How to create a registration form using Angular 8 and Kendo UI

Originally published by Jason Watmore at https://www.telerik.com/

Note: This example was built with Angular 8.1.0

This is a quick example of how to set up form validation in Angular 8 with Kendo UI components and Reactive Forms. The example is a simple registration form with pretty standard fields for title, first name, last name, email, password, confirm password and an accept Ts & Cs switch control. All fields are required, including the switch control. The email field must be a valid email address and the password field must have a mininimum length of 6 characters. There’s also a custom validator called MustMatch, which is used to validate that the password and confirm password fields match.

I’ve set up the form validation messages to display when the user attempts to submit the form. This is implemented with a submitted property in the app component that is set to true when the form is submitted, and reset to false if the cancel button is clicked.

The following Kendo UI components are used in the form:

• kendo-dropdownlist is used for the Title field
• kendoTextBox is used for the First Name, Last Name and Email fields
• kendoTextBox with type="password" is used for the Password and Confirm Password fields
• kendo-switch is used for the Accept Ts & Cs field
• kendoButton is used for the Register and Cancel buttons

Styling of the example is done with Bootstrap 4.3, the Kendo UI for Angular Default Theme, and a few custom CSS styles in the main index.html file.

Here it is in action:https://stackblitz.com/edit/angular-8-kendo-ui-reactive-form-validation

Angular + Kendo UI App Component

The app component defines the form fields and validators for our registration form using an Angular FormBuilder to create an instance of a FormGroup that is stored in the registerForm property. The registerForm is then bound to the form in the app template below using the [formGroup] directive.

The titles array is bound to the kendo-dropdownlist in the app component template with the [data]="titles" property.

I also added a getter f as a convenience property to make it easier to access form controls from the template. So for example you can access the confirmPassword field in the template using f.confirmPassword instead of registerForm.controls.confirmPassword.

import { Component, OnInit } from '@angular/core';
import { FormBuilder, FormGroup, Validators } from ‘@angular/forms’;
 
// import custom validator to validate that password and confirm password fields match
import { MustMatch } from ‘./_helpers/must-match.validator’;
 
@Component({ selector: ‘app’, templateUrl: ‘app.component.html’ })
export class AppComponent implements OnInit {
    registerForm: FormGroup;
    submitted = false;
    titles = [‘Mr’, ‘Mrs’, ‘Miss’, ‘Ms’];
 
    constructor(private formBuilder: FormBuilder) { }
 
    ngOnInit() {
        this.registerForm = this.formBuilder.group({
            title: [‘’, Validators.required],
            firstName: [‘’, Validators.required],
            lastName: [‘’, Validators.required],
            email: [‘’, [Validators.required, Validators.email]],
            password: [‘’, [Validators.required, Validators.minLength(6)]],
            confirmPassword: [‘’, Validators.required],
            acceptTerms: [false, Validators.requiredTrue]
        }, {
            validator: MustMatch(‘password’, ‘confirmPassword’)
        });
    }
 
    // convenience getter for easy access to form fields
    get f() { return this.registerForm.controls; }
 
    onSubmit() {
        this.submitted = true;
 
        // stop here if form is invalid
        if (this.registerForm.invalid) {
            return;
        }
 
        // display form values on success
        alert(‘SUCCESS!! :-)\n\n’ + JSON.stringify(this.registerForm.value, null, 4));
    }
 
    onReset() {
        this.submitted = false;
        this.registerForm.reset();
    }
}

Angular + Kendo UI App Component Template

The app component template contains all the HTML markup and Angular template syntax for displaying the example registration form in your browser. The form element uses the [formGroup] directive to bind to the registerForm FormGroup in the app component above.

The form binds the form submit event to the onSubmit() handler in the app component using the Angular event binding (ngSubmit)=“onSubmit()”. Validation messages are displayed only after the user attempts to submit the form for the first time; this is controlled with the submitted property of the app component.

The cancel button click event is bound to the onReset() handler in the app component using the Angular event binding (click)=“onReset()”.

<!-- main app container -->

<div class=“card m-3”>

    <h5 class=“card-header”>Angular 8 + Kendo UI - Reactive Form Validation</h5>

    <div class=“card-body”>

        <form [formGroup]=“registerForm” (ngSubmit)=“onSubmit()”>

            <div class=“form-row”>

                <div class=“form-group col”>

                    <label>Title</label>

                    <kendo-dropdownlist formControlName=“title” [data]=“titles” class=“form-control” [ngClass]=“{ ‘ng-invalid ng-touched’: submitted && f.title.errors }”>

                    </kendo-dropdownlist>

                    <div *ngIf=“submitted && f.title.errors” class=“k-tooltip-validation”>

                        <div *ngIf=“f.title.errors.required”>Title is required</div>

                    </div>

                </div>

                <div class=“form-group col-5”>

                    <label>First Name</label>

                    <input kendoTextBox formControlName=“firstName” class=“form-control” [ngClass]=“{ ‘ng-invalid ng-touched’: submitted && f.firstName.errors }” />

                    <div *ngIf=“submitted && f.firstName.errors” class=“k-tooltip-validation”>

                        <div *ngIf=“f.firstName.errors.required”>First Name is required</div>

                    </div>

                </div>

                <div class=“form-group col-5”>

                    <label>Last Name</label>

                    <input kendoTextBox formControlName=“lastName” class=“form-control” [ngClass]=“{ ‘ng-invalid ng-touched’: submitted && f.lastName.errors }” />

                    <div *ngIf=“submitted && f.lastName.errors” class=“k-tooltip-validation”>

                        <div *ngIf=“f.lastName.errors.required”>Last Name is required</div>

                    </div>

                </div>

            </div>

            <div class=“form-group”>

                <label>Email</label>

                <input kendoTextBox formControlName=“email” class=“form-control” [ngClass]=“{ ‘ng-invalid ng-touched’: submitted && f.email.errors }” />

