    public function onOpen(Server $server, Request $request)
    {
        // var_dump(app('swoole') === $server);// The same instance
        /**
         * Get the currently logged in user
         * This feature requires that the path to establish a WebSocket connection go through middleware such as Authenticate.
         * E.g:
         * Browser side: var ws = new WebSocket("ws://127.0.0.1:5200/ws");
         * Then the /ws route in Laravel needs to add the middleware like Authenticate.
         * Route::get('/ws', function () {
         *     // Respond any content with status code 200
         *     return 'websocket';
         * })->middleware(['auth']);
         */
        // $user = Auth::user();
        // $userId = $user ? $user->id : 0; // 0 means a guest user who is not logged in
        $userId = mt_rand(1000, 10000);
        // if (!$userId) {
        //     // Disconnect the connections of unlogged users
        //     $server->disconnect($request->fd);
        //     return;
        // }
        $this->wsTable->set('uid:' . $userId, ['value' => $request->fd]);// Bind map uid to fd
        $this->wsTable->set('fd:' . $request->fd, ['value' => $userId]);// Bind map fd to uid
        $server->push($request->fd, "Welcome to LaravelS #{$request->fd}");
    }
    public function onMessage(Server $server, Frame $frame)
    {
        // Broadcast
        foreach ($this->wsTable as $key => $row) {
            if (strpos($key, 'uid:') === 0 && $server->isEstablished($row['value'])) {
                $content = sprintf('Broadcast: new message "%s" from #%d', $frame->data, $frame->fd);
                $server->push($row['value'], $content);
            }
        }
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        $uid = $this->wsTable->get('fd:' . $fd);
        if ($uid !== false) {
            $this->wsTable->del('uid:' . $uid['value']); // Unbind uid map
        }
        $this->wsTable->del('fd:' . $fd);// Unbind fd map
        $server->push($fd, "Goodbye #{$fd}");
    }
}

Multi-port mixed protocol

For more information, please refer to Swoole Server AddListener

To make our main server support more protocols not just Http and WebSocket, we bring the feature multi-port mixed protocol of Swoole in LaravelS and name it Socket. Now, you can build TCP/UDP applications easily on top of Laravel.

Create Socket handler class, and extend Hhxsv5\LaravelS\Swoole\Socket\{TcpSocket|UdpSocket|Http|WebSocket}.

namespace App\Sockets;
use Hhxsv5\LaravelS\Swoole\Socket\TcpSocket;
use Swoole\Server;
class TestTcpSocket extends TcpSocket
{
    public function onConnect(Server $server, $fd, $reactorId)
    {
        \Log::info('New TCP connection', [$fd]);
        $server->send($fd, 'Welcome to LaravelS.');
    }
    public function onReceive(Server $server, $fd, $reactorId, $data)
    {
        \Log::info('Received data', [$fd, $data]);
        $server->send($fd, 'LaravelS: ' . $data);
        if ($data === "quit\r\n") {
            $server->send($fd, 'LaravelS: bye' . PHP_EOL);
            $server->close($fd);
        }
    }
    public function onClose(Server $server, $fd, $reactorId)
    {
        \Log::info('Close TCP connection', [$fd]);
        $server->send($fd, 'Goodbye');
    }
}

These Socket connections share the same worker processes with your HTTP/WebSocket connections. So it won't be a problem at all if you want to deliver tasks, use SwooleTable, even Laravel components such as DB, Eloquent and so on. At the same time, you can access Swoole\Server\Port object directly by member property swoolePort.

public function onReceive(Server $server, $fd, $reactorId, $data)
{
    $port = $this->swoolePort; // Get the `Swoole\Server\Port` object
}
namespace App\Http\Controllers;
class TestController extends Controller
{
    public function test()
    {
        /**@var \Swoole\Http\Server|\Swoole\WebSocket\Server $swoole */
        $swoole = app('swoole');
        // $swoole->ports: Traverse all Port objects, https://www.swoole.co.uk/docs/modules/swoole-server/multiple-ports
        $port = $swoole->ports[0]; // Get the `Swoole\Server\Port` object, $port[0] is the port of the main server
        foreach ($port->connections as $fd) { // Traverse all connections
            // $swoole->send($fd, 'Send tcp message');
            // if($swoole->isEstablished($fd)) {
            //     $swoole->push($fd, 'Send websocket message');
            // }
        }
    }
}

Register Sockets.

