Mark Johnson

1641297130

Why Is My Epson Printer Not Recognizing the wireless network?

The WIFI Setup process on the Epson printer is really easy. you can easily connect an printer to the wireless network by going into the wireless network settings. However, some users can’t connect their printer to the wireless network. when they enter the wireless password and click on the ok or done button. It shows them can’t connect to this network error. 

Generally, this type of error appears when wireless signals are weak but there might be several other reason for wireless connection failure issue. Here In this article, I will share the complete guide to fix the Epson printer problems. 

How to fix epson printer can’t connect to the wireless network? 

  1. When epson printer is not recognizing the wireless network, please check that your printer is available in the wireless range. If not so, you need to place the printer in the wifi range.
  2. Please make sure that the wireless signal broadcasting has been enabled from the router settings. if not so, you won’t be able to see the wireless network in your computer.
  3. If your epson printer showing the wireless network but when you click on it, it won’t ask for the wireless network name or password. that means, there is already a wireless profile existing with the same name. so you need to reset the network settings to fix that error. now retry to connect the printer to the wireless network.
  4. Sometimes, epson printer can’t connect to the WIFI because of the incorrect network password. so you need to check the password and then retry to join the wireless network.
  5. If you have already tried the above tricks but wifi is not working on the epson machine, let’s reset the wireless router and printer and then create a new network. now try to connect your printer through this network.

After changing all these settings, your epson printer will be connected to the wireless network. in case, if you are having some kind of other issues. please visit askprob blogs for more help. 

 

What is GEEK

Buddha Community

Why Is My Epson Printer Not Recognizing the wireless network?

Gloria Jenkins

1607490927

Epson printer support

If you face an Epson printer malfunction, you first go for technical assistance directly from the official tech support center. They would only supply you with an internet service, which will take a lot of time and will also provide very little or no support. With the aid of Epson Printer technical assistance, the errors in Epson printers are quickly handled. We provide our customers with the best Epson customer support. To overcome the challenges, we have a team of well-experienced and qualified experts.
Get More info: https://epsonprintersupports.com/

#epson printers support #epson printer support #epson printer support number #epson printer technical support number #epson printer technical support #epson printer customer service

James William

1623132022

How do I Reset my Epson Wireless Printer?

Check Out the Quick Guide to Reset Wireless Epson Printer Instantly!

Epson printer is one of the major printer manufacturers that offers a wide range of inkjet and laser printers. Indeed, the features of the Epson printers are incredible, but despite the best features offered by the device, the user might face some issues that can be resolved by opting for resetting the printer.

So, for the users who have purchased a wireless Epson printer and looking for the detailed process to reset the device, they can go through the quick steps discussed in this article.

What is the Procedure to Reset the Epson Wireless Printer?

For the users who are looking for the exact procedure to reset Epson wireless printer, here are the quick steps that one can follow to access uninterrupted printing services.

  • For this process, the user needs to open the control panel section by clicking on the Home button.
  • Then, using the left and right navigation buttons, the user can access the Setup menu and click on the OK.
  • Again using the right and left navigation buttons, the user can select the restore settings option and select OK.
  • After that, using the up and down button, the user can select the restore network settings option.
  • Once done, the user can restart the Epson printer and check if the settings are restored to default or not.

Thus, this is the simple procedure that the user can follow to reset the Epson printer. For any reason, if the user fails to resolve their query on how to reset Epson printer, the user can reach out to the technician team and manage their printing activities accordingly. So, with this for all the users facing minor glitches with their printer can make use of the provided info.

#how to reset epson wireless printer #how to reset epson printer wifi #reset epson printer wireless settings

Sharon Young

1623743190

How do I Connect my Epson L3150 to Wi-Fi?

How to Connect Epson L3150 to WiFi?

Epson L3150 printers are one of the best devices that many people use in their printing tasks. It is crucial to know about the valid process that allows you to connect this printer to Wi-Fi. It is vital to connect this printer to Wi-Fi to use various features which this printer offers.

Connect Epson L3150 TO Wi-Fi Having LCD Screen:

  • Use the Wi-Fi setup option by using the Left or Right arrow keys to find this setup.
  • After this, you need to select the WPS or push button to complete your process.
  • Press the WPS button on your route to search your Epson L3150 printer.
  • On your printer select OK to continue with this process and wait for automatic connection.
  • On asking, enter the password and press the OK button to complete the setup process.

Connect Epson L3150 TO Wi-Fi Without LCD Screen:

  • In the beginning, you are required to press the Wi-Fi button and hold it for 30 seconds.
  • When the Wi-Fi lights start flashing, press the WPS button on your router and it will search for available devices.
  • The light indicating Wi-Fi will continue to flash once the wireless connection is successful.
  • In the end, the whole process will complete, and the light on both the Epson printer and router will start flashing together.