                <div *ngIf=“submitted && f.email.errors” class=“k-tooltip-validation”>

                    <div *ngIf=“f.email.errors.required”>Email is required</div>

                    <div *ngIf=“f.email.errors.email”>Email must be a valid email address</div>

                </div>

            </div>

            <div class=“form-row”>

                <div class=“form-group col”>

                    <label>Password</label>

                    <input kendoTextBox type=“password” formControlName=“password” class=“form-control” [ngClass]=“{ ‘ng-invalid ng-touched’: submitted && f.password.errors }” />

                    <div *ngIf=“submitted && f.password.errors” class=“k-tooltip-validation”>

                        <div *ngIf=“f.password.errors.required”>Password is required</div>

                        <div *ngIf=“f.password.errors.minlength”>Password must be at least 6 characters</div>

                    </div>

                </div>

                <div class=“form-group col”>

                    <label>Confirm Password</label>

                    <input kendoTextBox type=“password” formControlName=“confirmPassword” class=“form-control” [ngClass]=“{ ‘ng-invalid ng-touched’: submitted && f.confirmPassword.errors }” />

                    <div *ngIf=“submitted && f.confirmPassword.errors” class=“k-tooltip-validation”>

                        <div *ngIf=“f.confirmPassword.errors.required”>Confirm Password is required</div>

                        <div *ngIf=“f.confirmPassword.errors.mustMatch”>Passwords must match</div>

                    </div>

                </div>

            </div>

            <div class=“form-group”>

                <kendo-switch formControlName=“acceptTerms” onLabel=“Yes”

         offLabel=“No”></kendo-switch>

                <label>Accept Terms & Conditions</label>

                <div *ngIf=“submitted && f.acceptTerms.errors” class=“k-tooltip-validation”>Accept Ts & Cs is required</div>

            </div>

            <div class=“text-center”>

                <button kendoButton primary=“true” class=“mr-2”>Register</button>

                <button kendoButton type=“reset” (click)=“onReset()”>Cancel</button>

            </div>

        </form>

    </div>

</div>

Reactive Forms Custom “Must Match” Validator

The custom MustMatch validator is used in this example to verify that both of the password fields (password and confirmPassword) match. It could also be used to verify that any pair of fields match (e.g. email and confirm email fields).

It works slightly differently than a typical custom validator because I’m setting the error on the second field instead of returning it to be set on the formGroup. I did it this way because I think it makes the template a bit cleaner and more intuitive. The mustMatch validation error is displayed below the confirmPassword field, so I think it makes sense that the error is attached the the confirmPassword form control.

import { FormGroup } from ‘@angular/forms’;

 

// custom validator to check that two fields match

export function MustMatch(controlName: string, matchingControlName: string) {

    return (formGroup: FormGroup) => {

        const control = formGroup.controls[controlName];

        const matchingControl = formGroup.controls[matchingControlName];

 

        if (matchingControl.errors && !matchingControl.errors.mustMatch) {

            // return if another validator has already found an error on the matchingControl

            return;

        }

 

        // set error on matchingControl if validation fails

        if (control.value !== matchingControl.value) {

            matchingControl.setErrors({ mustMatch: true });

        } else {

            matchingControl.setErrors(null);

        }

    }

}

Angular + Kendo UI App Module

There isn’t much going on in the app module other than the standard stuff. The main thing you need to remember for using reactive forms in Angular is to import the ReactiveFormsModule from ‘@angular/forms’ and include it in the imports array of the @NgModule decorator.

To use Kendo UI components for Angular, import the modules that contain the components you want to use and include them in the imports array of the @NgModule decorator. The example uses Kendo UI components from the InputsModule, DropDownsModule and ButtonsModule.

import { NgModule } from ‘@angular/core’;

import { BrowserModule } from ‘@angular/platform-browser’;

import { ReactiveFormsModule } from ‘@angular/forms’;

import { BrowserAnimationsModule } from ‘@angular/platform-browser/animations’;

 

import { InputsModule } from ‘@progress/kendo-angular-inputs’;

import { DropDownsModule } from ‘@progress/kendo-angular-dropdowns’;

import { ButtonsModule } from ‘@progress/kendo-angular-buttons’;

 

import { AppComponent } from ‘./app.component’;

 

@NgModule({

    imports: [

        BrowserModule,

        ReactiveFormsModule,

        BrowserAnimationsModule,

        InputsModule,

        DropDownsModule,

        ButtonsModule

    ],

    declarations: [

        AppComponent

    ],

    bootstrap: [AppComponent]

})

export class AppModule { }

Thanks for reading ❤

If you liked this post, share it with all of your programming buddies!

Follow us on Facebook | Twitter

Further reading about Angular

☞ Angular 8 (formerly Angular 2) - The Complete Guide

☞ Angular & NodeJS - The MEAN Stack Guide

☞ The Complete Node.js Developer Course (3rd Edition)

☞ The Web Developer Bootcamp

☞ Best 50 Angular Interview Questions for Frontend Developers in 2019

☞ How to build a CRUD Web App with Angular 8.0

☞ React vs Angular: An In-depth Comparison

☞ React vs Angular vs Vue.js by Example

☞ Microfrontends — Connecting JavaScript frameworks together (React, Angular, Vue etc)

☞ Building CRUD Mobile App using Ionic 4, Angular 8

#angular #web-development #javascript #forms

What is GEEK

Buddha Community

PyTumblr: A Python Tumblr API v2 Client

PyTumblr

Installation

Install via pip:

$ pip install pytumblr

Install from source:

$ git clone https://github.com/tumblr/pytumblr.git
$ cd pytumblr
$ python setup.py install

Usage

Create a client

A pytumblr.TumblrRestClient is the object you'll make all of your calls to the Tumblr API through. Creating one is this easy:

client = pytumblr.TumblrRestClient(
    '<consumer_key>',
    '<consumer_secret>',
    '<oauth_token>',
    '<oauth_secret>',
)

client.info() # Grabs the current user information

Two easy ways to get your credentials to are:

1. The built-in interactive_console.py tool (if you already have a consumer key & secret)
2. The Tumblr API console at https://api.tumblr.com/console
3. Get sample login code at https://api.tumblr.com/console/calls/user/info

Supported Methods

User Methods

client.info() # get information about the authenticating user
client.dashboard() # get the dashboard for the authenticating user
client.likes() # get the likes for the authenticating user
client.following() # get the blogs followed by the authenticating user

client.follow('codingjester.tumblr.com') # follow a blog
client.unfollow('codingjester.tumblr.com') # unfollow a blog

client.like(id, reblogkey) # like a post
client.unlike(id, reblogkey) # unlike a post

Blog Methods

client.blog_info(blogName) # get information about a blog
client.posts(blogName, **params) # get posts for a blog
client.avatar(blogName) # get the avatar for a blog
client.blog_likes(blogName) # get the likes on a blog
client.followers(blogName) # get the followers of a blog
client.blog_following(blogName) # get the publicly exposed blogs that [blogName] follows
client.queue(blogName) # get the queue for a given blog
client.submission(blogName) # get the submissions for a given blog

Post Methods

Creating posts

PyTumblr lets you create all of the various types that Tumblr supports. When using these types there are a few defaults that are able to be used with any post type.

The default supported types are described below.

• state - a string, the state of the post. Supported types are published, draft, queue, private
• tags - a list, a list of strings that you want tagged on the post. eg: ["testing", "magic", "1"]
• tweet - a string, the string of the customized tweet you want. eg: "Man I love my mega awesome post!"
• date - a string, the customized GMT that you want
• format - a string, the format that your post is in. Support types are html or markdown
• slug - a string, the slug for the url of the post you want

We'll show examples throughout of these default examples while showcasing all the specific post types.

Creating a photo post

Creating a photo post supports a bunch of different options plus the described default options * caption - a string, the user supplied caption * link - a string, the "click-through" url for the photo * source - a string, the url for the photo you want to use (use this or the data parameter) * data - a list or string, a list of filepaths or a single file path for multipart file upload

#Creates a photo post using a source URL
client.create_photo(blogName, state="published", tags=["testing", "ok"],
                    source="https://68.media.tumblr.com/b965fbb2e501610a29d80ffb6fb3e1ad/tumblr_n55vdeTse11rn1906o1_500.jpg")

#Creates a photo post using a local filepath
client.create_photo(blogName, state="queue", tags=["testing", "ok"],
                    tweet="Woah this is an incredible sweet post [URL]",
                    data="/Users/johnb/path/to/my/image.jpg")

#Creates a photoset post using several local filepaths
client.create_photo(blogName, state="draft", tags=["jb is cool"], format="markdown",
                    data=["/Users/johnb/path/to/my/image.jpg", "/Users/johnb/Pictures/kittens.jpg"],
                    caption="## Mega sweet kittens")

Creating a text post

Creating a text post supports the same options as default and just a two other parameters * title - a string, the optional title for the post. Supports markdown or html * body - a string, the body of the of the post. Supports markdown or html

#Creating a text post
client.create_text(blogName, state="published", slug="testing-text-posts", title="Testing", body="testing1 2 3 4")

Creating a quote post

Creating a quote post supports the same options as default and two other parameter * quote - a string, the full text of the qote. Supports markdown or html * source - a string, the cited source. HTML supported

#Creating a quote post
client.create_quote(blogName, state="queue", quote="I am the Walrus", source="Ringo")

Creating a link post

• title - a string, the title of post that you want. Supports HTML entities.
• url - a string, the url that you want to create a link post for.
• description - a string, the desciption of the link that you have

#Create a link post
client.create_link(blogName, title="I like to search things, you should too.", url="https://duckduckgo.com",
                   description="Search is pretty cool when a duck does it.")

Creating a chat post

Creating a chat post supports the same options as default and two other parameters * title - a string, the title of the chat post * conversation - a string, the text of the conversation/chat, with diablog labels (no html)

#Create a chat post
chat = """John: Testing can be fun!
Renee: Testing is tedious and so are you.
John: Aw.
"""
client.create_chat(blogName, title="Renee just doesn't understand.", conversation=chat, tags=["renee", "testing"])

Creating an audio post

Creating an audio post allows for all default options and a has 3 other parameters. The only thing to keep in mind while dealing with audio posts is to make sure that you use the external_url parameter or data. You cannot use both at the same time. * caption - a string, the caption for your post * external_url - a string, the url of the site that hosts the audio file * data - a string, the filepath of the audio file you want to upload to Tumblr

#Creating an audio file
client.create_audio(blogName, caption="Rock out.", data="/Users/johnb/Music/my/new/sweet/album.mp3")

#lets use soundcloud!
client.create_audio(blogName, caption="Mega rock out.", external_url="https://soundcloud.com/skrillex/sets/recess")

Creating a video post

Creating a video post allows for all default options and has three other options. Like the other post types, it has some restrictions. You cannot use the embed and data parameters at the same time. * caption - a string, the caption for your post * embed - a string, the HTML embed code for the video * data - a string, the path of the file you want to upload

#Creating an upload from YouTube
client.create_video(blogName, caption="Jon Snow. Mega ridiculous sword.",
                    embed="http://www.youtube.com/watch?v=40pUYLacrj4")

#Creating a video post from local file
client.create_video(blogName, caption="testing", data="/Users/johnb/testing/ok/blah.mov")

Editing a post

Updating a post requires you knowing what type a post you're updating. You'll be able to supply to the post any of the options given above for updates.

client.edit_post(blogName, id=post_id, type="text", title="Updated")
client.edit_post(blogName, id=post_id, type="photo", data="/Users/johnb/mega/awesome.jpg")

Reblogging a Post

Reblogging a post just requires knowing the post id and the reblog key, which is supplied in the JSON of any post object.

client.reblog(blogName, id=125356, reblog_key="reblog_key")

Deleting a post

Deleting just requires that you own the post and have the post id

client.delete_post(blogName, 123456) # Deletes your post :(

A note on tags: When passing tags, as params, please pass them as a list (not a comma-separated string):

client.create_text(blogName, tags=['hello', 'world'], ...)