// Edit `config/laravels.php`
//...
'sockets' => [
    [
        'host'     => '127.0.0.1',
        'port'     => 5291,
        'type'     => SWOOLE_SOCK_TCP,// Socket type: SWOOLE_SOCK_TCP/SWOOLE_SOCK_TCP6/SWOOLE_SOCK_UDP/SWOOLE_SOCK_UDP6/SWOOLE_UNIX_DGRAM/SWOOLE_UNIX_STREAM
        'settings' => [// Swoole settings:https://www.swoole.co.uk/docs/modules/swoole-server-methods#swoole_server-addlistener
            'open_eof_check' => true,
            'package_eof'    => "\r\n",
        ],
        'handler'  => \App\Sockets\TestTcpSocket::class,
        'enable'   => true, // whether to enable, default true
    ],
],

About the heartbeat configuration, it can only be set on the main server and cannot be configured on Socket, but the Socket inherits the heartbeat configuration of the main server.

For TCP socket, onConnect and onClose events will be blocked when dispatch_mode of Swoole is 1/3, so if you want to unblock these two events please set dispatch_mode to 2/4/5.

'swoole' => [
    //...
    'dispatch_mode' => 2,
    //...
];

Test.

TCP: telnet 127.0.0.1 5291

UDP: [Linux] echo "Hello LaravelS" > /dev/udp/127.0.0.1/5292

Register example of other protocols.

  • UDP
  • Http
  • WebSocket: The main server must turn on WebSocket, that is, set websocket.enable to true.

Coroutine

Swoole Coroutine

Warning: The order of code execution in the coroutine is out of order. The data of the request level should be isolated by the coroutine ID. However, there are many singleton and static attributes in Laravel/Lumen, the data between different requests will affect each other, it's Unsafe. For example, the database connection is a singleton, the same database connection shares the same PDO resource. This is fine in the synchronous blocking mode, but it does not work in the asynchronous coroutine mode. Each query needs to create different connections and maintain IO state of different connections, which requires a connection pool.

DO NOT enable the coroutine, only the custom process can use the coroutine.

Custom process

Support developers to create special work processes for monitoring, reporting, or other special tasks. Refer addProcess.

Create Proccess class, implements CustomProcessInterface.

namespace App\Processes;
use App\Tasks\TestTask;
use Hhxsv5\LaravelS\Swoole\Process\CustomProcessInterface;
use Hhxsv5\LaravelS\Swoole\Task\Task;
use Swoole\Coroutine;
use Swoole\Http\Server;
use Swoole\Process;
class TestProcess implements CustomProcessInterface
{
    /**
     * @var bool Quit tag for Reload updates
     */
    private static $quit = false;

    public static function callback(Server $swoole, Process $process)
    {
        // The callback method cannot exit. Once exited, Manager process will automatically create the process 
        while (!self::$quit) {
            \Log::info('Test process: running');
            // sleep(1); // Swoole < 2.1
            Coroutine::sleep(1); // Swoole>=2.1: Coroutine & Runtime will be automatically enabled for callback().
             // Deliver task in custom process, but NOT support callback finish() of task.
            // Note: Modify task_ipc_mode to 1 or 2 in config/laravels.php, see https://www.swoole.co.uk/docs/modules/swoole-server/configuration
            $ret = Task::deliver(new TestTask('task data'));
            var_dump($ret);
            // The upper layer will catch the exception thrown in the callback and record it in the Swoole log, and then this process will exit. The Manager process will re-create the process after 3 seconds, so developers need to try/catch to catch the exception by themselves to avoid frequent process creation.
            // throw new \Exception('an exception');
        }
    }
    // Requirements: LaravelS >= v3.4.0 & callback() must be async non-blocking program.
    public static function onReload(Server $swoole, Process $process)
    {
        // Stop the process...
        // Then end process
        \Log::info('Test process: reloading');
        self::$quit = true;
        // $process->exit(0); // Force exit process
    }
    // Requirements: LaravelS >= v3.7.4 & callback() must be async non-blocking program.
    public static function onStop(Server $swoole, Process $process)
    {
        // Stop the process...
        // Then end process
        \Log::info('Test process: stopping');
        self::$quit = true;
        // $process->exit(0); // Force exit process
    }
}

Register TestProcess.

// Edit `config/laravels.php`
// ...
'processes' => [
    'test' => [ // Key name is process name
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false, // Whether redirect stdin/stdout, true or false
        'pipe'     => 0,     // The type of pipeline, 0: no pipeline 1: SOCK_STREAM 2: SOCK_DGRAM
        'enable'   => true,  // Whether to enable, default true
        //'num'    => 3   // To create multiple processes of this class, default is 1
        //'queue'    => [ // Enable message queue as inter-process communication, configure empty array means use default parameters
        //    'msg_key'  => 0,    // The key of the message queue. Default: ftok(__FILE__, 1).
        //    'mode'     => 2,    // Communication mode, default is 2, which means contention mode
        //    'capacity' => 8192, // The length of a single message, is limited by the operating system kernel parameters. The default is 8192, and the maximum is 65536
        //],
        //'restart_interval' => 5, // After the process exits abnormally, how many seconds to wait before restarting the process, default 5 seconds
    ],
],

Note: The callback() cannot quit. If quit, the Manager process will re-create the process.

