Nextbox WiFi Extender Setup Via Re.nextbox.home

In comparison to others, the Nextbox wifi extender setup is far too simple. The steps below will help you install it, access its login admin page, and configure its settings. So, without further ado, let's begin the Nextbox extender setup process.

Nextbox range extender setup with the user interface-

The user interface methods for connecting your Nextbox to your router wifi are as follows. All of these steps are stated below.

  1. After connecting your phone to your Nextbox range extender, navigate to the website.
  2. When you connect its network via wifi settings, it will show that the Nextbox is connected but there is no internet.
  3. To connect your range extender to your main device, you must first configure its settings in the browser.
  4. It will present you with two options. One is using properties to manage its network settings, while the other is using the browser to configure its network settings.
  5. The Nextbox configuration will be selected via the user interface.
  6. It walks you through its website, or you can go directly to its website by typing http /re.nextbox.home.
  7. Enter your Nextbox login credentials in the admin box to find them and log in to your account.
  8. Then, navigate to the wifi configuration page and connect it to your host device network.
  9. You will find your host device's network name among the available network names and select it to connect its network to your range extender's network.
  10. To complete the Nextbox extender wifi setup, follow the on-screen instructions.
  11. So, these are the steps to connect your wifi extender to your wifi router network.

Steps for the Nextbox Extender Login-

The following steps will guide you through the process of accessing the Nextbox extender admin page.

  1. Enter http /re.nextbox.home login into the web browser's search bar. It allows you to quickly access the Nextbox range extender's home page.
  2. If you want to access your wireless range extender's admin page, select the Nextbox login option.
  3. The Nextbox extender login box will appear on the screen of your device.
  4. Enter the Nextbox wifi extender login username and password for your device.
  5. Check both the entered information.
  6. Wait until the nextbox extender login confirmation message disappears from the screen.
  7. Once completed, you will be able to manage and configure your nextbox range extender in a different location.
  8. You can easily set your Nextbox extender password and username via the nextbox wifi extender setup page. If you want to reset the Nextbox extender password, go to the Nextbox setup page and enter your password through the security encryption settings. It enables you to easily configure your wireless device's password and other settings.

Steps for the Nextbox WiFi Extender Configuration-

You can easily manage and control all of your range extender's wireless, basic, and advanced settings via the nextbox wifi extender setup page. The steps below will assist you in configuring your Nextbox wifi extender settings.

  1. Enter re.nextbox.home into the browser's address bar.
  2. After that, wait a minute before tapping on the login option.
  3. The nextbox login box basically asks you for your login information.
  4. In this Nextbox login box, you will enter your admin username and password. If you have forgotten your Nextbox wifi extender password, you can reset it by selecting the Nextbox extender password reset option. Make a new password by following the on-screen instructions.
  5. You will now configure the nextbox wifi extender settings.
  6. Enter the setting provided by the menu option.
  7. Locate it and configure your device's settings by following the instructions on your computer screen.
  8. Finally, you will save all of your settings in order to properly configure your extender.

Finally, your nextbox extender will be set up. If facing any issues then you can contact our expert team they will guide you. You can also visit our website www.wirelessextendersetup.org 
#internet #wifi #setup #usa #technology #service #extender #router 

How to Fix WiFi Extender Not Connecting to Internet

If your wifi extender not connect to Internet router, then you need to reset your extender. The location of the reset button in the extender may vary depending on the brand. The reset button will be present at the back of your extender and press it for 10 seconds using a needle. This will reset all the current settings and allows you to modify your extender to your wish.

Check to see if another similar network is available in your area using other devices such as phones, tablets, and laptops. To change the settings of your extender and router, you must first determine the IP address of your Wi-Fi router. Reboot your router and extender, and then rescan. Change the router and extender's passwords and usernames, and keep this information for future connections. 

Issue’s Netgear WiFi extender not connecting to internet

If your Netgear WiFi extender not connecting to internet, then one of the following is the reason behind this:

  1. The device is not properly configured for Netgear extender to use
  2. The software or hardware of the WiFi range extender is faulty. Due to this, the Netgear extender not connecting to the internet on Windows 7/8/10, Linux, Mac, or other operating systems.
  3. Cable connections are loose.
  4. Interference in the path of extenders & signals is another reason.
  5. The extender is placed in a dead zone.
  6. Poor or no connection status of your network adapter.
  7. The extender is showing an orange LED light.
  8. Outdated Netgear extender firmware.

Here is hope that you now know the factor causing WiFi connectivity problems. However, if all things are on good terms from your end, execute the steps outlined underneath to fix the issue.

Fix: Netgear WiFi Extender Not Connecting to Internet-

With no more ado, let’s start troubleshooting the problem-

  1. Place your WiFi extender away from interference-creating devices such as microwaves, Bluetooth devices, cordless phones, metal objects, mirrors, glasses, fish tanks, etc.
  2. Check the LED lights on your extender as well as the router. On the off chance that the power light is showing in red color, it signifies that your WiFi extender is not connecting to the router.
  3. A blinking orange LED light implies that the extender is connected to the router but there is no internet/WAN.
  4. Found no issue with the LED lights on the extender and router? Go for loose connections or plugins checking.
  5. Reboot your PC, modem, computer, laptop, extender, and router, and verify if it fixes the issue or not.
  6. If the error is still annoying you, log in to 
  7. Lastly, go for the Netgear extender reset. Just press the reset button on your device and restore all the default factory settings.

Still, Facing the Issue?

We all understand how frustrating it is – when your Netgear extender refuses to connect to the internet. However, it is all dependent on the situation that leads to this issue. Therefore, considering this, For any query, you can visit our website and also call our expert team they will guide you.  www.wirelessextendersetup.org   

wifi extender not connecting to internet netgear wifi range extender not connecting to internet netgear nighthawk wifi extender not connecting to internet
#wifi #internet #reset #usa #technology #extender #router #fixing 

How to Set Up Spectrum WiFi Router- Wireless Extender Setup

In this guide, we are going to discuss easy steps for spectrum wifi setup. If you looking guide for the setup then read the guide.