Getting notes for a post

In order to get the notes for a post, you need to have the post id and the blog that it is on.

data = client.notes(blogName, id='123456')

The results include a timestamp you can use to make future calls.

data = client.notes(blogName, id='123456', before_timestamp=data["_links"]["next"]["query_params"]["before_timestamp"])

Tagged Methods

# get posts with a given tag
client.tagged(tag, **params)

Using the interactive console

This client comes with a nice interactive console to run you through the OAuth process, grab your tokens (and store them for future use).

You'll need pyyaml installed to run it, but then it's just:

$ python interactive-console.py

and away you go! Tokens are stored in ~/.tumblr and are also shared by other Tumblr API clients like the Ruby client.

Running tests

The tests (and coverage reports) are run with nose, like this:

python setup.py test

Author: tumblr
Source Code: https://github.com/tumblr/pytumblr
License: Apache-2.0 license

#python #api 

Pdf2gerb: Perl Script Converts PDF Files to Gerber format

pdf2gerb

Perl script converts PDF files to Gerber format

Pdf2Gerb generates Gerber 274X photoplotting and Excellon drill files from PDFs of a PCB. Up to three PDFs are used: the top copper layer, the bottom copper layer (for 2-sided PCBs), and an optional silk screen layer. The PDFs can be created directly from any PDF drawing software, or a PDF print driver can be used to capture the Print output if the drawing software does not directly support output to PDF.

The general workflow is as follows:

1. Design the PCB using your favorite CAD or drawing software.
2. Print the top and bottom copper and top silk screen layers to a PDF file.
3. Run Pdf2Gerb on the PDFs to create Gerber and Excellon files.
4. Use a Gerber viewer to double-check the output against the original PCB design.
5. Make adjustments as needed.
6. Submit the files to a PCB manufacturer.

Please note that Pdf2Gerb does NOT perform DRC (Design Rule Checks), as these will vary according to individual PCB manufacturer conventions and capabilities. Also note that Pdf2Gerb is not perfect, so the output files must always be checked before submitting them. As of version 1.6, Pdf2Gerb supports most PCB elements, such as round and square pads, round holes, traces, SMD pads, ground planes, no-fill areas, and panelization. However, because it interprets the graphical output of a Print function, there are limitations in what it can recognize (or there may be bugs).

See docs/Pdf2Gerb.pdf for install/setup, config, usage, and other info.

pdf2gerb_cfg.pm

#Pdf2Gerb config settings:
#Put this file in same folder/directory as pdf2gerb.pl itself (global settings),
#or copy to another folder/directory with PDFs if you want PCB-specific settings.
#There is only one user of this file, so we don't need a custom package or namespace.
#NOTE: all constants defined in here will be added to main namespace.
#package pdf2gerb_cfg;

use strict; #trap undef vars (easier debug)
use warnings; #other useful info (easier debug)


##############################################################################################
#configurable settings:
#change values here instead of in main pfg2gerb.pl file

use constant WANT_COLORS => ($^O !~ m/Win/); #ANSI colors no worky on Windows? this must be set < first DebugPrint() call

#just a little warning; set realistic expectations:
#DebugPrint("${\(CYAN)}Pdf2Gerb.pl ${\(VERSION)}, $^O O/S\n${\(YELLOW)}${\(BOLD)}${\(ITALIC)}This is EXPERIMENTAL software.  \nGerber files MAY CONTAIN ERRORS.  Please CHECK them before fabrication!${\(RESET)}", 0); #if WANT_DEBUG

use constant METRIC => FALSE; #set to TRUE for metric units (only affect final numbers in output files, not internal arithmetic)
use constant APERTURE_LIMIT => 0; #34; #max #apertures to use; generate warnings if too many apertures are used (0 to not check)
use constant DRILL_FMT => '2.4'; #'2.3'; #'2.4' is the default for PCB fab; change to '2.3' for CNC

use constant WANT_DEBUG => 0; #10; #level of debug wanted; higher == more, lower == less, 0 == none
use constant GERBER_DEBUG => 0; #level of debug to include in Gerber file; DON'T USE FOR FABRICATION
use constant WANT_STREAMS => FALSE; #TRUE; #save decompressed streams to files (for debug)
use constant WANT_ALLINPUT => FALSE; #TRUE; #save entire input stream (for debug ONLY)

#DebugPrint(sprintf("${\(CYAN)}DEBUG: stdout %d, gerber %d, want streams? %d, all input? %d, O/S: $^O, Perl: $]${\(RESET)}\n", WANT_DEBUG, GERBER_DEBUG, WANT_STREAMS, WANT_ALLINPUT), 1);
#DebugPrint(sprintf("max int = %d, min int = %d\n", MAXINT, MININT), 1); 

