Jing Zhang

Jing Zhang

1601435293

Install Vue CLI and Create Vue CLI Project in Vue 3

Install Vue CLI and make it much easier to start and manage new Vue projects. Learn how to create new Vue CLI project.

Vue.js keeps on evolving thanks to continuous efforts of the open-source community. One of the most interesting recent changes in Vue 3 is the new improved Vue CLI version. You can use it to configure a new project in a much faster and more streamlined way than ever before, using the command line interface. How to do it? I’m going to walk you through the entire process in this Vue CLI 3 tutorial so sit back.

In this article, I’m going to show you why the freshly released Vue CLI is the best way to start a new Vue project. But before we get to it…

What is Vue.js?

Vue.js is a modern progressive JavaScript framework. You can use it to build user interfaces and Single Page Applications. It’s one of the three most popular JavaScript frameworks (besides React and Angular). According to the recent State of Frontend 2020 report we made, it was the 3rd most popular frontend framework and 45,2% of respondents expressed interest in learning it.

Vue stands out as one of the few big JS frameworks built from scratch and continually developed only by an open-source community. There is no big tech corporation behind it. Just a group of passionate devs, who dedicate their free time to the Vue cause. As I’m writing this article, the work on Vue.js 3 is still underway. This version is going to bring a lot of changes to the current API as well as many other enhancements.

State of Frontend 2020 by TSH provides a very comprehensive collection of most recent frontend trends as well as expert opinions

What does CLI stand for?

CLI stands for Command Line Interface. It’s an app you can control through your terminal. Sounds nice, doesn’t it?

CLI in Vue 3 is written entirely from the beginning. The creators prioritized the ability to configure the environment and extendability with plugins. Even the name of the package has changed – from vue-cli to @vue/cli.

VUE CLI requirements

Not much, just:

  • Node.js version 8.9 or above (8.11.0+ recommended). To check which version you are using, just type the following command into your terminal: node -v
  • Terminal.

How to install Vue CLI

First thing to do is to perform Vue CLI installation. In order to do this, I need to open the terminal and run:

npm install -g @vue/cli

I make sure everything is correct by running:

Vue --version

Because I installed the package correctly, I can now see the version of Vue CLI I just added. While I was writing this article (August 2020) the current version of Vue CLI was 4.5.4.

And that’s it as far as Vue CLI installation is concerned!

#vue #javascript #web-development #programming #developer

What is GEEK

Buddha Community

Install Vue CLI and Create Vue CLI Project in Vue 3
Autumn  Blick

Autumn Blick

1593867420

Top Android Projects with Source Code

Android Projects with Source Code – Your entry pass into the world of Android

Hello Everyone, welcome to this article, which is going to be really important to all those who’re in dilemma for their projects and the project submissions. This article is also going to help you if you’re an enthusiast looking forward to explore and enhance your Android skills. The reason is that we’re here to provide you the best ideas of Android Project with source code that you can choose as per your choice.

These project ideas are simple suggestions to help you deal with the difficulty of choosing the correct projects. In this article, we’ll see the project ideas from beginners level and later we’ll move on to intermediate to advance.

top android projects with source code

Android Projects with Source Code

Before working on real-time projects, it is recommended to create a sample hello world project in android studio and get a flavor of project creation as well as execution: Create your first android project

Android Projects for beginners

1. Calculator

build a simple calculator app in android studio source code

Android Project: A calculator will be an easy application if you have just learned Android and coding for Java. This Application will simply take the input values and the operation to be performed from the users. After taking the input it’ll return the results to them on the screen. This is a really easy application and doesn’t need use of any particular package.

To make a calculator you’d need Android IDE, Kotlin/Java for coding, and for layout of your application, you’d need XML or JSON. For this, coding would be the same as that in any language, but in the form of an application. Not to forget creating a calculator initially will increase your logical thinking.

Once the user installs the calculator, they’re ready to use it even without the internet. They’ll enter the values, and the application will show them the value after performing the given operations on the entered operands.

Source Code: Simple Calculator Project

2. A Reminder App

Android Project: This is a good project for beginners. A Reminder App can help you set reminders for different events that you have throughout the day. It’ll help you stay updated with all your tasks for the day. It can be useful for all those who are not so good at organizing their plans and forget easily. This would be a simple application just whose task would be just to remind you of something at a particular time.

