What Is Go Good for? (and What Is Golang Used For?)

In 2007, frustrated by some of C++’s inefficiencies and overcomplicated nature, and desiring a programming language designed specifically for multi-core processors and effectively managing large projects, three Google engineers, Robert Griesemer, Rob Pike, and Ken Thompson, designed the Go language.

The goal was to build an improved C++ that was much easier to use — Go was developed based on C’s disciplined syntax — but also took inspiration from some of Python’s simplicity and Javascript’s useful features.

This combination makes Go one of the most effective languages for large-scale infrastructure, and one of the simplest languages for debugging complex projects.

go vs python javascript c c++

The open-source Go project was first announced in 2009, and version 1.0 was officially released in 2012. Major new features have since been added, such as generics and error handling in 2018.

Go vs Golang: what to call Go

The official name of the language is Go, with the confusion over its name mostly due to the  golang.org domain name (go.org wasn’t available).

Though the official term is Go, some find Golang is more convenient to use and prevents confusion with the strategy game Go, so it survives as a cherished alternative name.

#golang #go

What is GEEK

Buddha Community

What Is Go Good for? (and What Is Golang Used For?)
Chloe  Butler

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

  1. Design the PCB using your favorite CAD or drawing software.
  2. Print the top and bottom copper and top silk screen layers to a PDF file.
  3. Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
  4. Use a Gerber viewer to double-check the output against the original PCB design.
  5. Make adjustments as needed.
  6. Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.


pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl 

Fannie  Zemlak

Fannie Zemlak

1599854400

What's new in the go 1.15

Go announced Go 1.15 version on 11 Aug 2020. Highlighted updates and features include Substantial improvements to the Go linker, Improved allocation for small objects at high core counts, X.509 CommonName deprecation, GOPROXY supports skipping proxies that return errors, New embedded tzdata package, Several Core Library improvements and more.

As Go promise for maintaining backward compatibility. After upgrading to the latest Go 1.15 version, almost all existing Golang applications or programs continue to compile and run as older Golang version.

#go #golang #go 1.15 #go features #go improvement #go package #go new features

Go-web-workshop: Build Web Applications with Go on App Engine

Building Web Applications with Go

Welcome, gopher! You're not a gopher? Well, this workshop is for gophers, or people that use the Go programming language. But fear not if you've never written any Go before! I'd recommend you learn the basics for the language first with the Go tour.

This workshop has been run a couple of times with an instructor leading. The goal of this repo is to make it as easy as possible for individuals to follow the content by themselves. If you get stuck at any point, feel free to file issues asking questions.

Setting up your workspace

To go through this you will need the following:

  1. You have installed the Go Programming Language.
  2. You have set up a GOPATH by following the How to Write Go Code tutorial.
  3. You are somewhat familiar with the basics of Go. (The Go Tour is a pretty good place to start)
  4. You have a Google account and you have installed the Google Cloud SDK.

Contents

There's a lot to say about how to build web applications, in Go or any other language. But we only have one day so we won't try to cover too much. Instead we'll cover the basics, so you'll be able to explore other solutions and frameworks later.

The workshops is divided in eleven sections:

Resources

These are places where you can find more information for Go:

My favorite aspect of Go is its community, and you are now part of it too. Welcome!

As a newcomer to the Go community you might have questions or get blocked at some point. This is completely normal, and we're here to help you. Some of the places where gophers tend to hang out are:

Disclaimer

This is not an official Google product (experimental or otherwise), it is just code that happens to be owned by Google.

Author: Campoy
Source Code: https://github.com/campoy/go-web-workshop 
License: Apache-2.0 license

#go #golang #web 

Fannie  Zemlak

Fannie Zemlak

1599732000

“Go Has Indeed Become The Language Of Cloud Infrastructure“ - Rob Pike

Introduction

We spoke to Rob Pike, the co-author of the Go programming language, about a career spanning four decades, the evolution of Go over the last ten years, and into the future.

The Interview

Evrone: Unlike many developers today, you started your career decades ago at Bell Labs. What’s been the biggest change in the way we develop software that you can think of, given your rare perspective?

**Rob: **The scale is much bigger today. Not just of the computers and the network, but the programs themselves. All of Unix version 6 (circa 1975) fits comfortably on a single RK05 disk pack, which has just over 2MB of storage, with lots of room left over for user software. And that was a fine computing environment, or at least seemed like one at the time. Although I can, of course, explain much of the growth, it is astonishing and perhaps not all of it is justified.

#golang #golang-api #golang-tools #golang-website #rob-pike #interview-transcript-go #latest-tech-stories #cloud-infrastructure-and-go

Zander  Herzog

Zander Herzog

1596793260

Secure HTTPS servers in Go

In this article, we are going to look at some of the basic APIs of the http package to create and initialize HTTPS servers in Go.

Image for post

(source: unsplash.com)

In the “Simple Hello World Server” lesson, we learned about net/http package, how to create routes and how [ServeMux](https://golang.org/pkg/net/http/#ServeMux) works. In the “Running multiple HTTP servers” lesson, we learned about [Server](https://golang.org/pkg/net/http/#Server) structure and how to run multiple HTTP servers concurrently.

In this lesson, we are going to create an HTTPS server using both Go’s standard server configuration and custom configuration (using [_Server_](https://golang.org/pkg/net/http/#Server) structure). But before this, we need to know what HTTPS really is?

HTTPS is a big topic of discussion in itself. Hence while writing this lesson, I published an article just on “How HTTPS works?”. I advise you to read this lesson first before continuing this article. In this article, I’ve also described the encryption paradigm and SSL certificates generation process.


If we recall the simplest HTTP server example from previous lessons, we only need http.``[ListenAndServe](https://golang.org/pkg/net/http/#ListenAndServe) function to start an HTTP server and http.``[HandleFunc](https://golang.org/pkg/net/http/#HandleFunc) to register a response handler for a particular endpoint.

Image for post

(https://play.golang.org/p/t3sOenOYAzS)

In the example above, when we run the command go run server.go , it will start an HTTP server on port 9000. By visiting http://localhost:9000 URL in a browser, you will be able to see a Hello World! message on the screen.

Image for post

(http://localhost:9000)

As we know, the nil argument to ListenAndServe() call invokes Go to use the [DefaultServeMux](https://golang.org/pkg/net/http/#DefaultServeMux) response multiplexer, which is the default instance of ServeMux structure provided globally by the Go. The HandleFunc() call adds a response handler for a specific route on the multiplexer instance.

The http.ListenAndServe() call uses the Go’s standard HTTP server configuration, however, in the previous lesson, how we can customize a server using [Server](https://golang.org/pkg/net/http/#Server) structure type.

To start an HTTPS server, all we need do is to call ServerAndListenTLS method with some configuration. Just like ServeAndListen method, this method is available on both the http package and the Server structure.

The http.``[ServeAndListenTLS](https://golang.org/pkg/net/http/#ListenAndServeTLS) method uses the Go’s standard server implementation, however, both [Server](https://golang.org/pkg/net/http/#Server) instance and Server.``[ServeAndListenTLS](https://golang.org/pkg/net/http/#Server.ListenAndServeTLS) method can be configured for our needs.

#go-programming-language #go #golang-tutorial #go-programming #golang