 

Post image

Select Turn on a content blocker to enable parental controls. The first step will be to connect to your router. Connect one end of the coax wire to the cable wall outlet and the other end to the modem. Sign in to view and pay your bill, manage your account, and watch TV from anywhere.

As a result, you should double-check the above and seek assistance from your ISP. detailed instructions for installing and configuring a Then sele

ct Manage Network from the drop-down menu under Services > Internet. Connect the power cord to the wifi router and the other end to an electrical outlet.

Connect the router's power cord next. Connect one end to the ethernet port on your modem and the other to the internet port on your router. Switch to Spectrum Internet ® right away. Log in to your Spectrum account to check and pay your bill, watch TV, manage your account, and do other things. Your spectrum service should be activated quickly. Then, go to the antivirus tab and select preferences.

However, keep in mind that the IP address of a router may differ in some cases. You can continue to use your 2.4 GHz only devices if you have a router with a single network that automatically selects between 2.5 GHz and 5 GHz. Finally, after entering a new password and network name, click Save. It will take you directly to the spectrum activation page.

Install the Spectrum App on Android or iPhone and Follow the Steps Below-

If you have an Android phone, you can connect to spectrum wifi hotspots right away. Wait for the modem to connect to the network (about 2 to 5 minutes) before proceeding to the next stage of spectrum internet and wifi setup.

Wait for the wifi light on the front panel of the wifi router to illuminate.

Start using your Spectrum internet service. Change to a broadband internet connection.

Connect the modem's power cord to an electrical outlet on the other end.

This Address, as well as the Login Credentials, will be Printed on the Router-

Creating a profile is simple and quick. You can do this by launching a browser and entering your router's IP address, which is typically 192.168.0.1 or 192.168.1.1.

It is necessary to upgrade your browser. Unfortunately, this browser is no longer available.

Connect the coax wire to the voice, internet, and wifi frequencies on the spectrum.

Connect one end of the coax wire to the cable wall outlet and the other end to the modem.

How to Connect to the Internet Using WiFi-

Launch the My Spectrum app on your smartphone. First, connect the coax cable. Sign up now for a fantastic deal on fast-spectrum internet with a consistent connection all year.

Then, in the address box, enter spectrum.net. After connecting the router, simply connect to your new wifi network and launch a web browser. It's the same software you've been using to manage your Spectrum internet subscription and pay your Spectrum internet bill.

The cable wire should be connected to the Spectrum voice, internet, and wifi setup. Connect one end of the coax wire to the cable wall outlet and the other end to the modem. Connect one end of the coax wire to the cable wall outlet and the other end to the modem. If the address isn't printed there, then visit our website wirelessextendersetup.org our expert will guide you.

#internet #ip #login #setup #Spectrumwifisetup #wifi 

Linksys WiFi Extender Setup Easy Guide

In today's world, people require Linksys Extender Setup. People nowadays use specialized and high-frequency WiFi routers to meet their daily Internet needs.

 

Post image

However, routers display limited or even no internet access in various areas of the home or workplace. These particular areas are known as dead points or network zones. Instead of setting up a new router, experts recommend mounting a Linksys Extender setup to resolve the issue.

Let's use the Linksys Extender setup wizard to eliminate dead zones. However, you can access WiFi signals using your machine, PC, phone, and other network devices.

Your router would be connected to the internet securely.

Enter the SSID and password for your wireless network.

During the installation, the Linksys WiFi Extender and Router are in the exact location.

It's a good idea to start the Linksys extender Setup is currently under process.

New Extender Setup by Manual Process

As the name implies, setup requires user action. To manually configure a Linksys WiFi Extender, perform the following steps:

Connect the power supply switch to the Linksys WiFi Range Extensor.

Connect your Linksys wifi range extender with an Ethernet cable to your WiFi modem or router.

Start your browser and navigate to extender.linksys.com or enter the IP address of your Linksys WiFi Extender.

When you visit extender.linksys.com, a new window will appear on your desktop, prompting you to enter your Linksys Extender login information.

Enter the necessary information and then click the 'Log In' button.

Follow the on-screen instructions.

When finished, click the 'Edit' button to save the change.

Through Linksys Extender Setup, you can repeat the Wireless Signal of any access point or router for Internet connectivity. For Linksys Wifi Extender Setup, go to 192.168.1.1 or wirelessextendersetup.org

 #wifi #setup #Linksys #extender #technology #usa #tech #internet 

Lawson  Wehner

Lawson Wehner

1660273860

Flutter plugin to scan for nearby visible WiFi access points

This plugin allows Flutter apps to scan for nearby visible WiFi access points.

This plugin is part of WiFiFlutter suite, enabling various WiFi services for Flutter.

Platform Support

PlatformStatusMin. VersionAPINotes
Android✔️16 (J)Scan related APIs in WifiManager [Guide]For SDK >= 26(O) scans are throttled.
iOS✔️9.0No public API, requires special entitlements from AppleStub implementation with sane returns.

Usage

The entry point for the plugin is the singleton instance WiFiScan.instance.

Check support

You can check if the platform has Wi-Fi scan capabilities with WiFiScan.hasCapability API, as shown below:

void _scan() async {
  if(await WiFiScan.instance.hasCapability()){
    // can safely call scan related functionalities
  } else {
    // fallback mechanism, like - show user that "scan" is not possible 
  }
}

For more details, you can read documentation of WiFiScan.hasCapability.

Start scan

You can trigger full WiFi scan with WiFiScan.startScan API, as shown below:

void _startScan() async {
  // start full scan async-ly
  final error = await WiFiScan.instance.startScan(askPermissions: true);
  if (error != null) {
    switch(error) {
      // handle error for values of StartScanErrors
    }
  }
}

For more details, you can read documentation of WiFiScan.startScan, StartScanErrors and Result<ValueType, ErrorType>.

Get scanned results

You can get scanned results with WiFiScan.getScannedResults API, as shown below:

void _getScannedResults() async {
  // get scanned results
  final result = await WiFiScan.instance.getScannedResults(askPermissions: true);
  if (result.hasError){
    switch (error){
      // handle error for values of GetScannedResultErrors
    }
  } else {
    final accessPoints = result.value;
    // ...
  }
}

NOTE: getScannedResults API can be used independently of startScan API. This returns the latest available scanned results.