To make a Reminder App you need to code in Kotlin/Java and design the layout using XML or JSON. For the functionality of the app, you’d need to make use of AlarmManager Class and Notifications in Android.

In this, the user would be able to set reminders and time in the application. Users can schedule reminders that would remind them to drink water again and again throughout the day. Or to remind them of their medications.

3. Quiz Application

Android Project: Another beginner’s level project Idea can be a Quiz Application in android. Here you can provide the users with Quiz on various general knowledge topics. These practices will ensure that you’re able to set the layouts properly and slowly increase your pace of learning the Android application development. In this you’ll learn to use various Layout components at the same time understanding them better.

To make a quiz application you’ll need to code in Java and set layouts using xml or java whichever you prefer. You can also use JSON for the layouts whichever preferable.

In the app, questions would be asked and answers would be shown as multiple choices. The user selects the answer and gets shown on the screen if the answers are correct. In the end the final marks would be shown to the users.

4. Simple Tic-Tac-Toe

android project tic tac toe game app

Android Project: Tic-Tac-Toe is a nice game, I guess most of you all are well aware of it. This will be a game for two players. In this android game, users would be putting X and O in the given 9 parts of a box one by one. The first player to arrange X or O in an adjacent line of three wins.

To build this game, you’d need Java and XML for Android Studio. And simply apply the logic on that. This game will have a set of three matches. So, it’ll also have a scoreboard. This scoreboard will show the final result at the end of one complete set.

Upon entering the game they’ll enter their names. And that’s when the game begins. They’ll touch one of the empty boxes present there and get their turn one by one. At the end of the game, there would be a winner declared.

Source Code: Tic Tac Toe Game Project

5. Stopwatch

Android Project: A stopwatch is another simple android project idea that will work the same as a normal handheld timepiece that measures the time elapsed between its activation and deactivation. This application will have three buttons that are: start, stop, and hold.

This application would need to use Java and XML. For this application, we need to set the timer properly as it is initially set to milliseconds, and that should be converted to minutes and then hours properly. The users can use this application and all they’d need to do is, start the stopwatch and then stop it when they are done. They can also pause the timer and continue it again when they like.

6. To Do App

Android Project: This is another very simple project idea for you as a beginner. This application as the name suggests will be a To-Do list holding app. It’ll store the users schedules and their upcoming meetings or events. In this application, users will be enabled to write their important notes as well. To make it safe, provide a login page before the user can access it.

So, this app will have a login page, sign-up page, logout system, and the area to write their tasks, events, or important notes. You can build it in android studio using Java and XML at ease. Using XML you can build the user interface as user-friendly as you can. And to store the users’ data, you can use SQLite enabling the users to even delete the data permanently.

Now for users, they will sign up and get access to the write section. Here the users can note down the things and store them permanently. Users can also alter the data or delete them. Finally, they can logout and also, login again and again whenever they like.

7. Roman to decimal converter

Android Project: This app is aimed at the conversion of Roman numbers to their significant decimal number. It’ll help to check the meaning of the roman numbers. Moreover, it will be easy to develop and will help you get your hands on coding and Android.

You need to use Android Studio, Java for coding and XML for interface. The application will take input from the users and convert them to decimal. Once it converts the Roman no. into decimal, it will show the results on the screen.

The users are supposed to just enter the Roman Number and they’ll get the decimal values on the screen. This can be a good android project for final year students.

8. Virtual Dice Roller

Android Project: Well, coming to this part that is Virtual Dice or a random no. generator. It is another simple but interesting app for computer science students. The only task that it would need to do would be to generate a number randomly. This can help people who’re often confused between two or more things.

Using a simple random number generator you can actually create something as good as this. All you’d need to do is get you hands-on OnClick listeners. And a good layout would be cherry on the cake.

The user’s task would be to set the range of the numbers and then click on the roll button. And the app will show them a randomly generated number. Isn’t it interesting ? Try soon!

9. A Scientific Calculator App

Android Project: This application is very important for you as a beginner as it will let you use your logical thinking and improve your programming skills. This is a scientific calculator that will help the users to do various calculations at ease.

