How to Build & Deloy Lottery Smart Contract with LINK using Hardhat

Getting Started

Requirements

git
- You'll know you did it right if you can run git --version and you see a response like git version x.x.x
Nodejs
- You'll know you've installed nodejs right if you can run:
  - node --version and get an ouput like: vx.x.x
Yarn instead of npm
- You'll know you've installed yarn right if you can run:
  - yarn --version and get an output like: x.x.x
  - You might need to install it with npm or corepack

Quickstart

git clone https://github.com/smartcontractkit/smart-contract-examples
cd lottery
yarn
yarn typechain

Usage

Deploy:

yarn hardhat deploy

Testing

yarn hardhat test

Test Coverage

yarn hardhat coverage

Deployment to a testnet or mainnet

Setup environment variabltes

You'll want to set your RINKEBY_RPC_URL and PRIVATE_KEY as environment variables. You can add them to a .env file, similar to what you see in .env.example.

PRIVATE_KEY: The private key of your account (like from metamask). NOTE: FOR DEVELOPMENT, PLEASE USE A KEY THAT DOESN'T HAVE ANY REAL FUNDS ASSOCIATED WITH IT.
- You can learn how to export it here.
RINKEBY_RPC_URL: This is url of the rinkeby testnet node you're working with. You can get setup with one for free from Alchemy

2. Get testnet ETH

Head over to faucets.chain.link and get some tesnet ETH & LINK. You should see the ETH and LINK show up in your metamask. You can read more on setting up your wallet with LINK.

3. Setup a Chainlink VRF Subscription ID

Head over to vrf.chain.link and setup a new subscription, and get a subscriptionId. You can reuse an old subscription if you already have one.

You can follow the instructions if you get lost. You should leave this step with:

A subscription ID
Your subscription should be funded with LINK
Deploy

In your helper-hardhat-config.ts add your subscriptionId under the section of the chainId you're using (aka, if you're deploying to rinkeby, add your subscriptionId in the subscriptionId field under the 4 section.)

Then run:

yarn hardhat deploy --network rinkeby

And copy / remember the contract address.

Add your contract address as a Chainlink VRF Consumer

Go back to vrf.chain.link and under your subscription add Add consumer and add your contract address. You should also fund the contract with a minimum of 1 LINK.

4. Register a Chainlink Keepers Upkeep

You can follow the documentation if you get lost.

Go to keepers.chain.link and register a new upkeep.

5. Enter your raffle!

You're contract is now setup to be a tamper proof autonomous verifiably random lottery. Enter the lottery by running:

yarn hardhat run scripts/enter.ts --network rinkeby

Estimate gas cost in USD

To get a USD estimation of gas cost, you'll need a COINMARKETCAP_API_KEY environment variable. You can get one for free from CoinMarketCap.

Then, uncomment the line coinmarketcap: COINMARKETCAP_API_KEY, in hardhat.config.ts to get the USD estimation. Just note, everytime you run your tests it will use an API call, so it might make sense to have using coinmarketcap disabled until you need it. You can disable it by just commenting the line back out.

Verify on etherscan

If you deploy to a testnet or mainnet, you can verify it if you get an API Key from Etherscan and set it as an environemnt variable named ETHERSCAN_API_KEY. You can pop it into your .env file as seen in the .env.example.

In it's current state, if you have your api key set, it will auto verify kovan contracts!

However, you can manual verify with:

yarn hardhat verify --constructor-args arguments.ts DEPLOYED_CONTRACT_ADDRESS

Optional Charity Raffle

This repo also includes the option to deploy a raffle where players enter by donating to their choice of one of three charities. On deployment, the charity raffle contract is funded with the jackpot for the player winner. The Chainlink keepers end the charity raffle and the VRF picks a player winner. Once the lottery ends, the contract funder has the option to match the donation value of the charity that recieved the highest number of player donations. If there is a tie between charities with the highest donations, the VRF and keepers will settle the tie and declare the winner.

Linting

To check linting / code formatting:

yarn lint

or, to fix:

yarn lint:fix

Link: https://github.com/smartcontractkit/smart-contract-examples/tree/main/lottery

#smartcontract #blockchain #oracle #chainlink #hardhat #javascript

What is GEEK

Buddha Community

How to Build & Deloy Lottery Smart Contract with LINK using Hardhat

Chloe Butler

1667425440

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

Design the PCB using your favorite CAD or drawing software.
Print the top and bottom copper and top silk screen layers to a PDF file.
Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
Use a Gerber viewer to double-check the output against the original PCB design.
Make adjustments as needed.
Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.

pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl

david harper

1610429951

Hire Smart Contract Developers | Smart Contract Development Company India

What are smart contracts?

Smart contracts is a digital code stored in a blockchain and automatically executes when predetermined terms and conditions are met. In Simple terms, they are programs that run by the setup of the people who developed them.They are designed to facilitate, verify, and execute a digital contract between two parties without the involvement of third parties.