For more details, you can read documentation of WiFiScan.getScannedResults, WiFiAccessPoint, GetScannedResultsErrors and Result<ValueType, ErrorType>.

Get notified when scanned results available

You can get notified when new scanned results are available with WiFiScan.onScannedResultsAvailable API, as shown below:

// initialize accessPoints and subscription
List<WiFiAccessPoint> accessPoints = [];
StreamSubscription<Result<List<WiFiAccessPoint>, GetScannedResultErrors>>? subscription;

void _startListeningToScannedResults() async {
  // listen to onScannedResultsAvailable stream
  subscription = WiFiScan.instance.onScannedResultsAvailable.listen((result) {
    if (result.hasError){
      switch (error){
      // handle error for values of GetScannedResultErrors
      }  
    } else {
      // update accessPoints
      setState(() => accessPoints = result.value);
    }
  });
}

// make sure to cancel subscription after you are done
@override
dispose() {
  super.dispose();
  subscription?.cancel();
}

Additionally, WiFiScan.onScannedResultsAvailable API can also be used with Flutter's StreamBuilder widget.

NOTE: onScannedResultsAvailable API can be used independently of startScan API. The notification can also be result of a full scan performed by platform or other app.

For more details, you can read documentation of WiFiScan.onScannedResultsAvailable, WiFiAccessPoint, GetScannedResultsErrors and Result<ValueType, ErrorType>.

Installing

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add wifi_scan

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:
  wifi_scan: ^0.3.0

Alternatively, your editor might support flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:wifi_scan/wifi_scan.dart';

example/lib/main.dart

import 'dart:async';

import 'package:flutter/foundation.dart';
import 'package:flutter/material.dart';
import 'package:wifi_scan/wifi_scan.dart';

void main() {
  runApp(const MyApp());
}

/// Example app for wifi_scan plugin.
class MyApp extends StatefulWidget {
  /// Default constructor for [MyApp] widget.
  const MyApp({Key? key}) : super(key: key);

  @override
  State<MyApp> createState() => _MyAppState();
}

class _MyAppState extends State<MyApp> {
  List<WiFiAccessPoint> accessPoints = <WiFiAccessPoint>[];
  StreamSubscription<Result<List<WiFiAccessPoint>, GetScannedResultsErrors>>?
      subscription;

  bool get isStreaming => subscription != null;

  void _handleScannedResults(BuildContext context,
      Result<List<WiFiAccessPoint>, GetScannedResultsErrors> result) {
    if (result.hasError) {
      kShowSnackBar(context, "Cannot get scanned results: ${result.error}");
      setState(() => accessPoints = <WiFiAccessPoint>[]);
    } else {
      setState(() => accessPoints = result.value!);
    }
  }

  void _startListeningToScanResults(BuildContext context) {
    subscription = WiFiScan.instance.onScannedResultsAvailable
        .listen((result) => _handleScannedResults(context, result));
  }

  void _stopListteningToScanResults() {
    subscription?.cancel();
    setState(() => subscription = null);
  }

  // build row that can display info, based on label: value pair.
  Widget _buildInfo(String label, dynamic value) => Container(
        decoration: const BoxDecoration(
            border: Border(bottom: BorderSide(color: Colors.grey))),
        child: Row(
          children: [
            Text("$label: ",
                style: const TextStyle(fontWeight: FontWeight.bold)),
            Expanded(child: Text(value.toString()))
          ],
        ),
      );

  // build access point tile.
  Widget _buildAccessPointTile(BuildContext context, WiFiAccessPoint ap) {
    final title = ap.ssid.isNotEmpty ? ap.ssid : "**EMPTY**";
    final signalIcon =
        ap.level >= -80 ? Icons.signal_wifi_4_bar : Icons.signal_wifi_0_bar;
    return ListTile(
      visualDensity: VisualDensity.compact,
      leading: Icon(signalIcon),
      title: Text(title),
      subtitle: Text(ap.capabilities),
      onTap: () => showDialog(
        context: context,
        builder: (context) => AlertDialog(
          title: Text(title),
          content: Column(
            mainAxisSize: MainAxisSize.min,
            children: [
              _buildInfo("BSSDI", ap.bssid),
              _buildInfo("Capability", ap.capabilities),
              _buildInfo("frequency", "${ap.frequency}MHz"),
              _buildInfo("level", ap.level),
              _buildInfo("standard", ap.standard),
              _buildInfo("centerFrequency0", "${ap.centerFrequency0}MHz"),
              _buildInfo("centerFrequency1", "${ap.centerFrequency1}MHz"),
              _buildInfo("channelWidth", ap.channelWidth),
              _buildInfo("isPasspoint", ap.isPasspoint),
              _buildInfo("operatorFriendlyName", ap.operatorFriendlyName),
              _buildInfo("venueName", ap.venueName),
              _buildInfo("is80211mcResponder", ap.is80211mcResponder),
            ],
          ),
        ),
      ),
    );
  }

  @override
  void dispose() {
    super.dispose();
    // stop subscription for scanned results
    _stopListteningToScanResults();
  }