To make this application you’d need to use Android Studio. Here you’d need to use arithmetic logics for the calculations. The user would need to give input to the application that will be in terms of numbers. After that, the user will give the operator as an input. Then the Application will calculate and generate the result on the user screen.

10. SMS App

Android Project: An SMS app is another easy but effective idea. It will let you send the SMS to various no. just in the same way as you use the default messaging application in your phone. This project will help you with better understanding of SMSManager in Android.

For this application, you would need to implement Java class SMSManager in Android. For the Layout you can use XML or JSON. Implementing SMSManager into the app is an easy task, so you would love this.

The user would be provided with the facility to text to whichever number they wish also, they’d be able to choose the numbers from the contact list. Another thing would be the Textbox, where they’ll enter their message. Once the message is entered they can happily click on the send button.

#android tutorials #android application final year project #android mini projects #android project for beginners #android project ideas #android project ideas for beginners #android projects #android projects for students #android projects with source code #android topics list #intermediate android projects #real-time android projects

Luna  Mosciski

Luna Mosciski

1600583123

8 Popular Websites That Use The Vue.JS Framework

In this article, we are going to list out the most popular websites using Vue JS as their frontend framework.

Vue JS is one of those elite progressive JavaScript frameworks that has huge demand in the web development industry. Many popular websites are developed using Vue in their frontend development because of its imperative features.

This framework was created by Evan You and still it is maintained by his private team members. Vue is of course an open-source framework which is based on MVVM concept (Model-view view-Model) and used extensively in building sublime user-interfaces and also considered a prime choice for developing single-page heavy applications.

Released in February 2014, Vue JS has gained 64,828 stars on Github, making it very popular in recent times.

Evan used Angular JS on many operations while working for Google and integrated many features in Vue to cover the flaws of Angular.

“I figured, what if I could just extract the part that I really liked about Angular and build something really lightweight." - Evan You

#vuejs #vue #vue-with-laravel #vue-top-story #vue-3 #build-vue-frontend #vue-in-laravel #vue.js

A Wrapper for Sembast and SQFlite to Enable Easy

FHIR_DB

This is really just a wrapper around Sembast_SQFLite - so all of the heavy lifting was done by Alex Tekartik. I highly recommend that if you have any questions about working with this package that you take a look at Sembast. He's also just a super nice guy, and even answered a question for me when I was deciding which sembast version to use. As usual, ResoCoder also has a good tutorial.

I have an interest in low-resource settings and thus a specific reason to be able to store data offline. To encourage this use, there are a number of other packages I have created based around the data format FHIR. FHIR® is the registered trademark of HL7 and is used with the permission of HL7. Use of the FHIR trademark does not constitute endorsement of this product by HL7.

Using the Db

So, while not absolutely necessary, I highly recommend that you use some sort of interface class. This adds the benefit of more easily handling errors, plus if you change to a different database in the future, you don't have to change the rest of your app, just the interface.

I've used something like this in my projects:

class IFhirDb {
  IFhirDb();
  final ResourceDao resourceDao = ResourceDao();

  Future<Either<DbFailure, Resource>> save(Resource resource) async {
    Resource resultResource;
    try {
      resultResource = await resourceDao.save(resource);
    } catch (error) {
      return left(DbFailure.unableToSave(error: error.toString()));
    }
    return right(resultResource);
  }

  Future<Either<DbFailure, List<Resource>>> returnListOfSingleResourceType(
      String resourceType) async {
    List<Resource> resultList;
    try {
      resultList =
          await resourceDao.getAllSortedById(resourceType: resourceType);
    } catch (error) {
      return left(DbFailure.unableToObtainList(error: error.toString()));
    }
    return right(resultList);
  }

  Future<Either<DbFailure, List<Resource>>> searchFunction(
      String resourceType, String searchString, String reference) async {
    List<Resource> resultList;
    try {
      resultList =
          await resourceDao.searchFor(resourceType, searchString, reference);
    } catch (error) {
      return left(DbFailure.unableToObtainList(error: error.toString()));
    }
    return right(resultList);
  }
}

I like this because in case there's an i/o error or something, it won't crash your app. Then, you can call this interface in your app like the following:

final patient = Patient(
    resourceType: 'Patient',
    name: [HumanName(text: 'New Patient Name')],
    birthDate: Date(DateTime.now()),
);

final saveResult = await IFhirDb().save(patient);

This will save your newly created patient to the locally embedded database.