Benefits of Smart Contracts

Greater efficiency and speed
Accuracy and transparency
Trust
Robust Security
Independent verification
Advanced data safety
Distributed ledger
Ease of use
Open source technology
Better flexibility
Easy integration
Improved tractability

Where could smart contracts be used?

Today Smart contracts are used in various platforms such as supply-chain management,cross-border financial transactions,document management,enforceability and more. Here are the Sectors where smart contracts plays a huge role ,

Supply chain management
Insurance
Mortgage loans
Financial industry
Trade Finance
Government
IT Sector
Records
Property ownership
Medical Research
Voting
Peer-to-Peer transactions
Product development
Stocktaking

Steps For Successful Smart Contract Development

There are a few Important things that you need to consider before you develop a Smart Contract,

Ask Yourself -

Do You Need A Smart Contract In Your Project?
How can i Implement Smart Contract in My Business?
If yes, Find out Your Business Requirements
Plan your Requirements
Find a Trustworthy Smart Contract Developer
Develop , Test Your Smart Contract

Ready to develop your smart contract?

I hope this blog was helpful. We think this is the right time for companies to invest in building a blockchain powered Smart Contracts as Blockchain technology and the ecosystem around it is changing fast. If you’re thinking about building a Smart Contract but not sure where to start, contact us, we’re happy to provide free suggestions about how blockchain’s Smart Contracts may fit into your business.

We Employcoder Leading IT Outsourcing Company with a team of Smart Contract Experts. Hire Smart Contract Developers from us who can code bug-free, scalable, innovative, fully-functional smart contracts for your business and make your business or enterprise eye-catchy & trutworthy among the people in the digital globe.

#hire smart contract developers #smart contract developer #smart contract development #smart contract development services, #smart contract development company, #smart contract programmers

Codezeros Technology

1607516513

Smart Contract Development Company in Washington

We (Codezeros) are Smart Contract Development Company in Washington. We provide the complete solution for smart contracts like smart contract architecture, design & development, auditing & optimization. We have experienced developers who are expert in developing smart contracts as well as DApp development, pitch deck development, and many other services related to Blockchain Technology.

#smart contract creation #smart contract company #blockchain smart contract #smart contract development #smart contract service provider #smart contract development company

james right

1606811633

Smart Contract Development Company, Hire Smart Contract Developer

With the advent of smart contracts, it has become possible for every business to secure its data and to determine success. It is a decentralized solution that enables you to do many tasks while executing in the most optimal manner. All the entrepreneurs and business owners who have adopted this mechanism have received great results. In order to access this service for your company, you need to team up with a smart contract development company. By doing this, you enhance the power of your solution and make things very seamless.

Smart Contract Development Company

What makes a smart contract a perfect solution for my business?

A smart contract enables you to achieve various feats that seem unfathomable. Also, you get to protect the information of your enterprise in the best possible manner. When you have the power to expand your operation, you should be wise enough to choose the most appropriate solution. There are times when you have to think of something exemplary, it also gives you more about the perfection of the tools. At such a time, you need to have a proper understanding of the features and get things planned in a permanent fashion.

It does not matter which domain you are related to, you get to think about the possible solutions from every domain. Also, you get to manage various other tasks that seem very difficult otherwise. Before you introduce this ledger-based framework in your firm, you need to ready for the outcomes. Every time you come across a decentralized network, you start to pave way for something more dynamic. This gives you the power to react on time and with more efficacy for the long term. Also, you get to review the overall working with a set of proficient developers.

Whether you directly connect with the blockchain or not, your business draws a large number of benefits from the smart contracts. The very core of this solution enables you to create a fitting structure around every company. Also, you get to come with a prominent fix that empowers the proponents of your project. The vision of your investors gets broadened and you get the insights to envision things properly. Every time you do it, you get things worked up properly, you get to maintain a proper flux of funds. In this way, your business gets whatever you want in a very short duration.

How should I develop and implement smart contracts in my business?

By introducing this solution, you prepare your startup to scale up the steps of success. Also, it helps your business overcome all types of issues whether they are temporary in nature or permanent. You need to understand the predilection of every course of action so there is never any obstacle in the way. Moreover, it becomes very easy for your organization to spread its wings because it has befitting tools to support its working. This may also happen in with support structures that ease the expansion of business in a very lesser time.

In every industry, there is a scope of decentralization and you can make it even easier through a string of services. All the crypto-based programs help you get closer to the customers with a reliable method of payment. With this structure, it is possible for every business to do something exceptional. Whether you want it or not, you get to work on many expeditionary campaigns. Also, you help others expand the work and things can get more explicable flawlessly. The working of this solution gives you a high quantum of accuracy in every possible manner.

The prospects of your company can get much better and promising because you have a lesser number of agents deployed. You might find these differences odd, but they can highly impact the development as well as transactions. When you want to touch base with your team or some consultants, you get a better idea about the entire thing. Also, that happens without having you wasting your time. There could be subtle errors in the initial phases of the development of tokens or any other distributed ledger. If decentralization is at the core, you need to have more potential to conceptualize new methods.

How should I find professionals who could develop custom-built smart contracts?