  @override
  Widget build(BuildContext context) {
    return MaterialApp(
      home: Scaffold(
        appBar: AppBar(
          title: const Text('Plugin example app'),
        ),
        body: FutureBuilder<bool>(
          future: WiFiScan.instance.hasCapability(),
          builder: (context, snapshot) {
            if (!snapshot.hasData) {
              return const Center(child: CircularProgressIndicator());
            }
            if (!snapshot.data!) {
              return const Center(child: Text("WiFi scan not supported."));
            }
            return Padding(
              padding: const EdgeInsets.symmetric(vertical: 12, horizontal: 20),
              child: Column(
                mainAxisSize: MainAxisSize.max,
                crossAxisAlignment: CrossAxisAlignment.start,
                children: [
                  Row(
                    mainAxisAlignment: MainAxisAlignment.spaceEvenly,
                    children: [
                      ElevatedButton.icon(
                        icon: const Icon(Icons.perm_scan_wifi),
                        label: const Text('SCAN'),
                        // call startScan and reset the ap list
                        onPressed: () async {
                          final error = await WiFiScan.instance.startScan();
                          kShowSnackBar(
                              context, "startScan: ${error ?? 'done'}");
                          setState(() => accessPoints = <WiFiAccessPoint>[]);
                        },
                      ),
                      ElevatedButton.icon(
                        icon: const Icon(Icons.refresh),
                        label: const Text('GET'),
                        // call getScannedResults and handle the result
                        onPressed: () async => _handleScannedResults(context,
                            await WiFiScan.instance.getScannedResults()),
                      ),
                      Row(
                        children: [
                          const Text("STREAM"),
                          Switch(
                              value: isStreaming,
                              onChanged: (shouldStream) => shouldStream
                                  ? _startListeningToScanResults(context)
                                  : _stopListteningToScanResults()),
                        ],
                      ),
                    ],
                  ),
                  const Divider(),
                  Flexible(
                    child: Center(
                      child: accessPoints.isEmpty
                          ? const Text("NO SCANNED RESULTS")
                          : ListView.builder(
                              itemCount: accessPoints.length,
                              itemBuilder: (context, i) =>
                                  _buildAccessPointTile(
                                      context, accessPoints[i])),
                    ),
                  ),
                ],
              ),
            );
          },
        ),
      ),
    );
  }
}

/// Show snackbar.
void kShowSnackBar(BuildContext context, String message) {
  if (kDebugMode) print(message);
  ScaffoldMessenger.of(context)
    ..hideCurrentSnackBar()
    ..showSnackBar(SnackBar(content: Text(message)));
}

Resources

Issues and feedback

Please file WiFiFlutter specific issues, bugs, or feature requests in our issue tracker.

To contribute a change to this plugin, please review plugin checklist for 1.0, our contribution guide and open a pull request.

Contributors ✨

Thanks goes to these 💖 people for their contributions.

This project follows the all-contributors specification. Contributions of any kind welcome!

Download Details:

Author: Flutternetwork
Source Code: https://github.com/flutternetwork/WiFiFlutter
License: MIT

#flutter #dart #wifi 

Flutter plugin to scan for nearby visible WiFi access points

Bun-wifi-name: Get Current Wifi Name in Bun/Node

bun-wifi-name

Get current wifi name in Bun/Node.

Install

bun add bun-wifi-name

Usage

import getWifiName from 'bun-wifi-name'

console.log(getWifiName())

Author: Wobsoriano
Source Code: https://github.com/wobsoriano/bun-wifi-name 
License: MIT license

#typescript #node #name #wifi 

Bun-wifi-name: Get Current Wifi Name in Bun/Node
Gordon  Murray

Gordon Murray

1659376620

Wifi_info_plugin_plus: Wifi info Wrapper Android Plugin

wifi_info_plugin_plus

Wifi info wrapper android plugin This package is a branch of wifi_info_plugin

Getting Started

This Plugin currently only supports android.

Below code exhibits usage of the plugin in a flutter application to retrieve Network info.

import 'package:flutter/services.dart';
import 'package:flutter/material.dart';
import 'dart:async';
import 'package:wifi_info_plugin_plus/wifi_info_plugin_plus.dart';

void main() => runApp(MyApp());

class MyApp extends StatefulWidget {
  @override
  _MyAppState createState() => _MyAppState();
}

class _MyAppState extends State<MyApp> {
  WifiInfoWrapper? _wifiObject;

  @override
  void initState() {
    super.initState();
    initPlatformState();
  }

  // Platform messages are asynchronous, so we initialize in an async method.
  Future<void> initPlatformState() async {
    WifiInfoWrapper? wifiObject;
    // Platform messages may fail, so we use a try/catch PlatformException.
    try {
      wifiObject = await WifiInfoPlugin.wifiDetails;
    } on PlatformException {}
    if (!mounted) return;

    setState(() {
      _wifiObject = wifiObject;
    });
  }

  @override
  Widget build(BuildContext context) {
    String ipAddress = _wifiObject != null ? _wifiObject!.ipAddress.toString() : "...";

    String macAddress = _wifiObject != null ? _wifiObject!.macAddress.toString() : '...';
    String connectionType = _wifiObject != null ? _wifiObject!.connectionType.toString() : 'unknown';

    return MaterialApp(
      home: Scaffold(
        appBar: AppBar(
          title: const Text('Plugin example app'),
        ),
        body: Column(mainAxisAlignment: MainAxisAlignment.center, children: [
          Center(
            child: Text('Running on IP:' + ipAddress),
          ),
          Center(
            child: Text('Running on Mac:' + macAddress),
          ),
          Center(
            child: Text('Connection type:' + connectionType),
          ),
        ]),
      ),
    );
  }
}

Below are valid getters on the WifiWrapper Class at instantiation

  • ipAddress
  • routerIp
  • dns1
  • dns2
  • bssId
  • ssid
  • macAddress
  • linkSpeed
  • signalStrength
  • frequency
  • networkId
  • connectionType
  • isHiddenSSid

Installing

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add wifi_info_plugin_plus

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:
  wifi_info_plugin_plus: ^2.0.2

Alternatively, your editor might support flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:wifi_info_plugin_plus/wifi_info_plugin_plus.dart';

example/lib/main.dart

import 'package:flutter/services.dart';
import 'package:flutter/material.dart';
import 'dart:async';
import 'package:wifi_info_plugin_plus/wifi_info_plugin_plus.dart';

void main() => runApp(MyApp());

class MyApp extends StatefulWidget {
  @override
  _MyAppState createState() => _MyAppState();
}

class _MyAppState extends State<MyApp> {
  WifiInfoWrapper? _wifiObject;

  @override
  void initState() {
    super.initState();
    initPlatformState();
  }

  // Platform messages are asynchronous, so we initialize in an async method.
  Future<void> initPlatformState() async {
    WifiInfoWrapper? wifiObject;
    // Platform messages may fail, so we use a try/catch PlatformException.
    try {
      wifiObject = await WifiInfoPlugin.wifiDetails;
    } on PlatformException {}
    if (!mounted) return;

    setState(() {
      _wifiObject = wifiObject;
    });
  }

  @override
  Widget build(BuildContext context) {
    String ipAddress = _wifiObject != null ? _wifiObject!.ipAddress.toString() : "...";