IMPORTANT: this database will expect that all previously created resources have an id. When you save a resource, it will check to see if that resource type has already been stored. (Each resource type is saved in it's own store in the database). It will then check if there is an ID. If there's no ID, it will create a new one for that resource (along with metadata on version number and creation time). It will save it, and return the resource. If it already has an ID, it will copy the the old version of the resource into a _history store. It will then update the metadata of the new resource and save that version into the appropriate store for that resource. If, for instance, we have a previously created patient:

{
    "resourceType": "Patient",
    "id": "fhirfli-294057507-6811107",
    "meta": {
        "versionId": "1",
        "lastUpdated": "2020-10-16T19:41:28.054369Z"
    },
    "name": [
        {
            "given": ["New"],
            "family": "Patient"
        }
    ],
    "birthDate": "2020-10-16"
}

And we update the last name to 'Provider'. The above version of the patient will be kept in _history, while in the 'Patient' store in the db, we will have the updated version:

{
    "resourceType": "Patient",
    "id": "fhirfli-294057507-6811107",
    "meta": {
        "versionId": "2",
        "lastUpdated": "2020-10-16T19:45:07.316698Z"
    },
    "name": [
        {
            "given": ["New"],
            "family": "Provider"
        }
    ],
    "birthDate": "2020-10-16"
}

This way we can keep track of all previous version of all resources (which is obviously important in medicine).

For most of the interactions (saving, deleting, etc), they work the way you'd expect. The only difference is search. Because Sembast is NoSQL, we can search on any of the fields in a resource. If in our interface class, we have the following function:

  Future<Either<DbFailure, List<Resource>>> searchFunction(
      String resourceType, String searchString, String reference) async {
    List<Resource> resultList;
    try {
      resultList =
          await resourceDao.searchFor(resourceType, searchString, reference);
    } catch (error) {
      return left(DbFailure.unableToObtainList(error: error.toString()));
    }
    return right(resultList);
  }

You can search for all immunizations of a certain patient:

searchFunction(
        'Immunization', 'patient.reference', 'Patient/$patientId');

This function will search through all entries in the 'Immunization' store. It will look at all 'patient.reference' fields, and return any that match 'Patient/$patientId'.

The last thing I'll mention is that this is a password protected db, using AES-256 encryption (although it can also use Salsa20). Anytime you use the db, you have the option of using a password for encryption/decryption. Remember, if you setup the database using encryption, you will only be able to access it using that same password. When you're ready to change the password, you will need to call the update password function. If we again assume we created a change password method in our interface, it might look something like this:

class IFhirDb {
  IFhirDb();
  final ResourceDao resourceDao = ResourceDao();
  ...
    Future<Either<DbFailure, Unit>> updatePassword(String oldPassword, String newPassword) async {
    try {
      await resourceDao.updatePw(oldPassword, newPassword);
    } catch (error) {
      return left(DbFailure.unableToUpdatePassword(error: error.toString()));
    }
    return right(Unit);
  }

You don't have to use a password, and in that case, it will save the db file as plain text. If you want to add a password later, it will encrypt it at that time.

General Store

After using this for a while in an app, I've realized that it needs to be able to store data apart from just FHIR resources, at least on occasion. For this, I've added a second class for all versions of the database called GeneralDao. This is similar to the ResourceDao, but fewer options. So, in order to save something, it would look like this:

await GeneralDao().save('password', {'new':'map'});
await GeneralDao().save('password', {'new':'map'}, 'key');

The difference between these two options is that the first one will generate a key for the map being stored, while the second will store the map using the key provided. Both will return the key after successfully storing the map.