Example: Write data to a custom process.

// config/laravels.php
'processes' => [
    'test' => [
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false,
        'pipe'     => 1,
    ],
],
// app/Processes/TestProcess.php
public static function callback(Server $swoole, Process $process)
{
    while ($data = $process->read()) {
        \Log::info('TestProcess: read data', [$data]);
        $process->write('TestProcess: ' . $data);
    }
}
// app/Http/Controllers/TestController.php
public function testProcessWrite()
{
    /**@var \Swoole\Process $process */
    $process = app('swoole')->customProcesses['test'];
    $process->write('TestController: write data' . time());
    var_dump($process->read());
}

Common components

Apollo

LaravelS will pull the Apollo configuration and write it to the .env file when starting. At the same time, LaravelS will start the custom process apollo to monitor the configuration and automatically reload when the configuration changes.

Enable Apollo: add --enable-apollo and Apollo parameters to the startup parameters.

php bin/laravels start --enable-apollo --apollo-server=http://127.0.0.1:8080 --apollo-app-id=LARAVEL-S-TEST

Support hot updates(optional).

// Edit `config/laravels.php`
'processes' => Hhxsv5\LaravelS\Components\Apollo\Process::getDefinition(),
// When there are other custom process configurations
'processes' => [
    'test' => [
        'class'    => \App\Processes\TestProcess::class,
        'redirect' => false,
        'pipe'     => 1,
    ],
    // ...
] + Hhxsv5\LaravelS\Components\Apollo\Process::getDefinition(),

List of available parameters.

ParameterDescriptionDefaultDemo
apollo-serverApollo server URL---apollo-server=http://127.0.0.1:8080
apollo-app-idApollo APP ID---apollo-app-id=LARAVEL-S-TEST
apollo-namespacesThe namespace to which the APP belongs, support specify the multipleapplication--apollo-namespaces=application --apollo-namespaces=env
apollo-clusterThe cluster to which the APP belongsdefault--apollo-cluster=default
apollo-client-ipIP of current instance, can also be used for grayscale publishingLocal intranet IP--apollo-client-ip=10.2.1.83
apollo-pull-timeoutTimeout time(seconds) when pulling configuration5--apollo-pull-timeout=5
apollo-backup-old-envWhether to backup the old configuration file when updating the configuration file .envfalse--apollo-backup-old-env

Prometheus

Support Prometheus monitoring and alarm, Grafana visually view monitoring metrics. Please refer to Docker Compose for the environment construction of Prometheus and Grafana.

Require extension APCu >= 5.0.0, please install it by pecl install apcu.

Copy the configuration file prometheus.php to the config directory of your project. Modify the configuration as appropriate.

# Execute commands in the project root directory
cp vendor/hhxsv5/laravel-s/config/prometheus.php config/

If your project is Lumen, you also need to manually load the configuration $app->configure('prometheus'); in bootstrap/app.php.

Configure global middleware: Hhxsv5\LaravelS\Components\Prometheus\RequestMiddleware::class. In order to count the request time consumption as accurately as possible, RequestMiddleware must be the first global middleware, which needs to be placed in front of other middleware.

Register ServiceProvider: Hhxsv5\LaravelS\Components\Prometheus\ServiceProvider::class.

Configure the CollectorProcess in config/laravels.php to collect the metrics of Swoole Worker/Task/Timer processes regularly.

'processes' => Hhxsv5\LaravelS\Components\Prometheus\CollectorProcess::getDefinition(),

Create the route to output metrics.

use Hhxsv5\LaravelS\Components\Prometheus\Exporter;

Route::get('/actuator/prometheus', function () {
    $result = app(Exporter::class)->render();
    return response($result, 200, ['Content-Type' => Exporter::REDNER_MIME_TYPE]);
});

Complete the configuration of Prometheus and start it.

global:
  scrape_interval: 5s
  scrape_timeout: 5s
  evaluation_interval: 30s
scrape_configs:
- job_name: laravel-s-test
  honor_timestamps: true
  metrics_path: /actuator/prometheus
  scheme: http
  follow_redirects: true
  static_configs:
  - targets:
    - 127.0.0.1:5200 # The ip and port of the monitored service
# Dynamically discovered using one of the supported service-discovery mechanisms
# https://prometheus.io/docs/prometheus/latest/configuration/configuration/#scrape_config
# - job_name: laravels-eureka
#   honor_timestamps: true
#   scrape_interval: 5s
#   metrics_path: /actuator/prometheus
#   scheme: http
#   follow_redirects: true
  # eureka_sd_configs:
  # - server: http://127.0.0.1:8080/eureka
  #   follow_redirects: true
  #   refresh_interval: 5s

Start Grafana, then import panel json.