Now, you can easily know about the process to connect the Epson L3150 printer to Wi-Fi. If you want to know more about How to Connect Epson Printer to WiFi? get in touch with the repair person of Epson printers. Ask them about the additional details and obtain them for using that to facilitate the process to connect Epson printers to Wi-Fi.

#how to connect epson l3150 to wifi #connect epson l3150 printer to wifi #setup epson l3150 printer #epson l3150 wireless setup

Error Code

1619767497

Reset Or Change Verizon Password - Canon Printer Error Code 5200

Canon printers provide high-quality printing facilities and can be used in both the home and the office. Millions of users around the world choose Canon printers for the simple reason that they can print any document or access the printer in a user-friendly manner. Users can sometimes experience a few irritating bugs, which they are unable to resolve on their own due to a lack of technical expertise. Canon Printer Error Code 5200 is one of the most common issues. An error code like this appears on the computer screen, and the printer ceases printing. Your printer will not work until you resolve this problem. Are you looking for a solution for How to Fix Canon Printer Error Code 5200? Don’t move further. Our technical experts is here to provide you best solutions related to your issues

Why does the Canon Printer Error Code 5200 occur?

The Canon Printer Error 5200 is caused by low ink levels, but can also be caused by faulty cartridges or a printer’s logic board problem. To make black, the Canon printer is designed to combine all colors of the remaining ink. In simple words, this means that the ink cartridge in your Canon printer is either empty or nearly empty. As a result, the operator checks the ink level guide and notices that the black has disappeared and the colors are almost gone. You can also contact us on our toll-free phone at +1-866-231-0111. One of our knowledgeable engineers will troubleshoot your issue and ensure that your Canon printer system is error-free.

Solutions To Fix Canon Printer Error 5200 with easy steps

Solution 1: Refill all your cartridges/ink tanks with new ink.

  1. Check the ink levels in your black and colored ink cartridges and refill them if necessary.
  2. Once you have filled the black cartridge, make sure that you have also filled the colored ink cartridge. If you don’t then you will get this error.

Solution 2: Manually clean the cartridge/print head
Unplug your printer’s power cable and keep it off for an hour.
2. Next, remove the ink cartridges from your printer and thoroughly clean their heads.
3. Replace the cartridge, reconnect the power cord, and restart your printer to see if the error has been fixed.

Solution 3: Reset the factory (default) settings on your Canon printer.
We are going to reset the printer settings to factory defaults with these measures.

  1. To turn off your printer, press the turn ON 'button.
  2. Wait for the printer to shut down before proceeding.
  3. Now, with your right hand, press and hold the ‘Stop’ button while pressing and holding the ‘ON’ button with your left hand. After 2-3 seconds, release the ‘Stop’ button and hold down the ‘ON’ button with your left hand.
  4. While holding down the button ON button, press the Push Stop button 5 times. The yellow triangle lights below should be turned on and each time you click the stop button at an interval of about 2 seconds.
  5. When you release all the keys, the LCD display will be blank, but the ON button will start blinking. This indicates that your printer is about to be reset. If your machine tells you that it is installing new hardware at this level, ignore it.
  6. When the ON button stops flashing and displays a steady green light, you’re done. Once pressed, wait for your printer to shut down.
  7. Take out the cartridge from the printer. Clean the print thoroughly before replacing the cartridge in the printer. Then, to turn on your printer, click the button ON 'button.
    This is everything. You should try printing now, and your printer should work normally.

After completing the above-written material, you will note that the error 5200 has disappeared. However, if you continue to receive the same error code while printing on your computer screen, you can contact Tech-Geeks via the Canon Printer Support Number at +1-866-231-0111. When you have to call this number for assistance, you can get the exact answer to your printer-related question from the experts.

Source: https://sites.google.com/view/resetchangeverizonmailpasswod/blogs/canon-printer-error-code-5200

#canon printer error code 5200 #canon printer error 5200 code #canon printer error 5200 #canon printer error #canon printer tech support #canon printer

Marlon  Boyle

Marlon Boyle

1594312560

Autonomous Driving Network (ADN) On Its Way

Talking about inspiration in the networking industry, nothing more than Autonomous Driving Network (ADN). You may hear about this and wondering what this is about, and does it have anything to do with autonomous driving vehicles? Your guess is right; the ADN concept is derived from or inspired by the rapid development of the autonomous driving car in recent years.

Image for post

Driverless Car of the Future, the advertisement for “America’s Electric Light and Power Companies,” Saturday Evening Post, the 1950s.

