Best Practices When Using Terraform

1. Overview

Previously, we’ve covered Terraform’s basic concepts and usage. Now, let’s dig deeper and cover some of the best practices when using this popular DevOps tool.

2. Resource Files Organization

When we start using Terraform, it’s not uncommon to put every resource definition, variable, and output in a single file. This approach, however, quickly leads to code that is hard to maintain and even harder to reuse.

A better approach is to take benefit from the fact that, within a module, Terraform will read any “.tf” file and process its contents. The order in which we declare resources in those is not relevant – this is Terraform’s job, after all. We should keep them organized so that we can better understand what’s going on.

Here, consistency is more important than how we choose to organize resources in our files. A common practice is to use at least three files per module:

  • variables.tf: All module’s input variables go here, along with their default values when applicable
  • main.tf: This is where we’ll put our resource definitions. Assuming that we’re using the Single Responsibility principle, its size should stay under control
  • _modules: _If our module contains any sub-modules, this is where they’ll go
  • outputs.tf: Exported data items should go here
  • _providers.tf: _Used only on the top-level directory, declares which providers we’ll use in the project, including their versions

This organization allows any team member that wants to use our module to locate which are the required variables and output data quickly.

Also, as our module evolves, we must keep an eye on the main.tf file’s size. A good sign that we should consider refactoring it into sub-modules is when it starts to grow in size. At this point, we should refactor it by moving tightly-coupled resources, such as an EC2 instance and an attached EBS volume, into nested modules. In the end, the chances are that our top-level main.tf file contains only module references stitched together.

3. Modules Usage

Modules are a powerful tool, but, as in any larger software project, it takes some time to get the right level of abstraction so we can maximize reuse across projects. Given the fact that Terraform, as the whole infrastructure-as-code practice, is relatively new, this is an area where we see many different approaches.

That said, we can still reuse some lessons learned from application codebases that can help with proper module organization. Among those lessons, the Single Responsibility from the S.O.L.I.D set of principles is quite useful.

In our context, this means a module should focus on a single aspect of the infrastructure, such as setting up a VPC or creating a virtual machine – and just that.

#cloud #devops #terraform

What is GEEK

Buddha Community

Best Practices When Using Terraform
bindu singh

bindu singh

1647351133

Procedure To Become An Air Hostess/Cabin Crew

Minimum educational required – 10+2 passed in any stream from a recognized board.

The age limit is 18 to 25 years. It may differ from one airline to another!

 

Physical and Medical standards –

  • Females must be 157 cm in height and males must be 170 cm in height (for males). This parameter may vary from one airline toward the next.
  • The candidate's body weight should be proportional to his or her height.
  • Candidates with blemish-free skin will have an advantage.
  • Physical fitness is required of the candidate.
  • Eyesight requirements: a minimum of 6/9 vision is required. Many airlines allow applicants to fix their vision to 20/20!
  • There should be no history of mental disease in the candidate's past.
  • The candidate should not have a significant cardiovascular condition.

You can become an air hostess if you meet certain criteria, such as a minimum educational level, an age limit, language ability, and physical characteristics.

As can be seen from the preceding information, a 10+2 pass is the minimal educational need for becoming an air hostess in India. So, if you have a 10+2 certificate from a recognized board, you are qualified to apply for an interview for air hostess positions!

You can still apply for this job if you have a higher qualification (such as a Bachelor's or Master's Degree).

So That I may recommend, joining Special Personality development courses, a learning gallery that offers aviation industry courses by AEROFLY INTERNATIONAL AVIATION ACADEMY in CHANDIGARH. They provide extra sessions included in the course and conduct the entire course in 6 months covering all topics at an affordable pricing structure. They pay particular attention to each and every aspirant and prepare them according to airline criteria. So be a part of it and give your aspirations So be a part of it and give your aspirations wings.

Read More:   Safety and Emergency Procedures of Aviation || Operations of Travel and Hospitality Management || Intellectual Language and Interview Training || Premiere Coaching For Retail and Mass Communication |Introductory Cosmetology and Tress Styling  ||  Aircraft Ground Personnel Competent Course

For more information:

Visit us at:     https://aerofly.co.in

Phone         :     wa.me//+919988887551 

Address:     Aerofly International Aviation Academy, SCO 68, 4th Floor, Sector 17-D,                            Chandigarh, Pin 160017 

Email:     info@aerofly.co.in

 