Grafana Dashboard

Other features

Configure Swoole events

Supported events:

EventInterfaceWhen happened
ServerStartHhxsv5\LaravelS\Swoole\Events\ServerStartInterfaceOccurs when the Master process is starting, this event should not handle complex business logic, and can only do some simple work of initialization.
ServerStopHhxsv5\LaravelS\Swoole\Events\ServerStopInterfaceOccurs when the server exits normally, CANNOT use async or coroutine related APIs in this event.
WorkerStartHhxsv5\LaravelS\Swoole\Events\WorkerStartInterfaceOccurs after the Worker/Task process is started, and the Laravel initialization has been completed.
WorkerStopHhxsv5\LaravelS\Swoole\Events\WorkerStopInterfaceOccurs after the Worker/Task process exits normally
WorkerErrorHhxsv5\LaravelS\Swoole\Events\WorkerErrorInterfaceOccurs when an exception or fatal error occurs in the Worker/Task process

1.Create an event class to implement the corresponding interface.

namespace App\Events;
use Hhxsv5\LaravelS\Swoole\Events\ServerStartInterface;
use Swoole\Atomic;
use Swoole\Http\Server;
class ServerStartEvent implements ServerStartInterface
{
    public function __construct()
    {
    }
    public function handle(Server $server)
    {
        // Initialize a global counter (available across processes)
        $server->atomicCount = new Atomic(2233);

        // Invoked in controller: app('swoole')->atomicCount->get();
    }
}
namespace App\Events;
use Hhxsv5\LaravelS\Swoole\Events\WorkerStartInterface;
use Swoole\Http\Server;
class WorkerStartEvent implements WorkerStartInterface
{
    public function __construct()
    {
    }
    public function handle(Server $server, $workerId)
    {
        // Initialize a database connection pool
        // DatabaseConnectionPool::init();
    }
}

2.Configuration.

// Edit `config/laravels.php`
'event_handlers' => [
    'ServerStart' => [\App\Events\ServerStartEvent::class], // Trigger events in array order
    'WorkerStart' => [\App\Events\WorkerStartEvent::class],
],

Serverless

Alibaba Cloud Function Compute

Function Compute.

1.Modify bootstrap/app.php and set the storage directory. Because the project directory is read-only, the /tmp directory can only be read and written.

$app->useStoragePath(env('APP_STORAGE_PATH', '/tmp/storage'));

2.Create a shell script laravels_bootstrap and grant executable permission.

#!/usr/bin/env bash
set +e

# Create storage-related directories
mkdir -p /tmp/storage/app/public
mkdir -p /tmp/storage/framework/cache
mkdir -p /tmp/storage/framework/sessions
mkdir -p /tmp/storage/framework/testing
mkdir -p /tmp/storage/framework/views
mkdir -p /tmp/storage/logs

# Set the environment variable APP_STORAGE_PATH, please make sure it's the same as APP_STORAGE_PATH in .env
export APP_STORAGE_PATH=/tmp/storage

# Start LaravelS
php bin/laravels start

3.Configure template.xml.

ROSTemplateFormatVersion: '2015-09-01'
Transform: 'Aliyun::Serverless-2018-04-03'
Resources:
  laravel-s-demo:
    Type: 'Aliyun::Serverless::Service'
    Properties:
      Description: 'LaravelS Demo for Serverless'
    fc-laravel-s:
      Type: 'Aliyun::Serverless::Function'
      Properties:
        Handler: laravels.handler
        Runtime: custom
        MemorySize: 512
        Timeout: 30
        CodeUri: ./
        InstanceConcurrency: 10
        EnvironmentVariables:
          BOOTSTRAP_FILE: laravels_bootstrap

Important notices

Singleton Issue

Under FPM mode, singleton instances will be instantiated and recycled in every request, request start=>instantiate instance=>request end=>recycled instance.

Under Swoole Server, All singleton instances will be held in memory, different lifetime from FPM, request start=>instantiate instance=>request end=>do not recycle singleton instance. So need developer to maintain status of singleton instances in every request.