    String macAddress = _wifiObject != null ? _wifiObject!.macAddress.toString() : '...';
    String connectionType = _wifiObject != null ? _wifiObject!.connectionType.toString() : 'unknown';

    return MaterialApp(
      home: Scaffold(
        appBar: AppBar(
          title: const Text('Plugin example app'),
        ),
        body: Column(mainAxisAlignment: MainAxisAlignment.center, children: [
          Center(
            child: Text('Running on IP:' + ipAddress),
          ),
          Center(
            child: Text('Running on Mac:' + macAddress),
          ),
          Center(
            child: Text('Connection type:' + connectionType),
          ),
        ]),
      ),
    );
  }
}

Author: Brasizza
Source Code: https://github.com/brasizza/flutter_wifi_info_plugin
License: BSD-3-Clause license

#flutter #dart #wifi 

Wifi_info_plugin_plus: Wifi info Wrapper Android Plugin
Mike  Kozey

Mike Kozey

1659150127

Flutter_iot_wifi: Connect to an IoT Access Point using Android or iOS

flutter_iot_wifi

Connect to an IoT access point using Android or iOS

Android Support

Currently requires Version >= Android Q

Android Permissions

<uses-permission android:name="android.permission.ACCESS_WIFI_STATE" />
<uses-permission android:name="android.permission.CHANGE_WIFI_STATE" />
<uses-permission android:name="android.permission.CHANGE_NETWORK_STATE" />
<uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" /> !!! Android < 29 Required to scan !!!
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" /> !!! Android >= 29 Required to scan !!!

NOTE: Explicit requesting of permissions (e.g. with permission_handler) is required with newer versions.

iOS Support

Minimum iOS >= 11.0, iOS >= 13.0 required for prefix connect

iOS Entitlements

<key>com.apple.developer.networking.HotspotConfiguration</key>
<true/>
<key>com.apple.developer.networking.wifi-info</key>
<true/>

iOS Info.plist

<key>NSLocationWhenInUseUsageDescription</key>
<string>XXXXXX</string>

Installing

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add flutter_iot_wifi

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:  flutter_iot_wifi: ^0.0.3

Alternatively, your editor might support flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:flutter_iot_wifi/flutter_iot_wifi.dart';

example/lib/main.dart

import 'dart:io';import 'package:flutter/material.dart';import 'package:flutter_iot_wifi/flutter_iot_wifi.dart';import 'package:permission_handler/permission_handler.dart';void main() {  runApp(const MyApp());}class MyApp extends StatelessWidget {  const MyApp({Key? key}) : super(key: key);  @override  Widget build(BuildContext context) {    return MaterialApp(      home: Scaffold(        appBar: AppBar(          title: const Text('FlutterIotWifi Example'),        ),        body: const Center(          child: AccessPointWidget(),        ),      ),    );  }}class AccessPointWidget extends StatelessWidget {  const AccessPointWidget({Key? key}) : super(key: key);  final String ssid = "Example"; // TODO replace with your ssid  final String password = "12345678"; // TODO replace with your password  Future<bool> _checkPermissions() async {    if (Platform.isIOS || await Permission.location.request().isGranted) {      return true;    }    return false;  }  void _connect() async {    if (await _checkPermissions()) {      FlutterIotWifi.connect(ssid, password, prefix: true).then((value) => print("connect initiated: $value"));    } else {      print("don't have permission");    }  }  void _disconnect() async {    if (await _checkPermissions()) {      FlutterIotWifi.disconnect().then((value) => print("disconnect initiated: $value"));    } else {      print("don't have permission");    }  }  void _scan() async {    if (await _checkPermissions()) {      FlutterIotWifi.scan().then((value) => print("scan started: $value"));    } else {      print("don't have permission");    }  }  void _list() async {    if (await _checkPermissions()) {      FlutterIotWifi.list().then((value) => print("ssids: $value"));    } else {      print("don't have permission");    }  }  void _current() async {    if (await _checkPermissions()) {      FlutterIotWifi.current().then((value) => print("current ssid: $value"));    } else {      print("don't have permission");    }  }  @override  Widget build(BuildContext context) {    return Column(      crossAxisAlignment: CrossAxisAlignment.stretch,      mainAxisAlignment: MainAxisAlignment.spaceEvenly,      children: [        Center(child: Text("SSID: $ssid, PASSWORD: $password")),        _CustomButton(onPressed: _connect, child: const Text("Connect")),        _CustomButton(onPressed: _disconnect, child: const Text("Disconnect")),        _CustomButton(onPressed: _scan, child: const Text("Scan (Android only)")),        _CustomButton(onPressed: _list, child: const Text("List (Android only)")),        _CustomButton(onPressed: _current, child: const Text("Current")),      ],    );  }}class _CustomButton extends StatelessWidget {  const _CustomButton({Key? key, required this.onPressed, required this.child}) : super(key: key);  final VoidCallback onPressed;  final Widget child;  @override  Widget build(BuildContext context) {    return SizedBox(height: 40, child: ElevatedButton(onPressed: onPressed, child: child));  }}

Author: MousyBusiness
Source Code: https://github.com/MousyBusiness/flutter_iot_wifi 
License: MIT license

#flutter #dart #iot #wifi 

Flutter_iot_wifi: Connect to an IoT Access Point using Android or iOS
Lawson  Wehner

Lawson Wehner

1658877060

Flutter Plugin to Easily Provision WiFi Credentials To A Peer Device

wifi_easy_connect [COMING SOON]

Flutter plugin to easily provision WiFi credentials to a peer device.