#air hostess institute in Delhi, 

#air hostess institute in Chandigarh, 

#air hostess institute near me,

#best air hostess institute in India,
#air hostess institute,

#best air hostess institute in Delhi, 

#air hostess institute in India, 

#best air hostess institute in India,

#air hostess training institute fees, 

#top 10 air hostess training institute in India, 

#government air hostess training institute in India, 

#best air hostess training institute in the world,

#air hostess training institute fees, 

#cabin crew course fees, 

#cabin crew course duration and fees, 

#best cabin crew training institute in Delhi, 

#cabin crew courses after 12th,

#best cabin crew training institute in Delhi, 

#cabin crew training institute in Delhi, 

#cabin crew training institute in India,

#cabin crew training institute near me,

#best cabin crew training institute in India,

#best cabin crew training institute in Delhi, 

#best cabin crew training institute in the world, 

#government cabin crew training institute

Chloe  Butler

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

  1. Design the PCB using your favorite CAD or drawing software.
  2. Print the top and bottom copper and top silk screen layers to a PDF file.
  3. Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
  4. Use a Gerber viewer to double-check the output against the original PCB design.
  5. Make adjustments as needed.
  6. Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.


pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl 

Why Use WordPress? What Can You Do With WordPress?

Can you use WordPress for anything other than blogging? To your surprise, yes. WordPress is more than just a blogging tool, and it has helped thousands of websites and web applications to thrive. The use of WordPress powers around 40% of online projects, and today in our blog, we would visit some amazing uses of WordPress other than blogging.
What Is The Use Of WordPress?

WordPress is the most popular website platform in the world. It is the first choice of businesses that want to set a feature-rich and dynamic Content Management System. So, if you ask what WordPress is used for, the answer is – everything. It is a super-flexible, feature-rich and secure platform that offers everything to build unique websites and applications. Let’s start knowing them:

1. Multiple Websites Under A Single Installation
WordPress Multisite allows you to develop multiple sites from a single WordPress installation. You can download WordPress and start building websites you want to launch under a single server. Literally speaking, you can handle hundreds of sites from one single dashboard, which now needs applause.
It is a highly efficient platform that allows you to easily run several websites under the same login credentials. One of the best things about WordPress is the themes it has to offer. You can simply download them and plugin for various sites and save space on sites without losing their speed.

2. WordPress Social Network
WordPress can be used for high-end projects such as Social Media Network. If you don’t have the money and patience to hire a coder and invest months in building a feature-rich social media site, go for WordPress. It is one of the most amazing uses of WordPress. Its stunning CMS is unbeatable. And you can build sites as good as Facebook or Reddit etc. It can just make the process a lot easier.
To set up a social media network, you would have to download a WordPress Plugin called BuddyPress. It would allow you to connect a community page with ease and would provide all the necessary features of a community or social media. It has direct messaging, activity stream, user groups, extended profiles, and so much more. You just have to download and configure it.
If BuddyPress doesn’t meet all your needs, don’t give up on your dreams. You can try out WP Symposium or PeepSo. There are also several themes you can use to build a social network.

3. Create A Forum For Your Brand’s Community
Communities are very important for your business. They help you stay in constant connection with your users and consumers. And allow you to turn them into a loyal customer base. Meanwhile, there are many good technologies that can be used for building a community page – the good old WordPress is still the best.
It is the best community development technology. If you want to build your online community, you need to consider all the amazing features you get with WordPress. Plugins such as BB Press is an open-source, template-driven PHP/ MySQL forum software. It is very simple and doesn’t hamper the experience of the website.
Other tools such as wpFoRo and Asgaros Forum are equally good for creating a community blog. They are lightweight tools that are easy to manage and integrate with your WordPress site easily. However, there is only one tiny problem; you need to have some technical knowledge to build a WordPress Community blog page.

4. Shortcodes
Since we gave you a problem in the previous section, we would also give you a perfect solution for it. You might not know to code, but you have shortcodes. Shortcodes help you execute functions without having to code. It is an easy way to build an amazing website, add new features, customize plugins easily. They are short lines of code, and rather than memorizing multiple lines; you can have zero technical knowledge and start building a feature-rich website or application.
There are also plugins like Shortcoder, Shortcodes Ultimate, and the Basics available on WordPress that can be used, and you would not even have to remember the shortcodes.

5. Build Online Stores
If you still think about why to use WordPress, use it to build an online store. You can start selling your goods online and start selling. It is an affordable technology that helps you build a feature-rich eCommerce store with WordPress.
WooCommerce is an extension of WordPress and is one of the most used eCommerce solutions. WooCommerce holds a 28% share of the global market and is one of the best ways to set up an online store. It allows you to build user-friendly and professional online stores and has thousands of free and paid extensions. Moreover as an open-source platform, and you don’t have to pay for the license.
Apart from WooCommerce, there are Easy Digital Downloads, iThemes Exchange, Shopify eCommerce plugin, and so much more available.