Other functions available include:

// deletes everything in the general store
await GeneralDao().deleteAllGeneral('password'); 

// delete specific entry
await GeneralDao().delete('password','key'); 

// returns map with that key
await GeneralDao().find('password', 'key'); 

FHIR® is a registered trademark of Health Level Seven International (HL7) and its use does not constitute an endorsement of products by HL7®

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add fhir_db

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:
  fhir_db: ^0.4.3

Alternatively, your editor might support or flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:fhir_db/dstu2.dart';
import 'package:fhir_db/dstu2/fhir_db.dart';
import 'package:fhir_db/dstu2/general_dao.dart';
import 'package:fhir_db/dstu2/resource_dao.dart';
import 'package:fhir_db/encrypt/aes.dart';
import 'package:fhir_db/encrypt/salsa.dart';
import 'package:fhir_db/r4.dart';
import 'package:fhir_db/r4/fhir_db.dart';
import 'package:fhir_db/r4/general_dao.dart';
import 'package:fhir_db/r4/resource_dao.dart';
import 'package:fhir_db/r5.dart';
import 'package:fhir_db/r5/fhir_db.dart';
import 'package:fhir_db/r5/general_dao.dart';
import 'package:fhir_db/r5/resource_dao.dart';
import 'package:fhir_db/stu3.dart';
import 'package:fhir_db/stu3/fhir_db.dart';
import 'package:fhir_db/stu3/general_dao.dart';
import 'package:fhir_db/stu3/resource_dao.dart'; 

example/lib/main.dart

import 'package:fhir/r4.dart';
import 'package:fhir_db/r4.dart';
import 'package:flutter/material.dart';
import 'package:test/test.dart';

Future<void> main() async {
  WidgetsFlutterBinding.ensureInitialized();

  final resourceDao = ResourceDao();

  // await resourceDao.updatePw('newPw', null);
  await resourceDao.deleteAllResources(null);

  group('Playing with passwords', () {
    test('Playing with Passwords', () async {
      final patient = Patient(id: Id('1'));

      final saved = await resourceDao.save(null, patient);

      await resourceDao.updatePw(null, 'newPw');
      final search1 = await resourceDao.find('newPw',
          resourceType: R4ResourceType.Patient, id: Id('1'));
      expect(saved, search1[0]);

      await resourceDao.updatePw('newPw', 'newerPw');
      final search2 = await resourceDao.find('newerPw',
          resourceType: R4ResourceType.Patient, id: Id('1'));
      expect(saved, search2[0]);

      await resourceDao.updatePw('newerPw', null);
      final search3 = await resourceDao.find(null,
          resourceType: R4ResourceType.Patient, id: Id('1'));
      expect(saved, search3[0]);

      await resourceDao.deleteAllResources(null);
    });
  });

  final id = Id('12345');
  group('Saving Things:', () {
    test('Save Patient', () async {
      final humanName = HumanName(family: 'Atreides', given: ['Duke']);
      final patient = Patient(id: id, name: [humanName]);
      final saved = await resourceDao.save(null, patient);

      expect(saved.id, id);

      expect((saved as Patient).name?[0], humanName);
    });

    test('Save Organization', () async {
      final organization = Organization(id: id, name: 'FhirFli');
      final saved = await resourceDao.save(null, organization);

      expect(saved.id, id);

      expect((saved as Organization).name, 'FhirFli');
    });

    test('Save Observation1', () async {
      final observation1 = Observation(
        id: Id('obs1'),
        code: CodeableConcept(text: 'Observation #1'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save(null, observation1);

      expect(saved.id, Id('obs1'));

      expect((saved as Observation).code.text, 'Observation #1');
    });

    test('Save Observation1 Again', () async {
      final observation1 = Observation(
          id: Id('obs1'),
          code: CodeableConcept(text: 'Observation #1 - Updated'));
      final saved = await resourceDao.save(null, observation1);

      expect(saved.id, Id('obs1'));

      expect((saved as Observation).code.text, 'Observation #1 - Updated');

      expect(saved.meta?.versionId, Id('2'));
    });

    test('Save Observation2', () async {
      final observation2 = Observation(
        id: Id('obs2'),
        code: CodeableConcept(text: 'Observation #2'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save(null, observation2);

      expect(saved.id, Id('obs2'));

      expect((saved as Observation).code.text, 'Observation #2');
    });

    test('Save Observation3', () async {
      final observation3 = Observation(
        id: Id('obs3'),
        code: CodeableConcept(text: 'Observation #3'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save(null, observation3);

      expect(saved.id, Id('obs3'));