#define standard trace and pad sizes to reduce scaling or PDF rendering errors:
#This avoids weird aperture settings and replaces them with more standardized values.
#(I'm not sure how photoplotters handle strange sizes).
#Fewer choices here gives more accurate mapping in the final Gerber files.
#units are in inches
use constant TOOL_SIZES => #add more as desired
(
#round or square pads (> 0) and drills (< 0):
    .010, -.001,  #tiny pads for SMD; dummy drill size (too small for practical use, but needed so StandardTool will use this entry)
    .031, -.014,  #used for vias
    .041, -.020,  #smallest non-filled plated hole
    .051, -.025,
    .056, -.029,  #useful for IC pins
    .070, -.033,
    .075, -.040,  #heavier leads
#    .090, -.043,  #NOTE: 600 dpi is not high enough resolution to reliably distinguish between .043" and .046", so choose 1 of the 2 here
    .100, -.046,
    .115, -.052,
    .130, -.061,
    .140, -.067,
    .150, -.079,
    .175, -.088,
    .190, -.093,
    .200, -.100,
    .220, -.110,
    .160, -.125,  #useful for mounting holes
#some additional pad sizes without holes (repeat a previous hole size if you just want the pad size):
    .090, -.040,  #want a .090 pad option, but use dummy hole size
    .065, -.040, #.065 x .065 rect pad
    .035, -.040, #.035 x .065 rect pad
#traces:
    .001,  #too thin for real traces; use only for board outlines
    .006,  #minimum real trace width; mainly used for text
    .008,  #mainly used for mid-sized text, not traces
    .010,  #minimum recommended trace width for low-current signals
    .012,
    .015,  #moderate low-voltage current
    .020,  #heavier trace for power, ground (even if a lighter one is adequate)
    .025,
    .030,  #heavy-current traces; be careful with these ones!
    .040,
    .050,
    .060,
    .080,
    .100,
    .120,
);
#Areas larger than the values below will be filled with parallel lines:
#This cuts down on the number of aperture sizes used.
#Set to 0 to always use an aperture or drill, regardless of size.
use constant { MAX_APERTURE => max((TOOL_SIZES)) + .004, MAX_DRILL => -min((TOOL_SIZES)) + .004 }; #max aperture and drill sizes (plus a little tolerance)
#DebugPrint(sprintf("using %d standard tool sizes: %s, max aper %.3f, max drill %.3f\n", scalar((TOOL_SIZES)), join(", ", (TOOL_SIZES)), MAX_APERTURE, MAX_DRILL), 1);

#NOTE: Compare the PDF to the original CAD file to check the accuracy of the PDF rendering and parsing!
#for example, the CAD software I used generated the following circles for holes:
#CAD hole size:   parsed PDF diameter:      error:
#  .014                .016                +.002
#  .020                .02267              +.00267
#  .025                .026                +.001
#  .029                .03167              +.00267
#  .033                .036                +.003
#  .040                .04267              +.00267
#This was usually ~ .002" - .003" too big compared to the hole as displayed in the CAD software.
#To compensate for PDF rendering errors (either during CAD Print function or PDF parsing logic), adjust the values below as needed.
#units are pixels; for example, a value of 2.4 at 600 dpi = .0004 inch, 2 at 600 dpi = .0033"
use constant
{
    HOLE_ADJUST => -0.004 * 600, #-2.6, #holes seemed to be slightly oversized (by .002" - .004"), so shrink them a little
    RNDPAD_ADJUST => -0.003 * 600, #-2, #-2.4, #round pads seemed to be slightly oversized, so shrink them a little
    SQRPAD_ADJUST => +0.001 * 600, #+.5, #square pads are sometimes too small by .00067, so bump them up a little
    RECTPAD_ADJUST => 0, #(pixels) rectangular pads seem to be okay? (not tested much)
    TRACE_ADJUST => 0, #(pixels) traces seemed to be okay?
    REDUCE_TOLERANCE => .001, #(inches) allow this much variation when reducing circles and rects
};

#Also, my CAD's Print function or the PDF print driver I used was a little off for circles, so define some additional adjustment values here:
#Values are added to X/Y coordinates; units are pixels; for example, a value of 1 at 600 dpi would be ~= .002 inch
use constant
{
    CIRCLE_ADJUST_MINX => 0,
    CIRCLE_ADJUST_MINY => -0.001 * 600, #-1, #circles were a little too high, so nudge them a little lower
    CIRCLE_ADJUST_MAXX => +0.001 * 600, #+1, #circles were a little too far to the left, so nudge them a little to the right
    CIRCLE_ADJUST_MAXY => 0,
    SUBST_CIRCLE_CLIPRECT => FALSE, #generate circle and substitute for clip rects (to compensate for the way some CAD software draws circles)
    WANT_CLIPRECT => TRUE, #FALSE, #AI doesn't need clip rect at all? should be on normally?
    RECT_COMPLETION => FALSE, #TRUE, #fill in 4th side of rect when 3 sides found
};

#allow .012 clearance around pads for solder mask:
#This value effectively adjusts pad sizes in the TOOL_SIZES list above (only for solder mask layers).
use constant SOLDER_MARGIN => +.012; #units are inches

#line join/cap styles:
use constant
{
    CAP_NONE => 0, #butt (none); line is exact length
    CAP_ROUND => 1, #round cap/join; line overhangs by a semi-circle at either end
    CAP_SQUARE => 2, #square cap/join; line overhangs by a half square on either end
    CAP_OVERRIDE => FALSE, #cap style overrides drawing logic
};
    
#number of elements in each shape type:
use constant
{
    RECT_SHAPELEN => 6, #x0, y0, x1, y1, count, "rect" (start, end corners)
    LINE_SHAPELEN => 6, #x0, y0, x1, y1, count, "line" (line seg)
    CURVE_SHAPELEN => 10, #xstart, ystart, x0, y0, x1, y1, xend, yend, count, "curve" (bezier 2 points)
    CIRCLE_SHAPELEN => 5, #x, y, 5, count, "circle" (center + radius)
};
#const my %SHAPELEN =
#Readonly my %SHAPELEN =>
our %SHAPELEN =
(
    rect => RECT_SHAPELEN,
    line => LINE_SHAPELEN,
    curve => CURVE_SHAPELEN,
    circle => CIRCLE_SHAPELEN,
);