You can certainly get such experts but the search has to be very thorough in nature. Also, the whole thing has to be planned to the hilt and things could be working seamlessly. When you get things working at an impressive pace, you might lack clear objects. Even if there is a projected solution for some problems, you must not employ them before proper rounds of review. This approach gives you satisfactory results in every domain and keeps you one step ahead when it comes to getting what you precisely need.

It is vital that you work with people who have an idea about what’s happening in your firm. By working with such people, you get more certainty in every step sans wasting a large quantum of resources or time. You might be able to find some other options but they all resort to decentralization in the end. The best way to implement this solution is to give more time to every single process through many methods. Also, you need to get things aligned with a proper solution and help the developers give shape to their visions.

Upshot

With the experts of Coin Developer India, it is possible for every startup to get a bespoke smart contract. We make this solution so adaptable that you don’t think about making any changes in the existing structure of the business. Our seasoned professionals help you get over all the problems that you might face in the planning or the execution stage. We make every single task absolutely flawless and help you get familiar with pragmatic fixes that are cost-effective too. If you want to make the most of this blockchain-based service, you must work with us.

Want an efficient smart contract for your business? Associate with us!

Contact Details:
Call and Whatsapp : +91-7014607737
Email: cryptodeveloperjaipur@gmail.com
Telegram : @vipinshar

#smart contract development company #smart contract #mlm smart contract #mlm #smart contract development #hire smart contract developer

Amara Sophi

1595917383

Top Smart Contract MLM Clone Scripts

Smart Contract MLM Software is a smart contract-based MLM platform, built on blockchain technology that helps you to build trustworthy blockchain MLM business with fully decentralized Ethereum SmartContract.The smart contract MLM has embedded with various working features of MLM Responsive Website, Member Back office, admin back office, secured cloud server, anti-DDOS protection, and SSL.

Benefits of Smart Contracts based MLM Platform

They are reliable since once programmed they cannot be reversed.
They are cost-effective since there will be no more transactional costs and the use of a huge amount of papers.
They are efficient since their processing speed is much higher than a traditional contract. They automatically enforce whatever is defined.
They are automatic and require no third party involvement.

Having an idea to start MLM business with smart contract development??

Coinjoker offers high end MLM software along with fresh business models, highly responsive and attractive UI/UX, and targeted MLM leads. This Smart contract-based MLM software is integrated with latest lead generating features to generate your passive income.

Some of the Smart Contract MLM Clone Scripts,

Million Money Clone Script

Millionmoney is a networking program that is built on blockchain technology and ethereum cryptocurrency as p2p donation among members. Million Money occurs to be a pyramid scheme, that is you have to pay a fee to join the scheme, and then you have to refer other people to that scheme. The only possible way to make a positive return on your original joining fee is to convince enough people to join after you. You will receive a small portion of the fees from any members who you recruit, while the rest of your fees get passed to higher levels of the pyramid.

Forsage Clone Script

Forsage, found at forsage.io, is a MLM or multi-level marketing company that claims to have created the world’s first 100% decentralized Ethereum smart contract.Forsage ethereum smart contract "enables peer-to-peer (P2P) commission payments between its program participants.” Forsage is Ethereum Blockchain Matrix Project, this smart contract is supposed to offer any participants “the ability to directly engage in personal and business transactions.

Doubleway Clone Script

Doubleway Multi-level marketing (MLM) is one of the most popular and easy way to make money online and other than the health and wellness niche, cryptocurrency seems to be one of the most-talked-about opportunities to start various mlm business in the wider globe space. Doubleway uses an MLM structured business model you can recruit new people to join doubleway through your affiliate link and build a downline team to earn commissions with the company.

Etrix Clone Script

Etrix is a First Smart Contract With Binary open MLM structure With Two Matrixes. It has Forced Matrix and Team Matrix. Both Team and Company Forced Matrixes are working simultaneously. Etrix is noted for the fastest and easiest way to earn ethereum for every 90 days. People are using this smart contract to give donations and receive donations in form of Ethereum.

XOXO Network Clone Script

XOXO Network is a decentralized, peer to peer global powerline networking system that runs on set protocols with no admin or official authority. This Ethereum smart contract-based system requires members to choose between different smart contract projects that could potentially yield profits. XOXO Network is nothing but a crypto-based cash gifting matrix cycler program. The Network uses Ethereum as the only method of payment that is member to member. Thus XOXO is the first-ever powerline network built on a smart contract, it protocols it’s unshakable and unstoppable to work and serve everyone equally.

You can launch the above mentioned smart contract-based MLM Clone scripts like Million Money, Forsage, Etrix, Doubleway, XOXO network within a week!!

Get Free Demo for Crypto MLM Clone Scripts>> https://www.cryptoexchangescript.com/contact-us

or contact through

Whatsapp ->> +91 9791703519

Skype->> live:support_60864

Telegram->> https://t.me/Coin_Joker

#smart contract based mlm clone #smart contract mlm clone script #smart contract based mlm clone script #smart contract mlm clone development #ethereum smart contract mlm clone script