      expect((saved as Observation).code.text, 'Observation #3');
    });
  });

  group('Finding Things:', () {
    test('Find 1st Patient', () async {
      final search = await resourceDao.find(null,
          resourceType: R4ResourceType.Patient, id: id);
      final humanName = HumanName(family: 'Atreides', given: ['Duke']);

      expect(search.length, 1);

      expect((search[0] as Patient).name?[0], humanName);
    });

    test('Find 3rd Observation', () async {
      final search = await resourceDao.find(null,
          resourceType: R4ResourceType.Observation, id: Id('obs3'));

      expect(search.length, 1);

      expect(search[0].id, Id('obs3'));

      expect((search[0] as Observation).code.text, 'Observation #3');
    });

    test('Find All Observations', () async {
      final search = await resourceDao.getResourceType(
        null,
        resourceTypes: [R4ResourceType.Observation],
      );

      expect(search.length, 3);

      final idList = [];
      for (final obs in search) {
        idList.add(obs.id.toString());
      }

      expect(idList.contains('obs1'), true);

      expect(idList.contains('obs2'), true);

      expect(idList.contains('obs3'), true);
    });

    test('Find All (non-historical) Resources', () async {
      final search = await resourceDao.getAll(null);

      expect(search.length, 5);
      final patList = search.toList();
      final orgList = search.toList();
      final obsList = search.toList();
      patList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Patient);
      orgList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Organization);
      obsList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Observation);

      expect(patList.length, 1);

      expect(orgList.length, 1);

      expect(obsList.length, 3);
    });
  });

  group('Deleting Things:', () {
    test('Delete 2nd Observation', () async {
      await resourceDao.delete(
          null, null, R4ResourceType.Observation, Id('obs2'), null, null);

      final search = await resourceDao.getResourceType(
        null,
        resourceTypes: [R4ResourceType.Observation],
      );

      expect(search.length, 2);

      final idList = [];
      for (final obs in search) {
        idList.add(obs.id.toString());
      }

      expect(idList.contains('obs1'), true);

      expect(idList.contains('obs2'), false);

      expect(idList.contains('obs3'), true);
    });

    test('Delete All Observations', () async {
      await resourceDao.deleteSingleType(null,
          resourceType: R4ResourceType.Observation);

      final search = await resourceDao.getAll(null);

      expect(search.length, 2);

      final patList = search.toList();
      final orgList = search.toList();
      patList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Patient);
      orgList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Organization);

      expect(patList.length, 1);

      expect(patList.length, 1);
    });

    test('Delete All Resources', () async {
      await resourceDao.deleteAllResources(null);

      final search = await resourceDao.getAll(null);

      expect(search.length, 0);
    });
  });

  group('Password - Saving Things:', () {
    test('Save Patient', () async {
      await resourceDao.updatePw(null, 'newPw');
      final humanName = HumanName(family: 'Atreides', given: ['Duke']);
      final patient = Patient(id: id, name: [humanName]);
      final saved = await resourceDao.save('newPw', patient);

      expect(saved.id, id);

      expect((saved as Patient).name?[0], humanName);
    });

    test('Save Organization', () async {
      final organization = Organization(id: id, name: 'FhirFli');
      final saved = await resourceDao.save('newPw', organization);

      expect(saved.id, id);

      expect((saved as Organization).name, 'FhirFli');
    });

    test('Save Observation1', () async {
      final observation1 = Observation(
        id: Id('obs1'),
        code: CodeableConcept(text: 'Observation #1'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save('newPw', observation1);

      expect(saved.id, Id('obs1'));

      expect((saved as Observation).code.text, 'Observation #1');
    });

    test('Save Observation1 Again', () async {
      final observation1 = Observation(
          id: Id('obs1'),
          code: CodeableConcept(text: 'Observation #1 - Updated'));
      final saved = await resourceDao.save('newPw', observation1);

      expect(saved.id, Id('obs1'));

      expect((saved as Observation).code.text, 'Observation #1 - Updated');

      expect(saved.meta?.versionId, Id('2'));
    });

    test('Save Observation2', () async {
      final observation2 = Observation(
        id: Id('obs2'),
        code: CodeableConcept(text: 'Observation #2'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save('newPw', observation2);