6. Security Features
WordPress takes security very seriously. It offers tons of external solutions that help you in safeguarding your WordPress site. While there is no way to ensure 100% security, it provides regular updates with security patches and provides several plugins to help with backups, two-factor authorization, and more.
By choosing hosting providers like WP Engine, you can improve the security of the website. It helps in threat detection, manage patching and updates, and internal security audits for the customers, and so much more.

Read More

#use of wordpress #use wordpress for business website #use wordpress for website #what is use of wordpress #why use wordpress #why use wordpress to build a website

FAQs On a Udemy clone app That You Should Know Before Buying!

BSETEC's Udemy clone app based on formalized teaching but with the help of electronic resources is known as E-learning.E-learning, also referred to as online learning or electronic learning, is the acquisition of knowledge which takes place through electronic technologies .

Udemy, which was founded more than a decade ago, has established itself as a global leader in the online teaching industry. People in our digital era rely on technology and devices for nearly everything, including education. When it comes to online learning, or eLearning, which is regarded as a lifesaver– capable of sustaining the educational environment even during the Covid-19 pandemic– it has evolved into a platform bursting with potential, not only for students but also for tutors, educators, and instructors. Furthermore, when compared to traditional educational techniques, the flexibility and customization given by online tutoring software like Expertplus LMS are unrivalled. As a result, it is gradually becoming an important component of the learning process, which is why eLearning is here to stay– even after the epidemic has passed, it is a huge increase in the number of eLearning applications and websites, and most businesses are choosing for Udemy Clone App instead of starting from scratch.

BigBlueButton Technology – Make Efficient Interaction with LMS

How can I get started with your own online tutoring company?

To use the Udemy Clone App script to establish an online tutoring marketplace similar to Udemy, bear the following factors in mind:

  • How to define your target audience?– Before you start developing your Learning Management System, you should think about who you're going to serve, what their background is, what kind of job they want to do, and what their career goals are. These are all things to consider before you begin the development process. As a result, you must be clear about who you are developing your app for.
  • Why have a clear set of goals and objectives in mind?– If you're creating an app for eLearning, you should have a solid strategy and set of goals in mind. You can't simply take a leap of faith and draw conclusions. You must have both long and short term objectives, and you must put them into action.
  • Why create a simple and speedy registration process?– No one wants to spend more than a minute or two on a signup screen, especially if the app is intended for educational reasons. As a result, it's critical that the user registration, login, and signup procedure be simple and quick. It should provide one-tap or social login options so that the AI can read the social account and fill in the data on its own.
  • Why have a visually appealing homepage– "The first impression is the final impression" and "The last impression is the enduring impression" are two prominent expressions. When you initially open the app, the first thing that appears on your screen is the homepage, and if it isn't appealing enough, you will most likely not want to use it. As a result, the user interface must be simple to use and appealing to the eye.
  • Why do we alter and revise– Once you've begun creating the app, you can customise and revise it to meet the needs of your users, thanks to the Udemy Clone Script's high level of customization and a large range of templates and motifs to select from.


If you want to develop a platform with high-quality eLearning features that cater to the needs of a large mass of audience, then opt for ExpertPlus LMS, and contact BSEtec now! Hurry!

#Best Learning Management Software #Udemy Clone Script  #Best LMS App #Best LMS Platform #Best Open Source Web Conferencing System #Learning Management Portal #Learning Management Software
 

Remote Teams and Good Time Management

This year’s global pandemic has forced the fast adjustment for many organizations from in-office normality to a remote working setup at whiplash speed. The rapid adoption of remote working is not easy though—even without the pressure of COVID.

Challenges are abundant for both those with remote working experience and those without. Managers and team leaders are struggling to keep their teams motivated and efficient. Remote teams are often seen as more difficult to manage, but the tips discussed in this article can help you overcome these challenges.

Empower Remote Team Members

Before digging deeper into time and task management, there are actually several basic steps that you need to complete in order to make remote teams effective. The first thing you want to do is making sure that team members can communicate easily and effectively, and that means establishing a way of communicating that everyone is comfortable with.

Most teams turn to Slack, but Slack is not always the best tool for the job. If your team puts emphasis on project management, for instance, using digital Kanban tools with built-in chat feature can be more effective and other communication tools such as Google Mail with Google Chat and Meet integrations are helpful. Microsoft has a similar suite of tools if you’re inclined to that choice of software.

To further empower team members, integrate a good task management platform. There is no way to keep track of everything when team members have to organize their tasks individually. The easier way to establish a baseline for remote working is by using a project or task management tool that turns tasks into blocks waiting to be managed such as Trello, Asana or Basecamp.

Lastly, encourage team members to create a productive environment that works for them. Some startups and corporations are starting to provide team members with aids to help them set up a more comfortable and functional home office. This is the kind of initiative that puts team members in the right mindset for effective remote working.

#best practices #blog #devops #best practices #devops best practices #remote working