Installing

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add wifi_easy_connect

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:
  wifi_easy_connect: ^0.0.1

Alternatively, your editor might support flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:wifi_easy_connect/wifi_easy_connect.dart';

example/lib/main.dart

import 'package:flutter/material.dart';
import 'dart:async';

import 'package:flutter/services.dart';
import 'package:wifi_easy_connect/wifi_easy_connect.dart';

void main() {
  runApp(const MyApp());
}

class MyApp extends StatefulWidget {
  const MyApp({Key? key}) : super(key: key);

  @override
  State<MyApp> createState() => _MyAppState();
}

class _MyAppState extends State<MyApp> {
  String _platformVersion = 'Unknown';

  @override
  void initState() {
    super.initState();
    initPlatformState();
  }

  // Platform messages are asynchronous, so we initialize in an async method.
  Future<void> initPlatformState() async {
    String platformVersion;
    // Platform messages may fail, so we use a try/catch PlatformException.
    // We also handle the message potentially returning null.
    try {
      platformVersion =
          await WifiEasyConnect.platformVersion ?? 'Unknown platform version';
    } on PlatformException {
      platformVersion = 'Failed to get platform version.';
    }

    // If the widget was removed from the tree while the asynchronous platform
    // message was in flight, we want to discard the reply rather than calling
    // setState to update our non-existent appearance.
    if (!mounted) return;

    setState(() {
      _platformVersion = platformVersion;
    });
  }

  @override
  Widget build(BuildContext context) {
    return MaterialApp(
      home: Scaffold(
        appBar: AppBar(
          title: const Text('Plugin example app'),
        ),
        body: Center(
          child: Text('Running on: $_platformVersion\n'),
        ),
      ),
    );
  }
}

Getting Started

This project is a starting point for a Flutter plug-in package, a specialized package that includes platform-specific implementation code for Android and/or iOS.

For help getting started with Flutter, view our online documentation, which offers tutorials, samples, guidance on mobile development, and a full API reference.

Original article source at: https://pub.dev/packages/wifi_easy_connect 

#flutter #dart #wifi 

Flutter Plugin to Easily Provision WiFi Credentials To A Peer Device

A Simple Wifi Manager for Flutter

better_wifi_manager

A simple Wifi manager for Flutter.

Install Started

  1. Add this to your pubspec.yaml file:
dependencies:
  better_wifi_manager: ^0.0.5
  1. Install it
$ flutter packages get
  1. Config permission <br/>

iOS

TARGETS -> Signing $ Capabilities -> +Capability -> Access WiFi Information. <br/> Info.plist -> add Privacy - NSLocationWhenInUseUsageDescription. Info.plist -> add Privacy - NSLocationTemporaryUsageDescriptionDictionary.

Android

AndroidManifest.xml

<uses-permission android:name="android.permission.ACCESS_WIFI_STATE" />
<uses-permission android:name="android.permission.CHANGE_WIFI_STATE" />
<uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" />
<uses-permission android:name="android.permission.ACCESS_COARSE_LOCATION" />
<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION" />

Normal usage

ensure wifi is opened.

request location permission. 2.1 request accuracy location permission for iOS.

get wifi info or scan wifi list.

  final currentSSID = await wifiManager.getWifiInfo();

  scanResultSubscription = wifiManager.scanResultStream.listen((event) {
    scanResultSubscription?.cancel();
    final scanResult = event["scanResult"].toString();
    if (scanResult.isNotEmpty) {
      List<WifiScanResult> wifiScanResultList = jsonDecode(scanResult)
          .map((e) {
            return WifiScanResult().wifiScanResultEntityFromJson(e);
          })
          .cast<WifiScanResult>()
          .toList();

      setState(() {
        this.wifiScanResult = wifiScanResultList;
      });
    }
  });
  await wifiManager.scanWifi();

Feature

  • [x] determine WiFi enable.
  • [x] get WiFi info.
  • [x] scan wifi. (only Android)

Use this package as a library

Depend on it

Run this command:

With Flutter:

 $ flutter pub add better_wifi_manager

This will add a line like this to your package's pubspec.yaml (and run an implicit flutter pub get):

dependencies:
  better_wifi_manager: ^0.0.5

Alternatively, your editor might support flutter pub get. Check the docs for your editor to learn more.

Import it

Now in your Dart code, you can use:

import 'package:better_wifi_manager/better_wifi_manager.dart'; 

example/lib/main.dart

import 'dart:convert';
import 'dart:io';

import 'package:flutter/cupertino.dart';
import 'package:flutter/material.dart';
import 'dart:async';

import 'package:flutter/services.dart';
import 'package:better_wifi_manager/better_wifi_manager.dart';
import 'package:permission_handler/permission_handler.dart';

void main() {
  runApp(MyApp());
}

class MyApp extends StatefulWidget {
  @override
  _MyAppState createState() => _MyAppState();
}

class _MyAppState extends State<MyApp> {
  final wifiManager = BetterWifiManager();

  bool wifiState = false;
  bool locationState = false;

  String currentSSID = "";
  List<WifiScanResult> wifiScanResult = [];

  StreamSubscription scanResultSubscription;

  @override
  void initState() {
    super.initState();

    PermissionHandler().requestPermissions([PermissionGroup.locationWhenInUse]).then((value) async {
      if (value.values.first == PermissionStatus.granted) {
        if (Platform.isIOS) {
          final result = await BetterWifiManager.requestTemporaryFullAccuracyAuthorization();
          print("result $result");
        }
      }
    });
  }

  @override
  void dispose() {
    scanResultSubscription?.cancel();
    super.dispose();
  }

  @override
  Widget build(BuildContext context) {
    return MaterialApp(
      home: Scaffold(
        appBar: AppBar(
          title: const Text('Plugin example app'),
        ),
        body: Container(
          constraints: BoxConstraints.expand(),
          child: Column(
            children: [
              CupertinoButton(
                child: Text("getWifiState"),
                onPressed: () async {
                  final result = await wifiManager.isWifiOpen();
                  setState(() {
                    wifiState = result;
                  });
                },
              ),
              CupertinoButton(
                child: Text("pushToWifiSetting"),
                onPressed: () => wifiManager.pushToWifiSettingPage(),
              ),
              CupertinoButton(
                child: Text("getLocationState"),
                onPressed: () async {
                  final result = await wifiManager.isLocationOpen();
                  setState(() {
                    locationState = result;
                  });
                },
              ),
              CupertinoButton(
                child: Text("pushToLocationSettingPage"),
                onPressed: () => wifiManager.pushToLocationSettingPage(),
              ),
              CupertinoButton(
                child: Text("getWifiInfo"),
                onPressed: () async {
                  final currentSSID = await wifiManager.getWifiInfo();
                  setState(() {
                    this.currentSSID = currentSSID;
                  });
                },
              ),
              CupertinoButton(
                child: Text("scanWifi"),
                onPressed: () async {
                  scanResultSubscription?.cancel();
                  scanResultSubscription = wifiManager.scanResultStream.listen((event) {
                    scanResultSubscription?.cancel();
                    final scanResult = event["scanResult"].toString();
                    if (scanResult.isNotEmpty) {
                      List<WifiScanResult> wifiScanResultList = jsonDecode(scanResult)
                          .map((e) {
                            return WifiScanResult().wifiScanResultEntityFromJson(e);
                          })
                          .cast<WifiScanResult>()
                          .toList();