      expect(saved.id, Id('obs2'));

      expect((saved as Observation).code.text, 'Observation #2');
    });

    test('Save Observation3', () async {
      final observation3 = Observation(
        id: Id('obs3'),
        code: CodeableConcept(text: 'Observation #3'),
        effectiveDateTime: FhirDateTime(DateTime(1981, 09, 18)),
      );
      final saved = await resourceDao.save('newPw', observation3);

      expect(saved.id, Id('obs3'));

      expect((saved as Observation).code.text, 'Observation #3');
    });
  });

  group('Password - Finding Things:', () {
    test('Find 1st Patient', () async {
      final search = await resourceDao.find('newPw',
          resourceType: R4ResourceType.Patient, id: id);
      final humanName = HumanName(family: 'Atreides', given: ['Duke']);

      expect(search.length, 1);

      expect((search[0] as Patient).name?[0], humanName);
    });

    test('Find 3rd Observation', () async {
      final search = await resourceDao.find('newPw',
          resourceType: R4ResourceType.Observation, id: Id('obs3'));

      expect(search.length, 1);

      expect(search[0].id, Id('obs3'));

      expect((search[0] as Observation).code.text, 'Observation #3');
    });

    test('Find All Observations', () async {
      final search = await resourceDao.getResourceType(
        'newPw',
        resourceTypes: [R4ResourceType.Observation],
      );

      expect(search.length, 3);

      final idList = [];
      for (final obs in search) {
        idList.add(obs.id.toString());
      }

      expect(idList.contains('obs1'), true);

      expect(idList.contains('obs2'), true);

      expect(idList.contains('obs3'), true);
    });

    test('Find All (non-historical) Resources', () async {
      final search = await resourceDao.getAll('newPw');

      expect(search.length, 5);
      final patList = search.toList();
      final orgList = search.toList();
      final obsList = search.toList();
      patList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Patient);
      orgList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Organization);
      obsList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Observation);

      expect(patList.length, 1);

      expect(orgList.length, 1);

      expect(obsList.length, 3);
    });
  });

  group('Password - Deleting Things:', () {
    test('Delete 2nd Observation', () async {
      await resourceDao.delete(
          'newPw', null, R4ResourceType.Observation, Id('obs2'), null, null);

      final search = await resourceDao.getResourceType(
        'newPw',
        resourceTypes: [R4ResourceType.Observation],
      );

      expect(search.length, 2);

      final idList = [];
      for (final obs in search) {
        idList.add(obs.id.toString());
      }

      expect(idList.contains('obs1'), true);

      expect(idList.contains('obs2'), false);

      expect(idList.contains('obs3'), true);
    });

    test('Delete All Observations', () async {
      await resourceDao.deleteSingleType('newPw',
          resourceType: R4ResourceType.Observation);

      final search = await resourceDao.getAll('newPw');

      expect(search.length, 2);

      final patList = search.toList();
      final orgList = search.toList();
      patList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Patient);
      orgList.retainWhere(
          (resource) => resource.resourceType == R4ResourceType.Organization);

      expect(patList.length, 1);

      expect(patList.length, 1);
    });

    test('Delete All Resources', () async {
      await resourceDao.deleteAllResources('newPw');

      final search = await resourceDao.getAll('newPw');

      expect(search.length, 0);

      await resourceDao.updatePw('newPw', null);
    });
  });
} 

Download Details:

Author: MayJuun

Source Code: https://github.com/MayJuun/fhir/tree/main/fhir_db

#sqflite  #dart  #flutter 

Shawn  Durgan

Shawn Durgan

1595547778

10 Writing steps to create a good project brief - Mobile app development

Developing a mobile application can often be more challenging than it seems at first glance. Whether you’re a developer, UI designer, project lead or CEO of a mobile-based startup, writing good project briefs prior to development is pivotal. According to Tech Jury, 87% of smartphone users spend time exclusively on mobile apps, with 18-24-year-olds spending 66% of total digital time on mobile apps. Of that, 89% of the time is spent on just 18 apps depending on individual users’ preferences, making proper app planning crucial for success.