Common solutions:

Write a XxxCleaner class to clean up the singleton object state. This class implements the interface Hhxsv5\LaravelS\Illuminate\Cleaners\CleanerInterface and then registers it in cleaners of laravels.php.

Reset status of singleton instances by Middleware.

Re-register ServiceProvider, add XxxServiceProvider into register_providers of file laravels.php. So that reinitialize singleton instances in every request Refer.

Cleaners

Configuration cleaners.

Known issues

Known issues: a package of known issues and solutions.

Debugging method

Logging; if you want to output to the console, you can use stderr, Log::channel('stderr')->debug('debug message').

Laravel Dump Server(Laravel 5.7 has been integrated by default).

Read request

Read request by Illuminate\Http\Request Object, $_ENV is readable, $_SERVER is partially readable, CANNOT USE $_GET/$_POST/$_FILES/$_COOKIE/$_REQUEST/$_SESSION/$GLOBALS.

public function form(\Illuminate\Http\Request $request)
{
    $name = $request->input('name');
    $all = $request->all();
    $sessionId = $request->cookie('sessionId');
    $photo = $request->file('photo');
    // Call getContent() to get the raw POST body, instead of file_get_contents('php://input')
    $rawContent = $request->getContent();
    //...
}

Output response

Respond by Illuminate\Http\Response Object, compatible with echo/vardump()/print_r(),CANNOT USE functions dd()/exit()/die()/header()/setcookie()/http_response_code().

public function json()
{
    return response()->json(['time' => time()])->header('header1', 'value1')->withCookie('c1', 'v1');
}

Persistent connection

Singleton connection will be resident in memory, it is recommended to turn on persistent connection for better performance.

  1. Database connection, it will reconnect automatically immediately after disconnect.
// config/database.php
'connections' => [
    'my_conn' => [
        'driver'    => 'mysql',
        'host'      => env('DB_MY_CONN_HOST', 'localhost'),
        'port'      => env('DB_MY_CONN_PORT', 3306),
        'database'  => env('DB_MY_CONN_DATABASE', 'forge'),
        'username'  => env('DB_MY_CONN_USERNAME', 'forge'),
        'password'  => env('DB_MY_CONN_PASSWORD', ''),
        'charset'   => 'utf8mb4',
        'collation' => 'utf8mb4_unicode_ci',
        'prefix'    => '',
        'strict'    => false,
        'options'   => [
            // Enable persistent connection
            \PDO::ATTR_PERSISTENT => true,
        ],
    ],
],
  1. Redis connection, it won't reconnect automatically immediately after disconnect, and will throw an exception about lost connection, reconnect next time. You need to make sure that SELECT DB correctly before operating Redis every time.
// config/database.php
'redis' => [
    'client' => env('REDIS_CLIENT', 'phpredis'), // It is recommended to use phpredis for better performance.
    'default' => [
        'host'       => env('REDIS_HOST', 'localhost'),
        'password'   => env('REDIS_PASSWORD', null),
        'port'       => env('REDIS_PORT', 6379),
        'database'   => 0,
        'persistent' => true, // Enable persistent connection
    ],
],

About memory leaks

Avoid using global variables. If necessary, please clean or reset them manually.

Infinitely appending element into static/global variable will lead to OOM(Out of Memory).

class Test
{
    public static $array = [];
    public static $string = '';
}

// Controller
public function test(Request $req)
{
    // Out of Memory
    Test::$array[] = $req->input('param1');
    Test::$string .= $req->input('param2');
}

Memory leak detection method

Modify config/laravels.php: worker_num=1, max_request=1000000, remember to change it back after test;

Add routing /debug-memory-leak without route middleware to observe the memory changes of the Worker process;

Start LaravelS and request /debug-memory-leak until diff_mem is less than or equal to zero; if diff_mem is always greater than zero, it means that there may be a memory leak in Global Middleware or Laravel Framework;

After completing Step 3, alternately request the business routes and /debug-memory-leak (It is recommended to use ab/wrk to make a large number of requests for business routes), the initial increase in memory is normal. After a large number of requests for the business routes, if diff_mem is always greater than zero and curr_mem continues to increase, there is a high probability of memory leak; If curr_mem always changes within a certain range and does not continue to increase, there is a low probability of memory leak.

If you still can't solve it, max_request is the last guarantee.

Linux kernel parameter adjustment

Linux kernel parameter adjustment

Pressure test

Pressure test

Alternatives

Sponsor

PayPal

BTC

Gitee

Author: hhxsv5
Source Code: https://github.com/hhxsv5/laravel-s 
License: MIT License

#php #laravel #http