                      setState(() {
                        this.wifiScanResult = wifiScanResultList;
                      });
                    }
                  });
                  await wifiManager.scanWifi();
                },
              ),
              Align(
                alignment: Alignment.center,
                child: Row(
                  mainAxisSize: MainAxisSize.min,
                  children: [
                    Text("WiFi : ${wifiState ? '🟢' : '🔴'}"),
                    SizedBox(
                      width: 20,
                    ),
                    Text("Location : ${locationState ? '🟢' : '🔴'}"),
                  ],
                ),
              ),
              Padding(
                padding: const EdgeInsets.all(8.0),
                child: Text(
                  "ssid: $currentSSID",
                  style: TextStyle(fontSize: 18, color: Colors.red),
                ),
              ),
              Expanded(
                child: SingleChildScrollView(
                  child: Column(
                    crossAxisAlignment: CrossAxisAlignment.start,
                    children: wifiScanResult.map((e) => Text(e.toString())).toList(),
                  ),
                ),
              ),
            ],
          ),
        ),
      ),
    );
  }
} 

Download Details:

Author: WangYng

Source Code: https://github.com/WangYng/better_wifi_manager

#flutter #wifi #management 

A Simple Wifi Manager for Flutter
Desmond  Gerber

Desmond Gerber

1652095740

Wifi: NodeJS tool To Manage Wifi (Connections, Scans)

We think about switching to ES Modules only for next major release. We would like to have your opinion on this. Please consider leave a comment in the discussion thread.

I am looking for maintainers who could help me to handle all improvements and bug fixes about this project because the hardware/os dependencies make it quite hard to test.

The node-wifi module allows macOS, windows and linux users to interact with surrounding wifi networks through various methods. These methods include scanning for wifi access points and connecting to these access points.

FeaturesLinuxMacWindows
Connect
Scan
List current wifi connections
Disconnect 
Delete connection information 

We wish to be clear in saying that this module is inspired from node-wifi-control but with some slight modifications to certain functions such as the various OS-specific parsers for terminal output as we noticed that these parsers did not work well on certain operating systems.

As everything with hardware dependencies, weird behaviors may happen depending of your configuration. You should never hesitate to notify us about a specificity of your OS/Hardware/Wifi card/whatever.


Install

# Use as a module
npm install node-wifi

Getting started

const wifi = require('node-wifi');

// Initialize wifi module
// Absolutely necessary even to set interface to null
wifi.init({
  iface: null // network interface, choose a random wifi interface if set to null
});

// Scan networks
wifi.scan((error, networks) => {
  if (error) {
    console.log(error);
  } else {
    console.log(networks);
    /*
        networks = [
            {
              ssid: '...',
              bssid: '...',
              mac: '...', // equals to bssid (for retrocompatibility)
              channel: <number>,
              frequency: <number>, // in MHz
              signal_level: <number>, // in dB
              quality: <number>, // same as signal level but in %
              security: 'WPA WPA2' // format depending on locale for open networks in Windows
              security_flags: '...' // encryption protocols (format currently depending of the OS)
              mode: '...' // network mode like Infra (format currently depending of the OS)
            },
            ...
        ];
        */
  }
});

// Connect to a network
wifi.connect({ ssid: 'ssid', password: 'password' }, () => {
  console.log('Connected'); 
  // on windows, the callback is called even if the connection failed due to netsh limitations
  // if your software may work on windows, you should use `wifi.getCurrentConnections` to check if the connection succeeded
});

// Disconnect from a network
// not available on all os for now
wifi.disconnect(error => {
  if (error) {
    console.log(error);
  } else {
    console.log('Disconnected');
  }
});

// Delete a saved network
// not available on all os for now
wifi.deleteConnection({ ssid: 'ssid' }, error => {
  if (error) {
    console.log(error);
  } else {
    console.log('Deleted');
  }
});

// List the current wifi connections
wifi.getCurrentConnections((error, currentConnections) => {
  if (error) {
    console.log(error);
  } else {
    console.log(currentConnections);
    /*
    // you may have several connections
    [
        {
            iface: '...', // network interface used for the connection, not available on macOS
            ssid: '...',
            bssid: '...',
            mac: '...', // equals to bssid (for retrocompatibility)
            channel: <number>,
            frequency: <number>, // in MHz
            signal_level: <number>, // in dB
            quality: <number>, // same as signal level but in %
            security: '...' //
            security_flags: '...' // encryption protocols (format currently depending of the OS)
            mode: '...' // network mode like Infra (format currently depending of the OS)
        }
    ]
    */
  }
});

// All functions also return promise if there is no callback given
wifi
  .scan()
  .then(networks => {
    // networks
  })
  .catch(error => {
    // error
  });

Use as CLI

node-wifi is also usable as a CLI tool with the library node-wifi-cli.

Platforms compatibility

This project is tested with operating systems:

  • macOS Catalina 10.15.5
  • macOS Big Sur 11.5.1
  • linux Ubuntu 18.04.3 LTS

Do not hesitate to create a pull request to add the OS you are using.

Dependencies

Linux:

  • network-manager (nmcli)

Windows:

  • netsh

MacOS:

  • airport
  • networksetup

Contribute

Please read development guidelines before proposing a pull request.