The vision of autonomous driving has been around for more than 70 years. But engineers continuously make attempts to achieve the idea without too much success. The concept stayed as a fiction for a long time. In 2004, the US Defense Advanced Research Projects Administration (DARPA) organized the Grand Challenge for autonomous vehicles for teams to compete for the grand prize of $1 million. I remembered watching TV and saw those competing vehicles, behaved like driven by drunk man, had a really tough time to drive by itself. I thought that autonomous driving vision would still have a long way to go. To my surprise, the next year, 2005, Stanford University’s vehicles autonomously drove 131 miles in California’s Mojave desert without a scratch and took the $1 million Grand Challenge prize. How was that possible? Later I learned that the secret ingredient to make this possible was using the latest ML (Machine Learning) enabled AI (Artificial Intelligent ) technology.

Since then, AI technologies advanced rapidly and been implemented in all verticals. Around the 2016 time frame, the concept of Autonomous Driving Network started to emerge by combining AI and network to achieve network operational autonomy. The automation concept is nothing new in the networking industry; network operations are continually being automated here and there. But this time, ADN is beyond automating mundane tasks; it reaches a whole new level. With the help of AI technologies and other critical ingredients advancement like SDN (Software Defined Network), autonomous networking has a great chance from a vision to future reality.

In this article, we will examine some critical components of the ADN, current landscape, and factors that are important for ADN to be a success.

The Vision

At the current stage, there are different terminologies to describe ADN vision by various organizations.
Image for post

Even though slightly different terminologies, the industry is moving towards some common terms and consensus called autonomous networks, e.g. TMF, ETSI, ITU-T, GSMA. The core vision includes business and network aspects. The autonomous network delivers the “hyper-loop” from business requirements all the way to network and device layers.

On the network layer, it contains the below critical aspects:

  • Intent-Driven: Understand the operator’s business intent and automatically translate it into necessary network operations. The operation can be a one-time operation like disconnect a connection service or continuous operations like maintaining a specified SLA (Service Level Agreement) at the all-time.
  • **Self-Discover: **Automatically discover hardware/software changes in the network and populate the changes to the necessary subsystems to maintain always-sync state.
  • **Self-Config/Self-Organize: **Whenever network changes happen, automatically configure corresponding hardware/software parameters such that the network is at the pre-defined target states.
  • **Self-Monitor: **Constantly monitor networks/services operation states and health conditions automatically.
  • Auto-Detect: Detect network faults, abnormalities, and intrusions automatically.
  • **Self-Diagnose: **Automatically conduct an inference process to figure out the root causes of issues.
  • **Self-Healing: **Automatically take necessary actions to address issues and bring the networks/services back to the desired state.
  • **Self-Report: **Automatically communicate with its environment and exchange necessary information.
  • Automated common operational scenarios: Automatically perform operations like network planning, customer and service onboarding, network change management.

On top of those, these capabilities need to be across multiple services, multiple domains, and the entire lifecycle(TMF, 2019).

No doubt, this is the most ambitious goal that the networking industry has ever aimed at. It has been described as the “end-state” and“ultimate goal” of networking evolution. This is not just a vision on PPT, the networking industry already on the move toward the goal.

David Wang, Huawei’s Executive Director of the Board and President of Products & Solutions, said in his 2018 Ultra-Broadband Forum(UBBF) keynote speech. (David W. 2018):

“In a fully connected and intelligent era, autonomous driving is becoming a reality. Industries like automotive, aerospace, and manufacturing are modernizing and renewing themselves by introducing autonomous technologies. However, the telecom sector is facing a major structural problem: Networks are growing year by year, but OPEX is growing faster than revenue. What’s more, it takes 100 times more effort for telecom operators to maintain their networks than OTT players. Therefore, it’s imperative that telecom operators build autonomous driving networks.”

Juniper CEO Rami Rahim said in his keynote at the company’s virtual AI event: (CRN, 2020)

“The goal now is a self-driving network. The call to action is to embrace the change. We can all benefit from putting more time into higher-layer activities, like keeping distributors out of the business. The future, I truly believe, is about getting the network out of the way. It is time for the infrastructure to take a back seat to the self-driving network.”

Is This Vision Achievable?

If you asked me this question 15 years ago, my answer would be “no chance” as I could not imagine an autonomous driving vehicle was possible then. But now, the vision is not far-fetch anymore not only because of ML/AI technology rapid advancement but other key building blocks are made significant progress, just name a few key building blocks:

  • software-defined networking (SDN) control
  • industry-standard models and open APIs
  • Real-time analytics/telemetry
  • big data processing
  • cross-domain orchestration
  • programmable infrastructure
  • cloud-native virtualized network functions (VNF)
  • DevOps agile development process
  • everything-as-service design paradigm
  • intelligent process automation
  • edge computing
  • cloud infrastructure
  • programing paradigm suitable for building an autonomous system . i.e., teleo-reactive programs, which is a set of reactive rules that continuously sense the environment and trigger actions whose continuous execution eventually leads the system to satisfy a goal. (Nils Nilsson, 1996)
  • open-source solutions

#network-automation #autonomous-network #ai-in-network #self-driving-network #neural-networks