#panelization:
#This will repeat the entire body the number of times indicated along the X or Y axes (files grow accordingly).
#Display elements that overhang PCB boundary can be squashed or left as-is (typically text or other silk screen markings).
#Set "overhangs" TRUE to allow overhangs, FALSE to truncate them.
#xpad and ypad allow margins to be added around outer edge of panelized PCB.
use constant PANELIZE => {'x' => 1, 'y' => 1, 'xpad' => 0, 'ypad' => 0, 'overhangs' => TRUE}; #number of times to repeat in X and Y directions

# Set this to 1 if you need TurboCAD support.
#$turboCAD = FALSE; #is this still needed as an option?

#CIRCAD pad generation uses an appropriate aperture, then moves it (stroke) "a little" - we use this to find pads and distinguish them from PCB holes. 
use constant PAD_STROKE => 0.3; #0.0005 * 600; #units are pixels
#convert very short traces to pads or holes:
use constant TRACE_MINLEN => .001; #units are inches
#use constant ALWAYS_XY => TRUE; #FALSE; #force XY even if X or Y doesn't change; NOTE: needs to be TRUE for all pads to show in FlatCAM and ViewPlot
use constant REMOVE_POLARITY => FALSE; #TRUE; #set to remove subtractive (negative) polarity; NOTE: must be FALSE for ground planes

#PDF uses "points", each point = 1/72 inch
#combined with a PDF scale factor of .12, this gives 600 dpi resolution (1/72 * .12 = 600 dpi)
use constant INCHES_PER_POINT => 1/72; #0.0138888889; #multiply point-size by this to get inches

# The precision used when computing a bezier curve. Higher numbers are more precise but slower (and generate larger files).
#$bezierPrecision = 100;
use constant BEZIER_PRECISION => 36; #100; #use const; reduced for faster rendering (mainly used for silk screen and thermal pads)

# Ground planes and silk screen or larger copper rectangles or circles are filled line-by-line using this resolution.
use constant FILL_WIDTH => .01; #fill at most 0.01 inch at a time

# The max number of characters to read into memory
use constant MAX_BYTES => 10 * M; #bumped up to 10 MB, use const

use constant DUP_DRILL1 => TRUE; #FALSE; #kludge: ViewPlot doesn't load drill files that are too small so duplicate first tool

my $runtime = time(); #Time::HiRes::gettimeofday(); #measure my execution time

print STDERR "Loaded config settings from '${\(__FILE__)}'.\n";
1; #last value must be truthful to indicate successful load


#############################################################################################
#junk/experiment:

#use Package::Constants;
#use Exporter qw(import); #https://perldoc.perl.org/Exporter.html

#my $caller = "pdf2gerb::";

#sub cfg
#{
#    my $proto = shift;
#    my $class = ref($proto) || $proto;
#    my $settings =
#    {
#        $WANT_DEBUG => 990, #10; #level of debug wanted; higher == more, lower == less, 0 == none
#    };
#    bless($settings, $class);
#    return $settings;
#}

#use constant HELLO => "hi there2"; #"main::HELLO" => "hi there";
#use constant GOODBYE => 14; #"main::GOODBYE" => 12;

#print STDERR "read cfg file\n";

#our @EXPORT_OK = Package::Constants->list(__PACKAGE__); #https://www.perlmonks.org/?node_id=1072691; NOTE: "_OK" skips short/common names

#print STDERR scalar(@EXPORT_OK) . " consts exported:\n";
#foreach(@EXPORT_OK) { print STDERR "$_\n"; }
#my $val = main::thing("xyz");
#print STDERR "caller gave me $val\n";
#foreach my $arg (@ARGV) { print STDERR "arg $arg\n"; }

Download Details:

Author: swannman
Source Code: https://github.com/swannman/pdf2gerb

License: GPL-3.0 license

#perl 

Laravel 8 Form Example Tutorial - Complete Guide

Laravel 8 form example. In this tutorial, i would love to show you how to create form in laravel. And how to insert data into database using form in laravel 8.

How to Submit Form Data into Database in Laravel 8

1. Step 1 – Install Laravel 8 Application
2. Step 2 – Configuring Database using Env File
3. Step 3 – Create Model & Migration File For Add Blog Post Form
4. Step 4 – Create Routes
5. Step 5 – Creating Controller
6. Step 6 – Create Blade File For Add Blog Post Form
7. Step 7 – Start Development Server
8. Step 8 – Run Laravel 8 Form App On Browser

https://laratutorials.com/laravel-8-form-example-tutorial/

#insert form data into database using laravel #laravel bootstrap form #laravel post forms #laravel 8 form tutorial #laravel 8 form example #laravel 8 form submit tutorial

Laravel 8 Form Validation Tutorial

Laravel 8 form validation example. In this tutorial, i will show you how to submit form with validation in laravel 8.

And you will learn how to store form data in laravel 8. Also validate form data before store to db.

How to Validate Form Data in Laravel 8

1. Step 1 – Install Laravel 8 Application
2. Step 2 – Configuring Database using Env File
3. Step 3 – Create Model & Migration File For Form
4. Step 4 – Create Routes
5. Step 5 – Creating Controller
6. Step 6 – Create Blade File For Form
7. Step 7 – Start Development Server
8. Step 8 – Run Laravel 8 Form Validation App On Browser

https://laratutorials.com/laravel-8-form-validation-example-tutorial/

#laravel 8 form validation #laravel 8 form validation tutorial #laravel 8 form validation - google search #how to validate form data in laravel 8 #form validation in laravel 8

Exploring Mutable and Immutable in Python

In this Python article, let's learn about Mutable and Immutable in Python. 

Mutable and Immutable in Python

Mutable is a fancy way of saying that the internal state of the object is changed/mutated. So, the simplest definition is: An object whose internal state can be changed is mutable. On the other hand, immutable doesn’t allow any change in the object once it has been created.

Both of these states are integral to Python data structure. If you want to become more knowledgeable in the entire Python Data Structure, take this free course which covers multiple data structures in Python including tuple data structure which is immutable. You will also receive a certificate on completion which is sure to add value to your portfolio.