Today’s audiences know what they want and don’t want in their mobile apps, encouraging teams to carefully write their project plans before they approach development. But how do you properly write a mobile app development brief without sacrificing your vision and staying within the initial budget? Why should you do so in the first place? Let’s discuss that and more in greater detail.

Why a Good Mobile App Project Brief Matters?

Why-a-Good-Mobile-App-Project-Brief-Matters

It’s worth discussing the significance of mobile app project briefs before we tackle the writing process itself. In practice, a project brief is used as a reference tool for developers to remain focused on the client’s deliverables. Approaching the development process without written and approved documentation can lead to drastic, last-minute changes, misunderstanding, as well as a loss of resources and brand reputation.

For example, developing a mobile app that filters restaurants based on food type, such as Happy Cow, means that developers should stay focused on it. Knowing that such and such features, UI elements, and API are necessary will help team members collaborate better in order to meet certain expectations. Whether you develop an app under your brand’s banner or outsource coding and design services to would-be clients, briefs can provide you with several benefits:

  • Clarity on what your mobile app project “is” and “isn’t” early in development
  • Point of reference for developers, project leads, and clients throughout the cycle
  • Smart allocation of available time and resources based on objective development criteria
  • Streamlined project data storage for further app updates and iterations

Writing Steps to Create a Good Mobile App Project Brief

Writing-Steps-to-Create-a-Good-Mobile-App-Project-Brief

1. Establish the “You” Behind the App

Depending on how “open” your project is to the public, you will want to write a detailed section about who the developers are. Elements such as company name, address, project lead, project title, as well as contact information, should be included in this introductory segment. Regardless of whether you build an in-house app or outsource developers to a client, this section is used for easy document storage and access.

#android app #ios app #minimum viable product (mvp) #mobile app development #web development #how do you write a project design #how to write a brief #how to write a project summary #how to write project summary #program brief example #project brief #project brief example #project brief template #project proposal brief #simple project brief template

Jing Zhang

Jing Zhang

1601435293

Install Vue CLI and Create Vue CLI Project in Vue 3

Install Vue CLI and make it much easier to start and manage new Vue projects. Learn how to create new Vue CLI project.

Vue.js keeps on evolving thanks to continuous efforts of the open-source community. One of the most interesting recent changes in Vue 3 is the new improved Vue CLI version. You can use it to configure a new project in a much faster and more streamlined way than ever before, using the command line interface. How to do it? I’m going to walk you through the entire process in this Vue CLI 3 tutorial so sit back.

In this article, I’m going to show you why the freshly released Vue CLI is the best way to start a new Vue project. But before we get to it…

What is Vue.js?

Vue.js is a modern progressive JavaScript framework. You can use it to build user interfaces and Single Page Applications. It’s one of the three most popular JavaScript frameworks (besides React and Angular). According to the recent State of Frontend 2020 report we made, it was the 3rd most popular frontend framework and 45,2% of respondents expressed interest in learning it.

Vue stands out as one of the few big JS frameworks built from scratch and continually developed only by an open-source community. There is no big tech corporation behind it. Just a group of passionate devs, who dedicate their free time to the Vue cause. As I’m writing this article, the work on Vue.js 3 is still underway. This version is going to bring a lot of changes to the current API as well as many other enhancements.

State of Frontend 2020 by TSH provides a very comprehensive collection of most recent frontend trends as well as expert opinions

What does CLI stand for?

CLI stands for Command Line Interface. It’s an app you can control through your terminal. Sounds nice, doesn’t it?

CLI in Vue 3 is written entirely from the beginning. The creators prioritized the ability to configure the environment and extendability with plugins. Even the name of the package has changed – from vue-cli to @vue/cli.

VUE CLI requirements

Not much, just:

  • Node.js version 8.9 or above (8.11.0+ recommended). To check which version you are using, just type the following command into your terminal: node -v
  • Terminal.

How to install Vue CLI

First thing to do is to perform Vue CLI installation. In order to do this, I need to open the terminal and run:

npm install -g @vue/cli

I make sure everything is correct by running:

Vue --version

Because I installed the package correctly, I can now see the version of Vue CLI I just added. While I was writing this article (August 2020) the current version of Vue CLI was 4.5.4.

And that’s it as far as Vue CLI installation is concerned!

#vue #javascript #web-development #programming #developer