Roadmap

  •  add conventional commits
  •  plug to travis
  •  add github templates
  •  add eslint
  •  add prettier
  •  switch to MIT license
  •  generate changelog and release note
  •  stdout how to reproduce bug
  •  use github actions
  •  add unit tests (in progress)
  •  rewrite the library using ES7 (in progress)
  •  harmonize security flags and modes
  •  install commitizen
  •  use xml to stabilize parsers

Author: Friedrith
Source Code: https://github.com/friedrith/node-wifi 
License: MIT license

#node #hardware #wifi 

Wifi: NodeJS tool To Manage Wifi (Connections, Scans)
曾 俊

曾 俊

1650722400

4款路由器横评!WiFi6香不香?TP-LINK电信定制版有啥区别?

一款好的路由器,不但网速要快,穿墙要厉害。而且稳定性要好,颜值也不能太丑
所以今天Yo哥就横评四款来自TP-link的热门路由器!分别是销量很高的AC1200
电信定制版的WTC181、WTA301,以及WTA541
四台设备均来自B站数码区众测活动
对WiFi6路由感兴趣的小伙伴,一定要看完!
别忘点赞!谢谢~

#wifi #tplink 

4款路由器横评!WiFi6香不香?TP-LINK电信定制版有啥区别?
曾 俊

曾 俊

1648692300

Wi-Fi密码为何那么容易被攻破?

aircrack-ng 命令的详细解释

aircrack-ng

sudo -i  :管理员权限

ifconfig :查看当前的网卡信息

airmon-ng:检查网卡是否支持监听功能的

airmon-ng start wlan0 :激活无线网卡的监听模式

airodump-ng wlan0 :扫描当前周边环境的WiFi信号


下面里的部分信息根据自己的情况进行替换

抓包命令:airodump-ng -c 11 –bssid 60:32:B1:56:3F:B2 -w /home/lingdu/桌面/handshake wlan0

ACK 死亡攻击:aireplay-ng -0 10 -a 60:32:B1:56:3F:B2 -c F0:72:EA:E8:72:21 wlan0

暴力破解命令:
aircrack-ng -w /home/lingdu/桌面/password.txt -b 60:32:B1:56:3F:B2 /home/lingdu/桌面/handshake-0*.cap

密码字典:

Github字典下载:【点击下载

加强版(来源网络):【点击下载
 

#wifi

Wi-Fi密码为何那么容易被攻破?
曾 俊

曾 俊

1648681200

让您的Wi-Fi 网速更快!只需一个简单的设置!

使用 WirelessMon 监控 wi-fi 适配器的状态并实时收集有关附近接入点和热点的信息。

WirelessMon 提供信号电平和实时 IP 以及 802.11 WiFi 统计数据的综合图表。它可以将收集到的所有无线信息记录到一个文件中,以供存档和将来参考。

 

 

官方下载地址:http://www.wirelessmon.com

WirelessMon是 PassMark Software 的软件工具,可让您:

  • 验证 802.11 网络配置是否正确。
  • 测试 WiFi 硬件和设备驱动程序是否正常运行。
  • 检查本地 WiFi 网络和附近网络的信号电平。
  • 帮助定位网络的干扰源。
  • 扫描您当地的热点(非常适合驾驶!)
  • 创建一个区域的信号强度图
  • GPS 支持记录和映射信号强度
  • 正确定位您的无线天线(对于定向天线尤其重要)。
  • 验证本地接入点的安全设置。
  • 测量网络速度和吞吐量并查看可用数据速率。
  • 帮助检查 wi-fi 网络覆盖范围和范围

无线局域网信息

WirelessMon 可以显示以下无线 LAN 信息,作为被监控无线适配器上的一项功能。请注意,并非所有适配器都支持所有功能。

  • 当前连接信息: SSID;连接的接入点 MAC 地址;信号强度; 发射功率;认证类型;RTS 阈值;碎片阈值;频道正在使用中;使用频率;天线数量;信标期;ATIM 窗口;停留时间; 跳模式;跳集。
  • 统计信息:上报30多个参数。包括发送和接收帧的详细分解、错误计数、传输重试计数器和相关的低级数据。
  • IP信息:上报当前TCP/IP连接的信息。包括适配器MAC地址;适配器设备驱动名称;IP地址;子网掩码; 如果启用了 DHCP;网关地址和 DHCP 服务器 IP 地址。
  • IP 计数器信息:监控和显示网络吞吐量。这包括网络适配器硬件可用的最大带宽、当前以每秒字节数和每秒数据包数为单位的发送和接收数据速率,以及错误计数器。

#ip #Wireless #wifi 

让您的Wi-Fi 网速更快!只需一个简单的设置!

Returns A Latitude & A Longitude Given an Array Of Wifi Access Points

geocode-wifi

Returns a latitude and a longitude given an array of wifi access points.

Installation

npm install geocode-wifi

Usage

This module needs network access in order to communicate with Google so it can triangulate the provided access points.

var geocodeWifi = require('geocode-wifi')

var towers = [
  { mac: '0e:1d:41:0c:22:d4', ssid: 'NodeConf', signal: -72 },
  { mac: '01:1c:ef:0c:21:2a', ssid: 'NSA Lobby', signal: -2 },
  { mac: 'e0:53:41:92:00:bb', ssid: 'Microsoft Taco', signal: -89 }
]

geocodeWifi(towers, function (err, location) {
  if (err) throw err
  console.log(location) // => { lat: 38.0690894, lng: -122.8069356, accuracy: 42 }
})

Geocode-wifi have special support for the node-wifiscanner module. This means you can parse the output of node-wifiscanner directly into geocode-wifi:

var geocodeWifi = require('geocode-wifi')
var wifiScanner = require('node-wifiscanner')

wifiScanner.scan(function (err, towers) {
  if (err) throw err

  geocodeWifi(towers, function (err, location) {
    if (err) throw err

    console.log(location) // => { lat: 38.0690894, lng: -122.8069356, accuracy: 42 }
  })
})

Author: Watson
Source Code: https://github.com/watson/geocode-wifi 
License: MIT License

#wifi #network  #javascript 

Returns A Latitude & A Longitude Given an Array Of Wifi Access Points