Mutable Definition

Mutable is when something is changeable or has the ability to change. In Python, ‘mutable’ is the ability of objects to change their values. These are often the objects that store a collection of data.

Immutable Definition

Immutable is the when no change is possible over time. In Python, if the value of an object cannot be changed over time, then it is known as immutable. Once created, the value of these objects is permanent.

List of Mutable and Immutable objects

Objects of built-in type that are mutable are:

• Lists
• Sets
• Dictionaries
• User-Defined Classes (It purely depends upon the user to define the characteristics) 

Objects of built-in type that are immutable are:

• Numbers (Integer, Rational, Float, Decimal, Complex & Booleans)
• Strings
• Tuples
• Frozen Sets
• User-Defined Classes (It purely depends upon the user to define the characteristics)

Object mutability is one of the characteristics that makes Python a dynamically typed language. Though Mutable and Immutable in Python is a very basic concept, it can at times be a little confusing due to the intransitive nature of immutability.

Objects in Python

In Python, everything is treated as an object. Every object has these three attributes:

• Identity – This refers to the address that the object refers to in the computer’s memory.
• Type – This refers to the kind of object that is created. For example- integer, list, string etc. 
• Value – This refers to the value stored by the object. For example – List=[1,2,3] would hold the numbers 1,2 and 3

While ID and Type cannot be changed once it’s created, values can be changed for Mutable objects.

Check out this free python certificate course to get started with Python.

Mutable Objects in Python

I believe, rather than diving deep into the theory aspects of mutable and immutable in Python, a simple code would be the best way to depict what it means in Python. Hence, let us discuss the below code step-by-step:

#Creating a list which contains name of Indian cities  

cities = [‘Delhi’, ‘Mumbai’, ‘Kolkata’]

# Printing the elements from the list cities, separated by a comma & space

for city in cities:
		print(city, end=’, ’)

Output [1]: Delhi, Mumbai, Kolkata

#Printing the location of the object created in the memory address in hexadecimal format

print(hex(id(cities)))

Output [2]: 0x1691d7de8c8

#Adding a new city to the list cities

cities.append(‘Chennai’)

#Printing the elements from the list cities, separated by a comma & space 

for city in cities:
	print(city, end=’, ’)

Output [3]: Delhi, Mumbai, Kolkata, Chennai

#Printing the location of the object created in the memory address in hexadecimal format

print(hex(id(cities)))

Output [4]: 0x1691d7de8c8

The above example shows us that we were able to change the internal state of the object ‘cities’ by adding one more city ‘Chennai’ to it, yet, the memory address of the object did not change. This confirms that we did not create a new object, rather, the same object was changed or mutated. Hence, we can say that the object which is a type of list with reference variable name ‘cities’ is a MUTABLE OBJECT.

Let us now discuss the term IMMUTABLE. Considering that we understood what mutable stands for, it is obvious that the definition of immutable will have ‘NOT’ included in it. Here is the simplest definition of immutable– An object whose internal state can NOT be changed is IMMUTABLE.

Again, if you try and concentrate on different error messages, you have encountered, thrown by the respective IDE; you use you would be able to identify the immutable objects in Python. For instance, consider the below code & associated error message with it, while trying to change the value of a Tuple at index 0. 

#Creating a Tuple with variable name ‘foo’

foo = (1, 2)

#Changing the index[0] value from 1 to 3

foo[0] = 3
	
TypeError: 'tuple' object does not support item assignment 

Immutable Objects in Python

Once again, a simple code would be the best way to depict what immutable stands for. Hence, let us discuss the below code step-by-step:

#Creating a Tuple which contains English name of weekdays

weekdays = ‘Sunday’, ‘Monday’, ‘Tuesday’, ‘Wednesday’, ‘Thursday’, ‘Friday’, ‘Saturday’

# Printing the elements of tuple weekdays

print(weekdays)

Output [1]:  (‘Sunday’, ‘Monday’, ‘Tuesday’, ‘Wednesday’, ‘Thursday’, ‘Friday’, ‘Saturday’)

#Printing the location of the object created in the memory address in hexadecimal format

print(hex(id(weekdays)))

Output [2]: 0x1691cc35090

#tuples are immutable, so you cannot add new elements, hence, using merge of tuples with the # + operator to add a new imaginary day in the tuple ‘weekdays’

weekdays  +=  ‘Pythonday’,

#Printing the elements of tuple weekdays

print(weekdays)

Output [3]: (‘Sunday’, ‘Monday’, ‘Tuesday’, ‘Wednesday’, ‘Thursday’, ‘Friday’, ‘Saturday’, ‘Pythonday’)

#Printing the location of the object created in the memory address in hexadecimal format

print(hex(id(weekdays)))

Output [4]: 0x1691cc8ad68

This above example shows that we were able to use the same variable name that is referencing an object which is a type of tuple with seven elements in it. However, the ID or the memory location of the old & new tuple is not the same. We were not able to change the internal state of the object ‘weekdays’. The Python program manager created a new object in the memory address and the variable name ‘weekdays’ started referencing the new object with eight elements in it.  Hence, we can say that the object which is a type of tuple with reference variable name ‘weekdays’ is an IMMUTABLE OBJECT.

Also Read: Understanding the Exploratory Data Analysis (EDA) in Python

Where can you use mutable and immutable objects:

Mutable objects can be used where you want to allow for any updates. For example, you have a list of employee names in your organizations, and that needs to be updated every time a new member is hired. You can create a mutable list, and it can be updated easily.

Immutability offers a lot of useful applications to different sensitive tasks we do in a network centred environment where we allow for parallel processing. By creating immutable objects, you seal the values and ensure that no threads can invoke overwrite/update to your data. This is also useful in situations where you would like to write a piece of code that cannot be modified. For example, a debug code that attempts to find the value of an immutable object.

Watch outs:  Non transitive nature of Immutability:

OK! Now we do understand what mutable & immutable objects in Python are. Let’s go ahead and discuss the combination of these two and explore the possibilities. Let’s discuss, as to how will it behave if you have an immutable object which contains the mutable object(s)? Or vice versa? Let us again use a code to understand this behaviour–

#creating a tuple (immutable object) which contains 2 lists(mutable) as it’s elements

#The elements (lists) contains the name, age & gender 

person = (['Ayaan', 5, 'Male'], ['Aaradhya', 8, 'Female'])

#printing the tuple

print(person)

Output [1]: (['Ayaan', 5, 'Male'], ['Aaradhya', 8, 'Female'])

#printing the location of the object created in the memory address in hexadecimal format

print(hex(id(person)))

Output [2]: 0x1691ef47f88

#Changing the age for the 1st element. Selecting 1st element of tuple by using indexing [0] then 2nd element of the list by using indexing [1] and assigning a new value for age as 4

person[0][1] = 4

#printing the updated tuple

print(person)

Output [3]: (['Ayaan', 4, 'Male'], ['Aaradhya', 8, 'Female'])

#printing the location of the object created in the memory address in hexadecimal format

print(hex(id(person)))

Output [4]: 0x1691ef47f88

In the above code, you can see that the object ‘person’ is immutable since it is a type of tuple. However, it has two lists as it’s elements, and we can change the state of lists (lists being mutable). So, here we did not change the object reference inside the Tuple, but the referenced object was mutated.

Also Read: Real-Time Object Detection Using TensorFlow

Same way, let’s explore how it will behave if you have a mutable object which contains an immutable object? Let us again use a code to understand the behaviour–

#creating a list (mutable object) which contains tuples(immutable) as it’s elements

list1 = [(1, 2, 3), (4, 5, 6)]

#printing the list

print(list1)

Output [1]: [(1, 2, 3), (4, 5, 6)]

#printing the location of the object created in the memory address in hexadecimal format

print(hex(id(list1)))

Output [2]: 0x1691d5b13c8	

#changing object reference at index 0

list1[0] = (7, 8, 9)

#printing the list

Output [3]: [(7, 8, 9), (4, 5, 6)]

#printing the location of the object created in the memory address in hexadecimal format

print(hex(id(list1)))

Output [4]: 0x1691d5b13c8

As an individual, it completely depends upon you and your requirements as to what kind of data structure you would like to create with a combination of mutable & immutable objects. I hope that this information will help you while deciding the type of object you would like to select going forward.

Before I end our discussion on IMMUTABILITY, allow me to use the word ‘CAVITE’ when we discuss the String and Integers. There is an exception, and you may see some surprising results while checking the truthiness for immutability. For instance:
#creating an object of integer type with value 10 and reference variable name ‘x’ 

x = 10
 

#printing the value of ‘x’

print(x)

Output [1]: 10

#Printing the location of the object created in the memory address in hexadecimal format

print(hex(id(x)))

Output [2]: 0x538fb560

#creating an object of integer type with value 10 and reference variable name ‘y’

y = 10

#printing the value of ‘y’

print(y)

Output [3]: 10

#Printing the location of the object created in the memory address in hexadecimal format

print(hex(id(y)))

Output [4]: 0x538fb560

As per our discussion and understanding, so far, the memory address for x & y should have been different, since, 10 is an instance of Integer class which is immutable. However, as shown in the above code, it has the same memory address. This is not something that we expected. It seems that what we have understood and discussed, has an exception as well.

Quick check – Python Data Structures

Immutability of Tuple

Tuples are immutable and hence cannot have any changes in them once they are created in Python. This is because they support the same sequence operations as strings. We all know that strings are immutable. The index operator will select an element from a tuple just like in a string. Hence, they are immutable.

Exceptions in immutability

Like all, there are exceptions in the immutability in python too. Not all immutable objects are really mutable. This will lead to a lot of doubts in your mind. Let us just take an example to understand this.

Consider a tuple ‘tup’.

Now, if we consider tuple tup = (‘GreatLearning’,[4,3,1,2]) ;

We see that the tuple has elements of different data types. The first element here is a string which as we all know is immutable in nature. The second element is a list which we all know is mutable. Now, we all know that the tuple itself is an immutable data type. It cannot change its contents. But, the list inside it can change its contents. So, the value of the Immutable objects cannot be changed but its constituent objects can. change its value.

FAQs

1. Difference between mutable vs immutable in Python?

2. What are the mutable and immutable data types in Python?

• Some mutable data types in Python are:

list, dictionary, set, user-defined classes.

• Some immutable data types are: 

int, float, decimal, bool, string, tuple, range.

3. Are lists mutable in Python?

Lists in Python are mutable data types as the elements of the list can be modified, individual elements can be replaced, and the order of elements can be changed even after the list has been created.
(Examples related to lists have been discussed earlier in this blog.)

4. Why are tuples called immutable types?

Tuple and list data structures are very similar, but one big difference between the data types is that lists are mutable, whereas tuples are immutable. The reason for the tuple’s immutability is that once the elements are added to the tuple and the tuple has been created; it remains unchanged.

A programmer would always prefer building a code that can be reused instead of making the whole data object again. Still, even though tuples are immutable, like lists, they can contain any Python object, including mutable objects.

5. Are sets mutable in Python?

A set is an iterable unordered collection of data type which can be used to perform mathematical operations (like union, intersection, difference etc.). Every element in a set is unique and immutable, i.e. no duplicate values should be there, and the values can’t be changed. However, we can add or remove items from the set as the set itself is mutable.

6. Are strings mutable in Python?

Strings are not mutable in Python. Strings are a immutable data types which means that its value cannot be updated.

Join Great Learning Academy’s free online courses and upgrade your skills today.

Original article source at: https://www.mygreatlearning.com

#python